Database Users

Is there a way to force WiFi only?

I have free unlimited data for a few months, but when it is over I would like my phone to never connect to the internet through the carrier unless I specifically tell it to (Prefer to use the WiFi feature). Is there a setting, registry hack or other way that I can do this. I appologize if this is not a mogul specific question, I just figured it would be hardware specific.

yeah, there are a few free programs i've found on on xda that allow you to disable the gprs, etc... then all you have to do flick on your wifi switch and you're good to go.
I've attached a copy of the program that i personally use. I found it on this site but i don't have a clue what thread it was....
what i've done is after installing the program i set the "voice dail" button on my phone to activate the NoData program instead. Then i can easily toggle off the services i wish to use.... keeping them turned off also increases your battery life tremendously

Thanks for the reply. I tried that app, the connection that came up was CDMA1X so I disbled it, and then went to internet explorer it still browsed the web without a wifi connection, so I assume this didn't work.

Do you have sprint? If so, I'm not sure why you're phone would have a different setup than mine. When using that program i have two listings come up: 1. Phone as Modem, 2. Sprint PCS.
If i disable both i get only wifi.
thanks

I have Telus in Canada.

jjlwork said:
I have Telus in Canada.
Click to expand...
Click to collapse
ok i just played around with my phone a little more and have one other idea.
begin by tapping: start>settings>connections tab>connections>manage existing connections
select one of the options in the list and then tap the "proxy settings" tab.
uncheck the box "This network connects to the internet".
Repeat for each connection.
Hopefully this will solve your problem

I tried that too, unfortunately when I close the connections settings and go back in the check mark is back.

Hi, I'm not sure if you have solved this problem already but, somehow I did. I went to manage existing connections and assign a username and password . So now whenever, it tries to connect on the dial up (cdma1x), it prompts for a password, just press "cancel". I also have some programs for different home screens and contacts manager if you're interested.

YAY! YAY! YAY! YAY! YAY! This program has allowed me to kill all apps from using the data connection which lets USB Modem actually WORK on my Mogul! THANK YOU! THANK YOU! THANK YOU! THANK YOU! THANK YOU!

Automatic connections (Wifi/3G)

Hi everyone!
I've had PDA phones since a couple of years now, and I've always been searching for something.
Here is my problem:
When the phone needs an internet connection, windows mobile automaticaly tries to connect with the 3G connection.. As I don't have an unlimmited 3G connection, it's very annoying..! That's why I have to manually turn the Wifi "ON"
What I am searching for
I'd like a very intuitive and simple software that ask (with a popup for example) which connection to use (Wifi/3G) when the phone needs the internet.
Hope you understood what i'm searching for..!

While not a solution NoData might help part of your problem in the interim.
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility/
It will at least let you disable 3G/GPRS when you need to so you don't go over.

Thanks for the answer, i know this solution.. But that's not really what i'm searching for..!

Maybe You can create a fake connection for 3G so the phone doesn't get to connect? Just an idea, haven't tried. It still leaves the WiFi problem - why there isn't an option to select which connection to use if one is needed...

depending on what rom you have im sure comm manager has buttons for wife and data connection, with basic on off control for each.
However Id have thought someone could write something which would switch between data connection enable and wifi disabled (when out and about) and the other way around when you have wifi available and dont want to use up your 3g allowance.

I don't think it's that easy
that Comm part is build into WM, so the developer would need to write a new shell that acts as internet and gives you the option of selecting the connection..
I do like the idea though

hmmm,
is perhaps feasible with Mortscript?
In which one intercepts the “Internet” call and then by Popup the choice would have?

HTC Weather using Wifi ???

Hi,
I did search the whole forum for answers but in vain. Whenever I access weather tab and update the info, it updates using 3G/HSDPA.
But, what I want is to update using wifi at home. Is there an option to make it use wifi instead of 3G/HSDPA?
Pls lemme know coz it wud help me save a few penny
TIA
SK

Well I did the following.
1) As I don't want any applications (in background or by request) to update via any Phone Network I deleted the internet setting.
Now I can connect via USB or Wifi and then download, both work.
If I do it when I am not connected then I get an error message (as I have no internet connection setup).
So this works for me but also means I have to remake a internet connection if and when I want to download of phone network.
I have no flat rate data plan so its my only choice, maybe others have a better idea.

really strange, mine uses wifi and if there is no wifi, it relies on gprs.

cx2k5 said:
really strange, mine uses wifi and if there is no wifi, it relies on gprs.
Click to expand...
Click to collapse
Which is correct as far as I can see.
The issue here seems to be he does not want to download via gprs and I have yet to find an option that allows you to turn it off.
The choices are Download automatically
Download weather when roaming
What is missing is that stops you downloading via GPRS but allows you to download via WIFI and when connected.

Problem
cx2k5 said:
really strange, mine uses wifi and if there is no wifi, it relies on gprs.
Click to expand...
Click to collapse
Thanks 2 all for ur reply
Actually the problem is:
I have router at home and my touch hd connects to wifi to update mails, etc.. But when I switch to weather and update, it somehow doesnt identify the wifi connection. Instead uses 3G for updating...is it happening only in my mobile?
And I guess nodata might just work...lemme chk that out ....Thanks a ton

Mine too used to use what it wanted, hspda as first choice. So i deleted the 3g configuration. From what i have read, it is a WM problem: no way to set 3G as secondary choice

bbonzz said:
Mine too used to use what it wanted, hspda as first choice. So i deleted the 3g configuration. From what i have read, it is a WM problem: no way to set 3G as secondary choice
Click to expand...
Click to collapse
oh i c...pls tell me how u deleted the 3g config and then did that take wifi for updating after doing so???

sriramkrishnan06 said:
oh i c...pls tell me how u deleted the 3g config and then did that take wifi for updating after doing so???
Click to expand...
Click to collapse
start->settings->connections->connections
here you see (don't know how exactely in english, since i have italian)
internet (???)
work
under internet, "modify"
enter there, and delete your 3G account.
Now back in connections, go advanced->select (net???) [the first button over composition rules]
Here select "work" for everything.
Now, without 3G, the phone connects to internet only if you have an active wifi, otherways doesn't connect.

Wouldnt it just be easier to use the HD tweak utility to disable internet access via 3G/GPRS/HSDPA? - just a thought guys, instead of deleting settings which may be required at a later time (i.e. when no WIFI is available)
My weather updates fine via WIFI,
My emails (using a hotmail account) keep trying to update via 3G though - I can't get it to do it via WIFI unless I use Windows Live to login then update emails

Would, but as you see there are problems (and i suspect hd tweak kills also mms's, since excludes all data connections). Instead, deleting the account, is easier. I can always reinstall it with the connection wizard.

try this: disable or delete your gprs connection, enable wifi and try to download weather data. if successful, then re-enable your gprs connection and see if it still prefers to use gprs or wifi at first place.

Use modaco NoData to make sure the 3g connection is never used.

Done
Thanx a ton for ur help...I used Nodata and my work was done...sweet and simple...
Thanx

I have a similar problem, just wanted to open a topic about it
Unfortunate, weather is not updating any more, no Wifi, no 3G.
I do not mind it using 3G, but it's not updatingf, nothing works.
I am not even sure how to delete the default 3g connections.
i will try .. i hope i will not have to hard reset the phone again

Ummm... u bought £500 phone and yet can't afford a 50kb 3G/GPRS bandwidth per month?!
Quite intriguing
@zoomee
To make email use WIFI and 3G as a fallback, in email account settings change connection to "The Internet" (it's probably set to your 3G Access point e.g. "T-mobile internet")

Maybe your settings are wrong. Does QuickGPS work? If it doesn't, then check your settings. With some access points of some operators, you can only browse internet pages but not use other apps requiring internet access.
@sriramkrishnan06: no problem

I am affording a 3g Connection and Bandwidth (if that was pointed at me).
I can not get any more weather data (
I deleted as explained here some of the previous set connections to my 3g provider and also rebuild one, and still nothind
throguth Wifi it seems not to work, but through 3g, not any more
it was working before, i had to hard reset it and now it does not work any more

I think it was pointed to sriramkrishnan06.
Anyway, have you checked whether QuickGPS works or not?

The Quick GPRS works form me, Weather still does not work
I am little upset since i know i am missing something small. I am not THE thech savvy guy, but i know my whay arroud computers, (i am a web developer) still, somehow i am not able to make the damn weather work, even tried one of the "hacks" witht e weather database editoer, to load the default server, it is still not working for me.
If anyone has an idea .. please ..

If Quick GPS works then I have no idea. Are you sure you didn't mess up anything using that tool?
In any case, hard resets almost always work. If you don't want to, you could do a full backup with Resco Backup or similar, hard reset, test the weather, then restore the backup.

How to set wifi as default rather than GPRS?

Anyway?
if better , perm disable of GPRS will be good .

Try NoData to disble GPRS. Personally I'm not having much luck with it as my TD2 keep closing it down in background.
Alternative is to deliberately set an incorrect APN so it cannot connect even when it tries.
I don't know of any method of setting a default connection type.

NoData.cab works fine in my device, but HD Tweak can do the same job, so I removed it.

Would like to do the same too, and then have my weather and emails be updated via my home network thru wireless only...
any one able to do this?

Of course you can! Using 3g or any other paying data connection when WiFi is available is simply foolish

sualc said:
Of course you can! Using 3g or any other paying data connection when WiFi is available is simply foolish
Click to expand...
Click to collapse
Done spose you would like to tell me how please...i am not that clued in with the HTC device just yet...and have used alot of my data already...which i have to pay for...
Thanks..

With pleasure:
Some people say they can deactivate gprs,3g etc within windows..but as I emptied my sim credit within a minute when I first started my Topaz, I decided not to worry anymore by installing Modaco's NoData.cab (it's free,google for it) and disabling all costly data connections from my operator. After a few days I realized that nodata.cab was no longer needed because I had also HD Tweak, who can do the same.If you use it go to point 6. and disable the 3 last settings. So it's up to you:NoData.cab or Hd Tweak...and I'm sure even others utilities work aswell.

Or you simply delete the settings for 3g conections and the software will decide to use WIFI it's avaible instead 3G (because it will not work without settings.)

How do you do that? In this case you would have to do the network autoconfig again if you need 3g etc..anyway this discussion is funny because it is rare to find a thread with multiple solutions recently....I was getting bored of unsolved problems . Cheers !

sualc said:
With pleasure:
Some people say they can deactivate gprs,3g etc within windows..but as I emptied my sim credit within a minute when I first started my Topaz, I decided not to worry anymore by installing Modaco's NoData.cab (it's free,google for it) and disabling all costly data connections from my operator. After a few days I realized that nodata.cab was no longer needed because I had also HD Tweak, who can do the same.If you use it go to point 6. and disable the 3 last settings. So it's up to you:NoData.cab or Hd Tweak...and I'm sure even others utilities work aswell.
Click to expand...
Click to collapse
If you activate wifi the wm will use this
instead 3g. right know i post from td2
and i use wifi and the gsm it is still active bu not in use

Ok, and what steps did you take to achieve this?

sualc said:
Ok, and what steps did you take to achieve this?
Click to expand...
Click to collapse
i try it right know to be sure.
I have SPB monitor instaleted to verify the traffic.
If 3G it's active and you enable WIFI the application it will use 3G.
If the 3G it's close and open WIFI the application it will use WIFI and don't open 3G.

pauln said:
Or you simply delete the settings for 3g conections
Click to expand...
Click to collapse
So it's not about "deleting" anything, you're just using another application (costs USD$19.95). May be a solution

You understand me wrong.
First solution about deleting the connection was the simplest one if you want to use only WIFI.
Second : "I have SPB monitor instaleted to verify the traffic."
I use this app ONLY to verify and to be sure were the app goes to made traffic not for directing the app.
SPB Monitor tell you if you have one or more connections how much traffic you made...
and I see what I tell you if I have 3G closed and WIFI activated the traffic was made on WIFI and 3G remain closed.
But if you have 3G connected and start after that WIFI the 3G will made the traffic.

OK I understand, may I ask you again what are the steps for your first solution?

1. if you don't want to warry about 3G connection and you don't want to use it.
-"Connection setup/menu" disable auto configuration
-"Connections/manage existing connections" and delete all the connections
- enable WIFI and all the programs will use WIFI(will be the single way)
2. If you want to use 3G and WIFI
-when you use WIFI be sure/verify the 3G connection it's closed(click on the status bar-signal strenght icon and if it's active disable it)
-afterthat enable WIFI
Otherwise if 3G it's active will be the first option for applications to acces the internet.
Try to enable Autodisconect (ADV CONFIG or HDtweak) of data connection after you use it to disconnect automatically for you.
I hope I help you.

Solution 1 doesn't work here,wasted a couple of euros ..back to my good ooold system.

i still can't disable it, i just bomb $400 for activating gprs ..
new to WM phone , so ... kinda slow .

If you only want to use wireless all the time, try the following:
Go to Start | Settings | Connections
Click on Connections icon
Click on Advanced tab
Click on Select Networks button
Programs that automatically connect to Internet should use
My Work Network
Programs that automatically connect to a private network should use
My Work Network
Cheers to SEX1 on whirlpool...

XClemX said:
If you only want to use wireless all the time, try the following:
Go to Start | Settings | Connections
Click on Connections icon
Click on Advanced tab
Click on Select Networks button
Programs that automatically connect to Internet should use
My Work Network
Programs that automatically connect to a private network should use
My Work Network
Cheers to SEX1 on whirlpool...
Click to expand...
Click to collapse
Hi, will this solution also fix my issue? My issue being:
-No dataplan, but do not want do disable/delete 3g/gsm, because I still want to use it sporadically on the road, and recieve MMS. But only when I choose to manually.
-At the same time, I want the automatic updates of weather, push-email, stock and such, but ONLY when I'm in a known WLAN.
In simple terms, I want to deny the 3g/E/H from automatically connecting, without deleting them. At the same time, wifi should be allowed to automatically connect, and update selected services.
Is this possible?

Wifi & Data Connection

Hi,
Anyone know if there is any setting that disables data connection automatically switch on?
I find it quite annoying at some point, i was using wifi to surf the net as well as having window live messenger on. But once i dc-ed from wifi (it auto reconnect back to access point) and the data connection automatically switch on (cost money for data connection), which i don't want it to happen.
Please assist, thank you.

seriously bro...............
use the search feature
you can find it on top. In "search by keywords" type "data connection"
select "search titles only"
in the forum list select blackstone {i presume you have blackstone}
hit search
click on the post closest to your issue
tada
read................
if you still can't find any solution to your problem then post your question

Souma said:
Hi,
Anyone know if there is any setting that disables data connection automatically switch on?
I find it quite annoying at some point, i was using wifi to surf the net as well as having window live messenger on. But once i dc-ed from wifi (it auto reconnect back to access point) and the data connection automatically switch on (cost money for data connection), which i don't want it to happen.
Please assist, thank you.
Click to expand...
Click to collapse
You can also download HD Tweak it allows you to do this, also check what your email etc settings are as It shouldnt connect unless it needs to

Opps~! my bad fellow gurus
I guess the search sure is useful.
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
Good day gentlemen!

Automatically?
I'm very lazy so is there a solution to automatically block the data-connection while using wifi?
Or maybe you can tell me how to detect wifi being turned on so i can write my own program...
Thanks