updated software for the tmo HD2
Sorry I tried to post a link but it wont let me but you can find the link at tmonews
Im downloading it now just thought i would post it before its taking down as i dont think it supposed to be up yet?
anyway have at it
I see that it was released today so no worries and no rush..
I haven't had any problems with mine. no freezers etc. so I am going to wait for feedback. but thanks for the update.
updated two hours ago. just got done restoring all my apps/contacts. so far manila runs smoother. overall the phone seems to run smoother. right now, i'm testing out the text and lag issues i had with the previous rom. so far...so good.
there is already a thread about this in the rom section
http://forum.xda-developers.com/showthread.php?t=681030
So it says the imei number is 15 characters... But mine is 17..
dynomite16 said:
So it says the imei number is 15 characters... But mine is 17..
Click to expand...
Click to collapse
Just enter the first 15 numbers and it should work, it did for me anyway
question... Do I need to remove HSPL from my phone and install stock room, before I run Tmobile update?
Thanks
kliver74 said:
question... Do I need to remove HSPL from my phone and install stock room, before I run Tmobile update?
Thanks
Click to expand...
Click to collapse
No but at this moment there is no HSPL for the new rom so once flashed you will have to reflash the 2.10 rom from the sticky to put spl 2.08 back on and then redo HSPL to flash custom roms.
Duplicate thread. Closed
Related
Hi guys im still very new to flashing and ive googled it a few times and couldnt come up with anything. So here goes:
I flashed to adp 1.5 the newest one out and did the radio update first etc. Then after some reading realized it doesnt have myfaves. So i need to go back to the JF Rc33 untill cupcake officially is modded for the RC version.
I was worried about the radio update, if i do a wipe and then update to 1.42 (or 1.43 i cant remember) will it screw up anything since i did the radio update to upgrade to adp 1.5.
Sorry if im not making sense let me know and ill do my best to explain better?!?!
really do search carefully before you post. somebody has posted a very detailed downgrade guide on the second/third page.
i think the new radio works with old builds. even if the radio is not compatible, you won't get a bricked phone anyway.
That and not having the [email protected] 5 app on your phone is not going to stop you from calling those 5 people for free. I'm actually glade jf1.5 doesn't have it on there i could never stand it
Im sorry i read quite a few of the radio threads and googled most of the keywords i could. I'll take a look again so much info here i easily could have missed it.
I didnt know that those 5 people are regardless of the app. So if i wanted to change them do i just do it online at the tmobile website?
is there any danger then for using adp instead of the RC besides i guess some of the messaging apps arent there?
xenoaurora said:
I didnt know that those 5 people are regardless of the app. So if i wanted to change them do i just do it online at the tmobile website?
Click to expand...
Click to collapse
Yep.
xenoaurora said:
is there any danger then for using adp instead of the RC besides i guess some of the messaging apps arent there?
Click to expand...
Click to collapse
Nope.
Hello,
Im not new to rom upgrades ive done it before with many rom releases
I installed this rom like any other
Dutty's HD V3.4 XT
after installing this my cell's screen got blury and when i take it into hypernate and bring it back (press the off button) it get fixed, something i have never had before
Other than that i cannot start the phone proccess, everytime i do, its getting closed.. so my phone got no service now,
I tried upgrading to another rom after trying this one and got the same response
(the phone service is the one allowing me to make phonecalls, the WM6 is starting up fine but really slowly)
Ive even tried hard restarting my device a few times, nothing fixe's this..
Anyone got a solution for this?
http://forum.xda-developers.com/showthread.php?t=505377
DRTigerlilly said:
http://forum.xda-developers.com/showthread.php?t=505377
Click to expand...
Click to collapse
I already flashed my rom 2 times and got those results, what good will this do?
what spl are you on
what my senior member above meant to say is what spl are you on
1.14 or 1.56
check that first and then follow cracwhore's instruction step by step
kingspeare said:
what my senior member above ment to say is what spl are you on
1.14 or 1.56
Click to expand...
Click to collapse
right now i cant check since i left the phone at home and im at work, ill give you guys an answer in a few hours, thanks.
Amit86 said:
right now i cant check since i left the phone at home and im at work, ill give you guys an answer in a few hours, thanks.
Click to expand...
Click to collapse
Reason why you are getting this colour distortion is because you haven't used USPL or HSPL before flashing rom
If you are using USPL you need to re-run USPL before every flash to rom or radio. If you are using HSPL you only need to run it once.
Check your SPL in bootloader
If it says 1.54.0000 you will need to use USPL and then flash 1.56+ rom
As mentioned previously by DRTigerlilly & kingspeare you will need to follow cRaCKwHoRe's guide correctly and make sure you follow the whole guide.
Let us know if you are still having problems or alternatively (and I'd recommend this) post your queries in cRaCKwHoRe's guide thread so either myself, cRaCKwHoRe etc can provide you with better support
I just HSPL my new T-Mobile 2.08 US HD2.
Worked soooo smooth. Thanks for that. Now the tricky part, I did not read detailed enough that the rom I flashed was a 1.66 based one.
now the HD2 is dead, no powerup, bootloader mode, reset or chargeing led.
Any way to safe it or back to t-mobile?
Thanks Guys
=( omg.... i was impatient too... I was downlaoding all these roms but remembered i didnt install the new HSPL thing.. and then i read the posts -_- sigh.. sorry man
I am so sorry man. Your best bet is to hope you can find a station where they'll work some factory reset magic on there...
Yeah. Sorry to hear that. I wish the SPL program would warn the user or refuse to install if it detected an old 1.66.
No brother
YWell Brother u and me both have to play the old hood wink on tmobile and play the it just died face so we can get a new one. Fortunatly we have 14 days if you kept your receipt, to take it back and nag saying it just shut of for no reason. Its hell of bricked, even HTC would have to completely take it apart to fix it, so no trace of anything would ever come back. the bad thing is their sold out everywhere till Tuesday or Wednesday. But ill wait its a bad ass phone. woooo! where do you live dude? in vegas?
I have read that you can microwave it for a few seconds and that kills it stone dead. No way they can tell what you flashed.
This is a very extreme method and an absolute LAST RESORT!!!!
pablo11 said:
I have read that you can microwave it for a few seconds and that kills it stone dead. No way they can tell what you flashed.
This is a very extreme method and an absolute LAST RESORT!!!!
Click to expand...
Click to collapse
That's.. insane.
madman_nyc said:
I just HSPL my new T-Mobile 2.08 US HD2.
Worked soooo smooth. Thanks for that. Now the tricky part, I did not read detailed enough that the rom I flashed was a 1.66 based one.
now the HD2 is dead, no powerup, bootloader mode, reset or chargeing led.
Any way to safe it or back to t-mobile?
Thanks Guys
Click to expand...
Click to collapse
remove your battery for 3 minutes and put it again and try ti lunch boot loader
Have you tried the SD card flash method.
You need to copy the original Tmob ROM file to your blank SD card, rename it to leoimg.nbh (i Think), and then try start in bootloader.
madman_nyc said:
I just HSPL my new T-Mobile 2.08 US HD2.
Worked soooo smooth. Thanks for that. Now the tricky part, I did not read detailed enough that the rom I flashed was a 1.66 based one.
now the HD2 is dead, no powerup, bootloader mode, reset or chargeing led.
Any way to safe it or back to t-mobile?
Thanks Guys
Click to expand...
Click to collapse
Which hspl did you flash and which rom?
the new one for 1024 T-Mobile 2.08.
Thanks for all replies,
For the Microvawe version, if you smash it with a hammer, has the same effect. Go Green.
No kidding, I ask for a repair solution not a Brick it more.
Bootloader is not working at all, so no SD way as well. And a rom based on 1.66. Smart as I am, I deleted the file.
Like I said, HSPL was great. Was still working after that.
madman_nyc said:
For the Microvawe version, if you smash it with a hammer, has the same effect. Go Green.
No kidding, I ask for a repair solution not a Brick it more.
Click to expand...
Click to collapse
I laughed my ass off so hard at that comment!
So I got it exchanged, I did the Hard spl and its fine so far. Still working.
Dont want to brick it again,
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?
(post removed, wrong thread)
This is why I'm choosing to wait a little bit before jumping in and flashing my TMOUS HD2. I don't have the 'cajones' to be a guinea pig! I'm waiting until everything plays out and the process is tried and proven safe.
For now I'm enjoying the stock TMOUS Rom, and applying tweaks here and there. I'm running into bugs and annoyances here and there, but don't feel a strong urge to flash roms just yet...especially when so many others are having issues!
Yeah, when it comes to the software side of this phone, I just take it all in with the regular rom and see what I REALLY want out of it as far as options and whatnot. THEN I get to the rom goodies after a lot of review and feedback.
Hardware I'll dissect the guts if I have to anyday though.
FloatHeavy said:
Yeah, when it comes to the software side of this phone, I just take it all in with the regular rom and see what I REALLY want out of it as far as options and whatnot. THEN I get to the rom goodies after a lot of review and feedback.
Hardware I'll dissect the guts if I have to anyday though.
Click to expand...
Click to collapse
Yes, but still no answer for me ;-(
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?
madman_nyc said:
Yes, but still no answer for me ;-(
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?
Click to expand...
Click to collapse
I think you'd be much better off browsing all the thread titles in the ROM Development section looking for a rom that is [GER] and [2.08+]/TMOUS based
As long as it's been taken off a TMOUS device, it will work on your TMOUS device
madman_nyc said:
the new one for 1024 T-Mobile 2.08.
Thanks for all replies,
For the Microvawe version, if you smash it with a hammer, has the same effect. Go Green.
No kidding, I ask for a repair solution not a Brick it more.
Bootloader is not working at all, so no SD way as well. And a rom based on 1.66. Smart as I am, I deleted the file.
Like I said, HSPL was great. Was still working after that.
Click to expand...
Click to collapse
he he. I know it's hilarious. As I said, absolutely last resort if you are taking it back for warranty cos if they find any spl other than factory one your warranty is void straight off the bat. Nice to see you got a replacement without problems.
I just read that advice from another post here on the forum and it is way extreme!!!
As posted above - any rom based on tmous original roms should work. Good luck
madman_nyc said:
So I got it exchanged, I did the Hard spl and its fine so far. Still working.
Dont want to brick it again,
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?
Click to expand...
Click to collapse
YOU might use BSB Tweaks and choose manila language in the menu.
I bet it is based on the tool that downloads the needed manila files from the internet.
Try searching for the tool here on xda or use BSB tweak (but there is a solution to get it fully working german!)
hey guy HTC Snap s510 will not turn on. it gets frozen at the smart mobility page. I have tried hard resetting but it doesnt work. i have tried a bunch of different SPL installers but the get through the step, then when it comes time to install the firmware it wont get past 0%. Right now i just want a way to get my device back up and running with or without WM 6.5. thanks and i am really looking forward to getting this fixed. and if you tell me to searth through threads for answers i just spent over 8 hours searching the web for answers and i am about to give up.
tcbert96 said:
hey guy HTC Snap s510 will not turn on. it gets frozen at the smart mobility page. I have tried hard resetting but it doesnt work. i have tried a bunch of different SPL installers but the get through the step, then when it comes time to install the firmware it wont get past 0%. Right now i just want a way to get my device back up and running with or without WM 6.5. thanks and i am really looking forward to getting this fixed. and if you tell me to searth through threads for answers i just spent over 8 hours searching the web for answers and i am about to give up.
Click to expand...
Click to collapse
Moved to general as not rom development.
Have U tried any method of the unbricking tutorial . Try it.
Mr. Clown said:
Moved to general as not rom development.
Have U tried any method of the
yes I have when i try flashing the rom it doesn't go past 0%
i might not be using the right rom so if you have a link to some that would be awesome
Click to expand...
Click to collapse
tcbert96 said:
Mr. Clown said:
Moved to general as not rom development.
Have U tried any method of the
yes I have when i try flashing the rom it doesn't go past 0%
i might not be using the right rom so if you have a link to some that would be awesome
Click to expand...
Click to collapse
Have you tried this? http://forum.xda-developers.com/showthread.php?t=652532. I really don't know if it works with telus, so try it at your own risk.
Click to expand...
Click to collapse
Mr. Clown said:
tcbert96 said:
Have you tried this? I really don't know if it works with telus, so try it at your own risk.
Click to expand...
Click to collapse
I am in the same boat i have read. I have searched. I have spent days looking. I have pulled my hair.
Click to expand...
Click to collapse
I am not sure as to the recovery of the phone itself as I have no experience with that as of yet.
tcbert96 said:
i have tried a bunch of different SPL installers...
Click to expand...
Click to collapse
I do want to confirm for you though, Ozone(Cedar) HardSPL as well as [ROM][CEDA/OZONE][WWE][* 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.2.00.122209] are working with my Telus S510. Hope you are successful in the recovery of the phone, I will post if I come across anything I think may be helpful.
So did u manage to unbrick it?
Made any progress
Please share if u have
: )
I have exactly the same problem, if somone knows how to fix this, please help
Mr. Clown said:
tcbert96 said:
Have you tried this? http://forum.xda-developers.com/showthread.php?t=652532. I really don't know if it works with telus, so try it at your own risk.
Click to expand...
Click to collapse
After allot of time i managed to make mtty to work
and i followed the tutorial.
Now what tho.
I need to flash the original telus rom but i cant find it
Thanks
Click to expand...
Click to collapse
I got through that guide as well, but when it comes time to flash the rom, it hangs at 0% and then gives me error 262. I go through recovery but it still doesn't work. I dont have hardSPL either, is there any way to get HardSPL from bootloader? Also, when i try task 28 in mtty again, i get :
Format start
Fill RSVD information for block 351 to 384
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format end
also, the telus rom you can get from a search.
hm... Thats weird
i cant find the telus rom
I can only find the raw form, and i think you need to cook it or smthn
Anyway, if it doesnt work for you, it wont work for me either, cause we are having exactly the same problem.
It would be awesome if we can Install hard spl from bootloader.
But no1 seems to be able to help us.
We are the only users who are bothering to reply as it seems.
Is it an official signed rom you need or the recooked raws? (Not sure how successful I'll be but if it can help I will see if I can recook them.) As for the official signed rom, I haven't been able to find one myself as of yet.
we need the official telus signed rom
Because we didnt hard spl our phones, we're stack.
So either the official signed rom, or we need to find a way to hard spl our phones through the tricolor bootloader
Any ideas?
I'm stuck at the same with with my Mobilicity Snap. I went through the HardSPL and it said everything was successful but now my phone is bricked because I failed to notice SPL 1.24 still on the tri color screen. I also would like to know if there is a way to use MTTY, some other tool, or get hardspl onto the phone through the bootloader. HardSPL hangs on 0% from the boot loader for me.
Also tried MTTY task 28, task 29, reboot, reflash to no avail.
We all seem to have the same problem, I'm surprised it hasn't been addressed yet.
I guess there's no luck finding a factory rom for the s510 series...?
You guys are braver than me, I won't attempt a flash unless I have an out waiting.
Come one ! Really there is no fix for the file with the bad code ?
T-mobile sent me a text this morning about a major update.... I fell for it! Once installed it try's to prevent custom ROM installs. I was unable to back to energy ROM see attatched pic
Didn't it just wipe your HSPL? Did you try and run HSPL3 again?
Boot loader still displays HSPL but will give it a shot. bastards!
Thanks
I don't know if the T-Mobile version use the same SPL version as the Europe/Asian on (SPL 3.03)
But if this is the case, there isn't a HSPL version who is compatible with the new SPL 3.03 version jet.
So don't use HSPL, and remove HSPL before installation of this Rom!!!
You are using a wrong CustomRUU Flashing utility.
Use the one specific for HD2.
Removed HSPL and re-applied before I saw post about incompatibility... yep does not work... no custom ROM for me for a while looks like
rselva_kr said:
You are using a wrong CustomRUU Flashing utility.
Use the one specific for HD2.
Click to expand...
Click to collapse
I am using the one that worked last night and is packaged with Energy... so if you have any suggestions on which one you might be reffering to would be much appreciated.
If you have removed HSPL, and you will install a custom Rom use the SSPL procedure to install custom Rom.
Like I mentioned before I can't test it fore you (Belgium device) but on the European version I can get custom Rom on this way! (by using SPL 3.03)
Hope this can help you out.
kurt-willems said:
If you have removed HSPL, and you will install a custom Rom use the SSPL procedure to install custom Rom.
Like I mentioned before I can't test it fore you (Belgium device) but on the European version I can get custom Rom on this way! (by using SPL 3.03)
Hope this can help you out.
Click to expand...
Click to collapse
Nada
Thanks for your help thus far... big time bummed... kicking myself!
awagner said:
I am using the one that worked last night and is packaged with Energy... so if you have any suggestions on which one you might be reffering to would be much appreciated.
Click to expand...
Click to collapse
Try with attached and let us know.
Also, try to post a screenshot of your boot screen. It may help for some solution.
I had no issues installing the T-Mobile rom, running Task29 and then flashing radio 2.15.50 and CleanEx Ultra custom rom.
I did this all via USB cable
CustomRUU same issue.. nothing new. here is my boot loader... BootloaderNew is the new Bootloader after installing new T-Mobile update
awagner said:
CustomRUU same issue.. nothing new. here is my boot loader... BootloaderNew is the new Bootloader after installing new T-Mobile update
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
awagner said:
CustomRUU same issue.. nothing new. here is my boot loader... BootloaderNew is the new Bootloader after installing new T-Mobile update
Click to expand...
Click to collapse
Try HSPL3, & select to update to 2.08HSPL from scroll down list.
It may take longer but should work.
If no, then you may need to use SD card flashing method with your original regional ROM.
rselva_kr said:
Try HSPL3, & select to update to 2.08HSPL from scroll down list.
It may take longer but should work.
If no, then you may need to use SD card flashing method with your original regional ROM.
Click to expand...
Click to collapse
Any idea where I can get the original rom? Had one for the TP2 just bought the HD2 a few weeks ago and did not downloader the older rom... I have done all the following to no avail
nerdstrap said:
I had no issues installing the T-Mobile rom, running Task29 and then flashing radio 2.15.50 and CleanEx Ultra custom rom.
I did this all via USB cable
Click to expand...
Click to collapse
Weird that is working... flashing now... no go on Energy ROM... have to retry when it is up
I installed the update just fine. This is the official T-mob US update 3.14.531.1 with radio 2.15.x.x from here: http://support.t-mobile.com/doc/tm54430.xml?
you will be asked for your IMEI identifier.
zkid2010 said:
I installed the update just fine. This is the official T-mob US update 3.14.531.1 with radio 2.15.x.x from here: http://support.t-mobile.com/doc/tm54430.xml?
you will be asked for your IMEI identifier.
Click to expand...
Click to collapse
I can update just fine, but it's going back to custom that is the issue... I am able to go clean ultra but not back to Energy... hmmm
Seems to be 100 percent isolated to Energy ROM... Core Cell Evo and Clean EX both flash perfectly
awagner said:
Seems to be 100 percent isolated to Energy ROM... Core Cell Evo and Clean EX both flash perfectly
Click to expand...
Click to collapse
Have you tried an older Energy Rom it may just be the particular build on the one you are trying to use .