Related
As a new O2 xda exec user, I thought I should play safe and upgrade to latest ROM etc on the O2 web site. After a couple of false starts and after checking the excellent wiki advice, I got the thing to run through and complete the upgrade.
But on doing the final hard reset, I find myself with a completely garbled screen instead of the O2 splash screen. After a couple of seconds the 3 lines of text appear on the screen (the R, G and D numbers) but against the background 'snow' I can't read them. No response to keyboard or to 'random' pressing the screen. The screen eventually turns off after a few minutes but when switched back on remains with the same garbled screen as before.
Tried going through the whole process again but sadly got the same result.
Tried going into bootloader and doing a soft reset (as advised one of the many upgrade problem threads I've checked) but that also took me to the same garbled screen.
Can anyone help me out with this? I can't find anything quite like this on the Wiki or in any recent threads.
Should I try an alternative ROM? Stupid question, but is a Jasjar ROM OK on an O2 exec?
Hi - just thought I'd save people any wasted effort. This problem is now sorted.
It seems the O2 web site had linked to an out of date ROM which I downloaded and installed in blissful ignorance. Went back to the web site and found the link is now updated and gives the correct ROM version. This loaded and started up with no problems.
In case anyone reads this - although I didn't get any direct responses from the community I would still like to say a big thanks cos the Wiki and the responses to other threads are a real help. You guys have put a lot of effort into this and created a resource which is invaluable.
Top bananas!
lol...well i guess me and u were in the same boat my dude...i def did exactly da same thing u did..jus a new user getting the update and fu**ed my ish up...thanx 4 posting this tho it was some help*goes to download new update*
I cant even sync with my pc anymore i dont know wat to do
I'm no expert - as the screw up above amply demonstrates - but the failure to sync was one of the rage inducing steps I went thru too. Sometimes the PC would recognise the xda but other times it wouldn't. In my case, it was sorted by reading in another part of the forum how to get into bootloader mode by pressing the light and on/off button at the same time as using the stylus to press the soft reset. This should take you into boot loader - an apparently dead screen but if you look closely you should see 'Serial' at the top and 'v0.xx' at the bottom.
If you reconnect by USB cable to your PC the 'Serial' should change to 'USB' and in my case I was able to run the software on my PC to update the ROM.
Sorry if I'm stating the obvious but hope this works for you. Otherwise check out the Wiki section (wiki.xda-developers.com) which has lots of good tips.
i fixed it i had jus installed a new rom
http://forum.xda-developers.com/showthread.php?t=305225
I am trying to follow this tutorial but the links for the button rom and lokiwiz dont work can anyone link me one that works?
Thanks
read the 'read first' sticky in the wizard upgrading forum, everything is in there
That would be great advice if those links worked. But they don't work for me. Actually the problem I am having is identical to wind_sun's post in March. I will just copy and paste as I dont know if I could word it better. And it goes a lil something like this:
Dr. P:
I have been doing the unlocking SIM and CID for several rounds and no luck so far. So I am thinking that I would put up a message here for helps from you and others. Here is the related info:
tmobile USA MDA
IPL /SPL 2.26
GSM 02.25.11
OS 2.26.10.2
I downloaded CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE and extracted into a folder and start the downgrade process by double click ROMUpdateUtility_Wizard_NoID since it is G3 with 2.XX ROM.
The verify screen reads:
From:
Model ID: WIZARD
Image Version: 1.2.0.0
Language: ENGLISH
To:
Model ID: Prodigy
Image version:
Language: WWE
Everything goes smooth until I get to 98% done. The tool complained:
ERROR[302]: UPDATE ERROR (My situation is different in the computer goes to 100% then states it has to close for some problem. It prompts me to send or don't send to Microsoft. The phone remains at 98%)
and ask me to recover by disconnecting usb cable and taking out battery, which I did.
After I put back battery, the MDA screen comes back with 3 color bootloader display. The screen still show IPL/SPL 2.26 version at this time. I did see USB on the left bottom of the screen when I reconnect USB cable.
Then follow the instruction to rerun the ROMUpdateUtility_Wizard_NoID on PC.
It errored out at the 98% AGAIN and shows me the SAME error messages.
Repeat the process and it always errored out at the same point with the same error message.
Of course I was able to rescue my MDA by reflashing it with the T-Mobile 2.26 ROM with no problem.
But I still want to downgrade so that I can unlock and upgrade. There was no reply to this thread by wind_sun. A lil help? Thanks in advance.
Babyexp said:
That would be great advice if those links worked. But they don't work for me.
Click to expand...
Click to collapse
I just checked this thread and all the links work
are you saying that you can't flash the button rom?
BBOBECKYJ,
Exactly. Exactly as stated above. I am having the same problem wind_sun had. Hangs at 98%. Thanks again.
Babyexp said:
Exactly. Exactly as stated above. I am having the same problem wind_sun had. Hangs at 98%. Thanks again.
Click to expand...
Click to collapse
I've not read the thread - i didn't need to, I followed the instructions exactly and it worked
I'm confused about what you're saying, firstly that the links to the roms didn't work, (so i gave you those links). Now it seems you are saying that the roms won't flash yet you also say you still can't download those same roms
i believe the guide i linked (not the one you were using) is foolproof, and if you follow each step exactly you can't go wrong.
also if you're having problems, you should post in that thread and not create a new thread - as it is monitored by the thread creator who may be able to help you.
I am having the same problem wind_sun had
Click to expand...
Click to collapse
so what was the response to that problem? (if any) does that not solve yours?
First, I apologize. I do not post often. The result is my forum etiquette is poor. This thread belonged to someone else. Initially, I was backing them up in stating that the first reply to this thread was incorrect and was not valid at the time of the posting. I knew this as I had tried those same links in the past 24 hours. My mistake was stating my problem in this thread in the same post obviously. That was poor mannered in hindsight. Second, being that I do not post to forums often I forget how excruciatingly detailed a post or thread has to be. Everyone is not always on my frequency. Even so, with matters of the technical sort, people probe and ask questions. In the future, I will try to do better.
Babyexp said:
First, I apologize. I do not post often. The result is my forum etiquette is poor. This thread belonged to someone else. Initially, I was backing them up in stating that the first reply to this thread was incorrect and was not valid at the time of the posting. I knew this as I had tried those same links in the past 24 hours. My mistake was stating my problem in this thread in the same post obviously. That was poor mannered in hindsight. Second, being that I do not post to forums often I forget how excruciatingly detailed a post or thread has to be. Everyone is not always on my frequency. Even so, with matters of the technical sort, people probe and ask questions. In the future, I will try to do better.
Click to expand...
Click to collapse
LOL i didn't notice that the third post - yours - was not the same person as post one, that explains my confusion
however, as he/she didn't post back again (yet) i assume that the link in my first post works, so try that if you have not yet done so
BBOBECKYJ,
I was only agreeing with THESCREENSAVERS about the ANTC thread. I took it light that if two people found the links to be broken ANTC might look into it. I was not clear in separating that from my own issue or that it was ANTC's advice/tutorial my initial post referenced. You are correct. I was stating ANTC's links did not work. Another great tutorial(minus links). I OBTAINED THE ROMS LAST NIGHT. After navigating through our excellent forums, for 24 hours I found the links for the tools mentioned in ANTC's thread in DR. PUTTINGHAM'S thread that you suggested. Thank you for that. I should have done that initially for THESCREENSAVERS instead of switching to my own frustrating issue. I tried to kill two birds(issues) with one sloppy hand grenade(post). Selfish me. What a mess it is that I have to apologize and clean up the mess I made with 3 more posts(and counting). Now my friend, I am so glad that DR. PUTTINGHAM'S tutorial worked well for you. The wording in your last post makes me less than a fool though or a fool that has proven DR. PUTTINGHAM'S post to not be foolproof. The ROMS DO NOT FLASH FOR ME. I have gone wrong. And wind_sun too. Which, by search is wind_sun's only post...nearly two months ago. But since we are here now. Again, I still want to downgrade so that I can unlock and upgrade. There was no reply to this thread by wind_sun. A lil help? Thanks in advance. CAN ANYONE HELP?
P.S. How did you follow the instructions if you did not read the thread?
No avatar, no gif's, no kewl one-liner...I'm so lame....
To answer your last question first, I used Faria's unlocking guide first. Dr P simplified and explained in more detail the same things in his thread. I read only the first post of the Dr P thread when I got stuck with the Faria one.
I am not aware that anyone would be unable to flash the button rom, (which is not to say it couldn't happen) and just to be very clear, you are using this guide?
Dr P thread is stickied, for amongst other reasons - I think he monitors it and helps anyone with questions. (ANTC is probably busy cooking another wm6 rom atm LOL)
ps try to break up your posts, it is hard reading very long blocks of text (and harder to reply to question within it)
pps don't apologize for posting - that's what forums exist for. it is annoying when it is obvious that someone has not read anything and then expects everything done for them, but you did read and had a go
I'd just like to add my 2 cents here if you don't mind
@ Babyexp
Have you tried downloading Button ROM again as it might be corrupted even though the download completed successfully? That's why some sites like Linux distros ftp have a file with the result of a checksum (SHA1,MD5,CRC32,etc...) so that users know the file isn't corrupted
The other option is to use another PC to see if the RUU crashes same way
cheers
Awesome posts. I feel like I got something accomplished. Then, I didn't. I'm back to WM5. Wish I could lift my chin a little like you guys with WM6....
Are you telling me about reading? I always seem to have the quirks/problems noone else has. I've been browsing the forums for the better part of two days! I'm squinting so much now I look Chinese! LOL. Thanks again. Can I get a link Mestrini?
Babyexp said:
Awesome posts. I feel like I got something accomplished. Then, I didn't. I'm back to WM5. Wish I could lift my chin a little like you guys with WM6....
Are you telling me about reading? I always seem to have the quirks/problems noone else has. I've been browsing the forums for the better part of two days! I'm squinting so much now I look Chinese! LOL. Thanks again. Can I get a link Mestrini?
Click to expand...
Click to collapse
It's past 3am here and my brain cells can't follow what the eyes send them, sorry please be more clear about the... zzzzzzzzzz... link and the reading parts
cheers
hi guys
I'll be quick - as babyexp says, we're not trying to hijack teh thread, but having multiple people with the same issue in one thread, then if someone comes to resolution, is a good thing, imo.
I've been also trying to upgrade an htc wizard to wm6. I've re-downloaded the latest files for button 1.05 (from rapidshare) and lokiwiz, and have been following ANTC's guide. In step 3, he says run button, and let it complete, but when I run it, it also progresses up to 98% on the Wizard and my laptop, then pauses. After 3-4 minutes, the laptop updates to 99%, leaving the Wizard at 98% (red progress bar on the wizard), and stops again. I've left it for about 30 minutes at this point, but now on my 4th try at flashing, it hasn't completed once yet.
After removing the battery, and restarting to the colorbanded screen, I've been able to reapply the tmobile rom (RUU_TMobile_US_226102_22610105_022511_WWE_Ship) to get the phone active again. However, attempting to put button on brings me to up to this 98% hang behavior
I've tried installing the wm6 rom directly on top of the tmobile one, which completes, but on restart, prompts for screen calibratrion, does customization, then is still running wm5 after the restart - even teh start/calibration screens look to be wm5. Strange behavior - my hermes upgraded with no issues, compared to this. Should I perhaps run lokiwiz first before button, and ensure that I run both a U(unlock) and C(Supercid unlock) ?
any pointers appreciated.
tks,
dwight.
dwightery said:
any pointers appreciated.
tks,
dwight.
Click to expand...
Click to collapse
yep, use the original unlocking guide, ANTCs is simplified i think. I linked it in my first post in this thread
ok thanks bbobeckyj - I'll give that a try on monday when i'm back in the office.
btw, "if at first you dont' succeed, try try again" isn't the best plan for these phones . I kept trying to reflash mine, and after about a dozen attempts, the battery died, and that was the end of that. ohh, i thought i had a brick there, as it wouldnt' charge via usb cable (i don't think).
I left it over night on a wall charger, and when i checked this am again, it was back to the colored bar screen, and I was able to put the tmobile base rom back on it. whew!
dwight.
Easy solution to ALLLL of these problems.
go to IMEI-CHECK .. pay the 40 dollars to unlock ur phone.. Update to WM6.. Easy.. Stop being cheap.
Ok first of all a big hi to this great community (xda team) and users.
Im new to this stuff but im in need for a little help, and i hope someone is willing to help me.
I have HTC Touch and im having problems with it. Its broken now it doesn't work. Not to forget to mention the phone i own is chinese made, which means i think is not the original one (even it looks and acts like the real one).
After modifying some phone applications, by installing tweaks and applications i found on internet, i installed some modified Keypad application, and after using it a while, one day it stopped responding and instead of showing Number keys, it only showed black buttons. SO i tried to uninstall it and after successful uninstall i restarted the phone but it showed me the screen aligning thing and i did what was required it booted but was not working properly. so i did several reboots, and then even tried reseting it. after several tries im now stuck on screen error.
I uploaded two videos on youtube how the screen gets mixed and the other problem, hard reset won't work on my device.
Links to videos:
video 1:
http://www.youtube.com/watch?v=ivS0tALyvd0
video 2:
http://www.youtube.com/watch?v=t0DyOiw7Pkw
i would be very happy if anyone could tell me what to do with my device.
PS. Im newbie so i might need some simple instructions if possible.
Thanks in advance.
No one cant help???
I hope someone is willing to give me some instructions...please!!!
Best regards. Gjizaqin
Very strange.
I havent seen any so unhelpfull forum like this :-( im really sad.
I posted the thread asked for help, explained the thing in the best way i could, and no single reply even the one "we can't help" would be nice to see.
Update to my post:
Im writing this with idea of helping others and pointing people to right direction. After maby 1 month of hard exploring i repaired my htc touch (chinese clone)
The phone im using is also known as Elf0100.
So how i fixed the problem:
After trying many many times the standard Hard reset method (Send, stop keys pressed and presing soft reset button with stylus) this method doesn't work with chinese htc clones. So anyone out there having Chinese Htc clone, the right method for doing Hard Reset is: Hold Volume Up & Camera Key pressed, and press Reset button for about 3 seconds without releasing Volume up and camera buttons. After that you should get blue screen, and in the top screen will be shown "Boot loading, hard reset, or something like that im not very sure".
Anyways if you have your Windows mobile damaged (like the one i had), you can repair it with the following method:
1. Download the manufactured version of Windows (or maby this is called ROM) from this site.
2. Format your HTC memory card (Micro SD card), so it will be clean.
3. Move the update.img (you already downloaded from the site) to root directory of your Memory card.
4. Press Volume Up button on your htc and while keeping it pressed , press the reset button.
You should get the blue screen telling the update being downloaded. Wait for a while and it will tell that Update is successfull and your phone will be rebooted.
THis is it.
Although i didnt get any help from this forum, i know i might help others cause this is most frequent place regarding PPC.
Best regards to all.
gjizaqin said:
Update to my post:
Im writing this with idea of helping others and pointing people to right direction. After maby 1 month of hard exploring i repaired my htc touch (chinese clone)
The phone im using is also known as Elf0100.
So how i fixed the problem:
After trying many many times the standard Hard reset method (Send, stop keys pressed and presing soft reset button with stylus) this method doesn't work with chinese htc clones. So anyone out there having Chinese Htc clone, the right method for doing Hard Reset is: Hold Volume Up & Camera Key pressed, and press Reset button for about 3 seconds without releasing Volume up and camera buttons. After that you should get blue screen, and in the top screen will be shown "Boot loading, hard reset, or something like that im not very sure".
Anyways if you have your Windows mobile damaged (like the one i had), you can repair it with the following method:
1. Download the manufactured version of Windows (or maby this is called ROM) from this site.
2. Format your HTC memory card (Micro SD card), so it will be clean.
3. Move the update.img (you already downloaded from the site) to root directory of your Memory card.
4. Press Volume Up button on your htc and while keeping it pressed , press the reset button.
You should get the blue screen telling the update being downloaded. Wait for a while and it will tell that Update is successfull and your phone will be rebooted.
THis is it.
Although i didnt get any help from this forum, i know i might help others cause this is most frequent place regarding PPC.
Best regards to all.
Click to expand...
Click to collapse
Hi gjizaqin,
I feel sorry you lost valuable time looking for an answer to your problem (and found it alone !) but I think you are too hasty to blame this forum. I am myself quite new here and I've already learnt so much using the "search". For instance I found another remark of yours in another thread and also found this http://forum.xda-developers.com/showthread.php?p=2466074#post2466074 where you have your answer
Another reason is the title of your thread Help needed , HTC Touch screen error! like me probably others understood you have a technical problem with your screen (broken or damaged) and nobody could help you but repair shop...
I trust you'll continue contributing here because your last post proves you're a gentleman.
All the best !!!
tito12 said:
Hi gjizaqin,
I feel sorry you lost valuable time looking for an answer to your problem (and found it alone !) but I think you are too hasty to blame this forum. I am myself quite new here and I've already learnt so much using the "search". For instance I found another remark of yours in another thread and also found this http://forum.xda-developers.com/showthread.php?p=2466074#post2466074 where you have your answer
Another reason is the title of your thread Help needed , HTC Touch screen error! like me probably others understood you have a technical problem with your screen (broken or damaged) and nobody could help you but repair shop...
I trust you'll continue contributing here because your last post proves you're a gentleman.
All the best !!!
Click to expand...
Click to collapse
Thanks for your reply tito12,
Anyways its nice forum but not very newbie frendly. I guess the way I wrote this thing will be much easier for any newbie to fix his china htc, without talking too much about roms, loaders etc etc, wich is very confusing for newbies (like me and others).
I thought it was screen problem cause my htc was getting some messy colors while loading (you can see it in the video i provided). And i stated "unhellpfull forum" by keeping in mind that more than 200 people viewed the thread, and not even single one said simply : "i have no idea, or sorry" so i know someone will try to help me out.
Anyways as a owner of HTC I will still contribute to this forum, in the way I can but words I wrote could be some kind of newbie impressions.
Best regards to all.
Sorry to see no one could help you out - maybe its because its a clone and most users here have real genuine ones? Anyway its great to see you got it fixed and stick with the forums as I am sure you will learn a lot from them and soemtimes get an answer. I find that hardware questions dont get many responses but if you go into say a skinning forum you will get more replies.
I for the life of me cant figure out why my camera is completely dead! I have FULLY wiped all caches,everything under 'WIPE' via AMONS and even formatted my SD card as well as trying an alternate SD card(both 8GB--C6speed)--never had a problem w either card on ANY ROM...ALL OF A SUDDEN the past 2days my camera goes to a FULL BLACK SCREEN,when pressing the CAMERA icon. Occasionally the taskbar will remain uptop but will timeout when screen display shutsoff. Now if i launch CAMERA via DESIRE ROM(KING),ill get the notice about clicking trackball to resume camera but as soon as i click it,the message dissapears and the screen will go back to black screen again...and repeat. I SWEAR i have DONE MULTIPLE COMPLETE WIPES AND REFORMATS so im left to believe its THE HARDWARE itself! CAN ANYBODY PLEASE LEND ME A HAND IF the similar problemhas occured...On the Nandroid backups that ive restored from FULLY FUNCTIONING bkups,if i launch NEXUS TORCH it will say CANNOT ACCESS LED---this is THE ONLY info besides the "camera wake message"mentioned earlier that i can provide. Thanks in advance and pleas edont flame for NOT being in Q&A bc this is more of a DEV related restore question.
**oh and BTW--I DID TRY TO INSTALL the DESIRE R2 cam fix and does nothing. I tried it when all was working fine early in the week and it did nothing to help FLASH timing for me,so i NAN restored back to prior state and CAMERA continued working until about THURSDAY night--regardless--PHONE is in OUT OF BOX STATE--MINUS UNLOCKED and it STILL doesnt work!---PEACE and Happy Mothers Day to any Mothers out there in XDA world!
***Captain Obvious to the Rescue!!***
Your hardware has malfunctioned. Contact HTC for a repair.
1. you may have a broken camera, try a stock rom
2. your caps lock button is definitely broken
3. you posted in the wrong section
ghostrida said:
1. you may have a broken camera, try a stock rom
2. your caps lock button is definitely broken
3. you posted in the wrong section
Click to expand...
Click to collapse
1. i should have known you were from Philly and cant read--I TRIED STOCK ROM
2. CAPS is to put highlights on key terms so idiots dont read over the fact that I DID TRY STOCK ROM---see how that helps?
3. Thanks for your informative responses---any suggestions from CAPTAIN OBVIOUS how to get service on a ROOTED device without being charged full price on the phone?? Ahhh--thought not!--So i tried here to see if anyone else had similar situation. AGAIN-thanks for your help as well SERIAL TOON--geez
If it's a hardware failure they won't charge you.
I think it will help if you go through Google Cust service first...they will end up redirecting you to HTC repair. Provide all truthful information on your issue, proving that you have done some legitimate trouble shooting and they will realize that it is a hardware issue, not the ROM flashing or bootloader unlocking that caused the problem. Someone else on the xda forums had a rooted phone with bluetooth problem and was able to send to HTC for repair for free...with a 4 day turnaround!
Good luck!
What do you base this on...Heresay?
BlueScreenJunky said:
If it's a hardware failure they won't charge you.
Click to expand...
Click to collapse
I didnt intend to sound rude,im just a little pissed right now..I Only ask bc i already had an issue in January days after receipt of phone. Issue was solved by sending me a new battery bc other was causing random shutdowns (ive since forwarded this info to another XDAmember that had exact same issue and they give him replacement phone at 1st but issue continued to occur--i told him about my story after he posted his problem, he contacted them this weekend and confirmed with me today that a new battery was on the way..see my public IM's for info). Anyway,when i was dealing with the battery issue they said they would definately NOT be able to fix under warranty bc the phone is rooted and unlocked. I can attest to the few people on here that said theyve been successful in such cases,but either way,IVE ALREADY STATED that i tried the DESIRE R2 camera kernal to see if that helps,so im not going to be dishonest and tell them i havent tried anything other than custom roms. Again..positive suggestions or similar experiences with warranty info would be appreciated....trollers looking for a funny post or to degrade people can eat one!
joshlusignan said:
I think it will help if you go through Google Cust service first...they will end up redirecting you to HTC repair. Provide all truthful information on your issue, proving that you have done some legitimate trouble shooting and they will realize that it is a hardware issue, not the ROM flashing or bootloader unlocking that caused the problem. Someone else on the xda forums had a rooted phone with bluetooth problem and was able to send to HTC for repair for free...with a 4 day turnaround!
Good luck!
Click to expand...
Click to collapse
Thanks JOSH, ill look into it tommorrow--as i stated tho--i feel im being dishonest for trying the DESIRE R2 cam and saying that they should cover it---uninformed people will assume THAT couldve caused it,even though i used phone afterwards for a few days w no side effects
Hey Milton, like others have mentioned in here might want to try flash back to stock and seeing if the problem persists. If it does then your looking at a hardware problem and you should contact HTC/google for repair.
Yea...i was thinking that from get go--(hardware prob). Im on cheesy STOCK ROM right now and have been for cpl hrs...but its obvious its gotta be hardware...NOW comes the crappy part of trying to explain it to HTC when attempting to get an RMA!--Yee Haa!
MOD PLEASE CLOSE OR DELETE---THANKS!
Milton, among the items on the very small list of things folks around here want in return for helping you is that you lay off the caps. Doesn't highlight anything that you'd want to highlight.
Doug
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
milton007 said:
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
Click to expand...
Click to collapse
That seriously hurts my eyes to look at. Try using proper punctuation and grammar. It's very simple and still gets your point across.
As for your phone. Call Google which will probably have you call HTC. People have gotten their rooted devices fixed for free if it's a genuine hardware problem and nothing caused from the rooting process.
milton007 said:
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
Click to expand...
Click to collapse
You should send it to HTC for repair. Charging fee or not, but thats the only option to you right now because its a hardware failure.
mikroN1 said:
That seriously hurts my eyes to look at. Try using proper punctuation and grammar. It's very simple and still gets your point across.
Click to expand...
Click to collapse
I was thinking the exact same thing, don't know where he must have learned how to type. Then you criticize people from Philly, or whatever its called somewhere, for not knowing how to read. I would say mirror that advice and learn how to type.. type properly.
Torch will work until camera app is used then it wont work again until i reboot. After reboot, torch will work ONLY on regular/lower setting. MAX brightness will not work. Toggle back to LOW setting and torch will work again. Im going to try what DOUG suggested bc that is the only thing i havent tried yet...but the way torch and camera are acting up and requiring reboots keeps me willing to try software tricks first...WHAT ties the TORCH's HI setting to the camera app adn yet keeps the LOW setting seperate!??..ill try the TORCH dev real quick for some insight on how the two work hand in hand.Thanks for anyone using their time to help instead of criticize. Sorry for mocking ones ability to read but i was quite [email protected] time bc i lost a major function on my phone.My apologies to all
Seriously Milton? More?
milton007 said:
Please DONT lend assistance to someone like this. IF they cant bither to read THE MOST SIMPLEST instructions, they should NOT be attempting this in the first place...thats just sheer ignorance...
Click to expand...
Click to collapse
The attitude, hostility and the caps are not welcome here.
Along with the others I have no sympathy for you. Learn proper grammar and get a better attitude.
Troll much? Go tell your mother happy mothers day if you have that much time to pull up old posts from people asking questions in a 'kernal forum' about basics. Basics that anyone should know, if not they stand a much better chance on damging their phone. It wasnt being ignorant. Since you know everything there is to know about everyones posts, tell me where the topic dealing with my specific camera issue has been previously posted and ill be glad to read and search thru that forum. I wasnt the one asking questions about something mentioned in the OP (uh oh i used caps--oh geesh-someones gonna be saaad now!)and numerous pages before. Im sorry i dont spend all my life on forums to know that only words approved for caps are indeed CAPITALIZED. Petty little boy-and by the way, i was trying to stress your good advice by typing your name in caps so people would credit you with the help-Sorry to have taken your precious time sir. Good day.
Okay, I'm not sure what has happened. I picked up my HD2 last week, I had WinMo running until I got home from the store LOL. After trying the different builds I settled on Darkstone FROYO for obvious reasons to me. Ran it ever since, until today, I decided to give a different radio a try due to the fact that large file downloads ie Google Sky Map would fail and I read that a different radio may help. After flashing the radio I went from the Chucky ROM to RC4.7 BLACK TMOUS VR ROM. All went well. Backed up my SD CARD DATA and reformated it to FAT32 32KB, copy my backup back on the SD and loaded dual boot.
Booted right up into Android and right away i see my hard keys are lit up. To be honest I didn't know they even were lighted. LOL.
Anybody else notice this?
They are not working in any build as of now. Are you sure that when you booted into Android from WM, these buttons were not lit up.
If they were, they gonna be lit up all the time (even if you lock the device). If that is the case, would suggest you to reboot it to windows and boot into android only when the buttons are not lit up.
They are on... but yes you are correct. they are on all the time. Even when I lock or when the device goes to sleep.
You booted it from WM with them on, wait til they turn off before booting android
I noticed something else too... I still had the boot screen from the Chucky ROM even after the flash to the VR ROM. So I just reflashed to AxLor DF1 Xlite and that is taken care of. my lights are now off yet again.
wasted thread this has been talked about 1000 times over find another way to get your post up
they shouldnt be lit up lol
thatruth132 said:
wasted thread this has been talked about 1000 times over find another way to get your post up
Click to expand...
Click to collapse
not being rude but dude u need to relax.people need help and they want solution quick not everyone is like u on finding solutions the easy way.if u not gonna try to help someone dont bother posting anything.
GHOST99K said:
not being rude but dude u need to relax.people need help and they want solution quick not everyone is like u on finding solutions the easy way.if u not gonna try to help someone dont bother posting anything.
Click to expand...
Click to collapse
i agree... but maybe that how "he's" getting his post count up... lol
anyways, this has happened to me a couple times and i agree with earhog, wait till they are off in WM before u run HARET. this way they'll be off when you boot android and wont drain your battery as quickly...
rlee
Damn... I have always searched the forum for answers and advice prior to posting any questions... hence my post count. I did do a search and all I could pull up was posts about them not working. This was more of observation than a question that I thought was strange.
Nothing more.
---
Sent from my HD2 DROID with XDA.
sicdroid said:
Damn... I have always searched the forum for answers and advice prior to posting any questions... hence my post count. I did do a search and all I could pull up was posts about them not working. This was more of observation than a question that I thought was strange.
Nothing more.
---
Sent from my HD2 DROID with XDA.
Click to expand...
Click to collapse
exactly my point since this android port hit all we get are people posting things that are not helpful ...how is this helping any one , so what u are telling me is we need to help him figure out why his button lights are staying on ..the is a effin emulator ....how about i go post a thread ..."my android market is working"....wtf is that going to do for any one when there a 15 threads saying the same thing find one of thse thread to "CONTRIBUTE" to ...
Every post should be from a Developer or Chef?? The point of the post was... hey this is what is happening, has it happened to anyone else? How did you fix it? Ideas?
The EXACT point of this forum. If you you knew the answer and it was nothing that intrigued you... why did you open the post? Lol. Anyway, it has been answered, issue solved.
---
Sent from my HD2 DROID with XDA.
and you do have a point but the forum has rules and there specific rules for this whole hd2 android forum , thats why when you see people like me saying this stuff we never just put the answer its because would you tell your child the answer all the time no because we all know he really wont learn anything...which is the real reason for this site
thatruth132 said:
and you do have a point but the forum has rules and there specific rules for this whole hd2 android forum , thats why when you see people like me saying this stuff we never just put the answer its because would you tell your child the answer all the time no because we all know he really wont learn anything...which is the real reason for this site
Click to expand...
Click to collapse
I am using my first post just for you. You sir, are an ass and need to go elswhere with your "higher-than-mighty" attitude. Since none of the roms are finalized, this is an acceptable topic for this section. OP even stated later on, all he found was posts for the buttons NOT working. And it is apparent that he was asking if anyone else has ran into this issue. For all we know, there may be an issue the the ROM he has loaded that is causing the buttons to stay on like that.
So heed your own advise and stop padding YOUR post count.
noticed something like that too. the button lights are on SOMETIMES. I can say for sure, I didnt start haret with the lights on, but at some point the lights went on during running android (and stayed on). I think an incoming call triggered it, but I'm not sure.