Hi,
does anyone know how is it possible to disable the LAST NUMBER REDIAL function? If my BT headset is in my pocket it happens many times, that the "-" button is pressed and it activates the LAST NUMBER REDIAL. It is very annoying....you can imagine. Is there any REGISTRY hack or somehing like that to solve this problem?
THX
That has to be one of the most annoying things!
Especially when you are having a moan about someone after the original call!!
Vijay??
Nobody has the same problem?
me too - it happens for me because I changed the LaunchAPEnable registry setting from 1 to 0 to send the sound to my headset over BT
WOlfgang
Can you clarify this problem? Which button is it that's being pressed? Hardware key or on the headset?
Explain clearly and I'll look into it and if I can help...
V
Vijay, you're too kind for your own good.. heh heh. (but we all appreciate it )
I had this problem with my BT headset and speaking for myself, it's when you hold down the button on the headset, you'll initiate last number redial.
If you just press the button you'll launch Voice Dialler..
I used to keep my BT headset in my pocket and I had both these issues.. eventually I resolved both of these problems by buying a £3 neck strap off ebay and wearing the headset round my neck.. :wink:
cheers,
gaspx
--
BT on for nearly 2 weeks!!
gaspx: there is a technique I'm working on which might help us out here.
It's messy and very very early stages right now, and sent me over the edge last weekend. But if the technique works, it'll open some very interesting doors. Please remind me in a few days. I'm afraid that I can't think of a quick solution, but in my usual style, an unnecessarily complicated solution might surface...
V
i have had the same problems aswell...
although i have been looking into the phone tools that only turn the bluetooth on when you have a phone call,
i am wondering if that will allouw bluetooth to turn on when transfering audio
VJVolubilis will automatically enable bluetooth and transfer audio (or attempt to).
V
Anyone figure out a way to do this yet? It sucks because I keep accidentally calling people from my headset.
I've looked around for a solution to this problem for a while now. Anyone come up with something? Vijay?
Any development on this issue yet? I accidently called twice today. Very annoying because I kept my BT headset in pant's pocket. Please help, Vjay and others professors.
How about powering down the headset? Maybe I don't get it but....
I just triple-checked, my Motorola H500, H820 & H700 will reconnect when I power them back up & press the button once as long as the phone's BT is on, even mid-call. Do these newfangled machines not offer that? What I do is answer the call on the unit w/ one ear and if I think it'll be more than a minute, I put the headset on the other ear to power it up, press to connect, and I don't miss a word (not on the H820, I'll take a pause to switch to that one when I pull it out of my gadget-laden diaper bag. Every mom needs a BT headset!). I think it'll hook up even during ringing, but calling from my skype seemed a little overkill for this response.
(I'm using a modified/very-simply-reduced version of the Jaguar ROM on a wizard at the moment, and many of Vijay's venerably ingenious tools.)
Related
Hi,
Is there anything that can be done to improve the mic volume when on speaker phone - I have had complaints when more than a foot or so away that people can't hear me.
I have the phone open on my desk most of the time and am just trying to work out the best way to deal with calls as they come in. At the moment unplugging the USB and then flipping the screen and then trying to answer the call seems a bit ham fisted and I keep on loosing calls
I personally never use my MDA Pro as a conventional phone. I find it too bulky. My own method is to always use a bluetooth headset.
If I was in your situation, I would have the Universal open on my desk, with the bluetooth headset lying beside it. When the phone rings, simply put on the bluetooth headset,press the call receive button on it, and away you go.
You don't really need to flip the screen, just close it and then use the green button to answer the call. Will work fine with the USB connected if you don't mind people looking at you strangely.
Hi Guys,
Thanks for the responses.
I don't have a headset so haven't gone down that route yet. Will they work with Skype and VOIP software etc on the phone?
As for closing and then picking up, I'm wondering if the phone has a problem because I have tried this a couple of times and have lost the calls although I am generally unplugging the USB, closing the phone and then answering - have only had the phone a couple of days so still getting the hang of it.
Hmmm....can it be used when in pda mode to answer and make calls... I have tried this, but I think either my machine's mic & speakers dont work on the inside (screen side) of the clamshell, the other person on the line can't hear, and I hear their voice (distantly), which means it is coming out of the back of the screen, not the front. Its either that or the device just isnt designed to work in this orientation.
Has anyone else tried recieving or making calls with the screen facing out in portrait mode?
Re the Bluetooth headset answering method, great idea, I do this, but I have found that sometimes my o2 blue headset loses the pairing when I press the answer call button, so I lose the call anyway.
Can anyone tell us how it should work, will the recent rom upgrade fix this, is there even a mic and speaker on the inside lid?
Can anyone tell us how it should work, will the recent rom upgrade fix this, is there even a mic and speaker on the inside lid?
Click to expand...
Click to collapse
The Mic is right next to the power button, so it is as close to your mouth when in PDA mode or closed. Also There are two speakers on the hinged lid, in PDA mode it's the slightly recessed oval shape 10mm from the top dead centre.
I've never discovered a software method of disabling this speaker. Possibly a hardware fault? Might be worth discussing with your handset provider
Using my 8525 for a bit over a month now, and I love the phone. Plenty of hacks/tweaks/edits and the phone is just how I like it right now.
Driving a 2005 Acura TL with the built in HandsFree Link and the phone paired seamlessly.
Recently, I notice that while on a call, sometimes the BT Link will drop and automatically transfer the call to the handset. This only happens here & there, not every call. Once call so far after I hung up in the car, the phone was still on and I ended up leaving someone a 6 minute voicemail of me driving, listening to music.....that can be dangerous!!!
Any help or suggestions?
Thanks,
John
i HAD SOME DISCONNECTS WHEN I RECEIVING MESSAGES..IS THAT IT?
No, it will just drop the bluetooth signal mid-call, then to get the car to recognize the phone again, I have to turn off the car and turn it back on to reset connection.....
johnny--2k said:
Recently, I notice that while on a call, sometimes the BT Link will drop and automatically transfer the call to the handset. This only happens here & there, not every call. Once call so far after I hung up in the car, the phone was still on and I ended up leaving someone a 6 minute voicemail of me driving, listening to music.....that can be dangerous!!!
Click to expand...
Click to collapse
I've had the same problem, only once or twice in about a week, using my Jawbone bth headset. Very disconcerting, but survivable. I can see where losing the car pairing might be a bit more problematic.
I wonder if this is because of the /weak/ Bth stack on the TyTN???
-Humbert
Possibly. I thought I saw some upgrades for the BT Stack on here somewhere but now I cant seem to track them down.
Something about the BT Radio shutting down or going into sleep mode after a while and a registry edit to keep it on at the sacrifice of minimal battery life which is fine by me...
Didn't read you mentioning it, but does bluetooth power off during the breaking of the link? If it does, read on and try the following..
not sure if this will help, but try to disable your auto power off options, uncheck the on battery power and on external power..
I had this solved some bluetooth problems especially using the Hermes Widcomm hack and MSI Blueplayer..
Yes, the BT does turn off, but then on again automatically as soon as the call is ended.
Where are you talking about? Is this in the registry or the BT Settings? I was not sure if the WidComm stack is fully functional as of yet, if so, is it in the Wiki?
Thanks again,
John
The WidComm stack is definitely NOT fully functional yet. One of the problems I have with this stack is that, the bluetooth will power off when my wizard turns off or goes into standby, which is not normal!
Not it is not a registry setting, but it is just how it behaves on my system. Sorry for not being a help... I know how the MS Stack pisses people off..
Best regards,
Eugene
Hey, every little bit of info I can get helps....
Thanks for the info on the WidComm Stack....I might just wait and deal with the MS untill the WC is fully functional and possibly in CAB format....just to make life all the easier!
OK, So today my phone would not drop the BT signal from my car.....after being home for 4 hours, it was still trying to use the HandsFree when recieving or making calls....took me a minute to figure out because the dialer skin I have is black at the top, so I could not see the headset icon at the top and was wondering why I could not hear anyone or use speakerphone.
Hopefully it was just a freak accident and wont happen again, but just incase, any suggestions?
Hi,
I had MS voicecommand and my Jawbone working fine on my old tytn after some registry tricks.
However, now I cannot seem to get VC to start when I press my button on my Jawbone.
I can get it to start with a hardware button on my touch(Vogue) but I cant get the BT headset to start it.
Its really frustrating as I really need this when Im on the road driving all day long for work.
Thanks and help!!!!
Regards,
LIP
lip said:
Hi,
I had MS voicecommand and my Jawbone working fine on my old tytn after some registry tricks.
However, now I cannot seem to get VC to start when I press my button on my Jawbone.
I can get it to start with a hardware button on my touch(Vogue) but I cant get the BT headset to start it.
Its really frustrating as I really need this when Im on the road driving all day long for work.
Thanks and help!!!!
Regards,
LIP
Click to expand...
Click to collapse
This is going to sound crazy, but check to see if you have the Cyberon Voice Dial active. If it is NOT, then activate it and try to activate Voice Command with the headset. I could not get my handsfree to activate until I turned the Cyberon back on, which doesn't make sense but it worked and works every time, and I never get that stupid Cyberon thing popping up or doing anything. Also, do you just press the button on your Jawbone, or hold it in for a bit. I know on my one handsfree I could just press it, but on my new one I have to hold it down until I hear a beep (like 3 seconds). Hope this helps.....
Thanks for the reply!
Unfortunately I deleted all the registry keys and files relating to that software due to me thinking it was the culprit...
I'll do a hard reset and try that tonight and report back.
Thanks!
LIP
Actually the culprit of this problem is Windows Mobile 6. This problem has been discussed on past occasions and as of yet there is no solution that I am aware of.
Hi,
I don't understand why others can get it working but I can't.
I have done all the work arounds with the registry files, etc...but I cant even get it to activate through the BT headset.
I have went back to the default software as that works fine although I had to manually do the voice names.
Regards,
LIP
G'day xda-dev's,
I hope you can help me (and a lot of other fellow X1 owners) with a strange phenomenon regarding several x1 + original wired headset.
1.) Pick up a call with the button on the microphone housing. It does not work for many X1 users. Only work around: plug in headset while telephone is ringing. After that you can pick up calls with the headset-button; until the next soft reset. Then you have to do the procedure again. Rather annoying to call oneself every time you leave the house and you want to use the wired headset.
2.) Blow into the headset's microphone and the phone will terminate (hang up) your ongoing call. Check it out, it works on many units.
3.) Microsoft voice command. The microphone button does not trigger voice command. Very sad about this since it would be very useful when your phone is burried underneath layers of warm winter clothing. Anyone having the same observation? BTW: VC works with my bluetooth headset seamlessly.
I searched this forum and I could not find any thread or fix regarding these issues. Anyone who can help?
Thanks!
Graf Zeppelin said:
G'day xda-dev's,
I hope you can help me (and a lot of other fellow X1 owners) with a strange phenomenon regarding several x1 + original wired headset.
1.) Pick up a call with the button on the microphone housing. It does not work for many X1 users. Only work around: plug in headset while telephone is ringing. After that you can pick up calls with the headset-button; until the next soft reset. Then you have to do the procedure again. Rather annoying to call oneself every time you leave the house and you want to use the wired headset.
2.) Blow into the headset's microphone and the phone will terminate (hang up) your ongoing call. Check it out, it works on many units.
3.) Microsoft voice command. The microphone button does not trigger voice command. Very sad about this since it would be very useful when your phone is burried underneath layers of warm winter clothing. Anyone having the same observation? BTW: VC works with my bluetooth headset seamlessly.
I searched this forum and I could not find any thread or fix regarding these issues. Anyone who can help?
Thanks!
Click to expand...
Click to collapse
It's happened to me too. In my case, when I make a call, the microphone that active is the handset one not the headset like it should be. I have to raise the handset to my mouth while speaking. This is very frustrating.
yes, i have the same problem...
and like kanthai the mic that works its the mic of the pda and not from the headset...
Complain to SE about it then.
i bought the phone outside mi country and i havent support
is there any solution to the problem described by the op known by now?
Graf Zeppelin said:
G'day xda-dev's,
I hope you can help me (and a lot of other fellow X1 owners) with a strange phenomenon regarding several x1 + original wired headset.
1.) Pick up a call with the button on the microphone housing. It does not work for many X1 users. Only work around: plug in headset while telephone is ringing. After that you can pick up calls with the headset-button; until the next soft reset. Then you have to do the procedure again. Rather annoying to call oneself every time you leave the house and you want to use the wired headset.
2.) Blow into the headset's microphone and the phone will terminate (hang up) your ongoing call. Check it out, it works on many units.
3.) Microsoft voice command. The microphone button does not trigger voice command. Very sad about this since it would be very useful when your phone is burried underneath layers of warm winter clothing. Anyone having the same observation? BTW: VC works with my bluetooth headset seamlessly.
I searched this forum and I could not find any thread or fix regarding these issues. Anyone who can help?
Thanks!
Click to expand...
Click to collapse
I experienced the same problem of your Item 1.
I took both my headset and the phone to the SE service centre for checking. They told me this is a bug and the problem can be resolved by inserting the headset jack very slowly into the phone. I don't know why but it works for my phone.
SE said needs to wait for an updated firmware to fix the bug, although no one has any idea when it will be
Same here
SE needs to fix this for us!!
But we got a cool way to end a call....blow in the mic! LOL
Hello XDA crew,
I have some problems and I hope you can help me with that. Xperia phone is really cool but one thing for me is really annoying. And that is the calling performance of Xperia.
These are the main problems:
1. When I plug in the headset, the ringtone plays both on the headset speakers and the phone speaker. Is there a way to let the ringtone play only on the headset speakers?
2. When I plug in the headset, the microphone of the headset isnt active. Only the microphone of the phone is active. So, people can not understand me when I speak to the headset microphone. But they can hear me when I talk to the microphone of Xperia.
These are some other problems but not so important for me:
3. The volume of the call is too high. Even when I set the volume low, people can hear the person who I am talking with.
4. Microfone of Xperia get active after for about two seconds when I answer the phone. So, I have to wait for about 2 seconds to say 'hi'.
5. The answer button of the headset doesn't work.
Can someone help me with this problems or just one of these problems?
Note: I have hardreset my phone two times and reinstalled the ROM software one time via SEUS. I didnt get any result. I have the original Vodafone R2 software.
I have the 2 second delay too. Using gtrab wm6.5 custom rom
M.Ozturk said:
Hello XDA crew,
5. The answer button of the headset doesn't work.
Click to expand...
Click to collapse
Unplug the headphone jack during a call and plug again (during the same call) and press the answer button. It will terminate the call and start working (until your next xperia soft reset). Double-press the answer button when idle, and it will repeat the last call. If that doesn't work, try it again and again after the first trick of plugging/unplugging and it will work on your 4th/5th try. From then on, all answer/hangup/'repeat last call' functions will work. Until you soft reset of course.
I'm calling a toll free (service center) number to do the trick whenever I have to use the handsfree.
VanAuberjim said:
Unplug the headphone jack during a call and plug again (during the same call) and press the answer button. It will terminate the call and start working (until your next xperia soft reset). Double-press the answer button when idle, and it will repeat the last call. If that doesn't work, try it again and again after the first trick of plugging/unplugging and it will work on your 4th/5th try. From then on, all answer/hangup/'repeat last call' functions will work. Until you soft reset of course.
I'm calling a toll free (service center) number to do the trick whenever I have to use the handsfree.
Click to expand...
Click to collapse
It works (on a WM6.5 rom also)
Nice little trick there, thanks
Tnx for the trick vanauberjim. So it seems more like a hardware problem. Anyway, I will try it tomorrow. Hope that the main problems also be solved like this.
Both 2. and 5. get fixed with the trick, but I just hope SE will find a permanent fix. It's not a solution to unplug and replug the headphones during calls.
My question is: are we the only 3 persons that have this problem? Is this problem originally caused by the headset hardware? Is it caused because the plug is so tight that it severely scratched the middle ring in the headphone jack and it can't always make a connection with the middle ring (the microphone one)? How many people have this problem?
Have the same problem
I do have the same problem and workaround works for mee to but it is annoying!
@vanauberjim, I can ensure you that we are definitely not the only one with these problems. I saw on a popular dutch forum that a lot of people have exactly the same problem.
M.Ozturk said:
@vanauberjim, I can ensure you that we are definitely not the only one with these problems. I saw on a popular dutch forum that a lot of people have exactly the same problem.
Click to expand...
Click to collapse
Have you tested with another hands-free set ? is it the phone or the hands-free causing the problem?
I have send my hands-free to SE yesterday so they will check it and if it was ok I will send the phone back.
About 3 seconds of delay when I answer , I haven't done anything yet , is it a bug , I mean do we have this problem or every X1 out there.
Ok, post back soon because if it's faulty hands free we only have 6 months warranty on handsfree (and battery) and time's running out. The phone has 2 years warranty so we have plenty of time for its handset's faults.
I got the same problems, is annoying BTW ... and about the trick mmm quiet annoying as well, but if is the only way to make it work, no more than just do it.
shwan_3 said:
Have you tested with another hands-free set ? is it the phone or the hands-free causing the problem?
I have send my hands-free to SE yesterday so they will check it and if it was ok I will send the phone back.
About 3 seconds of delay when I answer , I haven't done anything yet , is it a bug , I mean do we have this problem or every X1 out there.
Click to expand...
Click to collapse
I think it's a phone problem. I use the original headset and sometimes when I plugin the headset the phone calles the person who I have called earlier. Now I have another stupid problem. When I plugout the headset, the phone still thinks that the headset is plugged in on the phone. I see the headset icon on the phone and when I call someone, I cant hear and speak with the person. Only way I can do this is to plugin the headset again and speak that way. When I plugin and plugout for several times, the headset icon dissapears and I can make my call again without a headset. I think that alle these problems are because the jack plug doesn't function good.
Another issue. I call it issue because it's not a problem, but just a stupid choise of sonyericsson:
- Some soundnotifications during calling like 'busy tone' or 'waiting tone' plays from the main speaker of the phone in instead of the calling/ear speaker. This way, all the people who are sitting next to you hears that the person who you are calling is busy
It will be for the 4th time that I go to the shop with a problem. So I will ask to the shopper if I can choose another phone. I'm thinking about the Touch Pro 2. I'm sick of the problems of Xperia. Don't think that HTC will have the same problems.