Related
Hi everyone!
I've had PDA phones since a couple of years now, and I've always been searching for something.
Here is my problem:
When the phone needs an internet connection, windows mobile automaticaly tries to connect with the 3G connection.. As I don't have an unlimmited 3G connection, it's very annoying..! That's why I have to manually turn the Wifi "ON"
What I am searching for
I'd like a very intuitive and simple software that ask (with a popup for example) which connection to use (Wifi/3G) when the phone needs the internet.
Hope you understood what i'm searching for..!
While not a solution NoData might help part of your problem in the interim.
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility/
It will at least let you disable 3G/GPRS when you need to so you don't go over.
Thanks for the answer, i know this solution.. But that's not really what i'm searching for..!
Maybe You can create a fake connection for 3G so the phone doesn't get to connect? Just an idea, haven't tried. It still leaves the WiFi problem - why there isn't an option to select which connection to use if one is needed...
depending on what rom you have im sure comm manager has buttons for wife and data connection, with basic on off control for each.
However Id have thought someone could write something which would switch between data connection enable and wifi disabled (when out and about) and the other way around when you have wifi available and dont want to use up your 3g allowance.
I don't think it's that easy
that Comm part is build into WM, so the developer would need to write a new shell that acts as internet and gives you the option of selecting the connection..
I do like the idea though
hmmm,
is perhaps feasible with Mortscript?
In which one intercepts the “Internet” call and then by Popup the choice would have?
Hi,
I did search the whole forum for answers but in vain. Whenever I access weather tab and update the info, it updates using 3G/HSDPA.
But, what I want is to update using wifi at home. Is there an option to make it use wifi instead of 3G/HSDPA?
Pls lemme know coz it wud help me save a few penny
TIA
SK
Well I did the following.
1) As I don't want any applications (in background or by request) to update via any Phone Network I deleted the internet setting.
Now I can connect via USB or Wifi and then download, both work.
If I do it when I am not connected then I get an error message (as I have no internet connection setup).
So this works for me but also means I have to remake a internet connection if and when I want to download of phone network.
I have no flat rate data plan so its my only choice, maybe others have a better idea.
really strange, mine uses wifi and if there is no wifi, it relies on gprs.
cx2k5 said:
really strange, mine uses wifi and if there is no wifi, it relies on gprs.
Click to expand...
Click to collapse
Which is correct as far as I can see.
The issue here seems to be he does not want to download via gprs and I have yet to find an option that allows you to turn it off.
The choices are Download automatically
Download weather when roaming
What is missing is that stops you downloading via GPRS but allows you to download via WIFI and when connected.
Problem
cx2k5 said:
really strange, mine uses wifi and if there is no wifi, it relies on gprs.
Click to expand...
Click to collapse
Thanks 2 all for ur reply
Actually the problem is:
I have router at home and my touch hd connects to wifi to update mails, etc.. But when I switch to weather and update, it somehow doesnt identify the wifi connection. Instead uses 3G for updating...is it happening only in my mobile?
And I guess nodata might just work...lemme chk that out ....Thanks a ton
Mine too used to use what it wanted, hspda as first choice. So i deleted the 3g configuration. From what i have read, it is a WM problem: no way to set 3G as secondary choice
bbonzz said:
Mine too used to use what it wanted, hspda as first choice. So i deleted the 3g configuration. From what i have read, it is a WM problem: no way to set 3G as secondary choice
Click to expand...
Click to collapse
oh i c...pls tell me how u deleted the 3g config and then did that take wifi for updating after doing so???
sriramkrishnan06 said:
oh i c...pls tell me how u deleted the 3g config and then did that take wifi for updating after doing so???
Click to expand...
Click to collapse
start->settings->connections->connections
here you see (don't know how exactely in english, since i have italian)
internet (???)
work
under internet, "modify"
enter there, and delete your 3G account.
Now back in connections, go advanced->select (net???) [the first button over composition rules]
Here select "work" for everything.
Now, without 3G, the phone connects to internet only if you have an active wifi, otherways doesn't connect.
Wouldnt it just be easier to use the HD tweak utility to disable internet access via 3G/GPRS/HSDPA? - just a thought guys, instead of deleting settings which may be required at a later time (i.e. when no WIFI is available)
My weather updates fine via WIFI,
My emails (using a hotmail account) keep trying to update via 3G though - I can't get it to do it via WIFI unless I use Windows Live to login then update emails
Would, but as you see there are problems (and i suspect hd tweak kills also mms's, since excludes all data connections). Instead, deleting the account, is easier. I can always reinstall it with the connection wizard.
try this: disable or delete your gprs connection, enable wifi and try to download weather data. if successful, then re-enable your gprs connection and see if it still prefers to use gprs or wifi at first place.
Use modaco NoData to make sure the 3g connection is never used.
Done
Thanx a ton for ur help...I used Nodata and my work was done...sweet and simple...
Thanx
I have a similar problem, just wanted to open a topic about it
Unfortunate, weather is not updating any more, no Wifi, no 3G.
I do not mind it using 3G, but it's not updatingf, nothing works.
I am not even sure how to delete the default 3g connections.
i will try .. i hope i will not have to hard reset the phone again
Ummm... u bought £500 phone and yet can't afford a 50kb 3G/GPRS bandwidth per month?!
Quite intriguing
@zoomee
To make email use WIFI and 3G as a fallback, in email account settings change connection to "The Internet" (it's probably set to your 3G Access point e.g. "T-mobile internet")
Maybe your settings are wrong. Does QuickGPS work? If it doesn't, then check your settings. With some access points of some operators, you can only browse internet pages but not use other apps requiring internet access.
@sriramkrishnan06: no problem
I am affording a 3g Connection and Bandwidth (if that was pointed at me).
I can not get any more weather data (
I deleted as explained here some of the previous set connections to my 3g provider and also rebuild one, and still nothind
throguth Wifi it seems not to work, but through 3g, not any more
it was working before, i had to hard reset it and now it does not work any more
I think it was pointed to sriramkrishnan06.
Anyway, have you checked whether QuickGPS works or not?
The Quick GPRS works form me, Weather still does not work
I am little upset since i know i am missing something small. I am not THE thech savvy guy, but i know my whay arroud computers, (i am a web developer) still, somehow i am not able to make the damn weather work, even tried one of the "hacks" witht e weather database editoer, to load the default server, it is still not working for me.
If anyone has an idea .. please ..
If Quick GPS works then I have no idea. Are you sure you didn't mess up anything using that tool?
In any case, hard resets almost always work. If you don't want to, you could do a full backup with Resco Backup or similar, hard reset, test the weather, then restore the backup.
Is there anyway to make the phone connect to the internet using wifi before it will use alltel?
I know how to set my wifi adapter to access the internet.. But alltel data is always active and I cannot even utilize the wifi feature.
The only way i have been able to get it to use Wifi for internet is if I delete the alltel data settings. But i need them inthere incase I am not bear an open access point.
Ive searched the forum and found no relavent information. If I have missed it, please direct me to it... Thanks!
Just delete the connection. If you have a stock rom the connection will come back on its own after a restart. If on custom rom then just install an alltel carrier cab if you want it back.
So there isnt any way to keep the data and make it secondary? I go in and out of wifi coverage all day and it would be nice to have it connect to data if needed. thanks for the reply.
not that i know of
nodata utility. Lets you disable your data and just use wifi. Then when you want it back you just toggle it to enable. Worked good for me
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
i love how people are so quick to say "no, no & no"
then they get schooled from the autumnal equinox of 2006
nice application
i knew i had seen it before
but didn't have the linkopottamus
i love how people are so quick to say "no, no & no"
then they get schooled from the autumnal equinox of 2006
Click to expand...
Click to collapse
Lol, thanks for the info, i havent been here in a couple days, but I will try it out...
I had my internet setup to use wifi before i flashed my phone the last time, but when I deleted the data connection this time, it did not work..
I obviously did something else and I cant remember what it was. I found where I could "delete settings" for alltel even after I deleted the main connection. I think that did it..
Now after that I could connect to facebook app via wifi, but IE would not work.. For that I had to go in and change the way apps that need to connect to a private network to My ISP as well.
It just seems to me that there is an easy way to do this... Would also be nice to be able to tell and change whether a program is connecting automatically to the internet or private network. I wonder if that is a registry setting that can be changed..
I also just have removed the password from the data connection. Rarely, I mean rare, when I use data as I enabled WiFi first. If I really want to use data, I punch in the password.
There was also a real cool app I saw that I forgot to tag the thread. But it would do things based on the cell tower you were using. I thought it might have had controls for WiFi as well, it definitely did for ring setting.
How do I disable the phone from auto connecting to gprs? I tried testing it by launching opera without switching on wifi. The phone still connects through gprs although I turn data connection off. It will turn data connection on by itself. Even when I switch wifi on and want it to connect through wifi instead, it is still connecting through gprs. How do i solve this?
When wifi is "connected" (not only "on"), it uses wifi, no dataconnection.
If you really don't want a dataconnection, use something like NoData...
i tried NoData but it's not working. i'm using official htc wm6.5 rom.
Sorry I cannot be more precise because I don't use it anymore, but I remember there was an option to block data connection in HDTweak. Is that you want? Block dataconnection permanently? If so, you could alternatively delete your mobile operator connection in Settings/Connections. If anyone knows the registry changes involved in this,please post them so that I can make a .cab, I need it when roaming.
try MWLongLife! It's magic
this program is developed for saving battrey life by controlling 3G/2G network and data usage
you can set each program which need data access by 3G, WiFi, USB, etc.
Also, force to use Wifi rather than gprs if it's available.
Thanks for all of the suggestions. I tried installing nodata again and it worked this time.
for those interested there's also a cab to disable push internet completely (think that was the origin of your problem).
Search the forum on NoPushInternet
336663 said:
try MWLongLife! It's magic
this program is developed for saving battrey life by controlling 3G/2G network and data usage
you can set each program which need data access by 3G, WiFi, USB, etc.
Also, force to use Wifi rather than gprs if it's available.
Click to expand...
Click to collapse
Any link to this? didn't find anything around
sualc said:
Any link to this? didn't find anything around
Click to expand...
Click to collapse
Yes please... I was about to post the same issue. I think the precedence in WM6.5 of using mobile wireless over WiFi is the wrong way around if the WiFi signal is strong. In my house, my WiFi is strong everywhere but 3G comes and goes. It's darn annoying to get the message about "No connectivity" when I know for sure there is a very good WiFi signal.
Cheers, Rob.
PS. Just had it whilst writing this email - "Messages cannot be downloaded to your mobile device..."
It's "WM" not "MW".
http://www.freewarepocketpc.net/ppc-download-wmlonglife.html
That's much better!! thanks fighter7139, gonna try right now!
how can i do that my data connection stay alive when i standby the device?
(for example holding icq or fim working in standby)
i found something that does exactly this with WiFi but not with data connections...
http://forum.xda-developers.com/showthread.php?t=636656 in this thread the seventh app
When you say data connection do you mean Wifi?
To keep wifi you can use any register editor (SKTools for example). Then search for this entry "HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms".
When you've found it look for a key named "HTCKeepWifiOnWhenUnattended=0" and modify the 0 and type 1. It must be like this: HTCKeepWifiOnWhenUnattended=1
I did this way and it worked. Anyways if you are not sure how to do it you can search for a .cab "WiFi Stay Awake" that do the step above.
You must be aware that use this trick to enable wifi while staying in "stand by" drains your battery faster and depending how much you use your htc mega won't last for a day. Hope this help
no i dont mean wifi i mean the internet connection
on german its called "Datenverbindung" in english this would be data connection that why i wrote that
but i mean the internet (GPRS/EDGE/HSDPA)
the connection closes when i lock my phone and turn display off (standby i guess)
Oh, I looked at the 7th app and saw "7th cab - Makes ur WiFi stay awake when the phone get's locked , usefull when using Skype(or similar) or dont want to connect/disconnect/reconnect every time u leave it for a minute and it goes in standby". That's why I thought that.
I'm not sure then because I don't use data connection but maybe there is an entry like the "HTCKeepWifiOnWhenUnattended". Try to look @ it.
ok i searched but didn't found anything...
nobody any idea?..
Spacii said:
nobody any idea?..
Click to expand...
Click to collapse
Try these two applications.
these 2 tools are only to disable the GPRS/EDGE/3G connection...
i want some help keeping the connections alive when i turn of my phones screen....
still having this issue :/