Related
hi to all...
i have a trinity in my hands that i had to change lcd...
after i change lcd i tested and seems to be working well..
but it wasn't... the first problem i saw that was when i turn on,it freezes at menu after about 1minute...
after some searches, i've flashed with olipro 1.20 (till here is fine), and then upgrade radio..no luck, because when i tried to do that, it won't pass from 0% at any time and any version of radio
after that i tried to upgrade the rom;but one note,every time i made the 3 color "trick", the olipro 1.20 disappear and i have to flash it again (i don't know if it is normal or not).
finaly, when i try to flash the rom, it freezes at 13%, in all times i tried
i don't know what to do more, if anyone have any ideia, i'll apreciate a lot some help..
many thanks in advance for the patience...
best regards
Have you SIM/CID unlocked it?
no,but if i install olipro, does it needed to unlock to flash the phone?
regards
i tried now to unlock...
but it seems that in both unlock methods,the phone should turn on wich is not the case
Try entering bootloader mode and flashing back an original rom, depending on your device. When successful, your device will boot normally and then you will be able to SIM/CID unlock it and follow the guides from here
http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
thank you for your reply...
one of the problems is that i don't know wich was the original rom...
now i'm trying the many roms i can..
is there any method to know what was the original rom?
regards
Isn't it branded? O2, Vodaphone, HTC?
Check the shipped roms http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
yes,is an htc...
one of the roms i tried, i could flash to the end (one of cooked one wma 6.1).
but the problem remains, when reaches the wma logo, it freezes
any sugestion?
regards
Try an official HTC rom
http://rapidshare.com/files/2296300...1_1_.23.405.2_103_6275_1.38.00.11_108_GPS.exe
thanks for the rom, but is the second one that freezes at 13% when installing
any more ideas?
regards
The only other thing I can think of, is that you have a bad SPL. Try the splxploit, see if something comes out. After the SPLXPLOIT, flash again Olipro's 1.20 and if everything goes well, try flashing a 6.1 rom.
http://forum.xda-developers.com/showthread.php?t=308691
i did that already :/
my thought is that the problem is in the flash memory..
i'll try to give hot air in the flash to see if solve the problem because i think is not software problem..
thanks for the help of you
That's what we are here for, isn't it? To help each other. It's a shame it didn't work. Hope you get it sorted.
To all Prophet users
I flashed this SPL in the belief that it would improve the quality of the phone, but since doing this it went completey bananas with the following faults.
1. would hardly ever power up.
2. when it did power up more often than not it either went into bootloader, hung on splash screen or on the windows screen.
3. had to keep hard reseting until it did work.
4. would lose programs at random.
5. unable to flash shipped NVID rom.
6. flashing hardSPL made no difference.
7. unable to unlock CID using lokiwiz2b.
8. flickering screen.
9. battery lasts about 10 hours if your lucky.
10. battery won't charge unless removed for about 20 minutes.
11. possibly lose Wifi.
12. can not downgrade SPL.
Basically avoid this SPL like the plague. It was intended for the Charmer and not the Prophet.
The only way I sorted it out in the end was to bin the motherboard. A bit drastic I know but luckily I had a spare.
If anyone does have a solution perhaps they would be kind enough to share thier knowledge as I believe a lot of users have had the same problems.
Same problem for me .........
in my case mobile doesn't start without a charger and after that i cant put it in Bootloader mode and can't even soft/hard reset the phone. after getting on phone works very slow and cant it flash also........ what to do ????? Pls if any one can help
thnx in advance........
simppleguy said:
Same problem for me .........
in my case mobile doesn't start without a charger and after that i cant put it in Bootloader mode and can't even soft/hard reset the phone. after getting on phone works very slow and cant it flash also........ what to do ????? Pls if any one can help
thnx in advance........
Click to expand...
Click to collapse
why would u flash a SPL version not supported for the prophets and not even recomplemented by our chiefs? and is the anyway to fix this problem aswell there was already a topic about this I think its a flash error as that SPL is not for our Device at all I dont know what to tell you but I remember a user said that he is working on a fix for this problem you can contact him and ask him if he had any luck he is here http://forum.xda-developers.com/showthread.php?t=512541 user Dixiesmu good luck
SPL 3.08
If you have a look at this post it might explain more
http://forum.xda-developers.com/showthread.php?t=316062
Or this may help. IT COULD BE THE ANSWER ?
http://omgili.com/jmp/.0rSU5LtMgx8S...H.EbP4QdmWUkuYRbmEO9s76nM2NMxOxQRVoFdMr5OOPE-
SPL 3.08
I have nearly sorted this out, but need one more piece to the puzzle.
Can someone please be kind enough to tell me where the IPL and SPL are stored on the phone.
Is it in the DOC or the External Rom
Thanks in advance
Please reply fast,, m awaiting it badly
SPL3.08
If you follow the second link in post 4 this gives you the info required and it does work.
Follow this link and download the ORANGE UK Rom.
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Put your phone into bootloader and flash HARDSpl then flash the no ID rom and then follow the information provided in post 4 2nd link.
It takes a few attempts but IT does work.
Many thanks to ASRDIAS for working this one out. I am still working on a better solution and will post when available.
wen will u post the other method????????
Dear Dixiesmu,
When will u Post better Solution?????????
Kinldy post it soon ....... i can't wait .... pls help
ur working on it or no????? pls reply.
Yes I am still on the case, but for the momment stay with the original solution as my prophet is in for repairs. Found out the hard way that kids, xmas, baths and prophets are not a healthy mixture
ok will wait for ur reply.
We need some beta testers here to make this stable.
Beta testing phase only for advanced users; don't want to explain how to flash a ship ROM using the original SPL to your device!
This is an easy way to flash unsigned OS images to the HD2. It should not void your warranty like HSPLs do, because it does not change your SPL. I know for a fact, that repair centers are advised to check the SPL version number on the device.
How safe is it?
We disabled SPL and Radio flashing, so it can only flash Splashes and OS images.
(To all hackers out there... don’t enable it! else you will BRICK your device)
Worst case is that you destroy your OS partition, in that case you must flash a ship ROM using the original SPL (Vol down on boot run ruu from PC )
We did our best to make it save, else we would not release it for public testing, but anyway, all on your own risk!
How to use it:
Download the SSPL_RUU.exe and put it into an empty folder
Add the RUU_signed.nbh that you want to flash to your device into the same folder
Connect the device to the PC, device must be running WM, not show the 3 color screen
Run SSPL_RUU.exe
Done, flashing should start!
*** Watch me doing it ***
... btw, my device is still working after using it over 100 times
Troubleshooting:
If you don’t see USB at the bottom of the device screen and the ruu showed a connection error, disconnect the device and connect it again... USB should be there now.
Then just run the SSPL_RUU.exe again, flashing will start now
If the flashing breaks before 100%, stay cool! ... Reset the device and go to Boot loader, then flash a ship rom to the device (Must be the right rom, with the right CID)
Don’t forget to report that it happened... after you flashed the original ROM back, you can try again.
It is possible, that sometimes the screen stays black for 15sec or more before the SSPL 3 color screen shows, if it takes too long, do reset and try again and please report that!!!!
"Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center", !!! Problem NOT related to this SSPL !!! ... this means that you flashed a region protected rom... flash back to a ship ROM for your device and stick to ROMs with your region ID... or patch them (You might have to remove the battery after flashing back, else it might not boot up)
Link:
Link: View attachment SSPL_RUU.zip
Thanks for testing!
cotulla and bepe
Attachment is being investigated for possible un-witting virus content.
EDIT: Our conclusion is that although Kaspersky throws up an alert, this is likely to be a false positive result. But use your own scanners as always with any download.
well done bro
Stuck thread !
Tom
Amazing job bepe!
And very nice to see you here!
Hi Bepe
thanks, it works.
with friendly greet
starbase64
nice bepe, thx
works flawless
Thank you mate, which custom rom are you using? I cannot find any ROM to download. Thanks..
Does this tool make goldcards "obsolete"? I know this tool doesnt flash radio but other than that? Is it possible to flash, say the 1.61, by simply drag'n drop the 1.61 firmware in the folder?
Bepe, it works fine for me..
If you get things go wrong with this, it's down to user error..
yep Bepe, when i got the Beta on Christmas Eve it flashed 1st time.....
well done guy's,
Spike
Where are you able to find cooked OS's for the HD2? I can't seems to find any... Only "soon to be released" ones...
pspbirte said:
Does this tool make goldcards "obsolete"? I know this tool doesnt flash radio but other than that? Is it possible to flash, say the 1.61, by simply drag'n drop the 1.61 firmware in the folder?
Click to expand...
Click to collapse
yes, it is possible to flash signed full roms too... it will just skip the SPL and Radio part and continue with flashing the other parts
this is public testing... so make sure you have an original rom with the right CID for the worst case
For rom cooks thats very important ... when cooking roms it's possible that the OS does not boot up or that USB does not work...
... SSPL needs a working OS to do it's job, so you need a way to flash your device without this SSPL
very nice ... will test later ...
fards said:
Bepe, it works fine for me..
If you get things go wrong with this, it's down to user error..
Click to expand...
Click to collapse
For me it is working perfectly too, but we had some timing problem on another device... I hope all is fixed now
PS, that other device is also still working! ... just flashed back an original rom
pspbirte said:
Where are you able to find cooked OS's for the HD2? I can't seems to find any... Only "soon to be released" ones...
Click to expand...
Click to collapse
was not possible to flash until now, so the cooks where not able to cook roms...
HAPPY COOKING!!!
Thanks bepe and all who helped!
seed_al said:
Thanks bepe and all who helped!
Click to expand...
Click to collapse
Cotulla, he is the guy who did most of it!
Thank's bepe
tested now and work well for me
Bepe, first thanks for your efforts. I just made a ROM and tried to flash but I got "Invalid Vendor ID" when tried to flash @ 1%.
Should the custom created ROM have anything special?
any cooked rom guys to test?
Thanks bepe and Cotulla,
it works perfect with my self cooked rom.
Tried with a now german 1.61 base - everything is fine.
Nice late christmas present
kindly regards
Anja31
Hello.
This is my first post, so please be kind to me!
I've spent the past few weeks trying to get my head around what to do in order to flash my HD2 which is on the t_mobile network
The original rom 1.43 i think is driving me crazy and I now dont care if I change the rom and it invalidates the warenty!
In order to HSPL I need to SPL first, but will my device allow this?
I've read through so many threads that I am completely confused and dont know which way to turn, never mind which thread to re-read.
Can someone point me to the sspl, HSPL to upgrade to 1.66
Thanks
Glyn
oh its the 512 version
you are over confusing yourself.
download hspl 2
instal it - choose whichever hspl you like (may as well go for 2.08.hspl)
flash whatever rom you like from usb. (don't forget to flash a compatible radio either before or straight after.)
Thanks for your reply......
so downloan the HSPL from here?
'forum.xda-developers.com/showthread.php?t=609477'
and as I run the program I'll get the option of which version to install?
What should I look for to make sure that the radio is compatible with the rom?
Thanks again and sorry for my ignorance
Glyn
best thing you can do is to read a lot. No need to do enerything in one mad dash.
get HSPL2 from HERE - end of the first post (but read the post, dont just skip to download, )
run it as administrator (right click, run as administrator)
for best results use a usb port on the back of your PC (i.e one directly on teh motherboard, not an external usb slot) it will ask what version you want to install. just go for 2.08.hspl (not 2.08.0000) and let it do its thing. the authors say you should match the version to the rom (so 1.43.hspl for roms that are 1.43 or 1.48, 1.66.HSPL for 1.6 based roms, etc, but it isn't critical, most will run on any HSPL, so dont go changing every time you flash a new rom, no need. If it doesnt work then change it.)
As for radio tips, a radio with .51. in the number, (eg 2.09.51.03) will NOT work with any rom that has the 576meg ram, enabled.
If you flash a rom and all you get when you restart is a grey screen, chances are the radio doesnt match. Boot to bootloader and flash the radio.
But most of all, read stuff.
What about shipped rom's that are .exe files? Do they include radios with it? Also, is there a post you can point me to that has a list of compatible radios with different rom's?
that's where reading comes in. the whole process has so many variants that there is no simple "a b c" that covers everything.
yes the exe includes radio (and also spl if you use sd card to flash -stay away from sd card, use usb and if anything goes wrong you just boot to bootloader and re flash)
the chefs give you all the infoyou need in the first couple of posts. the sticky threads in the rom development section will tell you how to do everything, and any problem you encounter has beenwritten about already. so read,search and read.
I suggest you flash Stock WWE 1.66 ROM first so you can have a feel of how much improvement
has been done from 1.43
you can download it in HTC website.
Thanks for your help so far..
I would like to go for the 1.66 official ROM first, so I'll find that on here first and find the exe file so I dont have to mess about with compatible radio's.
Just before I HSPL it, I would like a copy of the original 1.43 T-Mobile ROM, so better get searching.
Thanks again
Glyn
the original 1.43 T-Mobile ROM is on HTCs website so get it from there as a backup
THANKYOU!!
Thankyou so much for your help and guidance.
Last night I decided to just do it - the phone was so poor I couldn't take it anymore.
3 hours from start of backing up, to installing HSPL2, to flashing with 1.66, anf then restoring data
I cant believe the transformation - I am so pleased I didnt throw it at a wall!!!
So a massive thanks to the members of this community
im in the same boat... got a stock uk hd2 on tmobile and wasn't to flash a new rom but the information is overwhelming and im scared I will flash a wrong rom and kill my phone :0)
Chivalryyyy said:
im in the same boat... got a stock uk hd2 on tmobile and wasn't to flash a new rom but the information is overwhelming and im scared I will flash a wrong rom and kill my phone :0)
Click to expand...
Click to collapse
theres nothing to it. the 'normal' hd2 which you do have, is about the safest phone to flash in the world today, with HSPL2. The 'radios killing phones' problem that started last week is specific to the t mobile US model only, , the one with 1 gig rom.
If you install HSPL on your phone, and then only flash over USB, the very worst that will happen (from a software point of view) is that the phone stops at a grey screen, and/or only boots into bootloader, so you boot into bootloader, you flash something else, and it's fixed.
The T Mo UK stock rom is available to download as backup, (as is o2 and voda for anyone looking) in the 'LEO official roms' thread in rom development, first post, first link, first folder (1.43)
At any time, you can flash that rom from sd card (look it up if you need to) and restore everything, spl, radio and rom, , to factory settings.
In all honesty, so long as you are careful, methodical, don't pull out USB cables halfway through, laptop battery dies, etc , then you are more likely to get bricked from some freak incident, like , umm, battery dieing, heh.
Fear not! be smart, be careful, try to understand what you are doing and why at each step, read up on what an spl is, and the job is , as they say, sorted.
RE: Please Help
rockthebus said:
Thankyou so much for your help and guidance.
Last night I decided to just do it - the phone was so poor I couldn't take it anymore.
3 hours from start of backing up, to installing HSPL2, to flashing with 1.66, anf then restoring data
I cant believe the transformation - I am so pleased I didnt throw it at a wall!!!
So a massive thanks to the members of this community
Click to expand...
Click to collapse
Hi Guys
Can you help me...
How do i back up the phone before adding HSPL?
is this neccesary and where do i get the stock rom copy from.
i got the phone this week and hate it in its present form... can't even watch youtube.
looking to update to avoid sending back
Regards
mkhonat
re:
samsamuel said:
theres nothing to it. the 'normal' hd2 which you do have, is about the safest phone to flash in the world today, with HSPL2. The 'radios killing phones' problem that started last week is specific to the t mobile US model only, , the one with 1 gig rom.
If you install HSPL on your phone, and then only flash over USB, the very worst that will happen (from a software point of view) is that the phone stops at a grey screen, and/or only boots into bootloader, so you boot into bootloader, you flash something else, and it's fixed.
The T Mo UK stock rom is available to download as backup, (as is o2 and voda for anyone looking) in the 'LEO official roms' thread in rom development, first post, first link, first folder (1.43)
At any time, you can flash that rom from sd card (look it up if you need to) and restore everything, spl, radio and rom, , to factory settings.
In all honesty, so long as you are careful, methodical, don't pull out USB cables halfway through, laptop battery dies, etc , then you are more likely to get bricked from some freak incident, like , umm, battery dieing, heh.
Fear not! be smart, be careful, try to understand what you are doing and why at each step, read up on what an spl is, and the job is , as they say, sorted.
Click to expand...
Click to collapse
Hi samsamuel,
Sorry to msg you like this.
i have purchased a T mobile HTC HD2 which came with the stock 1.43 ROM.
I want to put 1.66 on but don't know how.
I've read the forum and looked on youtube but confused.
Do you have an idiots guide?... i really am an idiot when it comes to stuff like this!
I have downloaded HSPL2 file.
I have downloaded the back up 1.43 Stock Rom
Do i need to download the 1.66 ROM now and how do i update?
please excuse my ignorance and i am happy to donate if you can help.
Kind regards
Mkhonat
RE:
Hi Samsamuel,
Thanks.. just one more thing.
Saw on youtube that i have to format my SC card
youtube.com/watch?v=nrmlqrfCvas[/url]
is this so and is this referring to the sd card in the HTC or my own sd card used to download the 1.66 onto?
regards
mkhonat
PS. why won't this forum allow me to send you a PM?.. i can't send any msg's at all.
Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!
prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.
Can you explain me? Please step by step... Thanks in advance
prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!
If you can't pay rent, I'm afraid I'll have to ask you vacate the area.
Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..
spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device
original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash
i have shipped original rom, still no luck
not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you
Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,
Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?
Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !
Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.