Alright so I recently recovered my Hermes from a brick while trying to update its Hard-SPL via USB on Vista, but now it won't be recognized in the USB ports on my Vista PC
I tried it on another Vista and an XP pc and it didn't work either
Related
I have now my X2, generic_SG. It gets into bootloader moder easy but then it is not recognized my the pc or SEUS.
When I got it, and during drivers where installed upon connection the usb, it was recognized. But now, no more. So I cannot use the SEUS service even though its in bootloader mode!
I only read about people not able to get into bootloader mode, but in my case, very strange. Any help?
I had the same problem.I just change the usb cable and put in directly to pc and now is everthing ok.
What do you mean 'direct in pc'? One had to plug it always in the pc !?!
And I am using the SE provided cable. Perhaps I will try a different one but I don't think its the cable as it work fine sync'in with pc. Just in bootloader mode its a no go.
Tried today with another computer. Both have Win7 Ultimate.
Also tried 'another' cable / cables but same issue remains!
Hi all
I have a problem. I can't connect my legend to my pc anymore.
What happened:
I downgraded>rooted>Flashed custom rom>Flashed differed custom rom
then my legend didn't recognize the SD card anymore(but this is solved).
Now the problem is, is that when I connect it to the pc, the legend do's what is supposed to do(ask what kind of connection you want) then the pc go's *badum*(usb sound) and fails to recognize the legend(AKA cant find the right drivers to communicate with the legend)
I have tried and tried and tried:
restart pc
restart legend(its has a stock rom now (failed re-flash attempt))
installed latest HTC sync
uninstalled usb drivers
differed usb ports
The phone itself works properly. But a connection with the pc cant be made.
The Fastboot usb connection WORKS
The Recovery usb connection Does NOT work
When booting phone wile connected to the pc the pc makes 3x a usb connected/disconnected sound
Thanks in advance!
There a guide in rom development section on how to unbrick your usb.
Sent from my Legend using XDA App
http://forum.xda-developers.com/showthread.php?t=751265
*Faceplam* Thanks for pointing that out
Thread Closed
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
donlloreda said:
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
Click to expand...
Click to collapse
Either your USB port got replaced badly, or you don't have the drivers: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/USB_Drivers_bit_4.7.1.zip
Try a different cable, diferent port, different computer...
Hi .
does anyone know other drivers i can use for the i9505 device?
The drivers installed from keis do not work under Recovery mode from TWRP .
When i connect my device to my windows 8 machine, on device manager it complains that it cannot find the drivers for the phone yet when the device is booted into a working rom of any kind, it detects it?
Thanks in advance
Google, Samsung usb drivers.
usb drivers
jonneymendoza said:
Hi .
does anyone know other drivers i can use for the i9505 device?
The drivers installed from keis do not work under Recovery mode from TWRP .
When i connect my device to my windows 8 machine, on device manager it complains that it cannot find the drivers for the phone yet when the device is booted into a working rom of any kind, it detects it?
Thanks in advance
Click to expand...
Click to collapse
Ok here you go, the official Samsung usb drivers for your phone: http://www50.zippyshare.com/d/74240052/114177/Samsung_USB-Driver_for_Mobile_Phones-1.5.27.0.exe (direct download link)
Install it and reboot the computer, then plug usb cable in and wait til windows recognizes .your phone.
Good luck!
Misterjunky said:
Ok here you go, the official Samsung usb drivers for your phone: http://www50.zippyshare.com/d/74240052/114177/Samsung_USB-Driver_for_Mobile_Phones-1.5.27.0.exe (direct download link)
Install it and reboot the computer, then plug usb cable in and wait til windows recognizes .your phone.
Good luck!
Click to expand...
Click to collapse
tried the above steps and did not work
windows still cant detect my phone.
edit: even on my windows 7 laptop it wont detect it
Did you kill or uninstall Kies? If so, try a different cable.
Might be Windows 8 ( wouldn't be surprised ) try running kies in Win7 or XP mode etc? Have you allowed USB debugging?
i've tried a different cable and even a different computer all together where i installed win7 on that laptop only a week ago so still fresh. im about to try it on my imac .
If this doesnt work then surely the drivers in question are not correct!
will find the mac drivers
i've tried a different cable and even a different computer all together where i installed win7 on that laptop only a week ago so still fresh. im about to try it on my imac .
If this doesnt work then surely the drivers in question are not correct!
will find the mac drivers.
edit: how can u enable debug mode from recovery?
jonneymendoza said:
i've tried a different cable and even a different computer all together where i installed win7 on that laptop only a week ago so still fresh. im about to try it on my imac .
If this doesnt work then surely the drivers in question are not correct!
will find the mac drivers.
edit: how can u enable debug mode from recovery?
Click to expand...
Click to collapse
Sorry I've read it wrong, didn't realize what TWRP was till I did a bit of research... I suggest emailing TeamWin Projects about it, theirs a few people on their with the same problem, hope you get it sorted.
http://www.teamw.in/project/twrp2/182
So, I cant seem to be able to connect my G2 to the PC via USB cable. I get "usb device not recognized" error, and when looking for the device via LGPC Suite, it says driver not installed and attempts to re-install the driver to no avail. Im using Win 7 64 bit. Here's what Ive done to attempt to fix it:
Tried uninstalling and reinstalling both the driver and LGPC Suite in my normal user account and in admin admin account.
Redownloaded both driver and LGPC Suite and doing the above.
Tried 3 different USB cables.
Tried 2 different USB ports.
Yes, Im changing the connection options on the phone from MTP and LG Software.
Phone charges normally over USB.
I *can* however connect to LGPC Suite via wifi successfully.
Any ideas? Im stumped.
blackangst said:
So, I cant seem to be able to connect my G2 to the PC via USB cable. I get "usb device not recognized" error, and when looking for the device via LGPC Suite, it says driver not installed and attempts to re-install the driver to no avail. Im using Win 7 64 bit. Here's what Ive done to attempt to fix it:
Tried uninstalling and reinstalling both the driver and LGPC Suite in my normal user account and in admin admin account.
Redownloaded both driver and LGPC Suite and doing the above.
Tried 3 different USB cables.
Tried 2 different USB ports.
Yes, Im changing the connection options on the phone from MTP and LG Software.
Phone charges normally over USB.
I *can* however connect to LGPC Suite via wifi successfully.
Any ideas? Im stumped.
Click to expand...
Click to collapse
Sorry for bumping old thread, but have you found a solution? I found my self in exactly same situation as you describe.
Phone is in LG Software mode
LG Suite can find the phone over Wi-fi, other modes work through USB.
Tried on two different computers, with win7/win8 respectively.
Stock EU ROM, just bought it.
Tried different USB ports.
Yet PC doesn't recognize it :/
EDIT: Never mind, solved it by following the following instructions in another thread:
cmahendra said:
You must be on 64 bit windows. Not even on 64bit, Still try this...
1) Uninstall LG Drivers, LG PC Suite and anything you see named LG. Restart PC.
2) Install latest LG Driver from this post (step 4)
3) Install Optional MTP Driver from this post (step 4)
4) Open Windows Device Manager (just to watch whats happening.)
5) Disconnect Internet (To avoid stupid online WDM drivers)
6) Connect phone with Usb and let drivers install automatically. Give it some time to install drivers keeping watch on Device Manager window.
7) Keep changing USB connect modes to all modes one-by-one on Phone and let drivers install.
You should see MTP drivers installed now. If this does not help, cant think of anything else. If this works, press THANKS button
EDIT: Connect USB at backside of pc, directly to USB on pc motherboard.
Click to expand...
Click to collapse