P800W&O2 orbit use USPL have supercid?
xvirus said:
P800W&O2 orbit use USPL have supercid?
Click to expand...
Click to collapse
Yes.You are right...!
But I don't know why you don't read in forum ? Pof writed it,and all method.
Hi,
I want to install Duttys 2.8 rom so for which i Shifted back to
Stock ROM RUU_BlackStone_HTC_WWE_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe
after which i i installed stock SPL 115
after this when i try and install RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
its gives me the invalid vender ID error.. PLS help i have been at this for hours
Sorry, i don't know - try searching?
Use USPL. Instructions on sticky in Blackstone ROM Development. Do not use Hard SPL. You will have green screen probs.
sanjoy316 said:
Hi,
I want to install Duttys 2.8 rom so for which i Shifted back to
Stock ROM RUU_BlackStone_HTC_WWE_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe
after which i i installed stock SPL 115
after this when i try and install RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
its gives me the invalid vender ID error.. PLS help i have been at this for hours
Click to expand...
Click to collapse
If you haven't figured this out yet read the guide in my signature.
upgrades are for specific carriers so yours dont match.. i did mi;ne via uspl
cRaCKwHoRe said:
If you haven't figured this out yet read the guide in my signature.
Click to expand...
Click to collapse
worked like a charm mate.. thanks a million.. Just one more query though does Davideuck s 6.5 ROM also need the the 1.56 ROM
sanjoy316 said:
worked like a charm mate.. thanks a million.. Just one more query though does Davideuck s 6.5 ROM also need the the 1.56 ROM
Click to expand...
Click to collapse
Sorry but I am not sure what the SPL requirement is on those WM 6.5 roms. I have never looked into them. I am not interested in a beta operating system at the moment on my production phone
You may want to pose this question on that particular thread.
sanjoy316 said:
worked like a charm mate.. thanks a million.. Just one more query though does Davideuck s 6.5 ROM also need the the 1.56 ROM
Click to expand...
Click to collapse
Rom Dependent. I am using miri v8.1 wm6.5 for spl 1.54. 2 versions for spl 1.4 and 1.54. Read posts before installing.
Hi You all,
Can someone help me out? I have installed an custom rom, like Energy of Artemis 8.0. When installing a programme to run on the HD and have to do a soft reset my HD freezes and have to install the custom rom again, otherwise he wil not work at all. It won't go into the bootloader?
Thank you for your help,
Arno
It sounds like you flashed an incompatible radio, perhaps ask you querys in the thread of whoevers ROM you flashed.
Regards
Flashmore
Flashmore said:
It sounds like you flashed an incompatible radio, perhaps ask you querys in the thread of whoevers ROM you flashed.
Regards
Flashmore
Click to expand...
Click to collapse
Hi Flashmore,
With both ROM's i had flashed radio 2.07.51.22.2 and also tried with radio 2.09.51.03 but gave me the same result?
Thanks mate,
Arno
SiriusHD2 said:
Hi Flashmore,
With both ROM's i had flashed radio 2.07.51.22.2 and also tried with radio 2.09.51.03 but gave me the same result?
Thanks mate,
Arno
Click to expand...
Click to collapse
That's because radios with 51 in the naming convention don't support the 576m hack and at least for the NRG rom I know these radios won't work. You need to use either 2.08.50 or 2.07.50 for that rom (can't speak for the Artemis rom).
ClydeB1 said:
That's because radios with 51 in the naming convention don't support the 576m hack and at least for the NRG rom I know these radios won't work. You need to use either 2.08.50 or 2.07.50 for that rom (can't speak for the Artemis rom).
Click to expand...
Click to collapse
Wow you are in swift action thanks for that! Where do I find the wright radio for the Energy ROM?
Regards,
Arno
SiriusHD2 said:
Wow you are in swift action thanks for that! Where do I find the wright radio for the Energy ROM?
Regards,
Arno
Click to expand...
Click to collapse
i think not depend from radio
if the radio is wrong,your device don't boot
try Mtty or task29 solution
for cleaner well memory device
and after flash rom execute hard reset
SiriusHD2 said:
Wow you are in swift action thanks for that! Where do I find the wright radio for the Energy ROM?
Regards,
Arno
Click to expand...
Click to collapse
Here - http://forum.xda-developers.com/showthread.php?t=611787 - use either the 2.08.50 or 2.07.50 radio.
alesscam said:
i think not depend from radio
if the radio is wrong,your device don't boot
try Mtty or task29 solution
for cleaner well memory device
and after flash rom execute hard reset
Click to expand...
Click to collapse
Believe me it is the radio. Read the NRG thread and there are at least 57,365 people with the same problem. Ok, I may be exaggerating just a little but it seems like that many. The device does boot but gets stuck at the white HTC screen.
ClydeB1 said:
Believe me it is the radio. Read the NRG thread and there are at least 57,365 people with the same problem. Ok, I may be exaggerating just a little but it seems like that many. The device does boot but gets stuck at the white HTC screen.
Click to expand...
Click to collapse
ok mate
if you say I to it I believe
it's a strange
I have always since that device not boot when used wrong radio
just to throw in a little agreement with clydeb, on non tmous phones,if the radio is incorrect the phone starts, but hangs on the grey screen until you boot to bootloader and correct the radio.
i'm using Artemis 8.0...radio is 2.08 no problem at all...
samsamuel said:
just to throw in a little agreement with clydeb, on non tmous phones,if the radio is incorrect the phone starts, but hangs on the grey screen until you boot to bootloader and correct the radio.
Click to expand...
Click to collapse
i Agree with that....sir Clydeb help me alot...
BladeKnight said:
i'm using Artemis 8.0...radio is 2.08 no problem at all...
Click to expand...
Click to collapse
Hi All,
Happy Easter to you all! I have installed the 208.50 radio and everything is working again Now my HD2 is running on Artemis 7.0 and tomorrow i wil try the Energy 1ste of april version to see how that Rom will be running. But so far it helpt me a lot and thnx everyone for all the great possibilitys you have given me solve this problem........
Regards,
Arno (SiriusHD2)
My dad wants me to install WP7 on his tmo us HD2. How do i go about doing that? i also need to know how to downgrade to spl 1.42, im at 1.10 or something now. Please help
thx brah
roguly said:
My dad wants me to install WP7 on his tmo us HD2. How do i go about doing that? i also need to know how to downgrade to spl 1.42, im at 1.10 or something now. Please help
thx brah
Click to expand...
Click to collapse
Use and install HSPL3
kurt-willems said:
Use and install HSPL3
Click to expand...
Click to collapse
yeah but i thought i had to be on spl 1.42 to use hcpl3, and i dont know hwo ti get that radio
Just go there: http://forum.xda-developers.com/forumdisplay.php?f=977
If needed read the posts regarding MAGLDR
If needed read the posts regarding HSPL (may find it the WM6.5 dpvt for HD2)
There's lot of guide and video tuto
Have a good reading...
I want to remove Olipro 3.20 from my HTC P3600i
How can i do??
(Sorry for my bad english)
gotji said:
I want to remove Olipro 3.20 from my HTC P3600i
How can i do??
(Sorry for my bad english)
Click to expand...
Click to collapse
you need downgrade to Olipro's Hard-SPL 1.20 or Olipro's Hard-SPL 1.30
Olipro 1.2
But i try to run SSPL it show black screen
it not show tri-screen.
How can i fix it ???
gotji said:
Olipro 1.2
But i try to run SSPL it show black screen
it not show tri-screen.
How can i fix it ???
Click to expand...
Click to collapse
to fix it, you can look post at http://forum.xda-developers.com/showpost.php?p=4353623&postcount=1
This link was expire. Do you have any link??
gotji said:
This link was expire. Do you have any link??
Click to expand...
Click to collapse
I am very sad... for not knowing the other links (mirrors), we suggest you try making your own NBH file to recover stuck HardSPL 1.20 by following the instructions given
Thx. I will try it