Database Users

Bad replacement niki?

I had sent a phone in for repair, which was then said to be unrepairable and so I was given a replacement niki (however the replacement was a refurbished one).
Its only been a week or so but I have had major problems with calls. Most of the time I cant make or receive calls even though the signal bar has two or three bars. The phone says its dialing but it doesnt and ends the call automatically. If I ring my phone it goes straight to voicemail! Note that I said "most of the time" because my phone calls do go through soemtimes but thats like once every 20 or so tries or if I make a phone call immediately after a soft reset or just get lucky!
The other functions of the phone work fine. I have done a hard reset thinking it was something I installed but the problem is still there. Done another 4 hard resets (each time trying something different like taking the battery out before the custom orange stuff is installed) but with no change.
I did a search and came across another thread but it wasnt really solved and blamed it on S2U2. Obviously S2U2 cant be the cause for me since the problem is there even after a hard reset. (http://forum.xda-developers.com/archive/index.php/t-393077.html and http://forum.xda-developers.com/showthread.php?t=387615)
Im thinking it could be that the radio version is old (since it is a refurbed version) and also I remember reading about poor signals some time ago which was solved by changing the radio version (and is also probably why I didnt have this problem with my original niki).
Note: I have also tried the sim in another normal phone (samsung e900) and it worked fine so this is definately a problem with the touch dual.
A little bit of info:
Im with orange in the Uk,
the ROM version is 1.31.61.10 with a ROM date 10/30/07
and the Radio version is 1.58.16.27.
(Also...I havent done a radio update because I am still under warranty but I would like to know if it could be causing the problem or if it is a hardware problem).
Thanks for reading this long post (didnt think it would turn out so long, lol), but ANY help or advice will be appreciated.

well it sounds like a bad signal, so unless you want to unlock yor phone and try the modded sedna radio (best) id just send it back and complain loudly

Problems with Xda Exec, sound dont work

I have a problem with my Xda Exec, the sound dont work and also the microphone only works the phone speaker, i can hear the tone but i cant speak, anybody knows how to fix it?
thanks a lot,
KALRONG

kalrong said:
I have a problem with my Xda Exec, the sound dont work and also the microphone only works the phone speaker, i can hear the tone but i cant speak, anybody knows how to fix it?
thanks a lot,
KALRONG
Click to expand...
Click to collapse
Welcome tot he forum
Hoping that is not a hardware related problem I would do a reflash to try to solve it
Read in the Wiki on how to
Hope it helped,

That happens one day in the car travelling home that the sound suddly stop working i restart the xda and everything (not reflash) but nothing work i will try to reflash it because i think is not a hardware problem

is the first time i try to reflash my pda but i have a problem when i try to downgrade it that shows error 260 and i dont know how to fix it

ok, i fix the problem with upgrade xD my english is not good at all and i missunderstand some of the instructions, but after read 100k of threats and 5 hours trying things now is upgrading to tomal rom i hope that this will fix the problem i had before

after reflashing the ce two times the sound is still not working, i am updating now the radio from 1.09 to 1.15, the stereo speakers make a little bit of noise when a sound is played, the headphones dont work, the phone speaker works propertly, and the microphone works but only send the voice to the phone speaker ¿? i dont know why happens this last thing

radio updated and the problem continues anybody can help?

I think it´s a hardware related problem
Try to take it to a repair center
Good luck,

I have the same problem. When a sound is played it just clicks and that's all. I had a problem with my ribon cable and I took it out. I've done that before (it's my second cable failing), so I knew what I was doing. I was off for a about a month untill I got a now cable. When I put it back together, I had no sound, just that click thing. I can't take it to a repair center. If anyone has a solution, please share.

I also found that my camera does not work. It says Failed to initialize camera. 36001:100:1. I tried a different rom, but still have the problem.
Also I tried to make a phone call (I'm not using it as a main phone, that's why I just found that out) and I can hear the other person, but they can't hear me.

lostbrain said:
I also found that my camera does not work. It says Failed to initialize camera. 36001:100:1. I tried a different rom, but still have the problem.
Also I tried to make a phone call (I'm not using it as a main phone, that's why I just found that out) and I can hear the other person, but they can't hear me.
Click to expand...
Click to collapse
So now 2 things not working...
Don´t hessitate men take it to a repair center!

lostbrain said:
I also found that my camera does not work. It says Failed to initialize camera. 36001:100:1. I tried a different rom, but still have the problem.
Also I tried to make a phone call (I'm not using it as a main phone, that's why I just found that out) and I can hear the other person, but they can't hear me.
Click to expand...
Click to collapse
i also check my camera after reading your comment and i also have the same problem, next month (because this month i will travel and i cant do it) i will send it to repair a tell you what the solution could be
PD: orb3000 muchas gracias por ser tan atento

I have good news. Something happened. I dont know what i did... but i got my sound back (and camera. main camera at least).
As you I flashed the rom, then the radio rom and I still got the problem. So I thought I'll leave it like that untill I find a solution. And I thought.. well i can at least play some games on it and I downloaded Archibald. I put it on the phone. Started it and ?! I had sound. Again I dont know if I did something before that, but I got it working. I'll attach the game, maybe it did something. Give it a try.
Again I have no idea what I did. It might have some bad connections somewhere. I remember I had the same problem (either with the Universal or the Wizard) but dont remember how I fixed it.
Here is a link for the game:

i install it but the miracle didnt happens i also will try to remove the battery it have on the motherboard to make a cmos clear (like in a normal computer). Lucky you i will keep trying

I'm sorry to hear that. I didn't if it matters but my small mb battery is dead. Apperantly it died during the month the battery was out. Everything works except that when I do a soft reset, the clock resets too.

I have these problems too, does anyone know the specification of the mobo battery?
I have the sound problem but mine doesnt work even with headphones in and i also have a problem with the keys being activated when the screen is in a certain position. Could all of these problems be casued by the ribbon cable?Rob

As far as my expirience goes with the ribon cable, it commands the touch, the lcd, mic, speaker on the lcd part. the keyboard has it's own cable. and it snaps to the motherboard. maybe it's loose or something. For the battery I got http://cgi.ebay.com/Dopod-D900-900-T-mobile-MDA-IV-Qtek-9000-backup-Battery_W0QQitemZ350170469398QQcmdZViewItemQQptZGPS_Accessories_Cablesthis on ebay. But mine looks a little different.

also happens to me when i make a soft reset the clock also restart could be all because the mb battery is dead?

OK, we are getting somewhere Since my sound got back, whenever I reset I get to keep my current time. So maybe my mb battery fixed itself or charged.
I am pretty sure now that is what's causing the problems. If you could disassemble your pda, try playing with the battery. See if it is not loose or something. Try to short-circut it. Get a something form metal and touch both pins. Also try leaving your PDA charging over night.
I hope you fix it since I cant seem to find that kind of battery over the internet.

Radio fault? or Radio ROM fault?

Having strange problems with my Hermes. It has problems maintaining connection to the network, sometimes it will go for days without issue and then won't connect at all. It then takes multiple battery removal/reboots to get it to work again.
It is a Hermes 300, originally from T-Mobile, now unlocked using Vodafone. I am running Schaps_WM6Pro_Hermes_4.31_WWE_Full using radio 1.41
I do occasionally get the NO GSM message on startup but not always and sometimes it works, despite the NO GSM error. I think I solve the problem by trying a new radio rom, but the problem creeps back in after a few days.
Any ideas?

Same issue with mine - I think its hardware related not software. Tried disassembly, reassembly - sometimes works for a stretch then dies. Leave battery out sometimes brings it back for a short time. Question: does your front dPad work - the front directional keys - phone pickup/hangup? Tried reflashing a new ROM but this can get tricky because the rom update will hang if the NO GSM error is encountered upon bootup during the flash - as it can't flash a radio where it think it doesn't exist. This seems to be a bug in the update flash software - it should see if it can find a radio then flash - not try to continue to flash when it can't find one. This fix would probably prevent a bricked phone although if it can't find a GSM radio the phone is probably toast anyway.

Yeah, my dpad works just fine, only faults are with the radio. I have been trying different things that I think work for awhile but then see to not be the case like turning off 3G or HSDPA..... in the end the same fault returns.
Problem is, I don't know when it happens if it's in standby. Miss calls and get no SMS to tell me I have a message.

I started sensing problems when my bluetooth headset was on. While driving I would start hearing beeps indicating a loss of signal. Sure enough I looked on the screen and saw the ! with .... hunting for a signal. Turn the phone off and one and the NO GSM message popped up. Fortunately my housing and screen are in mint condition so I'll search out for a really beat up but working donor and swap the board. Unfortunately on eBay even the really destroyed HERMES are even pretty pricey. If it weren't for the driver problem on the Kaiser I'd spring for one of those being that the Hermes does seem to have its problems. Hate the Fuze as it looks and feels very cheap = not that durable.

Need help with Proximity Sensor Problem

I open a new thread because those already opened are quite dead... the subject is the proximity sensor on the HTC HD2... as i described in oter places this is the behaviour:
Upon receiving calls ALL works as it should
Sometimes when making a call:
1. dial a number
2. press talk
3. take the phone to my ear
4. the screen turns off
5. it starts ringing
6. THE SCREEN GOES ON
7. take the phone from my ear and put it back
8. the screen goes off
9. it answers on the other side
10. THE SCREEN GOES ON
11. take the phone from my ear and put it back
12. the screen goes off and all works well from now on on this call
I have at least a number that EVERYTIME when called does not acts like this... the proximity sensor does its job very well
I have at least one numbet that almost always did the steps described from 1to 12... only 4-5 times it didn't
If i get a busy tone the screen turns on... it will turn of if i do step 7
I've put back original rom and i have the same behaviour. I tried with clean roms and noting installed... still the same...
One time on a clean rom... I called a number that always did that and the first two calls were ok, after that it started again...
Now I'm using Hyper ROM 8.0 and I see that after step 6 if i keep the phone to my ear th screen will turn itself off after a sec or so... i cannot say right now if always...
Considering that this does not happens to many of us and it is not something permanent I think it can have something to do with the network... I don't know exactly what but this is my guess; like in the moments the screen turns on maybe the networks sends out a "signal" like the call would be over... I know it sounds weird but I don't know what else to think...
I even attached a poll to see who gets this behaviour...
So, to all the CHEFS out there... please help.... because HTC is not willing to... they're answer was not helping at all...

This is weird... I use netDrg's 2.5g ROM and I have no issue with the proximity sensor. Sometimes, when receiving a call, if I rotate the phone from portrait to landscape and then immediately take it to my ear, the screen doesn't turn off, but as soon as the display is back to portrait mode, it turns off. This isn't annoying at all, since I rarely pick up the phone and hold it in landscape to talk !
Maybe you should try a different ROM ? If you understand French well, netDrg's ROM is quite good, although it seems to me that the battery drains faster than with the stock ROM...

french is fine.. actually i would learn any language just to have this fixed... i know about landscape and sensor not working... but it is not the case here
it happens so aleatory... i would think it is a hardware issue... BUT i have one number and with it, this NEVER happened
i had almost all the cleanex suite... touch-x, energy and others... i really can't remeber if this happend since the first day i bought it... i've put back the stock rom downloaded from htc and still the same...

ok... i've made like 15-20 calls to the same number and all worked as it should... than all of a sudden it started to do what i've described in first post... just like this... i'm starting to hate this phone...

it looks like i'm not the only one with this issue... how you guys got it solved?..

just a thought... what triggers the screen on on this phone... i know that some apps open the screen... maybe there is a registry tweak to keep the screen off if proximity detected... this should be done automaticly i know... the fact is that the proximity sensor works...

uhm, just to point it out, you should edit your post instead of posting 4 messages in a row in the same thread
Anyway, this is the exact same problem I noticed reported in another thread, and I didn't have it, I mostly receive and rarely call, yet the few times I called I don't seem to remember such problems, will try and remember to test with my other mobile when I get back home.

today i went back to default rom that came with my phone...
RUU_Leo_HTC_WWE_EastEurope_1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
and still it does the same
i HSPL again and than put
RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
the same thing
if I call my home landline it works perfectly... if i call one of the numbers i was telling you about it acts like described in post #1
one other thing i discovered though... with the original roms there is a courtain over the buttons on the phone canvas... this not only blocks aditional buttons on the screen but also blocks the top taskbar... wich is a goos thing
anyway for a 4-500 euros phone this thing i'm having shouldn't happen...
still searching... i've seens something with Rilphone.dll... can this make a difference?
LE: Rilphone.dll broke thephone module... hard reset...

Same here ccezar
I only realised in the last couple of weeks that I've hung up on people a few times & sometimes I've tried making the same call on the spot like 5 times in a row & the line has been cut off before it evens rings, which brings me to say that different behaviours on different calling numbers is just a coincidence.
Sort of experimenting at the moment, I think that when I dial, & put the phone to my ear slowly it works. i can see the screen turn off, & the call goes smoothly. Although after I've hung up sometimes the comm manager or arkswitch is on my screen, which only mean that the taskbar is still active...
I almost thought that the screen may have been switching off but the touch function was still there at least for a few more seconds...
There are hundreds(thousands maybe) of us HD2 owners out there, so my feeling is that if there ain't many complaints, it may aswell be a faulty device.
Then again I wonder if that phone canvs slider would make a diference? Anyone know if there's cab for this?

What radio you using
The more I think about it the more I'm convinced that the 2.10.... radios is the culprit for me.
I just flashed my old 2.07.50.27_2 radio, will test for a day or so and see what happens.
If your on a 2.10.50.. radio urself or anyone with the same prob and radio, can I suggest you downgrade to a 2.07 or 2.08/ or 2.09 for euros?

i thought also that it is radio raleted... i tried other radios and still the same...
anyway i don't think it is hardware related... because i have at least one number that never ever got this behaviour... and neither when calling landlines... it is only on some numbers on mobile networks... and i have numbers that get this behaviour only from time to time...
so... how does the proximity sensor works?... when in a call (there is a reg key that appears upon making a call and says activecallcount=1) the proximity sensor activates... if something in the way it turns the screen off... if the call ends the proximity sensor is deactivated... this is where i dont have exact facts... like if i keep the phone to my ear if it will remain with the screen off or once the call ended the screen goes on... i'd go for the second one...
so... my belief is that is has to do with network parameters... you make the call and on steps 5 and 9 from first post i think the phone belives that the call is over... and i guess the network sends a signal that triggers that... i know it sounds like a fairytale...
now i will try to find a sim card from another mobile operator and see if it does the same... i already tried with another seem from my operator and there is no change... maybe if i try a different sim type (there are simple and 3G sims - i have a simple one)
i'll keep digging... anyway... at least one mobile number and all landlines numbers this NEVER HAPPENED...

well that just makes sense ccezar. I'll do the same over the weekend & see what happens.
with another providers sim card that is.
Hey when say you tried with nothing installed, was cookie's hometab on the rom? just a thought

i don't think so... because i also tried with a stock original rom...
LE: i just realized that my phone is network locked... how can i unlock it?

ccezar2004 said:
i don't think so... because i also tried with a stock original rom...
LE: i just realized that my phone is network locked... how can i unlock it?
Click to expand...
Click to collapse
I couldn't tell ya, I can suggest that if you're on a contract your paying for the phone anyway, so you should be able to ring the phone op & ask them for the codes. Where I am, the only time I couldn't have it unlocked is if it was pre paid & less than 12 months old.

after long debates that's the conclusion of HTC
The only option that is left now is to send the device to the Repair Centre so the engineers could examine it. Your device is still under the warranty. But after the diagnosis the engineers will determine whether the fault of the unit is due to misusage, accidental damage or a manufactured fault. Before proceeding with the repair you’ll be notified with the cost of the repair, if it is an out of warranty case. Kindly note that your phone has a global warranty, which means if you have any issues with the phone and would like to get it examined (repaired) it will be through one of our global repair centers Please follow the link below for information about those repair centers. http://www.htc.com/uk/CA_Hotline.aspx?region=GWS Bear in mind as well that if you have European warranty, you’ll be able to repair your phone in any official repair centre in the European Union. Thank you for using HTC products. Please contact us again if you have any questions. Best Regards, HTC Team
Click to expand...
Click to collapse
bummer

[Q] Cant find any WiFi AP's

Hi all, I normally don't like to post questions because i feel like the answer is somewhere online, and i almost always find it. Apparently this is one of those times i can't. Bear with me as i wanna make sure i dont leave anything out.
My problem is simply that my HD2 will not find any access points when i turn on my wifi. This started happening to me with a previous HD2 i had about a month ago for no aparent reason. I had not changed or flashed anything on my phone around the time the problem happened. I figured i would ignore the problem because i had 3g anyways but then that HD2s touch screen failed so thats why i ended up sending it in for a warranty replacement.
Now i hoped that since i had a new HD2 that the problem would be gone, i mean how could it be possible that the problem would appear on a brand new phone. So i went about doing my usual. Installed 2.08.HSPL, followed by MAGLDR, followed by MIUIAndroid.com rom, same setup i had before the problem began. I made sure the first thing i did was turn on WiFi on first boot of the phone. To my suprise, No access points found. I know it is not my router as i have connected every other device im my house to my router, including other androids and windows phones. I thought maybe its a MAGLDR/Android issue. Flashed back to WinMobile 6.5 and still no acess points. Tried every radio available and still no access points.
Bottom line is im really confused how this can be with a brand new phone. Im pretty sure its a software issue but im out of ideas.
SO please if anyone can help. Please :'-(.

Just found out this morning that it can find my access point, but only if i literally lay it on top of my router. if i go more than maybe a foot away from it then nothing.

It sounds like a hardware issue. I read about these things having issues with a connection to the antennae that can be solved by taking apart the phone and cleaning some leads.

joshnchen said:
It sounds like a hardware issue. I read about these things having issues with a connection to the antennae that can be solved by taking apart the phone and cleaning some leads.
Click to expand...
Click to collapse
Sounds strange that such a new phone would have a hardware issue already. at this point though, im willing to try anything. how/where exactly would i clean/find these leads?

Check this: forum.xda-developers.com/showthread.php?t=834199 and this: forum.xda-developers.com/showthread.php?t=1190180, but be aware that opening your phone might void your waranty. Good luck

is that the only rom you have flashed? and was it nand, or sd etc...??
make sure because it could be a simple error in software as well..
something you can try and report back before opening up the phone

b12rtc said:
Check this: forum.xda-developers.com/showthread.php?t=834199 and this: forum.xda-developers.com/showthread.php?t=1190180, but be aware that opening your phone might void your waranty. Good luck
Click to expand...
Click to collapse
thanks. will take a look at those.
tecle2595 said:
is that the only rom you have flashed? and was it nand, or sd etc...??
make sure because it could be a simple error in software as well..
something you can try and report back before opening up the phone
Click to expand...
Click to collapse
I first got the problem while it was still stock. then i flashed miuiandroid.com's rom with MAGLDR and still. then i went to tytungs ICS Beta4 roms and still. now im back to the miuiandroid rom. so it doesnt seem to be a rom issue.

also all the roms were nand

gotenksnath said:
Just found out this morning that it can find my access point, but only if i literally lay it on top of my router. if i go more than maybe a foot away from it then nothing.
Click to expand...
Click to collapse
Hi my Friend,
your black Wifi Coaxial-Cable inside your HD2 is unpluged and not correct Connected. I had this three times at three different EU-HD2 Devices, too ( the Distance for a working WIFI Signal was 1 Feet. Normal, without Antenna ;-)). Regular the Connector at the PCM at the upper Corner fall of...
If you Still have Warrenty you have to bring this Phone to a Service. If not, you have to fix this little Problem by yourself ( you need 2 Minutes to do that ). Be Carefully when you Bring the whole HD2 inside your Backcover. You have to Tape the Vol-Rocker with a little Sticky-Tape. So this Plastic can´t fall off during the reassembling and is not to Deep to kill the Vol. Buttons...
The Opening is easy. You need only a Guitar-Plectron and t Torx-Screwdriver. Here you find Pictures:
http://mperlitsch.hintergrundbild.com/htc_hd2.htm
Here a Picture from you Sick-Zone:
http://mperlitsch.hintergrundbild.com/htc_hd2/hd2_23.jpg
Where the RED ARROW is, you see One Wifi-Connector and i bet a Sex-Pack good German Beer, this one is your Problem. Put this Connector Back and everything works fine...
Best Regards,
Micha
P.S. Sorry for my poor english !

Perlitschke said:
Hi my Friend,
your black Wifi Coaxial-Cable inside your HD2 is unpluged and not correct Connected. I had this three times at three different EU-HD2 Devices, too ( the Distance for a working WIFI Signal was 1 Feet. Normal, without Antenna ;-)). Regular the Connector at the PCM at the upper Corner fall of...
If you Still have Warrenty you have to bring this Phone to a Service. If not, you have to fix this little Problem by yourself ( you need 2 Minutes to do that ). Be Carefully when you Bring the whole HD2 inside your Backcover. You have to Tape the Vol-Rocker with a little Sticky-Tape. So this Plastic can´t fall off during the reassembling and is not to Deep to kill the Vol. Buttons...
The Opening is easy. You need only a Guitar-Plectron and t Torx-Screwdriver. Here you find Pictures:
http://mperlitsch.hintergrundbild.com/htc_hd2.htm
Here a Picture from you Sick-Zone:
http://mperlitsch.hintergrundbild.com/htc_hd2/hd2_23.jpg
Where the RED ARROW is, you see One Wifi-Connector and i bet a Sex-Pack good German Beer, this one is your Problem. Put this Connector Back and everything works fine...
Best Regards,
Micha
P.S. Sorry for my poor english !
Click to expand...
Click to collapse
Thanks so much to you and everyone who helped me out. Im going to see how much longer my warranty is because the only reason i would really send it back is if the touch screen fails AGAIN (happened twice already) but that wont happen for at least a year. So if warranty is gonna expire before then ill fix myself. again thank you to everyone.