So every time I load a 2.2 ROM, My phone starts to wig out and so random things when I am trying to type or anything else. I am rooted and have the ota 2.x radio installed. I keep having to go back to a 2.1 ROM with hydra kernel and everything is stable. I do a factory reset every time but still no go. any ideas?
tlevash said:
So every time I load a 2.2 ROM, My phone starts to wig out and so random things when I am trying to type or anything else. I am rooted and have the ota 2.x radio installed. I keep having to go back to a 2.1 ROM with hydra kernel and everything is stable. I do a factory reset every time but still no go. any ideas?
Click to expand...
Click to collapse
a factory reset is not the same as a wipe from recovery menu afaik (if you mean a factory reset from bootloader (white screen))
boot into clockworkmod recovery and perform a wipe data/cache there, then flash it
some even experience problems with running the wipe from rom manager, so do it in the recovery menu instead
Thanks for the help. I tried what you said above and downloaded Sky raider 2.0 again. renamed it to update.zip then rebooted into clockwork. I did the wipe data/cache but sadly, I get the same results. I cant even get through the setup after the rom is installed. screen is unresponsive to my touch, but seems to have a mind of its own. I had best luck with CM 6 test 8 i downloaded from ROM manger, that ran for a day before starting to screw up.
Related
I have flashed the new CyanogenMod and the Cyanogen Recovery 1.4 and when I wipe everything and flash, it'll load up and I can use the phone 100% perfectly, but once I reboot my phone, or turn it off and on, it never goes past the green boot screen. Anyone have any solutions/reasons why it does that? It's with every single Cyanogen mod too, i've tried several of them.
Probably because you have a lot of apps?
If not, reflash it.
tmc_adio07 said:
I have flashed the new CyanogenMod and the Cyanogen Recovery 1.4 and when I wipe everything and flash, it'll load up and I can use the phone 100% perfectly, but once I reboot my phone, or turn it off and on, it never goes past the green boot screen. Anyone have any solutions/reasons why it does that? It's with every single Cyanogen mod too, i've tried several of them.
Click to expand...
Click to collapse
what do you actually flash and what is the actual process, you shouldnt have any issues after it boots up the first time, wipe everything and make an exterior partition meaning get rid of your cyanogen recovery 1.4 and get amon ra's latest... look in the dev section and read up on cyan's page on how to flash the rom
mt3g said:
what do you actually flash and what is the actual process, you shouldnt have any issues after it boots up the first time, wipe everything and make an exterior partition meaning get rid of your cyanogen recovery 1.4 and get amon ra's latest... look in the dev section and read up on cyan's page on how to flash the rom
Click to expand...
Click to collapse
Thanks for help man, right now I'm running dwang's rom 100% perfect w/ no issues at all. it can reboot and everything just fine. I'm just a little worried on going back and trying to flash cyanogens.
When I installed it, I first did the root process, downloading the .apk file and going through all that part smooth, then I downloaded and flashed the Cyanogen Recovery 1.4, and from there I downloaded the two files (DRC83_base and the latest cyan's rom, i forgot the version #) and applied update from SD, first doing DRC83 and right after doing the rom itself, without rebooting the phone. It loads up A-OK and I can installl the apps and go about my business, but once I need to restart my phone, it just never turns back on. I'm puzzled completely...I even did the whole unroot and reroot thing and STILL i'm not having any luck.
K I got confused in there some where did you flash a cyan rom at all in there I read that you flashed the drc83 zip file but sounds like you just flashed that and booted the phone lol... never tried that but.... any way it seems like you are doing everything correct onlything I could suggest is make sure you have the correct htc base image, and make sure you wipe and repair everything!!!!! and also try a differant download of cyanogen as you might have gotten a bad one or something I have never had any issues with a cyanogen rom except maybe a FC back on 4.0xx or something
兄弟，估计你刷成砖了。同情ing。。
This was the g1 I succesfully flashed a rom to and was doing ok (but slow) until I put a sdcard and sim chip in to flash the latest Hero rom to.
In this order this is what happened.
Tmo G1 screen came on
went to black screen and "hung"there
Pull and replaced the Battery a few times to no advail.
Rebooted into recovery mode and hit alt+w
to wipe (was successful) and then hit back+home to reboot
Now it just keeps replaying the hero boot animation over and over.
Any Suggestions?
Thanx in Advance
wipe ext partition.
Do you even have these? You should
1.Haykuro SPL not HARD
2.EXT 3/4 issues w/ 2
3.Amon_RA 1.5.X the cyan 1.4 doesnt have the new feats of amon
Thanx for the replies.
I forget the name of the recovery image I have. But the hero rom I had flashed was a JaHero(Thats what it said on the home screen)which was a very early hero rom and what ever recovery image was around at the time.
So you have cyan 1.4
wipe, wipe then wipe again
I experienced the same. Wipe everything including the D cache. Then re-flash the ROM. I'm using SenseHERO-v1.4 Theme version. There no better Hero for the G1, right now. It doesn't use apps2sd. As a result, snappier less lag. Also, I have greater success with Amon RA 1.5.1. Actually based on Cyanogen's 1.4 with more features added.
Regards, davidrol
You said earlier that you wipe. Never wipe when you're using a hero ROM, you have to wipe then reflash, otherwise it will boot loop.
I tried to use SuperOneClick to root my phone and it seemed to work. The program came back saying I successfully rooted my phone.
I then went to ClockworkMod to install cyanogen and clicked on the appropriate boxes to begin the download process for cyanogen 6.0 stable mod and ran it.
My phone rebooted and started to run some scripts.
Now, the phone just reboots to the green mytouch screen and continues to loop like that and I have no idea what to do.
I can get into fastboot on the mt3g and when I do, my pc makes the sound that states that the phone is connected but when I try to get into the mytouch, using adb, my pc cant access it but when I plug up my G2, I can see the serial number and such showing that it is connected.
I tried to follow the fastboot driver installation page but it didn't seem to work.
Bottom line is I would really enjoy a functional MT3G in either the regular form or cyanogen (which is why im in this predicament now )
For the the record,
I was running 1.6 but got the OTA update for 2.2 before I ended up blowing up my phone.
Thanks for reading this and any aid would be greatly appreciated.
UPDATED:
I found something called SAPPIMG.NBH that allowed me load Android 1.5 onto my phone. I now am back to a functioning device but still, I am super stuck on trying to get cyanogen onto my device. Any helpful hints? From what you read above, did I miss something?
Thanks again.
... Sadness... I have been bashing my face against this mt3g and haven't been able to get cyanogenmod on this phone for the life of me. I have tried all of the builds from 5.08 up to RC1 of 6.10 and I just get the infinite loop at the cyanogen boot up screen. I even tried to flash 2.23.XXXX radio to see if it gets past the boot loop and it does not. Anybody have any insights into my issue?
Thanks,
You must go into recovery mode(boot up by holding down home + power). That will get you to Clockworkmod recovery(I am assuming since you said you downloaded using Clockwork app). From there you need to wipe cache, and anything else you can wipe. Then try installing Cyanogenmod after that. Without wiping the there is not enough space to install and it causes a bootloop.
I'm in the same boat, I'm stuck in a boot loop and I cannot get any ROM to fully load in. I'm using clockwork recovery Radio 2.22 32B.
I tried wiping everything but that still doesnt seem to work. I noticed when I try wiping Davlik cache I dont see any message on the bottom. I thought it would normally give me some sort of message stating that it is wiping davlik or something so maybe it isnt actually wiping it?
Is there some other way to make sure davlik is wiped? Or something else I can do. I just want the phone to boot up at this point. I can get into recovery but thats it.
I know I shouldve done a backup but dumb me was such in a rush I completely forgot, I know im a idiot...
Het I found that same .img file and also reverted back to 1.5 then just went up to 2.2 not sure what was wrong but Rom I put on just went into a boot loop. Maybe it was clockwork recovery.
Sent from my ADR6300 using XDA App
the padawan becomes the master... Sort of...
The problem is that you cannot go directly to 2.2 from 1.5. You have to do the incremental upgrades that take you from 1.5 to 1.6 then 1.6 to 2.2
I'm running an S4 and have this very weird issue where after installing a custom rom, the phone would reboot and load the rom successfully, but if I ever reboot it, it never wants to go past the Samsung logo.
If I try entering TWRP and fixing permissions or factory reset, it just comes up with errors and fails. The only way around it is to format data, then reflash the rom.
But now I have a nandroid backup so everytime I reboot, I basically have to reflash the rom.. It's happened on at least 2 roms!
I've used the search function on the forums and found a thread was inconclusive so I've made this thread.
Thanks in advance
(This is my first Android phone too, so I'm not 100% familiar with all the different software and techniques, but I can definitely learn!)
Try flashing the ROM with the latest stock CWM. TWRP can cause issues.
Kesh09 said:
I'm running an S4 and have this very weird issue where after installing a custom rom, the phone would reboot and load the rom successfully, but if I ever reboot it, it never wants to go past the Samsung logo.
If I try entering TWRP and fixing permissions or factory reset, it just comes up with errors and fails. The only way around it is to format data, then reflash the rom.
But now I have a nandroid backup so everytime I reboot, I basically have to reflash the rom.. It's happened on at least 2 roms!
I've used the search function on the forums and found a thread was inconclusive so I've made this thread.
Thanks in advance
(This is my first Android phone too, so I'm not 100% familiar with all the different software and techniques, but I can definitely learn!)
Click to expand...
Click to collapse
go into the wipe options on twrp - go to advanced and select - cache, dalvik, system, data - swipe
then do a normal full wipe
reflash the chosen rom
power off rather than reboot
then power up
something gets fracked with the wipes somewhere and thats how i fixed it.
either that or flash philz recovery through odin and do a "new rom" wipe
Gotcher said:
Try flashing the ROM with the latest stock CWM. TWRP can cause issues.
Click to expand...
Click to collapse
For some reason, whenever I install CWM, it keeps getting stuck at "recovery booting" and once in maybe 30 times it works, haven't got it to work in a while.. Not sure what's happening, but if I flash TWRP again, it boots up fine. Am I doing anything wrong? Using Philz touch..
scottyf79 said:
go into the wipe options on twrp - go to advanced and select - cache, dalvik, system, data - swipe
then do a normal full wipe
reflash the chosen rom
power off rather than reboot
then power up
something gets fracked with the wipes somewhere and thats how i fixed it.
either that or flash philz recovery through odin and do a "new rom" wipe
Click to expand...
Click to collapse
This hasn't worked for me, and yeah, I can't seem to get CWM to like my phone..
Kesh09 said:
For some reason, whenever I install CWM, it keeps getting stuck at "recovery booting" and once in maybe 30 times it works, haven't got it to work in a while.. Not sure what's happening, but if I flash TWRP again, it boots up fine. Am I doing anything wrong? Using Philz touch..
This hasn't worked for me, and yeah, I can't seem to get CWM to like my phone..
Click to expand...
Click to collapse
try flashing the rom twice in succession. it will stick eventually but its just getting the right combo. these S4's are a right pain in the ass just now.
also another option would be downloading a rom with Aroma installer onto a micro sd and see if that gets you out of the problem. ive found on other devices ive had that a rom with Aroma can sometimes get you moving (id suggest Omega rom as a good solid base)
scottyf79 said:
try flashing the rom twice in succession. it will stick eventually but its just getting the right combo. these S4's are a right pain in the ass just now.
also another option would be downloading a rom with Aroma installer onto a micro sd and see if that gets you out of the problem. ive found on other devices ive had that a rom with Aroma can sometimes get you moving (id suggest Omega rom as a good solid base)
Click to expand...
Click to collapse
The rom I'm flashing (twice) now is Omega actually!
I'll see how this goes! Hoping it's okay!
..
try to install another rom clean & stable and do full wipe or trust me the best to turn the phone to default firmware.
Kesh09 said:
The rom I'm flashing (twice) now is Omega actually!
So are you suggesting I install Omega, get it run, then install Aroma installer and reinstall it?
Click to expand...
Click to collapse
no i just meant flash the rom twice IF it didnt have Aroma.
try GoldenEye rom from micro sd (obviously downloaded and placed on the card through a pc and put back in the phone).
Or as above - you might have to start from scratch and use Odin to revert back to stock and re-root etc again.
Although i said Aroma sometimes helps, being honest it was a rom with Aroma that started causing me a similar issue in the first place (Not Omega or Foxhound though)
No luck guys... I think I'd rather start from a stock rom too. When I created my stock rom backup, it was through nandroid and an CWM format, but CWM did work, it froze when it was checking for MD5 or something...
But now I'm trying to find the right firmware for my phone, is there any thing I need to look out for? Gt-i9505 from Australia?
http://forum.xda-developers.com/showthread.php?t=2265477
In that thread, there's two of them, I'm downloading the one closest to when I bought it which was June
Hello all,
I realize you all are busy but I'm at my wits end here. I installed my bootloader and recovery using afterOTA. This worked really well, I installed Thor 1.7.3 recovery and ICS V8 bootloader using the utility. I then booted into recovery and did a factory reset (really), reset cache and dalvik, battery settings as well... I then went to install ZIP (JB 4.1.2 CM10-FLEX v6supercharged_Aroma-Rev3.4) from internal storage (download folder). I customized the ROM then went back and installed the random apps...
After this was done I hit next and installed the ROM. It didn't take as long as I thought it would, and I hit reboot when it was done, but came to a screen that I could press next on. The installer screen said it was installing permissions, it didn't say that it was completely finished, just installing permissions or something, but I was able to press next.
After rebooting, it started the stock android boot animation, got to the upgrading applications screen, after the applications were done "optimizing" it went back into the stock android boot animation. It never came out of it.
I'm confused as to what I am doing wrong.. I've flashed ROMs multiple times and I thought this one would be the easiest out of all of them considering I didn't care about the data on it and I'm just playing around.
Any help would be appreciated. Thanks!
Fixed.. I'm an idiot
GermanDoerksen said:
Hello all,
I realize you all are busy but I'm at my wits end here. I installed my bootloader and recovery using afterOTA. This worked really well, I installed Thor 1.7.3 recovery and ICS V8 bootloader using the utility. I then booted into recovery and did a factory reset (really), reset cache and dalvik, battery settings as well... I then went to install ZIP (JB 4.1.2 CM10-FLEX v6supercharged_Aroma-Rev3.4) from internal storage (download folder). I customized the ROM then went back and installed the random apps...
After this was done I hit next and installed the ROM. It didn't take as long as I thought it would, and I hit reboot when it was done, but came to a screen that I could press next on. The installer screen said it was installing permissions, it didn't say that it was completely finished, just installing permissions or something, but I was able to press next.
After rebooting, it started the stock android boot animation, got to the upgrading applications screen, after the applications were done "optimizing" it went back into the stock android boot animation. It never came out of it.
I'm confused as to what I am doing wrong.. I've flashed ROMs multiple times and I thought this one would be the easiest out of all of them considering I didn't care about the data on it and I'm just playing around.
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
Well, I kept working on it and I think I was just impatient. Maybe. Either way I went back and tried to reflash several times, doing the wipes from the wipe screen each time. No luck. Eventually I went and formatted the /system /data and all the other options in the mount/storage menu. I then did all the "wipes" again and reflashed. It worked this time! Running incredibly smoothly.
Thanks for reading everyone.