G1 running on Hero Booting Issue - G1 General

This was the g1 I succesfully flashed a rom to and was doing ok (but slow) until I put a sdcard and sim chip in to flash the latest Hero rom to.
In this order this is what happened.
Tmo G1 screen came on
went to black screen and "hung"there
Pull and replaced the Battery a few times to no advail.
Rebooted into recovery mode and hit alt+w
to wipe (was successful) and then hit back+home to reboot
Now it just keeps replaying the hero boot animation over and over.
Any Suggestions?
Thanx in Advance

wipe ext partition.

Do you even have these? You should
1.Haykuro SPL not HARD
2.EXT 3/4 issues w/ 2
3.Amon_RA 1.5.X the cyan 1.4 doesnt have the new feats of amon

Thanx for the replies.
I forget the name of the recovery image I have. But the hero rom I had flashed was a JaHero(Thats what it said on the home screen)which was a very early hero rom and what ever recovery image was around at the time.

So you have cyan 1.4

wipe, wipe then wipe again
I experienced the same. Wipe everything including the D cache. Then re-flash the ROM. I'm using SenseHERO-v1.4 Theme version. There no better Hero for the G1, right now. It doesn't use apps2sd. As a result, snappier less lag. Also, I have greater success with Amon RA 1.5.1. Actually based on Cyanogen's 1.4 with more features added.
Regards, davidrol

You said earlier that you wipe. Never wipe when you're using a hero ROM, you have to wipe then reflash, otherwise it will boot loop.

Related

Roms won't boot MT3G?? Help Please Lost :-(

Hello all,
Let me first preface this with a little story. I currently have a Merlot and a Black MT3G for wify. On my Merlot with still perfect spl and cyan recovery I am running MghtyMax 1.9.1 rom and it works great. She decided to use it on black one that is rooted same but running RA 1.2.2 recovery and rooted ra rom so figure no problem and having issues I can't get either MghtyMax or cyano 4.2.1 to boot on it just hangs on MT3G screen never getting to android/htc over 15 mins just hangs.
I took the mem card (16gb sandisk) 15.4 gb for fat32, 500 mb ext4, 128 mb linux swap fresh partitions. Installed mghtymax and was running good. When I power cycled the phone turning back on froze on MT3G screen. I tried to whipe it, pull battery whipe and flash again. Same result powered up and on reboot wouldn't power up again stuck on mt3g screen.
Figured maybe recover img so I flashed cyan 1.4 recovery what I have on mines, whiped, repartioned, battery pull whiped and installed. Still stuck on mt3g.
Maybe since is still "perfect" spl tried the 1.33.2005 engineering spl and reapeated above steps and no go.
Ok maybe I missed something. Flash back to stock with sappimg.nbh, used 1 click method to put on cyan 1.4, put on eng spl again, whiped, repartioned, push rom battery pull, whipe install still stuck. Ok maybe the rom on that phone different for what ever reason. Tried to whipe and install ADP base then Cyan 4.2.1 (which also works on my device) same issue. Never has a problem getting to either fastboot or recover console though. ended up putting back stock for now.
Any ideas on what I may be doing wrong? Same exact roms and setup that works on my merlot one don't work on a black one. Any help on this would be greatly appreciated as I am completely stumped by this.
I think i figured it out if anyone else has the problem. These are the stps I did to fix the problem.
Flashed back stock with nbh
recovery flasher to put on cyan 1.4
flashed eng spl (not needed)
whiped and battery pull
whiped and installed adp base from cyano thread LET IT BOOT to sign in.
installed cyano let it boot again
whipe battery pull
whipe install hero boot and good
I was having bluries so I had to do bluries fix but up and running

Can't Restart my CM MT3G?

I have flashed the new CyanogenMod and the Cyanogen Recovery 1.4 and when I wipe everything and flash, it'll load up and I can use the phone 100% perfectly, but once I reboot my phone, or turn it off and on, it never goes past the green boot screen. Anyone have any solutions/reasons why it does that? It's with every single Cyanogen mod too, i've tried several of them.
Probably because you have a lot of apps?
If not, reflash it.
tmc_adio07 said:
I have flashed the new CyanogenMod and the Cyanogen Recovery 1.4 and when I wipe everything and flash, it'll load up and I can use the phone 100% perfectly, but once I reboot my phone, or turn it off and on, it never goes past the green boot screen. Anyone have any solutions/reasons why it does that? It's with every single Cyanogen mod too, i've tried several of them.
Click to expand...
Click to collapse
what do you actually flash and what is the actual process, you shouldnt have any issues after it boots up the first time, wipe everything and make an exterior partition meaning get rid of your cyanogen recovery 1.4 and get amon ra's latest... look in the dev section and read up on cyan's page on how to flash the rom
mt3g said:
what do you actually flash and what is the actual process, you shouldnt have any issues after it boots up the first time, wipe everything and make an exterior partition meaning get rid of your cyanogen recovery 1.4 and get amon ra's latest... look in the dev section and read up on cyan's page on how to flash the rom
Click to expand...
Click to collapse
Thanks for help man, right now I'm running dwang's rom 100% perfect w/ no issues at all. it can reboot and everything just fine. I'm just a little worried on going back and trying to flash cyanogens.
When I installed it, I first did the root process, downloading the .apk file and going through all that part smooth, then I downloaded and flashed the Cyanogen Recovery 1.4, and from there I downloaded the two files (DRC83_base and the latest cyan's rom, i forgot the version #) and applied update from SD, first doing DRC83 and right after doing the rom itself, without rebooting the phone. It loads up A-OK and I can installl the apps and go about my business, but once I need to restart my phone, it just never turns back on. I'm puzzled completely...I even did the whole unroot and reroot thing and STILL i'm not having any luck.
K I got confused in there some where did you flash a cyan rom at all in there I read that you flashed the drc83 zip file but sounds like you just flashed that and booted the phone lol... never tried that but.... any way it seems like you are doing everything correct onlything I could suggest is make sure you have the correct htc base image, and make sure you wipe and repair everything!!!!! and also try a differant download of cyanogen as you might have gotten a bad one or something I have never had any issues with a cyanogen rom except maybe a FC back on 4.0xx or something
兄弟,估计你刷成砖了。同情ing。。

GSM Hero boot problems

I recently rooted my GSM Hero and applied ModaCo rom.
I then wiped and put on the Hero BeHero ROM.
When I went to reset my Hero, it stuck on the HTC Hero boot screen
(the one with the waving Androids coming out of the O and H).
I cannot get past that screen, I cannot get to the MENU>POWER menu.
Anyone got any advice how to restore my Hero?
I'm pretty much desperate.
you have an apps2sd partition?
Hellwÿck said:
I recently rooted my GSM Hero and applied ModaCo rom.
I then wiped and put on the Hero BeHero ROM.
When I went to reset my Hero, it stuck on the HTC Hero boot screen
(the one with the waving Androids coming out of the O and H).
I cannot get past that screen, I cannot get to the MENU>POWER menu.
Anyone got any advice how to restore my Hero?
I'm pretty much desperate.
Click to expand...
Click to collapse
What is your logcat readout?
btdag said:
What is your logcat readout?
Click to expand...
Click to collapse
Let's pretend I have no idea what that is
Its probably because you did not wipe the cache option in your recovery as well as data.
Try to flash another rom.. I had the same problem with the Kimera rom...
I wasn't able to boot so I tried to flash another rom and it worked
But before you should try to wipe everything
I get exactly the same problems. Running MoDaCo Custom ROM 2.5 now, with APP2SD and Dalvik cache copied to SD as well....simple wipe to factory settings, applying the Custom 2.1 ROM always makes my phone to lock on the first boot screen. I tried SenseHero 2.1, 2.2, Villain 5.4...always the same....
so actually I need to wipe the delvik cache and apps from sd as well ? how do You wipe Dalvik cache? I got RA-Hero recovery console...
i am about to bet you a case of beer that you have an ext4 partition on your sdcard... remove that or make it ext2/3 and it will boot...
kendong2 said:
i am about to bet you a case of beer that you have an ext4 partition on your sdcard... remove that or make it ext2/3 and it will boot...
Click to expand...
Click to collapse
I had no partition on it.
I sent it away to be looked at and they guy in the shop said it was "beyond repair" yet I can see the Hero "waving android" screen (it still won't boot past that).
How do I fix this?

Phone cant take 2.2 :(

So every time I load a 2.2 ROM, My phone starts to wig out and so random things when I am trying to type or anything else. I am rooted and have the ota 2.x radio installed. I keep having to go back to a 2.1 ROM with hydra kernel and everything is stable. I do a factory reset every time but still no go. any ideas?
tlevash said:
So every time I load a 2.2 ROM, My phone starts to wig out and so random things when I am trying to type or anything else. I am rooted and have the ota 2.x radio installed. I keep having to go back to a 2.1 ROM with hydra kernel and everything is stable. I do a factory reset every time but still no go. any ideas?
Click to expand...
Click to collapse
a factory reset is not the same as a wipe from recovery menu afaik (if you mean a factory reset from bootloader (white screen))
boot into clockworkmod recovery and perform a wipe data/cache there, then flash it
some even experience problems with running the wipe from rom manager, so do it in the recovery menu instead
Thanks for the help. I tried what you said above and downloaded Sky raider 2.0 again. renamed it to update.zip then rebooted into clockwork. I did the wipe data/cache but sadly, I get the same results. I cant even get through the setup after the rom is installed. screen is unresponsive to my touch, but seems to have a mind of its own. I had best luck with CM 6 test 8 i downloaded from ROM manger, that ran for a day before starting to screw up.

CM 6.1 Stable

Hey, question. Every single CM from 6.0 I have downloaded I have had issues with. I love the rom, but every time I get the same issue. When I install the rom all worked fine. I wipe all data, clear cache, and have to reinstall of course everything, my issue is that my phone will randomly freeze. Sometimes I get an error message saying the process process.android has failed, other times it just freezes. Does anybody have any ideas?
I loved CM 6.1 best Rom I've had yet. But after a week it started acting up and having problematic auto shutdowns like 8 times a day. I then searched for another stock Rom and tried skyraider vanilla, I hate it. It's basically skinned sense. That's it. I enjoy sense but it eats battery. My favorite roms so far are the desire Hd Rom and
CM but without the shutdowns is be perfect.
Sent from my ADR6300 using XDA App
only people
So this is the only other person I have run into with this problem. Everybody else I have talked to over other forums or IRC has never heard of these issues at all.
The only time I've ever had those shut down issues is when I start screwing with themes or when I start screwing with kernels or overclocking. I'm not sure what you've got going on there though
Well...
Well I have done some of that however I have reverted to "stock" several times. I have Hboot .92 installed also, i saw something online. The latest radio is also installed. I guess has anybody else seen any issues like this?
Try formatting the system in addition to wiping. CM does not format anything when you flash it. In CWM its under mount sd section.
Sent from my Htc Incredible using XDA App
This happened to me today, I am 99% sure it was the kernel I had installed though. I put back invisiblek's #18 and had no problems before or after.
okay I can mess around with that and see what happens then.
justinmburrous said:
okay I can mess around with that and see what happens then.
Click to expand...
Click to collapse
Let us know please.
This morning, I d/l the cyanogen 6.1 stable from ROM Manager, I then rebooted my phone into hboot then into recovery console. I then did a wipe of dalvik and battery stats. I then did the wipe data and then the clear partition cache, I then flashed the Cyanogen 6.1 Inc rom... then went fine... I loaded up into Cyanogen I then did a reboot and that's when my phone would not leave the HTC Incredible screen when rebooting! any ideas that can help me? I really like the Cyanogen ROM
Help!!! please!
neur0tk said:
This morning, I d/l the cyanogen 6.1 stable from ROM Manager, I then rebooted my phone into hboot then into recovery console. I then did a wipe of dalvik and battery stats. I then did the wipe data and then the clear partition cache, I then flashed the Cyanogen 6.1 Inc rom... then went fine... I loaded up into Cyanogen I then did a reboot and that's when my phone would not leave the HTC Incredible screen when rebooting! any ideas that can help me? I really like the Cyanogen ROM
Help!!! please!
Click to expand...
Click to collapse
You need to be a little more specific but do this.
1. Click on the Cyanogen link in my signature and download it.
2. Download google apps
3. Reboot into recovery
4. Wipe Data/Factory Reset
5. Wipe Cache Partition
6. Wipe Dalvik Cache
7. Select install zip from SD card and choose the cyanogen ROM, let it install
8. Select install zip from SD card again and choose the google apps.
9. Reboot your phone and sign into your google account and let everything sync
This is the best way to do it. Not through ROM Manager.
If this doesn't work then I have absolutely no idea. That is the 100% correct way to flash a ROM.
neur0tk said:
This morning, I d/l the cyanogen 6.1 stable from ROM Manager, I then rebooted my phone into hboot then into recovery console. I then did a wipe of dalvik and battery stats. I then did the wipe data and then the clear partition cache, I then flashed the Cyanogen 6.1 Inc rom... then went fine... I loaded up into Cyanogen I then did a reboot and that's when my phone would not leave the HTC Incredible screen when rebooting! any ideas that can help me? I really like the Cyanogen ROM
Help!!! please!
Click to expand...
Click to collapse
I had to revert back to #18 kernel working fine now!
neur0tk said:
I had to revert back to #18 kernel working fine now!
Click to expand...
Click to collapse
Yeah I mentioned it earlier in this thread. For some reason #21 and #22 do not like cyanogen.
I'm running #21 on my phone and I haven't had any issues yet.
Yeah IDK either... I had to revert now it's running like a champ! love the Inexus theme!
ok an update, I have everything working. I an using cm6.1, latest radio (on cm site), kernel 27, hoot .92, and the very latest clockwork that just came out. I know those last two should not matter, just letting you know. As of right now my phone is not freezing and everything works fine, even faster than before. When I first turned it on the phone did freezer and after that yet took a long time for 3g to start working. On reinstall I did a total revert to stock then did a factory reset and cleared all caches and everything on the phone there is to clear. It has been afew hours. I will update this if there are any more problems
Sent from my ADR6300 using Tapatalk
Keeps rebooting more and more time to switch roms
Justinmburrous
Justinmburrous.com

Categories

Resources