Database Users

Hard-SPL - or How to Not Brick your Phone DOWNLOAD HERE, FLASHING LIGHTS!

MOD WARNING: There are reports of this damaging phones, DO NOT USE until a fix is provided.
Further edit:
A member has reported :
"those with a SPL lower than 4.0.0.0 or something like that gets bricked. I just wanted to get this first post edited to reflect that so that people don't keep bricking their phones."
(Moderator: whether this is accurate or not I do not know - but use your own discretion)2nd Jan 2008
Hard-SPL for Herald is released!
if you somehow manage to kill your phone in the process of doing this then tough, it's not my fault.
once the SPL is on, it will protect itself from being overwritten.
the SPL is hardcoded to allow unsigned code and ignore your CID.
someone reported it somehow simunlocked their device after flashing an HTC brand ROM which is possible, but I doubt it.
When flashing, the RUU will go to 100% and your device will restart but the RUU will give an error; ignore this and close the RUU. to confirm, just reset into bootloader and check the version
PLEASE NOTE: THE DEVICE MUST BE SYNCED WITH ACTIVESYNC, DO NOT PUT THE DEVICE IN BOOTLOADER MODE MANUALLY

Olipro
Differences g4 and h3 only for IPL.
SPL one for all chip.
USPL for Herald is made but is not published while.
Ask pof.
While we prepare new version - SPL and haret in one file.
Much problems when files apart -see thread USPL for Artemis and ELF.

the device has a DoC, so you can read/write it with the appropriate pdoc tools.
any takers?

sorry mate am quite busy atm, although if there aren't any volunteers in the immediate future I am sure I could work something out with some instructions
cheers

Here's the beta version of USPL for herald, I did it a while ago but received few feedback: only 1 wing user (Paul from modaco) reported it working.
As beta, this does not flash SPL on device, to use just put the NBH you want to flash on the RUU folder and start herald-uspl.exe
Please report success or failure, remember it's beta, use at your own risk
I leave the final "Hard-SPL" version to you Olipro

pof said:
Here's the beta version of USPL for herald, I did it a while ago but received few feedback: only 1 wing user (Paul from modaco) reported it working.
As beta, this does not flash SPL on device, to use just put the NBH you want to flash on the RUU folder and start herald-uspl.exe
Please report success or failure, remember it's beta, use at your own risk
I leave the final "Hard-SPL" version to you Olipro
Click to expand...
Click to collapse
This is the method I used for installing the PDAVIET v14 Rom and have used it successfully twice with my Wing.

Olipro said:
the device has a DoC, so you can read/write it with the appropriate pdoc tools.
any takers?
Click to expand...
Click to collapse
I prefer more safe method flash - original.
The Original flash allows to avoid the many problems -a choice of the addresses, model DOC etc and more correct.
Also any developers can use uspl.nbh and select spl for use in their own ROM.
In any event you may take for base spl and use in your tools.

arc said:
I prefer more safe method flash - original.
The Original flash allows to avoid the many problems -a choice of the addresses, model DOC etc and more correct.
Also any developers can use uspl.nbh and select spl for use in their own ROM.
In any event you may take for base spl and use in your tools.
Click to expand...
Click to collapse
flashing a few hundred KB to the DOC is really not a bloody issue. and could you please explain what the sodding hell "original flash" means, since I would like to point out that the idea is to generate an SPL for the two separate DoC types.

pof said:
Here's the beta version of USPL for herald, I did it a while ago but received few feedback: only 1 wing user (Paul from modaco) reported it working.
As beta, this does not flash SPL on device, to use just put the NBH you want to flash on the RUU folder and start herald-uspl.exe
Please report success or failure, remember it's beta, use at your own risk
I leave the final "Hard-SPL" version to you Olipro
Click to expand...
Click to collapse
Thanks Pof !!!
Great tool !!!

You load corrected spl in RAM and jump to it.
Hereinafter usual flash through RUU.
Details to ask pof

arc said:
You load corrected spl in RAM and jump to it.
Hereinafter usual flash through RUU.
Details to ask pof
Click to expand...
Click to collapse
I've been speaking to pof, he put that post up for me in fact.
I looked at the file and noticed it contained haret, so I know exactly what the game is there.
I'll get an unpatched bootloader off pof and then deliver a bug-free patched SPL.

Olipro said:
I've been speaking to pof, he put that post up for me in fact.
I looked at the file and noticed it contained haret, so I know exactly what the game is there.
Click to expand...
Click to collapse
Yes .We presently have a more new program for loading and jump.

pof said:
Here's the beta version of USPL for herald, I did it a while ago but received few feedback: only 1 wing user (Paul from modaco) reported it working.
As beta, this does not flash SPL on device, to use just put the NBH you want to flash on the RUU folder and start herald-uspl.exe
Please report success or failure, remember it's beta, use at your own risk
I leave the final "Hard-SPL" version to you Olipro
Click to expand...
Click to collapse
POF,thanks to you,after I used your tool to flash my own ruu file,it really work.how successful you are.It work!!!!!
but I still have some question,
this beta still can't unbrick devices that bricked,since it have to work beyond activeSYNC,can you make it work under the bootloader.because they only can run on bootloader screen. many thanks to you.
thanks again.

arc said:
Yes .We presently have a more new program for loading and jump.
Click to expand...
Click to collapse
that's wonderful, but I need specifics

Olipro said:
that's wonderful, but I need specifics
Click to expand...
Click to collapse
I sent you spl (not patched ) .

bricked......
pof
Olipro
help with this.
I used pof's beta tool,I change wm6 to wm5,now....it brick.
last it unbrick since I only change the os.nb to ruu file.but this I change all to wm5 vision,
it only can go into bootloader.and ipl is 4.17.0002 spl is 1.09.0001!!!!!
it bricked.
I try offical ruu wm6,it doesn't work and displayed "This update utility cannot be used for your pda phone. please get newer update utility."
what can I do now?

Olipro, willing to help you if you could get me any info how to, I got the time

OK, I've created a patched ROM.
as I noted, it can be loaded with haret, so is anyone willing to test out 1.10.Olinex?

The Dutchman said:
Olipro, willing to help you if you could get me any info how to, I got the time
Click to expand...
Click to collapse
Got some time now also, just send us both pm's with some instructions and i'll test it out.
cheers

Olipro said:
OK, I've created a patched ROM.
as I noted, it can be loaded with haret, so is anyone willing to test out 1.10.Olinex?
Click to expand...
Click to collapse
Olinex GIVE me the rom,I would like to try since my herald was bricked.
[email protected] please send me one.

Pls, Help!!

I need help. I wanna flash my ROM, but in the half it stop and get my phone "offline". After restart(i try hardreset too) it freeze on "BIOS" boot screen. Can I do something with this problem at home? Or i have to go to the service???
P.S.: Sorry 4 my bad Eng

Hello!
Try to flash back to original WM5 ROM, from bootloader: http://forum.xda-developers.com/showthread.php?t=471490

Re:
There's a little bigger problem. I couldn't do this, because i couldn't establish connect with activesyns. my phone couldn't get started. He only freeze on boot screen when U can C
IPL 2.06
SPL 2.06.0000
GSM 02.19.21
OS 6.1.0.0
Nothing more!!!!!!!!!!!
He freeze at this. Do U understand?
Is there anything else to do?

First: Never flash a ROM if you don't know how to get back if it fails. But I'LL help. You have to press the camerabutton while doing a softreset. You'll see a screen with three colours. Now connect your phone to your PC and flash a original ROM. That will work for sure. But you have to use XP.
And what too hell have you done that flashing of one of our cooked roms (Can see it cause of the OS Version) failed? And do you try to cook your own ROM? Because it seems so as you wrote you tried to flash your ROM.
Hope I could help

Re:
Yes, I tryed to cook my own ROM, but I'm lamma at this site. I couldn't find how to get it to my phone. Sorry.
And Thanks for your suggestion. I works Thank You very much.

If you have questions on how to cook a or flash a ROM right write me a PM I'll help. And if you want to publish it be sure you'll put credits to the people you took the ROM and so on from. Best is to ask first. For own (unpublick) use this is nessesary.
And now have fun with your ROM.
P.S. If you tried to cook WM6.5 forget to use an old XIP. You have to take a new one. But maybe Cyberdel and me will publish one this evening. Andf maybe kitchen too. But this is just a sideinfo.

Another problem
I've got to this situation again, but today I've got another problem. The baterry is charged, but phone don't wanna start. Is there any reason????

[REQ] Flashing Cooked ROMs from SD Card

HSPL is released by bepe here but there is limitation of flashing ROM from SD Card if the cooked ROM image includes SPL.
Now Question and Request:
I am wondering if SPL can be removed from cooked ROM image. If yes, I would suggest to ALL CHEFS to remove SPL from the ROM image, so that everyone can flash all cooked ROM from SD Card without overwriting HSPL.
Anyone, any idea?

gd.. so it wont create confuse

Guys, when I was clarifying in bepe's thread regarding this, I think it was only a NO, NO, with having stocked Roms in the SD card as Stocked Roms would contain the SPL package.
Cooked Roms don't have this thus SD flashing should be fine...
Can I have a chef please confirm this so that this confusion can be put to rest.

band27 said:
Guys, when I was clarifying in bepe's threading regarding this, I think it was only a NO, NO, with having stocked Roms in the SD card as Stocked Roms would contain the SPL package.
Cooked Roms don't have this thus SD flashing should be fine...
Can I have a chef please confirm this so that this confusion can be put to rest.
Click to expand...
Click to collapse
You may be right.
Yeah, it would be great to have some chef confirming this so that we feel safe when flashing cooked ROM from SD card.

Ok, I have confirmation from Xannytech, SPL's are included in chef's Rom so at this stage in the development......
NEVER FLASH YOUR DEVICE USING THE SD CARD UNLESS IT"S SPECIFIED BY THE CHEF THAT ITS SAFE TO DO SO..
CHEFS should mentioned on their First page as they usually do, the Best way to Flash their Rom.
Perhaps in the future Roms maybe SD Flash Friendly, but at this stage they are NOT. Well some are but not to make matters confusing, just simple use your PC-USB way of flashing.

band27 said:
Ok, I have confirmation from Xannytech, SPL's are included in chef's Rom so at this stage in the development......
NEVER FLASH YOUR DEVICE USING THE SD CARD UNLESS IT"S SPECIFIED BY THE CHEF THAT ITS SAFE TO DO SO..
CHEFS should mentioned on their First page as they usually do, the Best way to Flash their Rom.
Perhaps in the future Roms maybe SD Flash Friendly, but at this stage they are NOT. Well some are but not to make matters confusing, just simple use your PC-USB way of flashing.
Click to expand...
Click to collapse
I don't really understand why to include SPL.nb to custom ROM... I never see this in other phone model. I'll take a look to a part of actual ROM but I really don't understand. I think to have ONLY OS.nb and some time a RADIO.nb is sufficient (and less dangerous) [SPL flash can brick the device but not OS].
So I haven't coocked with new style kitchen (old-style coocking ) I'll take a look to this.

xvx45 said:
I don't really understand why to include SPL.nb to custom ROM... I never see this in other phone model. I'll take a look to a part of actual ROM but I really don't understand. I think to have ONLY OS.nb and some time a RADIO.nb is sufficient (and less dangerous) [SPL flash can brick the device but not OS].
So I haven't coocked with new style kitchen (old-style coocking ) I'll take a look to this.
Click to expand...
Click to collapse
Same for me, I wonder why one would include SPL.

Guys, I had flashed two ROMs (Topix 1.1.2 and SONE 1.1) from SD card without any problem. HSPL was not overwritten.
However, it would be very helpful for chef to mention if their ROM includes SPL in their post.

I still don't understand HOW TO FLASH FROM SD-CARD after i applied the HSPL patch?
I read the HSPL thread but i still don't know it. Help appreciated

Darkyy said:
I still don't understand HOW TO FLASH FROM SD-CARD after i applied the HSPL patch?
I read the HSPL thread but i still don't know it. Help appreciated
Click to expand...
Click to collapse
From [TUT] How to change from one official ROM to another:
6 (normal): Put your Favourite OFFICIAL Rom on the Leo
--a:Right click on your exampleOFFICIALrom.exe and Extract it to a folder
--b:From the extracted file locate RUU_signed.nbh and rename it LEOIMG.nbh
--c:Copy the LEOIMG.nbh file to your MicroSD card
--d: Make sure your phone is charged at least 80% then power it off
--e: Press and hold the VOLUME DOWN then Press POWER button
--f: A menu will appear select (usually the power button) to continue to write the ROM
--g:After 5-10 minutes the phone should tell you the ROM was successfully written and the bar is full. You can now press reset (the small Red button beside the battery, use a pen)
Click to expand...
Click to collapse
Instead of the official ROM, copy and rename the cooked ROM of your choice...
Cheers!
Rob

vichet007 said:
Guys, I had flashed two ROMs (Topix 1.1.2 and SONE 1.1) from SD card without any problem. HSPL was not overwritten.
However, it would be very helpful for chef to mention if their ROM includes SPL in their post.
Click to expand...
Click to collapse
Xanny's Rom does include the SPL but its just not any SPL that will impact the HARD SPL , it's the SPL that contains the 1.42.000 one that will override the HDSPL.

Well quite simply I dont understand the worry.
First off, always install HSPL just in case you dont have a goldcard.
Then always flash a cooked rom with SSPL and you will never have to worry about it!
problem solved.
And should you re-install a stock ROM either via HTC's website or stage 6 as posted, re-install HSPL again.
Problem solved.
And if you're really paranoid have a goldcard anyway

chris_ah1 said:
Well quite simply I dont understand the worry.
First off, always install HSPL just in case you dont have a goldcard.
Then always flash a cooked rom with SSPL and you will never have to worry about it!
problem solved.
And should you re-install a stock ROM either via HTC's website or stage 6 as posted, re-install HSPL again.
Problem solved.
And if you're really paranoid have a goldcard anyway
Click to expand...
Click to collapse
First off, Hard SPL is to be only done once.
Secondly, having Hard SPL and using SSPL is not only redundant but makes no sense.
Thirdly, just flashing using the Active Sync bottom line.
Forth, for Folks who want to flash via SD card, just do it and you can always check Bootloader after to see if you wiped out HDSPL. No biggy, just make sure your flash HDSPL over again for your next flash.
Still easier then using SSPL & Gold Card route.
Enough Said...

Firstly: But you will have to do HSPL more than once if you flash a stock ROM or a cooked ROM that overwrites HSPL? or do no cooked roms do that?
Secondly: I only thought that you should use SSPL just incase the cooked rom overwrote HSPL?
Thirdly: duh, yeah i didnt see the obvious. sorry.
Fourth: yeah, you're right - I was just thinking what if the ROM hosed the device lol and you werent able to re-install HSPL.
I could be totally wrong - never done this stuff before. just getting the technical stuff right first before i plow in with an actual device.
thanks for any tips.

Help!! Uninstall HARDSPL goes wrong.

Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"

I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps

mitja12 said:
I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps
Click to expand...
Click to collapse
Like I said. I have used a rom from official rom thread=) I also tryed the rom from htc.com with same resoult.
Can I uninstall a bad flash or something and start from the beginning ? Cuz now im stockt in my situation.

Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.

mitja12 said:
Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.
Click to expand...
Click to collapse
Okej! Sorry for missunderstanding. So the only way out is to try everyone ?
I was lucky to get the first released hd2 in my city, so i bett its a old one =)
Does it have to be the same language release to ?

In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.

or just to HTCs website and get it from there (assuming its not a vendor locked device)

mitja12 said:
In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.
Click to expand...
Click to collapse
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?

lovenvik said:
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?
Click to expand...
Click to collapse
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.

lovenvik said:
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.
Click to expand...
Click to collapse
does it freeze on the HTC splash screen?

djchubbs said:
does it freeze on the HTC splash screen?
Click to expand...
Click to collapse
Dont realy know what that its. But I press vol down and start bottom. Then the tri-colored screen shows up "bootloader" for about 1 second. Then i got this screen http://img405.imageshack.us/i/20090607028.jpg/
I have let it load for about 20min, then i gave up.

I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)

Its seems i also have a problem flashing a stock rom for warranty reasons.
I did the following steps:
1. Get an official stock rom. (in my case it would me a NLD ROm 1.48)
2. Put it on storage card en change to LEOIMG.nbh
3. Turn of phone, press volume down en power up unntil tri color screen apears.
4. Follow steps on sreen.
But. I dont get step 4. On step it says for 1 sec ''loading''. After that, it goes back to the trii colour HARDSPL screen.
Does anyone know what im doing wrong?
I tried two different SD cards. A 2 gb version and a 4 gb version (both from Scandisk formatted as FAT32)
Is there a way/possible to flash a stock rom using activesync?

zenkinz said:
I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)
Click to expand...
Click to collapse
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.

lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
hehe thats the same reason i want to sent my phone back.. its probably cost 213,- euro for me

You flashed it using the SD card method?
People with the same problem in this thread:
http://forum.xda-developers.com/showthread.php?t=630843
In post #64 fards helped XMOO get the device working again, only with SPL 2.07... maybe the rest of the thread provides more info or solutions. I didn't read any further.

lovenvik said:
Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"
Click to expand...
Click to collapse
why dont you try out from this thread ,it has videos to how uninstall hspl
http://forum.xda-developers.com/showthread.php?t=621930

lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x

EddyOS said:
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x
Click to expand...
Click to collapse
Okej. Thats not good Hope some one release a HSPL 2.xx then =) But now i can't even use my phone anymore.

(just to double check)when you boot to bootloader, what does it say next to spl?
if it says spl 2.x then the above posts are correct, and you are stuck with spl2 until hspl2 is released.
You CAN get your phone working again, even with spl 2.
You need a goldcard, and you can then flash the 2.x official rom which will at least get your phone working. Once it is working, you can then flash custom roms using sspl BUT ONLY roms based on the 2.x official rom, and you won't be able to change radios using sspl. The only way you can change your radio is flashing a 2.x official rom with the goldcard.

HTC Opal WM 6.1 WWE 1.35.720.2 Stock ROM

Hi All,
For those of you, who wants to go back to the WM 6.1 WWE 1.35.720.2 Stock ROM on the Viva, here it is...
This is the lastest english ROM that you can get from HTC. You may use this for warranty purpose or if you prefer going back to the stock ROM. This ROM has the Idea logo. The entire package was assembled from official HTC updates and has no customization/personalization at all. After applying this, you may want to use "stockspl" (see sticky thread) for warranty purpose.
Cheers!

thanks ddl.team but after flashing, it says: Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center.

Thank you ddl.team. After flashing, I receive the same message "Your OS isn't customized for your hardware."

me 2
HI I recive that message to, the big problem is that I can't install another ROM after this, I tried to flash hard spl 1 and 2 but it has no effect. Please give me a solution.

Okay. This ROM has the official Radio, IPL, SPL and Splash. If required, remove those using HTC ROM Image Editor and try to reflash. Make sure your SPL is 2.00.cmon (use HardSPL first). Then after flasing this, go back to stockspl.

ddl.team said:
Okay. This ROM has the official Radio, IPL, SPL and Splash. If required, remove those using HTC ROM Image Editor and try to reflash. Make sure your SPL is 2.00.cmon (use HardSPL first). Then after flasing this, go back to stockspl.
Click to expand...
Click to collapse
Hi. I tried as you said, but still no succes . Don't know what to try now.

no can do. thanks anyway.

1parsec said:
Hi. I tried as you said, but still no succes . Don't know what to try now.
Click to expand...
Click to collapse
TheRem said:
no can do. thanks anyway.
Click to expand...
Click to collapse
Even after removing ipl, stock radio etc it is not working for you both? It should work after removing it. I will try it later.

SPL
after I install this rom I can't Hard Spl again I'v tried with Opal_HardSPL_v2 and Opal_HardSPL_v1 there ar no working anymore, please give us a solution cuz now I can't instal another rom and with this my htc is useless.

SPL
The error from hard spl is 270 - the image file is corupted

is that rom really for TOUCH VIVA?

hi
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update

s_p_mudakuzha said:
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update
Click to expand...
Click to collapse
Thats an old rom, we have more latest 1.35.720.1

Originally Posted by s_p_mudakuzha
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm 4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update
Thats an old rom, we have more latest 1.35.720.1
Sorry Mr. Jagan actually i was replaying to mr.menix , He is having problem after flashing this rom.

Alright, no need to be sorry.

thanks
thanks but is not working, i'v broken my phone with this version ROM.

For people who have issues with this ROM, flash a different ROM using the method described in the thread "HOW TO: Flash ROMS via an SD Card to your Opal".
This ROM was dumped from an HTC Touch Viva T2223 and is 100% original and untouched. I am not sure why this is not working for some of you. I have flashed this on my Viva twice now without any issues.
After flashing this ROM, I get the following:
OBNL 1.57.0000
SPL 1.26.0000 (post applying stockspl; was 2.00.cmon before)
GSM 03.29.90
OS 1.35.0.0

jagan2 said:
Thats an old rom, we have more latest 1.35.720.1
Click to expand...
Click to collapse
Hi Jagan,
Where can i find the latest one? I mean 1.35.720.1.

ddl.team said:
OBNL 1.57.0000
SPL 1.26.0000 (post applying stockspl; was 2.00.cmon before)
GSM 03.29.90
OS 1.35.0.0
Click to expand...
Click to collapse
Cannot apply stockspl. SPL 2.00.cmon still remains. I guess that is the problem, but I don't know how to revert to SPL 1.26. I tried everything, but 2.00.cmon is still there .
Thank you anyway.

Tools to dump ROM
Sorry if I am posting in the wrong thread, but are there any tools to backup the original SPL and ROM before we start flashing the cooked ROMS? As with this any unknown issues can be ruled out in case if we need to revert back to the stock ROM.
Thanks in advance.