Hello,
I have bought myself a diamond touch 2, and i directly flashed it to Dutty's R6 rom because i like it much better and i made up my mind about it even before i bought it.
Now i seem to have a problem, and i don't know what would be the problem; either the device or the rom?
Proximity doesn't work; setting automatic backlight dimms the screen to a low-light level. Holding a flashlight above it doesn't make any difference.
Also, when making a call, the display keeps being illuminated the whole time, no matter if i hold it to my ear or not.
Does someone recognize this problem?
Cheerz
Exca said:
Hello,
I have bought myself a diamond touch 2, and i directly flashed it to Dutty's R6 rom because i like it much better and i made up my mind about it even before i bought it.
Now i seem to have a problem, and i don't know what would be the problem; either the device or the rom?
Proximity doesn't work; setting automatic backlight dimms the screen to a low-light level. Holding a flashlight above it doesn't make any difference.
Also, when making a call, the display keeps being illuminated the whole time, no matter if i hold it to my ear or not.
Does someone recognize this problem?
Cheerz
Click to expand...
Click to collapse
Settings\System\Power\Backlight\ Turn off Auto adjust.
If i turn off auto adjust i can indeed set full brightness, but that's not the point. I want the auto-dimming and proximity sensor to work, so when i hold the piece next to my ear it locks and turns off the screen...
If I turn on auto-adjust, it doesn't respond on any lightchange or action; it just dimms the screen to about 40% and keeps it there.. either a bug or a hardware fault with my unit?
Not sure that it ever worked perfect out of the box.
Have you tried tweaking the settings with TD2 Tools?
How do you mean tools? As far as i know i can only find one box to turn auto adjust on.. you have the same configuration, does it work for you?
EDIT: I installed the app "LumosWizard". Now the phone's backlight adjusts depending on the light the sensor receives. The sensor works well as the values go up when putting a flashlight on it.
However, i wonder why this doesn't work with just auto-adjust on, that's what the HTC Auto-Backlight should do right? Also, with this app, the backlight doesn't go out when no light is reveived (auto-lock when putting into pants, or turned off backlight when calling...) ?
This is what i'm looking for: http://www.youtube.com/watch?v=6xakUmz1zwc
=> i don't think this is achieved by an additional application, but is just standard HTC service doing this because of putting on the auto-adjust...
There is NO proximity sensor on Touch DIAMOND II. Only light sensor. Use Touch_InCall_Screen_Tweak instead. This program use G-sensor and block the screen when your phone is in vertical position.
m72m72 said:
There is NO proximity sensor on Touch DIAMOND II. Only light sensor. Use Touch_InCall_Screen_Tweak instead. This program use G-sensor and block the screen when your phone is in vertical position.
Click to expand...
Click to collapse
Thanks, installed and works good!
Still wondering though why i need a 3rd app like LumosWizard to make the lightsensor work, as htc's autoadjust apparently doesn't
I did find this .cab called Glight and it works great on my TD2
More about it here:
http://www.ageye.de/index.php?s=glight/about
Related
Another body here notice that when you check the box to turn on backlight sensor of the keyboard, actually it disable the function. However, when you uncheck the box saying turn on backlight sensor of the keyboard, this function works whenever you touch a key in a dark area.
Just want to know whether there is something wrong with my machine or a bug in WM5, or mechanical problem when the machine was manufacture.
My backlight's always on with the checkbox...
Otherwise the light sensor kicks in to detect background light levels I think.
V
Thank you for your reply. My problem has been solved.
Hi Guys,
I have been playing with a Hermes for a day now in order to decide on using it or the Wizard. I am aware of the alignment and stylus grip issue, but is the keyboard backlight sensor iffy?
Until I turned off the sensor, I found that the keyboard backlight wouldn't always turn on at all, even with the phone in a completely dark room.
Apart from that, seems a nice phone (other historic issues nothwithstanding) and certainly faster and easier to use than the Wizard.
For info, my serial number starts HT640, which is much later than the others on the wiki (I have added it to the list) so maybe it's 'new an improved'?? We can but hope.
even in a dark room and you pull the keyboard out you still need to press a key on the keyboard before the backlight comes on...
johnk1973 said:
even in a dark room and you pull the keyboard out you still need to press a key on the keyboard before the backlight comes on...
Click to expand...
Click to collapse
Yep, I know that - it doesn't work.
lighting issues
I've taken to holding my thumb completely over the sensor for a second or 2 and beginning to type, this usually activates it when it will not automatically light the pad (even in virtual darkness). Mine does seem a but sporadic, sometimes it works automatically, other times not.
Why not just disable the light sensor?
Settings > Personal > Buttons > Backlight
V
vijay555;1036692 said:
Why not just disable the light sensor?
Settings > Personal > Buttons > Backlight
V
Click to expand...
Click to collapse
umm..if you have to disable features, doesn't that defeat the purpose of having them?
I don't really consider the light sensor a feature, more an option. I think the blue backlight is cool, so like to keep it on all the time when I'm using the keyboard, daylight or no.
However, for the purposes of this thread, removing the potentially buggy sensor from the equation will help narrow down any problems, is it the lights, the phone, or the sensor that causes erratic behaviour.
Works fine for me though.
V
it is possible ?
I'm using the KAISER, when in a building i set the brightness to low becuase it has a very bright screen and it's just a waste of battery
But when i go outside i can't see a thing, need to set it to high again
And then i just forget to set it to low again
is it possible to make it be automatic ?
(bright outside - high brightness, dark outside - low brightness)
Thanks !
p.s.
does the KAISER have a light sensor like the Universal's keyboard light sensor ?
if so, is it possible to use that ?
ah man i hear you. when my sister got her blackberry pearl, and i saw it automatically change brightness, i was jealous. aha. unfortunately, the sensor is hardware thing.
i'm not sure about the kaiser but i know the hermes has a keyboard light sensor, but it's on the keyboard, and only says whether to turn on the keyboard backlight or not. not too useful, i'd think.
Hermes and Kaiser have front cameras...
but camera is a no-no for battery
Even once a minute, or on power-on?
Well, maybe yes.
I nice Solution would be a Button you press it, and the Brightness gets configurated automaticly: perfect for battery because you do this only on need!
And there could be a standart brightness reseted after having standby on
I dont know how to use the Camera in VB.Net someone knows?
I was thinking more in the direction of the front camera and the timer ....but bettery above all .... if it is possible it would be awsome !
the buton pressing idea is (forgive me) pointless ... if i wanted to press a button i might as well press the on screen button i already have ! (spb mobile shell)
thanks for the idea though !
it's great to see so many people taking interest, hope it will stick !
SPB software is my solution. You can map your jog dialer for brightness. I use that for volume, so I use touch screen to slide my brightness.
http://www.spbsoftwarehouse.com/products/pocketplus/?en
look at the screenshot or demo. Map the brightness as botton4 is a option because brightness is a program link for you to set what ever button as you wish.
blah, i have an at&t 8525, so i forgot about the front facing camera. my current solution is to set the backlight to reasonable indoor setting, and i have VJLumos mapped to my Button5 press&hold. so whenever i go outside, I run VJLumos, and when I get back inside, I run VJLumos again (which turns it off) and it automatically goes back to the previous backlight setting.
It's really annoying when you're in someplace and just after you press the record button and suddenly the screen turns full blast bright! People around starts to turn their heads in your direction... Does your ipaq 612/614 pda's spits unwanted light rays in your face as well?
Do you know how to disable this, perhaps a registry tweak we can do?
Thank you so much
i believe my backlight fix (reg fix) will fix that, check the post in the backlight controller thread
thanx keyx,
you never fail to be helpful
Hi keyx,
I think you should try pressing the record button using the memo program.
I'm sure it still turns bright even after you follow the instructions here:
http://forum.xda-developers.com/showpost.php?p=4527543&postcount=94
Which line specifically prevents the screen to bright?
TIA
sabertooth said:
Hi keyx,
I think you should try pressing the record button using the memo program.
I'm sure it still turns bright even after you follow the instructions here:
http://forum.xda-developers.com/showpost.php?p=4527543&postcount=94
Which line specifically prevents the screen to bright?
TIA
Click to expand...
Click to collapse
i think the note app is designed to force backlight on while recording (like gps app that keep backlight on)...you may want to look for other app that does not do that or try disable backlight globally...
if you use my rom you can use the voice commander button on the side of the unit to turn screen off, it should keep the app going
I've tried other recording programs, also still forces the backlight to turn on to high gear.
I'm currently using backlight controller to turn it off while recording, but sometimes you just need to leave the screen on.
There is a Hardware bug in the iPaq 600 phones.
This bug causes "static" to be heard in all recordings if the screen goes dim.
HP was aware of it and so sent out a "fix" except they did not fix anything all they did was force full screen brighness for the duration of the recording so that you never encounter the bug.
If you disable the screen brightness via a reg key chances are you will here the static in your recordings.
Btw i have not tested keyx's reg fix
little more info here
http://forum.xda-developers.com/showthread.php?t=481905
thanks branded,
I'd rather have it bright than clicking noise
I there any settings or something to adjust proximity sensor? I was trying to turn off screen covering sensor with thumb, but.. no effect.
Does it need any setting or my phone is faulty?
I noticed the same thing on my phone today.
The proximity sensor doesn't work if you've switched off the Automatically adjust backlight option in Settings>Sound & Display>Backlight. There doesn't seem to be any way around this as the proximity sensor doesn't have its own option.
Are you in a call? You need to be calling/receiving a call for it to work.
I agree, I think you need to be in a call for the proximity sensor to work properly.
For me it works fine. And i don´t hade automatic backlight on.
aldabal said:
For me it works fine. And i don´t hade automatic backlight on.
Click to expand...
Click to collapse
That's interesting because I can toggle my proximity sensor (whilst in a call) by toggling the automatic backlight. That option must be linked to something else as well.
Screen goes black
I do have the same behavior, when I make a call the phone's screen goes black automatically so if I need to press any key have to press send to get my screen back, then use the keypad, nonsense, is anyone having the same issue ?
for me, the proximity sensor doesn't work at all. I have the automatic backlight setting and yet it still doesn't work. any idea why?
SP300
I just found the solution, I have got the screen protector on "The Original HTC SP300" and is causing the screen to go blank when you do a phone call, If a remove it a little bit from the top left corner and make a call works as spec.