When I was listening to music and reading an E-Book, my Leo stopped/changed song in a strange pattern and called the last number by itself.
After multiple soft-reset, it was still happening. I uninstalled some applications I installed of late: Skyfire, Touch X 3G button, and did a soft-reset then it worked properly.
But I'm not sure when this horror will happen again. Is there anybody experiences this issue?
Lol, I had this "problem", when I first used my 3,5mm cassette adapter in my car attached to the HD2.
The 3,5mm jack was somehow "dirty", using the 3rd microphone wiring, which also is used for music-control, and picking up and dialing the last number
I've cleaned it with some alcohol, and have not have this problem since then.
Thanks a lot for your input.
I'll try to clean my 3.5mm jack.
Same thing happened to me after connecting headphones to the 3.5mm jack.
Related
Hi,
I've noticed an audio output distortion of some frequencies when listening to music, in the sound coming out of the 2.5mm jack.
When the speakers on the device is used, there is no problem.
When I plug the headphone, there is sound output, I hear the music, but some frequencies are lowered so much that I can't hear the singers voice. When I unplug, the speakers work fine and I can hear the singer again.
In additon that, most of the background instruments can be heard as well as the backvocals, if they are female.
It's like the sound is being processed (like an equalizer) when I plug the headphone, some frequencies are lowered, given some echo, reverb etc.
I don't understand how this is possible. I am thinking of a hardware contact problem, but it's hard to believe if this is a hw problem.
I've tried two firmwares (2.16.x, 2.25.11.1) and made hard reset also. No result.
Any ideas?
Note: I can try to actually record the sound tonight if anyone wants to hear.
Best regards,
Fast
maybe try a different headset first?....could be a short in the cable, because what you are describing is a phasing issue with the headset speakers......
Thanks for the response Kiru,
Just tried a different headset plugging it into my HAMA 2.5 --> 3.5 adapter. same result.
I will try the original headphone came with the Wizard. If the source of the problem is the HAMA adaptor, this should resolve it. (i hope it is)
Could you please elaborate on the "phasing issue" ?
fastguy said:
Could you please elaborate on the "phasing issue" ?
Click to expand...
Click to collapse
Hmm....how can I explain.....Let's start with the speaker itself. A speaker has two terminals on it, one postive and one negative. What we want is to have the positve from the source (ie. Amplifier) to the positive terminal of the speaker, and the same for the negative. Since there is a pair of speakers, we want them to be hooked-up correctly. If hook-up correctly then the speakers are in phase with each other, and this is called constructive interference, hence in phase. When ONLY ONE of the speakers is hooked-up backwards, we call this destructive interference, hence being out of phase. Being out of phase causes frequencies to cancel or sound muffled. Hope you kind of get what I mean, but I highly doubt that this is the problem with headphones because heaphones nowadays rarely get manufactured with this problem. This is just the electrical part of phasing. Also, you can have one speaker, and it could sound out of phase because of the distance it is firing from walls or the shape of the room due to the reflections of sound, this is called acustical phasing.
A short in the cable, meaning the positve and negative wire are somewhat touching, can cause a similar effect, and I suspect that this is problem for you. As you now state that you are using an 2.5 to 3.5 adaptor, I would agree with you that most likey you have a faulty adaptor.
Hope this helps! and keep me posted!
Hi again,
Thanks again for the explanation Kiru, I know a bit of electronics so I got the problem.
However, I'm now home and tried to original headset, no result. The same problem is existing.
This makes me believe that I've broken something inside the Wizard which shortcircuits something. I'm very dissapointed.
Maybe the only way is now to buy a stereo bluetooth headset...
Thanks for your help
Any reason that you can't return to orange for repair/replacement?
PROBLEM SOLVED
I got this unit from priceminister second hand. It's origin is not France, I don't have a purchase receipt neither.
By the way, I solved the problem. I disassambled the unit using the info given in one of the posts in the forum. I played a little with the contacts, there was oxidation in the outer solders, i cleared them up etc, it 's working at the moment.
I'll post some pictures afterwards.
and I hope i will be able to reassamble it, I already have a piece of thing which I don't know where to put
I got the same problem. Was working fine for 2 months then all of a sudden the headphone plug is all messed up. Volume is all distorted I can sometimes hear a song but quality is no where near the original. Usually everything sounds echoed. I think something is wrong with the plug
I've had the same problem. The headphone jack on the Wizard is crap. If you have your Wizard in your pocket with an adapter, as you move, the adapter pries back and forth on the jack. This breaks the cheap jack.
If you want to listen to your Wizard as an music player, you should invest in a nice set of bluetooth headphones and only plug the jack in when the wizard won't be moved around a lot, like a home or car stereo.
I recommend Nextlink Spider headphones. They double as a headset and you can navigate through your library with the button on them.
MUSIC Speed
I got the same problem here. The SE stereo btooth headset isnt yet in our place.
Anyway, i experienced this one with ROM2.16 Imate. The sound speed or music speed seems to being played faster than normal. But when i tried to plug the 2.3-3.5 adopter and quickly pull it out, the sound is played in normal speed then. strange.....
are you all sure that the wizard has a stereo output ? I thought it was mono.
Anyway you can get earpieces and headphones with a 2.5mm jack so you don't need a 2.5-3.5mm adapter.
Maybe the contacts on your jack are not connecting properly with the internal contacts of your adaptor
hi, i got an imate jamin and i need to replace the audio jack were the handsfree pug in, do anyone know where i can find to buy this part please or if anyone had the same problem how did you solve it.
thanks guys!!
Dodgy Audio jack
My audio jack plug works fine BUT when I unplug the headset, the phone stays in headset mode i.e. no sound from the speakers. If I plug/unplug the headset a load of times it eventually goes back to normal.
Any ideas. My solution is never to use the audio jack!
Audio Jack
I've had two M600's which have done exactly the same thing, both replaced by Orange, I've now upgraded to an M700 and unlocked the old M600 with a PAYG sim and guess what that one has now lost speaker sound so that three with the same fault and this M600 has never had a headset plugged in.
Has anyone else had similar problems?
i had the same problem othillo before it broke so be carefull cause your is about to brake too, i mailed imate and they said the only way to fix it is to send it to them in dubai.. not relally keen to send it there .. but till today i havent find ther part any where it seems that imate dont send out parts ... as soon as i find an alternative i will post it here..
Is this problem caused by the connector itself or is it something else? If it is the connector I can buy a new one at the local hardware store and modify it a little bit to make it fit in my S200, probably going to replace it with an 3,5mm jack if that is possible...
it is caused by the connector in fact htc the original makers of the prophet on there new models they changed it to a usb connector for the handsfree i changed my connector many times with regulas 2.5mm connector but the sound doesnt work properly. what it does it comes out with out bass then when you push the talk button on the handsfree sound comes out good. another thing i noticed is if when you insert the jack plug in the connector and you pull it out a little bit the sound comes better and the talk button works, i know for fact cause i tried it that its not from the handsfee cause i tried it on another device and work properly. the actuall connector for them is different from what you find to buy even if you plug in normal 2.5mm headphone sound doesnt come out right . if you manage to make it work and modify the connector please post it here so who got the same prob like me can have an idea how to fix it... thanks
Audio Jack
Here is what the problem is:
Audio jacks have what is called a normally closed contact. Each contact point actually has 2 parts. In the closed (no headset) the 2 part of the contact point make contact (shorts). This enables the signal to pass through the jack to the phone speaker. When you insert a headset, the 2 points open (break contact) and signal only goes to the headset.
I'm talking from experience as a sound engineer for over 30 years and this is usually the problem 99% of the time when it comes to these type of jacks. One of the contacts (usually the ground when no sound or mic at all) breaks or can no longer "spring" back. I haven't opened mine yet but fully expect this to be the problem.
audio jack
hi jsapper, i got what you saying and your absolutly right .. the thing i replaced mine 2 times now been done by a technician who fixes phones/pdas the thing with the connectors i replaced the device doesnt work properly sound comes out with out the bass and the talk button doesnt work .. i guess that the original part got some extra connectors or most probably the pins are switched around..
do you know if there is any special connectors for them...
I have a similar pb with my S200:
After running tomtom during 2000km installed on my motorbike w/ a 2.5mm headset, sound seems to no work anymore (neither back or ear speaker), I suppose that vibrations against jack connector are responsible.
With a bluetooth or wired headset sound works.
I have soft/hard reset, upgrade to last WM5 rom, upgrade to WM6 rom, I have tried to get in/out a 2.5mm jack connector without any result.
The ring facility is working (w/ or w/o 2.5mm jack connected), so I can say that the back speaker is working.
I am looking for a solution too...
nb: I have my back speaker + screen replaced one time after 2months.
Dean.
Have you try resolder the Connector?
it was to damaged to be resolded
Hi everybody,
I aswell have this kind of problem from time to time.My solution is quite simple.You have to use the original 2,5" jack with the 3 black "dividings".(sorry for my english) This solution reduced the problem dramatically.If the problem starts now, just plug it in and out a few times and it should work again.
Cheers
Phone Jack is a mechanical mess ...
Same prob, used the headset, rear speaker dead. I opened the prophet, unsoldered the jack and found it misconstructed.
The body of the jack is plastic and not capable to withstand the forces of a plugged in headset.
There are two integrated switches - which - when headset is unplugged are closed and deliver the signal to the speaker. one of the switches does not close anymore when the headset is unplugged. My first solution was to unsolder the jack and bridge the contacts 2 and 4 as welll as 3 and 5.
The rear speaker functions now and I can use the phone.
Next step will be to find a jack solution on the market to finally solve the problem. I will keep you informed!
thanks buzzi will be looking in here... for your post!
i had the same problem with my audio jack and i searched many forums for a solution. the only thing i can say: if you really want to use it and you want go back in normal mode after unplugging, take a little needle. if you look at the audio jack (USB is left to it) you have to stick the needle in the right side of the jack somewhere an search for a little contact (the first time hard to find, the second time easy) and try to push it a bit to the left. so the prophet goes back in normal mode. it sucks but i didnt find another solution...except for buying a bluetooth headset and use software to hear music over that (for mono headsets u can use a programm calles BTAudioToggel, but make sure u use the Toggle software, because there is another one called BTAudio, it sucks because it costs money and doesn't work for me so well)
Greetz
Friends,
My prophet has exactly the same symptoms. However, I opened up the phone and carefully examined the jack. It is crap, sure, but at least on my phone it is not at fault. I tested with a continuity meter and the contact mechanism was working perfectly. Those who tried this measure without success read the following thread:
http://forum.xda-developers.com/showthread.php?t=281331
In my case it is definitely a problem with the speaker, and it seems to be eqaully common. It seems that there is more than one problem dogging the speaker of ths model.
mine's got the small contact switch problem.
it started last night! SO Annoying. Plugging a friend's original 2.5mm adapter in and out solved it temporarily. Then it went again! I have only got a 3rd party 2.5mm plug, and it took me ages to trip the small switch back with that. I have now got a BT headset on order.
Can't wait for the newer design HTC headphone adapter as I have had this problem with 5 different devices! (Tanager, Typhoon, Hurricane, Tornado and now Prophet.)
would agree with hybrid the needle trick fixed it ran media player so i could tell when it was working again. it was mentioned before that using the 2.5mm adaptor with ibky 2 rings as opposed to 3 causes this problem. I can identify with this as i have been using my dopod h/free with no problems for months i use the adaptor to plug in my headphones one time and get a eap of issues!
i will adapt a h/free to plug in some nicer headphones!
Can i use the USB connection as a handsfree port on my prophet?
Cheers
Hi, Prophet's USB is not a USB hub and thus not usable for connecting external devices - only way is bluetooth ...
thanks buzzi
Hey all, I know a lot of people have had problems with the jack doing goofy things, however my problem is a little different. I'm having an issue where i'll be listening to music just fine on my headphones, unplug them, a bit later plug them back in and it no longer plays though the headphones. It will play though the external speaker just fine, but when you plug it in, you head music for about 400ms then it goes silent. Upon rebooting the phone the audio will work again. Sounds almost like a software glitch but not sure how to fix it. The HTC support rep suggested a "hard reset" I really don't want to do that, but it may come to it for testing purposes.
Anyone else run into this problem? I would really like to fix it without wiping the phone.
No headphone problems here my friend. Good luck.
Just a heads up. The evo can sense a mic'd headset inserted or a standard 3.5mm headphone or aux cable. When it senses a standard cable it will run off the headphones and let you do commands or talk trough the built in mic. I had a "headphone" issue that many talk of with diffent things poping up or music not playing. All i had to do was push until I heard a locking click with the headset and with the standard headphones I have. Everything has worked great since then
http://androidforums.com/htc-evo-4g/98880-fixed-microphone-jack-problem.html
This just might work for you
Hi guys, i have an hd2 with nand android, and i have a problem when i plug in the aux cable or earphones: the phone during the play of a track sometimes changes automatically the song or it restart the song a lot of time without that i touch the phone. I already had the plug in problem too when i had wm 6.5 on the phone, but the problem were not the "music shuffling", but the problem were that the phone autodialed the last number called by me.
Someone has the same issue? Any solutions?
I've had audio jack problems as well.
I use a mp3 player from the Android Market called Tiny Player.
Occasionally while playing songs in Tiny Player through headphones or an FM transmitter, the Android music player will start up and begin playing a random song while Tiny Player is still playing.
It must be something about the way that the audio jack is designed to work with the HTC headphones that have the in-line mic built into them for calling. Some regular headphones must be causing a connection to be made which makes the phone think that a button on the HTC headphones has been pressed.
I can usually solve this problem by unplugging and re-plugging the headphones, or turning the plugh in the jack a little bit.
this has come up fairly often over the yrs, to a greater or lesser extent. I have a pair of senheissers which do exactly what you describe, but only on winmo roms. My other phones (tested four or five pairs, cheap and expensive) all work fine. the senheissers work fine on wp7 and android.
Odly enough two (that i can think of) other threads like this also mentioned senheisers, , , what you using, OP?
@samsamuel: i'm using android MIUI.
@huggs: sometimes i do like you, i unplug and replug the cable to solve the problem, but i want to permanently solve this problem, even at the cost of replacing the input jack, you say that it solves?
Its also worth removing the battery and then looking into the jack to see it there is any debris in there, remove with a pin
Same problem, except my Android powered HD2 also likes to randomly dial the last person I talked to when I have the headphones connected. These are the original HTC phones that came with the device. Today it managed to leave my boss eight voicemails. Nice. Fortunately, my boss has a sense of humor and it'll probably be OK. What can I do to prevent this from happening again?
I have a problem with 3.5 mm jack. When I turn on the headset, the phone restarts. And the problem is not with all handsets
I think I found a fix for misbehaving headphones:
http://www.appbrain.com/app/headset-blocker/com.idunnolol.headsetblocker
If anyone has used this please comment.
@imrazor : Thank you very much, I'm using it for two days and since I installed it I've had no problems.
Hello.
I'm using HD2 about 1.5 year and I have one problem I can't fix. When I'm hearing music on headphones and I'll touch headphones cable songs just change, phone rings to last called number and all that staff from remote controller on standard headphones. It's pretty annoying because i have to hold my phone in hand. When i put it in my pocket while I'm moving then phone moves -> cable moves -> songs change. I'm NOT using standard HTC headphones, I've tried a lot sets of headphones and it happens on every one. I think that something may be wrong with the headphones jack, but i can't send it to HTC because i changed the screen on my own when I got it broken.
So here comes my question. Is there any possibility to switch off the options of remote controller from standard headphones (next song, prev. song etc)? I am using Sennheisser headphones without controller.
Common problem on non standard headphones. Issue is due to rings on plug nut aligning as should & sending false signals.
seems mainly down to headset plug but device socket wear could have some effect on this.
Never had this problem as I use original headset lead modded with a 3.5mm female headset jack.
What OS are you on ? this may help you get better specific answers on software fixes & advice.
I'm using Energy ROM and DL init (?) Android - can't exactly remember the build's name. Sometimes it happens more often than other times. I think it's happening most on WM.
I was hoping that there is some kind of fix which switches the controller off, prevents from using those rings which you mentioned that are responsible for controller.