Urgent help needed.. - Touch HD General

Hi. I have the HTC touch HD. I have tried 2 roms (Duttys hd x2 extreme and the other is energy rom) both keep freezing up all the time after a few seconds use. Dont get enough time to even enter a wireless network key before it freezes up. I have tried to go back to the orange update rom from the orange website, that runs really really slow, i have my orange sim in there but it wont register on the network no matter which rom i use. When it loads up the colour is all pixelated and mixed up untill i turn off the screen and back on again then the colour is ok. I have just paid and downloaded the sim unlocker from htc unlocks and that just keeps saying phone is in flight mode.. And now it just rebooted its self for no reason, i wasnt even touching it..
Please help..
Thanks
Shaun

I have been trying to switch on the phone in the comm manager and it just wont switch on....

Some more info would be great.What metod did you use to update the new rom,
did you have any problem before,is this the first cooked rom,etc.

I agree more info would be good, but it sounds like you may not have followed the Guide on how to Flash? Did you use hspl or uspl before flashing? If not then that is your cause.
Read this - http://forum.xda-developers.com/showthread.php?t=505377

ClydeB1 said:
I agree more info would be good, but it sounds like you may not have followed the Guide on how to Flash? Did you use hspl or uspl before flashing? If not then that is your cause.
Read this - http://forum.xda-developers.com/showthread.php?t=505377
Click to expand...
Click to collapse
I think it was hspl.. Im new to all this so im pretty useless with it all at the moment.. Im not sure whet i have done but i have re flashed duttys extreme rom and its all working fine now.. managed to do the sim unlock too..
will have a read of that thread you posted before i do anything more though..
Thanks
Shaun

shaunm41 said:
I think it was hspl.. Im new to all this so im pretty useless with it all at the moment.. Im not sure whet i have done but i have re flashed duttys extreme rom and its all working fine now.. managed to do the sim unlock too..
will have a read of that thread you posted before i do anything more though..
Thanks
Shaun
Click to expand...
Click to collapse
Oh well. Glad to hear you managed to sort it out.

Resolved, thread closed

Related

im just wondering

ok well im flashing my phone and now its been about 40 minutes and my wizard has the circle spinning as of loading something but it gets about half way around the cricle then it like crumbles..
any ideas?
perryhark1 said:
ok well im flashing my phone and now its been about 40 minutes and my wizard has the circle spinning as of loading something but it gets about half way around the cricle then it like crumbles..
any ideas?
Click to expand...
Click to collapse
Did you get it CID unlocked before flashing ? Which Rom you are trying to flash.
Which is your device , G3 or G4 ?
Cheers!
zabardast_1 said:
Did you get it CID unlocked before flashing ? Which Rom you are trying to flash.
Which is your device , G3 or G4 ?
Cheers!
Click to expand...
Click to collapse
i didnt unlock and im using windows mobile6 rom
im kinda new at this.
g4 also
come on guys
help!?i hope i didnt brick it
perryhark1 said:
i didnt unlock and im using windows mobile6 rom
im kinda new at this.
g4 also
Click to expand...
Click to collapse
Oh my my, man you are lucky,thank you tried a wm6 rom which doesn't include any ipl/spl in it,otherwise it wud have been a 'Brick'.
well,if its a G4,it cannot be CID unlocked,but if you wish to upgrade to wm6 rom,then try the 'HardSPL' or 'SoftSPL' method,read and follow the instructions as given in the stickies for 'HardSPL' and 'SoftSPL' in the G4 forum.
now as to recover your phone,download the official carrier's rom and get the phone into bootloaders (multicolor screen) and flash it to recover back to its default status and then try with either HatdSPL or SoftSPL.
Cheers!
ok well my wizard is still connected through activesync on my other pc with shelltool running, can someone give me instructions to recov it?
perryhark1 said:
ok well my wizard is still connected through activesync on my other pc with shelltool running, can someone give me instructions to recov it?
Click to expand...
Click to collapse
well,there was no need to run shell tool,you cud have upgraded your phone easily using 'HardSPL' or 'SoftSPL',much easier and with efficient solution.
ok,now go to link ,you'll find all the official stock roms,download the official rom of your carrier and get the phone into bootloaders (multicolor screen) and flash the rom to recover or you can download the wizard_love rom and flash in bootloaders to recover back. Well,you can also flash the official or wizard_love with shell tool,but flashing by running Ruu is more recommended.
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!
ok well i unplugged the phone and everything is installed so idk lol
thanks anyway

My phone got screwed after upgrading my rom

Hello,
Im not new to rom upgrades ive done it before with many rom releases
I installed this rom like any other
Dutty's HD V3.4 XT
after installing this my cell's screen got blury and when i take it into hypernate and bring it back (press the off button) it get fixed, something i have never had before
Other than that i cannot start the phone proccess, everytime i do, its getting closed.. so my phone got no service now,
I tried upgrading to another rom after trying this one and got the same response
(the phone service is the one allowing me to make phonecalls, the WM6 is starting up fine but really slowly)
Ive even tried hard restarting my device a few times, nothing fixe's this..
Anyone got a solution for this?
http://forum.xda-developers.com/showthread.php?t=505377
DRTigerlilly said:
http://forum.xda-developers.com/showthread.php?t=505377
Click to expand...
Click to collapse
I already flashed my rom 2 times and got those results, what good will this do?
what spl are you on
what my senior member above meant to say is what spl are you on
1.14 or 1.56
check that first and then follow cracwhore's instruction step by step
kingspeare said:
what my senior member above ment to say is what spl are you on
1.14 or 1.56
Click to expand...
Click to collapse
right now i cant check since i left the phone at home and im at work, ill give you guys an answer in a few hours, thanks.
Amit86 said:
right now i cant check since i left the phone at home and im at work, ill give you guys an answer in a few hours, thanks.
Click to expand...
Click to collapse
Reason why you are getting this colour distortion is because you haven't used USPL or HSPL before flashing rom
If you are using USPL you need to re-run USPL before every flash to rom or radio. If you are using HSPL you only need to run it once.
Check your SPL in bootloader
If it says 1.54.0000 you will need to use USPL and then flash 1.56+ rom
As mentioned previously by DRTigerlilly & kingspeare you will need to follow cRaCKwHoRe's guide correctly and make sure you follow the whole guide.
Let us know if you are still having problems or alternatively (and I'd recommend this) post your queries in cRaCKwHoRe's guide thread so either myself, cRaCKwHoRe etc can provide you with better support

1st one who killed the HD2 ;-(

I just HSPL my new T-Mobile 2.08 US HD2.
Worked soooo smooth. Thanks for that. Now the tricky part, I did not read detailed enough that the rom I flashed was a 1.66 based one.
now the HD2 is dead, no powerup, bootloader mode, reset or chargeing led.
Any way to safe it or back to t-mobile?
Thanks Guys
=( omg.... i was impatient too... I was downlaoding all these roms but remembered i didnt install the new HSPL thing.. and then i read the posts -_- sigh.. sorry man
I am so sorry man. Your best bet is to hope you can find a station where they'll work some factory reset magic on there...
Yeah. Sorry to hear that. I wish the SPL program would warn the user or refuse to install if it detected an old 1.66.
No brother
YWell Brother u and me both have to play the old hood wink on tmobile and play the it just died face so we can get a new one. Fortunatly we have 14 days if you kept your receipt, to take it back and nag saying it just shut of for no reason. Its hell of bricked, even HTC would have to completely take it apart to fix it, so no trace of anything would ever come back. the bad thing is their sold out everywhere till Tuesday or Wednesday. But ill wait its a bad ass phone. woooo! where do you live dude? in vegas?
I have read that you can microwave it for a few seconds and that kills it stone dead. No way they can tell what you flashed.
This is a very extreme method and an absolute LAST RESORT!!!!
pablo11 said:
I have read that you can microwave it for a few seconds and that kills it stone dead. No way they can tell what you flashed.
This is a very extreme method and an absolute LAST RESORT!!!!
Click to expand...
Click to collapse
That's.. insane.
madman_nyc said:
I just HSPL my new T-Mobile 2.08 US HD2.
Worked soooo smooth. Thanks for that. Now the tricky part, I did not read detailed enough that the rom I flashed was a 1.66 based one.
now the HD2 is dead, no powerup, bootloader mode, reset or chargeing led.
Any way to safe it or back to t-mobile?
Thanks Guys
Click to expand...
Click to collapse
remove your battery for 3 minutes and put it again and try ti lunch boot loader
Have you tried the SD card flash method.
You need to copy the original Tmob ROM file to your blank SD card, rename it to leoimg.nbh (i Think), and then try start in bootloader.
madman_nyc said:
I just HSPL my new T-Mobile 2.08 US HD2.
Worked soooo smooth. Thanks for that. Now the tricky part, I did not read detailed enough that the rom I flashed was a 1.66 based one.
now the HD2 is dead, no powerup, bootloader mode, reset or chargeing led.
Any way to safe it or back to t-mobile?
Thanks Guys
Click to expand...
Click to collapse
Which hspl did you flash and which rom?
the new one for 1024 T-Mobile 2.08.
Thanks for all replies,
For the Microvawe version, if you smash it with a hammer, has the same effect. Go Green.
No kidding, I ask for a repair solution not a Brick it more.
Bootloader is not working at all, so no SD way as well. And a rom based on 1.66. Smart as I am, I deleted the file.
Like I said, HSPL was great. Was still working after that.
madman_nyc said:
For the Microvawe version, if you smash it with a hammer, has the same effect. Go Green.
No kidding, I ask for a repair solution not a Brick it more.
Click to expand...
Click to collapse
I laughed my ass off so hard at that comment!
So I got it exchanged, I did the Hard spl and its fine so far. Still working.
Dont want to brick it again,
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?
(post removed, wrong thread)
This is why I'm choosing to wait a little bit before jumping in and flashing my TMOUS HD2. I don't have the 'cajones' to be a guinea pig! I'm waiting until everything plays out and the process is tried and proven safe.
For now I'm enjoying the stock TMOUS Rom, and applying tweaks here and there. I'm running into bugs and annoyances here and there, but don't feel a strong urge to flash roms just yet...especially when so many others are having issues!
Yeah, when it comes to the software side of this phone, I just take it all in with the regular rom and see what I REALLY want out of it as far as options and whatnot. THEN I get to the rom goodies after a lot of review and feedback.
Hardware I'll dissect the guts if I have to anyday though.
FloatHeavy said:
Yeah, when it comes to the software side of this phone, I just take it all in with the regular rom and see what I REALLY want out of it as far as options and whatnot. THEN I get to the rom goodies after a lot of review and feedback.
Hardware I'll dissect the guts if I have to anyday though.
Click to expand...
Click to collapse
Yes, but still no answer for me ;-(
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?
madman_nyc said:
Yes, but still no answer for me ;-(
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?
Click to expand...
Click to collapse
I think you'd be much better off browsing all the thread titles in the ROM Development section looking for a rom that is [GER] and [2.08+]/TMOUS based
As long as it's been taken off a TMOUS device, it will work on your TMOUS device
madman_nyc said:
the new one for 1024 T-Mobile 2.08.
Thanks for all replies,
For the Microvawe version, if you smash it with a hammer, has the same effect. Go Green.
No kidding, I ask for a repair solution not a Brick it more.
Bootloader is not working at all, so no SD way as well. And a rom based on 1.66. Smart as I am, I deleted the file.
Like I said, HSPL was great. Was still working after that.
Click to expand...
Click to collapse
he he. I know it's hilarious. As I said, absolutely last resort if you are taking it back for warranty cos if they find any spl other than factory one your warranty is void straight off the bat. Nice to see you got a replacement without problems.
I just read that advice from another post here on the forum and it is way extreme!!!
As posted above - any rom based on tmous original roms should work. Good luck
madman_nyc said:
So I got it exchanged, I did the Hard spl and its fine so far. Still working.
Dont want to brick it again,
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?
Click to expand...
Click to collapse
YOU might use BSB Tweaks and choose manila language in the menu.
I bet it is based on the tool that downloads the needed manila files from the internet.
Try searching for the tool here on xda or use BSB tweak (but there is a solution to get it fully working german!)

Tmobile update Get it now

updated software for the tmo HD2
Sorry I tried to post a link but it wont let me but you can find the link at tmonews
Im downloading it now just thought i would post it before its taking down as i dont think it supposed to be up yet?
anyway have at it
I see that it was released today so no worries and no rush..
I haven't had any problems with mine. no freezers etc. so I am going to wait for feedback. but thanks for the update.
updated two hours ago. just got done restoring all my apps/contacts. so far manila runs smoother. overall the phone seems to run smoother. right now, i'm testing out the text and lag issues i had with the previous rom. so far...so good.
there is already a thread about this in the rom section
http://forum.xda-developers.com/showthread.php?t=681030
So it says the imei number is 15 characters... But mine is 17..
dynomite16 said:
So it says the imei number is 15 characters... But mine is 17..
Click to expand...
Click to collapse
Just enter the first 15 numbers and it should work, it did for me anyway
question... Do I need to remove HSPL from my phone and install stock room, before I run Tmobile update?
Thanks
kliver74 said:
question... Do I need to remove HSPL from my phone and install stock room, before I run Tmobile update?
Thanks
Click to expand...
Click to collapse
No but at this moment there is no HSPL for the new rom so once flashed you will have to reflash the 2.10 rom from the sticky to put spl 2.08 back on and then redo HSPL to flash custom roms.
Duplicate thread. Closed

Bricked my telus HTC Snap s510

hey guy HTC Snap s510 will not turn on. it gets frozen at the smart mobility page. I have tried hard resetting but it doesnt work. i have tried a bunch of different SPL installers but the get through the step, then when it comes time to install the firmware it wont get past 0%. Right now i just want a way to get my device back up and running with or without WM 6.5. thanks and i am really looking forward to getting this fixed. and if you tell me to searth through threads for answers i just spent over 8 hours searching the web for answers and i am about to give up.
tcbert96 said:
hey guy HTC Snap s510 will not turn on. it gets frozen at the smart mobility page. I have tried hard resetting but it doesnt work. i have tried a bunch of different SPL installers but the get through the step, then when it comes time to install the firmware it wont get past 0%. Right now i just want a way to get my device back up and running with or without WM 6.5. thanks and i am really looking forward to getting this fixed. and if you tell me to searth through threads for answers i just spent over 8 hours searching the web for answers and i am about to give up.
Click to expand...
Click to collapse
Moved to general as not rom development.
Have U tried any method of the unbricking tutorial . Try it.
Mr. Clown said:
Moved to general as not rom development.
Have U tried any method of the
yes I have when i try flashing the rom it doesn't go past 0%
i might not be using the right rom so if you have a link to some that would be awesome
Click to expand...
Click to collapse
tcbert96 said:
Mr. Clown said:
Moved to general as not rom development.
Have U tried any method of the
yes I have when i try flashing the rom it doesn't go past 0%
i might not be using the right rom so if you have a link to some that would be awesome
Click to expand...
Click to collapse
Have you tried this? http://forum.xda-developers.com/showthread.php?t=652532. I really don't know if it works with telus, so try it at your own risk.
Click to expand...
Click to collapse
Mr. Clown said:
tcbert96 said:
Have you tried this? I really don't know if it works with telus, so try it at your own risk.
Click to expand...
Click to collapse
I am in the same boat i have read. I have searched. I have spent days looking. I have pulled my hair.
Click to expand...
Click to collapse
I am not sure as to the recovery of the phone itself as I have no experience with that as of yet.
tcbert96 said:
i have tried a bunch of different SPL installers...
Click to expand...
Click to collapse
I do want to confirm for you though, Ozone(Cedar) HardSPL as well as [ROM][CEDA/OZONE][WWE][* 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.2.00.122209] are working with my Telus S510. Hope you are successful in the recovery of the phone, I will post if I come across anything I think may be helpful.
So did u manage to unbrick it?
Made any progress
Please share if u have
: )
I have exactly the same problem, if somone knows how to fix this, please help
Mr. Clown said:
tcbert96 said:
Have you tried this? http://forum.xda-developers.com/showthread.php?t=652532. I really don't know if it works with telus, so try it at your own risk.
Click to expand...
Click to collapse
After allot of time i managed to make mtty to work
and i followed the tutorial.
Now what tho.
I need to flash the original telus rom but i cant find it
Thanks
Click to expand...
Click to collapse
I got through that guide as well, but when it comes time to flash the rom, it hangs at 0% and then gives me error 262. I go through recovery but it still doesn't work. I dont have hardSPL either, is there any way to get HardSPL from bootloader? Also, when i try task 28 in mtty again, i get :
Format start
Fill RSVD information for block 351 to 384
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format end
also, the telus rom you can get from a search.
hm... Thats weird
i cant find the telus rom
I can only find the raw form, and i think you need to cook it or smthn
Anyway, if it doesnt work for you, it wont work for me either, cause we are having exactly the same problem.
It would be awesome if we can Install hard spl from bootloader.
But no1 seems to be able to help us.
We are the only users who are bothering to reply as it seems.
Is it an official signed rom you need or the recooked raws? (Not sure how successful I'll be but if it can help I will see if I can recook them.) As for the official signed rom, I haven't been able to find one myself as of yet.
we need the official telus signed rom
Because we didnt hard spl our phones, we're stack.
So either the official signed rom, or we need to find a way to hard spl our phones through the tricolor bootloader
Any ideas?
I'm stuck at the same with with my Mobilicity Snap. I went through the HardSPL and it said everything was successful but now my phone is bricked because I failed to notice SPL 1.24 still on the tri color screen. I also would like to know if there is a way to use MTTY, some other tool, or get hardspl onto the phone through the bootloader. HardSPL hangs on 0% from the boot loader for me.
Also tried MTTY task 28, task 29, reboot, reflash to no avail.
We all seem to have the same problem, I'm surprised it hasn't been addressed yet.
I guess there's no luck finding a factory rom for the s510 series...?
You guys are braver than me, I won't attempt a flash unless I have an out waiting.
Come one ! Really there is no fix for the file with the bad code ?

Categories

Resources