I don't know if any of you had the same problem. I keep the phone in the pocket but once I ended a call with BT handsfree the phone will turn back on and keys are accidentally pressed inside my pocket. Sometimes calls are accidentally dialed. I have to take the phone out of my pocket and turn it off manually to prevent this. Is there any setting that can change that? What about a cab? Thank you for your help!
Related
Hi,
does anyone know how is it possible to disable the LAST NUMBER REDIAL function? If my BT headset is in my pocket it happens many times, that the "-" button is pressed and it activates the LAST NUMBER REDIAL. It is very annoying....you can imagine. Is there any REGISTRY hack or somehing like that to solve this problem?
THX
That has to be one of the most annoying things!
Especially when you are having a moan about someone after the original call!!
Vijay??
Nobody has the same problem?
me too - it happens for me because I changed the LaunchAPEnable registry setting from 1 to 0 to send the sound to my headset over BT
WOlfgang
Can you clarify this problem? Which button is it that's being pressed? Hardware key or on the headset?
Explain clearly and I'll look into it and if I can help...
V
Vijay, you're too kind for your own good.. heh heh. (but we all appreciate it )
I had this problem with my BT headset and speaking for myself, it's when you hold down the button on the headset, you'll initiate last number redial.
If you just press the button you'll launch Voice Dialler..
I used to keep my BT headset in my pocket and I had both these issues.. eventually I resolved both of these problems by buying a £3 neck strap off ebay and wearing the headset round my neck.. :wink:
cheers,
gaspx
--
BT on for nearly 2 weeks!!
gaspx: there is a technique I'm working on which might help us out here.
It's messy and very very early stages right now, and sent me over the edge last weekend. But if the technique works, it'll open some very interesting doors. Please remind me in a few days. I'm afraid that I can't think of a quick solution, but in my usual style, an unnecessarily complicated solution might surface...
V
i have had the same problems aswell...
although i have been looking into the phone tools that only turn the bluetooth on when you have a phone call,
i am wondering if that will allouw bluetooth to turn on when transfering audio
VJVolubilis will automatically enable bluetooth and transfer audio (or attempt to).
V
Anyone figure out a way to do this yet? It sucks because I keep accidentally calling people from my headset.
I've looked around for a solution to this problem for a while now. Anyone come up with something? Vijay?
Any development on this issue yet? I accidently called twice today. Very annoying because I kept my BT headset in pant's pocket. Please help, Vjay and others professors.
How about powering down the headset? Maybe I don't get it but....
I just triple-checked, my Motorola H500, H820 & H700 will reconnect when I power them back up & press the button once as long as the phone's BT is on, even mid-call. Do these newfangled machines not offer that? What I do is answer the call on the unit w/ one ear and if I think it'll be more than a minute, I put the headset on the other ear to power it up, press to connect, and I don't miss a word (not on the H820, I'll take a pause to switch to that one when I pull it out of my gadget-laden diaper bag. Every mom needs a BT headset!). I think it'll hook up even during ringing, but calling from my skype seemed a little overkill for this response.
(I'm using a modified/very-simply-reduced version of the Jaguar ROM on a wizard at the moment, and many of Vijay's venerably ingenious tools.)
I use Dopod M700 and Handfree bluetooth Sony ericsson HBH-DS-970, I have problem about handfree.
After I compaired such devices, I could listen MP3 by DS-970 through WMP. It's worked and give qaulity sound! But, when I used DS970 as handfree/small talk, It's not worked. I could not answer/call by using DS-970. When incoming call while I listen MP3, WMP stopped but I could not recieved call through DS-970, I must recieved call by M700 only.
How should I do? Help me pleaseeeeeeeeeeeeeeee.
PS : I used official rom and did not install any program.
Go in Comm Mgr BT settings and refresh your DS970 services and ck: handsfree and wireless stereo, save. See if the phone part works.
And if that doesn't work, maybe since the DS970 can only be paired with one phone, it needs to be re-set - then re-paired. I think the instructions are on page 10...yep, found my book: Turn off headset, then press and hold the on/off for 5 secs - you will hear a long beep. Now it is ready to be paired. Next: press & hold the on/off and call handling button simultaneously for 5 secs. The headset will turn off.
When I turn on BT, I find it best just to go into BT devices and refresh the services on the DS970. It seems to behave better...
Thank you very much. I made follow your advise. It's almost ok, but when incoming call, no ringtone in both M700 and DS-970 but it show number and contact. In M700 vibrated only and no ringtone in both M700 and DS-970.
May M700 did not work with DS-970???
Any suggestion. Thank you.
Hello
I've similar problem, i can hear songs etc... i even hear the ring when somebody calls on my DS-970, but when i try to accept the call using DS-970, it is not being accepted, and if press the answer button again, the bluetooth gets disconnected and the phone starts ringing.
Not sure what's causing it.
I'm using O2 Exec with the latest rom.
Please guide
Greets
Hello
No problem i just found the solution to it:
Here's what I did:
* I deleted the HBH-DS970 from the list of BlueTooth devices
* Then I bonded them again (by setting the the little switch on the headset to the left and pressing the power button for about 5 seconds after it had powered on
* Now I move the switch over to the right
Now I can listen to music and when I have an incomming call, I get a short "beep", and I just press the mic button to answer. Then the music pauses, and resumes when I hang up.
Greets
funtoosh said:
Hello
I've similar problem, i can hear songs etc... i even hear the ring when somebody calls on my DS-970, but when i try to accept the call using DS-970, it is not being accepted, and if press the answer button again, the bluetooth gets disconnected and the phone starts ringing.
Click to expand...
Click to collapse
It happened to me when I tried DS970 at the SE shop today. Saddly that I was going to buy it
I am using Atom Life
I am looking for a tweak or registry fix/setting to help me with the following problem:
On my parrot bluetooth car kit in headset mode after a call is finished the phone stays on. This is not a problem if you finish a normal call without handsfree because you switch it off manually but when you are driving with the phone in your pocket, the phone is liable to screen presses. I have been inadvertently creating/editing contacts and making notes with the phone in my pocket after use in the car.
The screen autopower off does work if the screen is not activated for a few minutes but the inadvertent screen presses occur within this timeframe.
Any help is appreciated - thanks!
I have a similar problem when using my bluetooth headset (Samsung WEP200)…
When I make a call using the headset the screen stays active, and if I turn it off during a call it turns it self on again after the call has ended. Not fun if it’s in my pocket and it decides to call someone back without me knowing.
Is there a general setting or fix that disables the screen when you answer or make a call with the headset active?
Have you found any solution to this?
aneben said:
Have you found any solution to this?
Click to expand...
Click to collapse
Nope, not yet…
I can’t believe that there aren’t a lot more people with this problem!? It’s a REALLY STUPID problem to have on such an advanced phone like the Blacksone when nearly EVERY basic mobile phone has this feature since the dawn of BT headsets.
This might leave me no other choice than to retire my beloved Blackstone and dig up my old Samsung phone so that I can drive my car safely with my phone in my pocket…
There is an app called Touch InCall Screen Tweak. With that you can configure so that screen will go off quickly when answering and ending calls and bluetooth headset is used. It works great for me!
aneben said:
There is an app called Touch InCall Screen Tweak. With that you can configure so that screen will go off quickly when answering and ending calls and bluetooth headset is used. It works great for me!
Click to expand...
Click to collapse
I actually tried that app yesterday but didn’t get it working as I wanted. How did you configure it?
I guess I can try it again – would be great if it works!
Well, now I can make a call without worrying about it to end (with the InCall Touch app), but when the call is ended we're back making random calls without knowing to whom.
This amazes me, how this feature can be missing. It’s not something I admit to my iPhone friends who still tries to find something that Blackstone can’t do – cuz this even works on the iPhone!
I'll try tweaking till I or someone else can find a solution to this rather embarrassing problem.
Having a problem with bluetooth. When my headset is paired, I have no problems answering and making calls. However, on my previous phone, if I pressed the answer button on the phone itself, then I could talk on the phone without the headset. I like this option since I usually only use the headset in the car, but don't like wearing out in stores etc. But now when my phone rings and my headset is in my pocket, I'll pick up my phone, press the answer call button, and can't hear anyone since the call is coming through the headset in my pocket!
Any fix for this?
Thanks,
Tim
.
Any help out there for this? Thanks!
Tim
Ok, this is really annoying:
Every time I make a call, the screen turns of when I place the phone to my ear. However, when the person I call answers, the screen wakes up again. I have repeatedly managed to end call, turn on speaker etc. using my cheek. The only solution Ive found is to remove the phone from my ear for a while and then bring it back. The screen then turns of for the duration of the call. The only problem is that its really annoying and that I cant here whatever the other person is saying for a couple of seconds.
So, does anyone know of a better solution?
I have the same problem. Any advice will be greatly appreciated.
I did a hard reset and though I have not installed alla software back I use TouchLockPro and it does not wake up anymore when call is connected.