Database Users

How to set wifi as default rather than GPRS?

Anyway?
if better , perm disable of GPRS will be good .

Try NoData to disble GPRS. Personally I'm not having much luck with it as my TD2 keep closing it down in background.
Alternative is to deliberately set an incorrect APN so it cannot connect even when it tries.
I don't know of any method of setting a default connection type.

NoData.cab works fine in my device, but HD Tweak can do the same job, so I removed it.

Would like to do the same too, and then have my weather and emails be updated via my home network thru wireless only...
any one able to do this?

Of course you can! Using 3g or any other paying data connection when WiFi is available is simply foolish

sualc said:
Of course you can! Using 3g or any other paying data connection when WiFi is available is simply foolish
Click to expand...
Click to collapse
Done spose you would like to tell me how please...i am not that clued in with the HTC device just yet...and have used alot of my data already...which i have to pay for...
Thanks..

With pleasure:
Some people say they can deactivate gprs,3g etc within windows..but as I emptied my sim credit within a minute when I first started my Topaz, I decided not to worry anymore by installing Modaco's NoData.cab (it's free,google for it) and disabling all costly data connections from my operator. After a few days I realized that nodata.cab was no longer needed because I had also HD Tweak, who can do the same.If you use it go to point 6. and disable the 3 last settings. So it's up to you:NoData.cab or Hd Tweak...and I'm sure even others utilities work aswell.

Or you simply delete the settings for 3g conections and the software will decide to use WIFI it's avaible instead 3G (because it will not work without settings.)

How do you do that? In this case you would have to do the network autoconfig again if you need 3g etc..anyway this discussion is funny because it is rare to find a thread with multiple solutions recently....I was getting bored of unsolved problems . Cheers !

sualc said:
With pleasure:
Some people say they can deactivate gprs,3g etc within windows..but as I emptied my sim credit within a minute when I first started my Topaz, I decided not to worry anymore by installing Modaco's NoData.cab (it's free,google for it) and disabling all costly data connections from my operator. After a few days I realized that nodata.cab was no longer needed because I had also HD Tweak, who can do the same.If you use it go to point 6. and disable the 3 last settings. So it's up to you:NoData.cab or Hd Tweak...and I'm sure even others utilities work aswell.
Click to expand...
Click to collapse
If you activate wifi the wm will use this
instead 3g. right know i post from td2
and i use wifi and the gsm it is still active bu not in use

Ok, and what steps did you take to achieve this?

sualc said:
Ok, and what steps did you take to achieve this?
Click to expand...
Click to collapse
i try it right know to be sure.
I have SPB monitor instaleted to verify the traffic.
If 3G it's active and you enable WIFI the application it will use 3G.
If the 3G it's close and open WIFI the application it will use WIFI and don't open 3G.

pauln said:
Or you simply delete the settings for 3g conections
Click to expand...
Click to collapse
So it's not about "deleting" anything, you're just using another application (costs USD$19.95). May be a solution

You understand me wrong.
First solution about deleting the connection was the simplest one if you want to use only WIFI.
Second : "I have SPB monitor instaleted to verify the traffic."
I use this app ONLY to verify and to be sure were the app goes to made traffic not for directing the app.
SPB Monitor tell you if you have one or more connections how much traffic you made...
and I see what I tell you if I have 3G closed and WIFI activated the traffic was made on WIFI and 3G remain closed.
But if you have 3G connected and start after that WIFI the 3G will made the traffic.

OK I understand, may I ask you again what are the steps for your first solution?

1. if you don't want to warry about 3G connection and you don't want to use it.
-"Connection setup/menu" disable auto configuration
-"Connections/manage existing connections" and delete all the connections
- enable WIFI and all the programs will use WIFI(will be the single way)
2. If you want to use 3G and WIFI
-when you use WIFI be sure/verify the 3G connection it's closed(click on the status bar-signal strenght icon and if it's active disable it)
-afterthat enable WIFI
Otherwise if 3G it's active will be the first option for applications to acces the internet.
Try to enable Autodisconect (ADV CONFIG or HDtweak) of data connection after you use it to disconnect automatically for you.
I hope I help you.

Solution 1 doesn't work here,wasted a couple of euros ..back to my good ooold system.

i still can't disable it, i just bomb $400 for activating gprs ..
new to WM phone , so ... kinda slow .

If you only want to use wireless all the time, try the following:
Go to Start | Settings | Connections
Click on Connections icon
Click on Advanced tab
Click on Select Networks button
Programs that automatically connect to Internet should use
My Work Network
Programs that automatically connect to a private network should use
My Work Network
Cheers to SEX1 on whirlpool...

XClemX said:
If you only want to use wireless all the time, try the following:
Go to Start | Settings | Connections
Click on Connections icon
Click on Advanced tab
Click on Select Networks button
Programs that automatically connect to Internet should use
My Work Network
Programs that automatically connect to a private network should use
My Work Network
Cheers to SEX1 on whirlpool...
Click to expand...
Click to collapse
Hi, will this solution also fix my issue? My issue being:
-No dataplan, but do not want do disable/delete 3g/gsm, because I still want to use it sporadically on the road, and recieve MMS. But only when I choose to manually.
-At the same time, I want the automatic updates of weather, push-email, stock and such, but ONLY when I'm in a known WLAN.
In simple terms, I want to deny the 3g/E/H from automatically connecting, without deleting them. At the same time, wifi should be allowed to automatically connect, and update selected services.
Is this possible?

How do you force WiFi connection ?

Reflashed my Jade from UK Orange to JADEMAN rom recently...
I don't think this is a ROm related problem (unless you know otherwise !) so I have posted in general part of forum.
Can anyone tell me how to force the phone to use Wifi to connect to the internet.
It connects via GPRS fine but i want to disable the GPRS DATA for travels abroad so I don't run up a huge data bill. I can stop the data with "NoData" app, but if I now try to connect to internet with Opera or Internet explorer if fails..
Is there something I am missing, to tell it either to connect via wifi before using GPRS data or to only connect via wifi. Do I need to create a connection ?
The create new connection page doesn't list using WiFi, bluetooth is the only "WIRELESS" type connection that appears to be offered.
Also when the wireless AP list is shown and I try to connect to an AP showing available that I have previously setup with WEP key etc, it fails to connect.
I am sure to be missing something but I can't spot what the problem is...
Any help appreciated.....
Phil

Normally Windows Mobile connects via WiFi first, if available, and only when not present it uses GPRS. That means that you do not need to disable GPRS if an WiFi-connection is established.
I have no personal experiences with "NoData". Perhaps someone else can help.

phil-w said:
Can anyone tell me how to force the phone to use Wifi to connect to the internet.
It connects via GPRS fine but i want to disable the GPRS DATA for travels abroad so I don't run up a huge data bill. I can stop the data with "NoData" app, but if I now try to connect to internet with Opera or Internet explorer if fails..
Is there something I am missing, to tell it either to connect via wifi before using GPRS data or to only connect via wifi. Do I need to create a connection ?
The create new connection page doesn't list using WiFi, bluetooth is the only "WIRELESS" type connection that appears to be offered.
Also when the wireless AP list is shown and I try to connect to an AP showing available that I have previously setup with WEP key etc, it fails to connect.
Any help appreciated.....
Phil
Click to expand...
Click to collapse
MvBoe said:
Normally Windows Mobile connects via WiFi first, if available, and only when not present it uses GPRS. That means that you do not need to disable GPRS if an WiFi-connection is established.
I have no personal experiences with "NoData". Perhaps someone else can help.
Click to expand...
Click to collapse
AFAIK the moment you invoke any app that requires internet connection (weather update, activesync, opera) Jade invokes data connection first (3G, GPRS, etc) That's how it works on my set. Unless you invoke Wi-Fi connection first, then data connection is ignored.

I have had a bad experience that even if all setups are ok Wi-Fi conn thru Ap fails.
Corrected such a way;
Under 'Wireless /Lan' settings
Power mode should be brought to 'best performance'

azahidi said:
AFAIK the moment you invoke any app that requires internet connection (weather update, activesync, opera) Jade invokes data connection first (3G, GPRS, etc) That's how it works on my set. Unless you invoke Wi-Fi connection first, then data connection is ignored.
Click to expand...
Click to collapse
That's what I meant: You have to activate WiFi by yourself to prevent jade using GPRS (etc.). Your description is more precise, I did not make it clear enough. Thanks for correction.

Hi and thanks for replies so far...
I have just done a hard reset to make sure I haven't loaded anything that may mess up the wifi connection... Even when wifi is on and I am connected to a wifi access point OK it still uses gprs/3g not wifi..
Back to the "drawing board" I think...
Any more ideas please...
Phil-w

with this app you can disable or enable data connections as you please.
there is another app here in the xda that will disable data when roming automatically, but i don't remember the name.

faria said:
with this app you can disable or enable data connections as you please.
there is another app here in the xda that will disable data when roming automatically, but i don't remember the name.
Click to expand...
Click to collapse
Hi faria
Unfortunately I find it better to go into connection manager, select airplane mode, then enable wifi. Then do any surfing, live messenger etc. Then once finished go back into connection manager, re-enable phone.
Like others, I'm on Orange, wifi no longer stays the internet source even if it is connected. I have it on all the time, but if I use the internet, I have to go through the above procedure or it costs me credit through Orange.
Janeway

janeway said:
Unfortunately I find it better to go into connection manager, select airplane mode, then enable wifi. Then do any surfing, live messenger etc. Then once finished go back into connection manager, re-enable phone.
Click to expand...
Click to collapse
The only disadvantage is here is that, you'll miss calls when there are incoming calls because your phone is inactive (while PDA is). You can just disable data connection (CommManager - Data Connection - off) and leave wi-fi connected.
Like others, I'm on Orange, wifi no longer stays the internet source even if it is connected. I have it on all the time, but if I use the internet, I have to go through the above procedure or it costs me credit through Orange.
Click to expand...
Click to collapse
Just wondering.. how you identify which connection is being used, wi-fi or 3G/GPRS when both are connected.
What if you disconnect data connection (3G/GPRS) without activating the airplane mode, can you surf using wi-fi connection.
One possible reason - set connected to the AP via wi-fi but AP is not connected to internet, thus set seeks 3G as another route to internet.

Hi azahidi, thanks for taking time to reply to me . Your points as follows:
Yes, missing calls is the disadvantage, but I use my pda more for data and hardly any calls, so not so important for me, but obviously we be much better if that were possible as I do sometimes forget to swich back. If I disable the data connection, it automatically re-initializes itself as soon as ANY data is being transmitted - even with just wifi active - except when it is in airplane mode. This is a new thing for me with the Jade, didn't have that problem before with my previous HTC phone.
There is an icon for the 3G - when its in use it shows it - it goes from being a large G in a square to a smaller one with signal bars.
Wifi is definitely connected, I surf online with it all the time.
Its like 3G has priority over wifi - there should be a way to change that.
Hope the above makes sense.
Janeway

I'ven been using 'Nodata' succesfull the last past months, it does it's job well, but i'm not on Orange as you are, that might be the difference.
Just to be sure i've also changed my settings:
start > settings > connections > connections > advanced > select network > My work network (twice).
and
start > settings > connections >advanced network > uncheck HSDPA and in SMS choose 'GSM'
(all is translated from Dutch, hope i used the right words)

Thanks Nirak.
One of my settings was wrong - I should have known that from last time, but my brain's elsewhere at the moment!
Must have upset it when I flashed
Cheers for now.

phil-w said:
Hi and thanks for replies so far...
I have just done a hard reset to make sure I haven't loaded anything that may mess up the wifi connection... Even when wifi is on and I am connected to a wifi access point OK it still uses gprs/3g not wifi..
Back to the "drawing board" I think...
Any more ideas please...
Phil-w
Click to expand...
Click to collapse
Phil, can't you simply switch the "Data Connection" on/off switch to 'off' ?
I have it in the Comm Manager right at the bottom. The Wi-Fi and Phone could be left 'on'. I can't try if it works because I only use the phone on 2G.
Joe

jfranek said:
Phil, can't you simply switch the "Data Connection" on/off switch to 'off' ? I have it in the Comm Manager right at the bottom. The Wi-Fi and Phone could be left 'on'. Joe
Click to expand...
Click to collapse
That's how it should work actually. Either one, Wi-Fi or 3g/GPRS. But what phil is saying is that it also activates data connection (3G/GPRS) even when wi-fi is connected.
On my set, and in my network (not Orange but standard GSM).. this is how it works :
The moment I invoke any application that requires internet connection (weather update, activesync, opera, etc) Jade invokes data connection first (3G, GPRS, etc). Unless if I invoke Wi-Fi connection on first, then data connection is ignored, it will stay off.
So what I normally do is, whenever I want to use internet, I connect using wi-fi then browse the internet. If there is no available AP, then I turn off wi-fi and continue browsing , which is then connected using 3G/GPRS/EDGE?HSDPA

azahidi said:
(...) The moment I invoke any application that requires internet connection (weather update, activesync, opera, etc) Jade invokes data connection first (3G, GPRS, etc). Unless if I invoke Wi-Fi connection on first, then data connection is ignored, it will stay off.
So what I normally do is, whenever I want to use internet, I connect using wi-fi then browse the internet. If there is no available AP, then I turn off wi-fi and continue browsing , which is then connected using 3G/GPRS/EDGE?HSDPA
Click to expand...
Click to collapse
This is the way it normally works and should work under WindowsMobile. The Orange-ROM seems to be "manipulated" by the provider (?) not to work in this desirable way. All (or some?) Orange-ROM-Handsets seem to activate the data connection (3G/GPRS) every time ignoring the established Wi-Fi-connection. This rises the providers business volume.

It would appear to be correct about orange having had the method of connection changed.
I have just found and installed a different RADIO.ROM to my Orange Touch 3G and now it appears to connect as required.
Still not 100pc happy but will post my observations later with the rom numbers if it helps anyone else out..
Phil-w

Look on the HTC JADE reflashing on this site
Hi All,
There is no way around the Orange apps to enable WiFi, but I successfully reflashed the Roms in my Orange touch 3g yesterday.
Have a look here for the details on what to do:
http://forum.xda-developers.com/showthread.php?t=514406
Follow the instructions carefully, and I chose to install the Stock HTC ROM 1.40.721.2 from the ROM post.
Wifi is then free....
)

Well I appear to have got around the Orange Unique problem.
I upgraded the Rom on my Orange UK Touch 3G to the Jademan SuperRom V3. That got rid of the Unique side of things but with no improvement with Wifi connectivity.
The connectivity problem with wifi still caused problems, the internet connection would NOT use wifi even if I disabled the GPRS / 3G data connection with "NoData" It just returned a message saying it had failed to connect.
I decided to find a new radio rom image which I managed to on this Jade forum. I flashed the new rom and tested the same connections again. This time the wifi connected via Wifi first and without any problem... It would appear that flashing the Jademan rom didn't update the radio as well, I needed to update the radio as well.
The clue may be in the radio rom version number,
Original orange 0.29.30.U23
New Radio rom 0.41.30.12
A assume that the U in the orange rom refers to "Unique", which now I have replaced it, it appears to have cured the wifi problem and it is working just as any other Non-Orange Jade / Touch 3G does....
I have not noticed any problems with any other radio related issues since the upgrade, GPS, 3G/GPRS etc all seem to be fine.
I do find that the phone does struggle to connect with some Dlink AP's though... It may be a problem with the Dlink more than the phone but I still need to do more tests on that.
May be that will help a few other people out there...
Phil-w

Hi Phil,
I had exactly the same problem!
Started with an unlocked HTC Touch 3G with Orange customised ROM and then replaced it with the SuperROM. WiFi was unusable so (having read your post) I re-flashed with the standard ROM released from HTC and then re-flashed the SuperROM. This gave me the same Radio ROM that you show above however the WiFi problems seemed to be no better.
While I liked the idea of having the SuperROM I have gone back to the latest standard HTC ROM and all seems to be well.
John

Hi John,
My wifi now seems fine except not liking Dlink AP's for some reason.
I don't even need to stop gprs data with NoData etc, if there is a wifi connection available that I have setup previously it will use that rather than GPRS..
I appear to have "de-Oranged" it !!!
What probs do you still have on your Touch 3G ??
Phil

How to make wifi the default option to connect instead of gprs?

How do I disable the phone from auto connecting to gprs? I tried testing it by launching opera without switching on wifi. The phone still connects through gprs although I turn data connection off. It will turn data connection on by itself. Even when I switch wifi on and want it to connect through wifi instead, it is still connecting through gprs. How do i solve this?

When wifi is "connected" (not only "on"), it uses wifi, no dataconnection.
If you really don't want a dataconnection, use something like NoData...

i tried NoData but it's not working. i'm using official htc wm6.5 rom.

Sorry I cannot be more precise because I don't use it anymore, but I remember there was an option to block data connection in HDTweak. Is that you want? Block dataconnection permanently? If so, you could alternatively delete your mobile operator connection in Settings/Connections. If anyone knows the registry changes involved in this,please post them so that I can make a .cab, I need it when roaming.

try MWLongLife! It's magic
this program is developed for saving battrey life by controlling 3G/2G network and data usage
you can set each program which need data access by 3G, WiFi, USB, etc.
Also, force to use Wifi rather than gprs if it's available.

Thanks for all of the suggestions. I tried installing nodata again and it worked this time.

for those interested there's also a cab to disable push internet completely (think that was the origin of your problem).
Search the forum on NoPushInternet

336663 said:
try MWLongLife! It's magic
this program is developed for saving battrey life by controlling 3G/2G network and data usage
you can set each program which need data access by 3G, WiFi, USB, etc.
Also, force to use Wifi rather than gprs if it's available.
Click to expand...
Click to collapse
Any link to this? didn't find anything around

sualc said:
Any link to this? didn't find anything around
Click to expand...
Click to collapse
Yes please... I was about to post the same issue. I think the precedence in WM6.5 of using mobile wireless over WiFi is the wrong way around if the WiFi signal is strong. In my house, my WiFi is strong everywhere but 3G comes and goes. It's darn annoying to get the message about "No connectivity" when I know for sure there is a very good WiFi signal.
Cheers, Rob.
PS. Just had it whilst writing this email - "Messages cannot be downloaded to your mobile device..."

It's "WM" not "MW".
http://www.freewarepocketpc.net/ppc-download-wmlonglife.html

That's much better!! thanks fighter7139, gonna try right now!

setting connection preference ???

is there a way to make sure the phone only connects to my home wi fi hub when at home and does not connect via my 3g vodafone connection. I want it to automatically select the fastest link and not waste my 3g allowance ? I've searched but cannot find a solution, thanks

+1 good idea, anyone got anything on this?

Andi,
The solution I would use would be to go to Settings>Wireless Controls and simply switch Data Connections off, Wifi On when at home.
You would have to remember to to reverse this when done if you want to access 3G services.
WB

u could use G-Profile.. It allows you to set up different profiles and switch them automatically based on your current cell id. Wifi on/3G off when at home, other way around when not. Works like a charm for me

thanks for the tip but when I do that it then automatically turns it back on even when I'm connected to the wireless hub, all of a sudden they both are on . . . . . . .?? any ideas ??

i have the same problem... it keeps using my 3G/EDGE network even if WIFI is available... and i dont get it how can HTC afford not to give us an option to set that the phone asks you for permission when connecting to 3G/EDGE network... this **** costs and im not really happy about the fact that my phone can connect to a network whenever it feels like.
(and yes this **** keeps happening even tho i disabled automatic updates in weather/time applications.)

In BSB tweaks if you press options I think there is an option to disable all data connections. I have never tried it but maybe it will override all connection attempt? Give it a try. Also, I flashed to the 2.01 ROM and I think the data connections are a little less persistent, though I don't wan't to guarantee anything!

andi1977dog said:
is there a way to make sure the phone only connects to my home wi fi hub when at home and does not connect via my 3g vodafone connection. I want it to automatically select the fastest link and not waste my 3g allowance ? I've searched but cannot find a solution, thanks
Click to expand...
Click to collapse
does it not do that by default? i cant send emails through t-email when i'm at home - I just presumed this was because i was connected through my wireless router. turning off wifi allows me to send emails.
thus I presumed wifi takes preference?

I am wondering the same thing. The idealist situation would be to have both connections active at the same time, and let the HD2 make sure that wifi is used when the connection is there. Is there some kind of application to verify which connection is being used?

Great thread - I am not the only HD2 owner who is annoyed with the problem with the HD2 switching on its GRPS data connection without my approval!!!
Could it be that the HD2 turns off the wifi when it goes to sleep and then tries to connect to the web using the GPRS network? In that case how do I prevent turning off WIFI when in sleepmode?
I read somewhere else in this forum about a G-profile. Being a newbie with HTC I have no idea what this is. Any clue?
But overall: Yes, it would be great if HTC added an option to set network connection preferences.

WiFi does take preference if it's connected! Dont forget when you are at home and you turn your phone on from standby it will take 10sec or so to connect to your WiFi router, if you try and use IE, Opera, Twitter, Weather Update, Email, etc... before it's connected it will fire up your 3G data connection!
The phone does not how ever turn off your data conn when it's idle which is annoying! You need to use Bandswitch or CommManager from here http://www.commmgrpro.com/jsp/main_frame.jsf;jsessionid=103F335931311F019BD540B82E479383 or WMLonglife from this forum (do a search).

there must be someone out there with ghe know how and expertise to solve this ?? glad to see its an issue for othet folk, i like the idea for selecting wi fi over gprs if its there to be selected.......

I found out that my HD2 automatically closes the 3G connection when I have wifi active. I'm not sure why it does that, I know pretty sure that it had not always done that. But I'm quite happy with it
It turns 3G on again after disconnecting from WIFI, which is what I want.

so if you tap the notifications tab and the "contratc internet" is counting and the wi fii is connected it is using the wifi and not the "contract internet" even though the timer is counting ???
Can anyone confirm ???
p.s tried using the G-Profile software, it seems very inconsistant and didnt always turn off what it should when you select the profile so im going to unistall it.

for some reason the automatic internet settings from vodafone messes up/hides the "The Internet" or "MyISP" connection that is in the phone originally.. I even hard resetted but you just can't seem to stop the automatic settings..
disable the proxy of the "Vodafone live!" connection and it will work.. just like twitter etc..
the same with email only checking through 3G and not wifi.. but set the server settings of your account to "The Internet" after you disabled the proxy.. (advanced settings at the smpt server tab)
hope this helps.. but a thing worries me, as I don't know anything about proxies, why does vodafone specify a proxy if we don't realy need one.. to port us over their live portal or something? (on my old sony ericsson the track ID service didn't work because of that)

"disable the proxy of the "Vodafone live!" connection and it will work.. just like twitter etc.."
thanks but how do i do this ??

anyone know how i do this ? thanks

After including the Taskmanager as a quick link in HTC Sense I am now able to close all programs. Now I do no longer experience any unfortunate GPRS connections when connected to WIFI.
Only problem is that when running on batteries the WIFI connection is closed down when the unit enters sleepmode. However during sleepmode, if I have not closed down programs accessing the web these are now able to connect to the web by using the GPRS connection.
Why on Earth has HTS decided to decipher a click on the X as MINIMIZE and not CLOSE!!!

tnyborg said:
After including the Taskmanager as a quick link in HTC Sense I am now able to close all programs. Now I do no longer experience any unfortunate GPRS connections when connected to WIFI.
Only problem is that when running on batteries the WIFI connection is closed down when the unit enters sleepmode. However during sleepmode, if I have not closed down programs accessing the web these are now able to connect to the web by using the GPRS connection.
Why on Earth has HTS decided to decipher a click on the X as MINIMIZE and not CLOSE!!!
Click to expand...
Click to collapse
I believe my Wifi connection is kept alive, even in sleepmode.

Josan123 said:
I believe my Wifi connection is kept alive, even in sleepmode.
Click to expand...
Click to collapse
Sorry, forgot to mention this - but in order to save battery power I have asked the unit to close down the WIFI when in sleepmode (using BsB Tweaks). And indeed it gives me more battery life.

Updates & Email using WiFi only?

Hey all,
I'm on my 3rd htc device and I should have asked this question ages ago!
With things like weather updates and emails is it possible to have them automatically update and download when I'm using WiFi without it trying to open a gprs connection at all other times?

I would also be interested because coming from a symbian phone I really dont like that the phone does not ask me which access point I want to use and that gprs connection is the primary one to use on win mo phone. Nokia is better for me from this point of view, you have to choose which access point to use and there is no way you surf on the net thinking you are on wifi while in reality you are using gprs.

As a former Symbian user, I must agree. 1 point for Symbian, and inexcusably lame for Windows Mobile. Let's hope that this is something that can be worked out in an update to 6.5.x while we wait....and wait.... and wait for WP7.

dan_t said:
With things like weather updates and emails is it possible to have them automatically update and download when I'm using WiFi without it trying to open a gprs connection at all other times?
Click to expand...
Click to collapse
No, there's no way to force wifi. If wifi is connected it will use it, but if it hits the time where it's set to autoupdate, and no wifi is available, it will connect to gprs.

but... if you are in a WiFI area, but without data service, you are SOL, because it won't use the WiFi for the status updates, email, etc.
Pretty dumb, really.

use bsb tweak to disable all mobile data connections or use nodata program... then it wont be able to try to connect while its not on wifi... but u wont be able to use data connections either unless u enable them again

Of course it does use wifi if it's connected and no other connection is present... I'm doing that every day!
When I arrive home I turn on wifi, disconnect data if it was connected, and I can do all I want, it will use wifi and not try to connect data.

is there a way to auto-download once wifi or data connection is detected? my carrier charges me bigtime for every connection access and not by the minute oe data use.. so I just want everything to update automatically in 1 access without manually doing so for each..

kilrah said:
Of course it does use wifi if it's connected and no other connection is present... I'm doing that every day!
When I arrive home I turn on wifi, disconnect data if it was connected, and I can do all I want, it will use wifi and not try to connect data.
Click to expand...
Click to collapse
If disable my data connection, and enable WiFI, and then choose the Weather tab and Update Now... nothing happens. It tries... it fails. Always has on every ROM I've used.
Does it not do this for you, for example?
If I reverse the process.... enable my data connection and disable WiFI.... choose Weather tab, and Update Now.... it works!
Why should such an integral part of the Homescreen UI be utterly and completely dependent on a data connection?
That's something I do not understand.

its working fine over wifi if i turn off data connection for me

Lake292 said:
its working fine over wifi if i turn off data connection for me
Click to expand...
Click to collapse
You follow those steps, and it will update?
Any idea why it never has for me?
I've used
1.48 WWE (Stock)
1.66 WWE (Stock)
Dutty's HG v.08
Dutty's HG v.09
and it has never worked for me one time in this way.

donalgodon said:
If disable my data connection, and enable WiFI, and then choose the Weather tab and Update Now... nothing happens. It tries... it fails. Always has on every ROM I've used.
Does it not do this for you, for example?
Click to expand...
Click to collapse
No, if I do that it works perfectly.
I'd say you have a connectivity problem with your Wifi.. does it work to browse then net in Opera? Wouldn't you use a proxy by any chance?

that's sometimes a problem of synchronization of your wifi router and your device (e.g. dhcp or timeout reconnect of your wifi router)
try this:
switch on router and then wifi on your device.
then start quickgps and try to update.if it fails, then try again quickgps.
if it works on second time then it's because of this synchronization...but update weather should work now by wifi.

kilrah said:
No, if I do that it works perfectly.
I'd say you have a connectivity problem with your Wifi.. does it work to browse then net in Opera? Wouldn't you use a proxy by any chance?
Click to expand...
Click to collapse
Opera and every other connection works. I think it has something to do with my location. It could be that my ISP or my service provider is part of the problem.

Oh one thing I forgot:
In wifi options, advanced, network cards, network cards tab, make sure it's set that your network card connects to the Internet, not Work.
That could be it.