Database Users

HELP NEEDED Please - 8525 brick!

hello, i have read and read all the wiki's, but ive not been able to fix my phone.
i use a cingular 8525 (herm100) phone, and cannot install any rom on the phone. I have two versions of the At&t ROM with radio's and tried them both, but they all stop at 11-12 %.
i have tried usind the sd-card method, and it does not pass the "GSM - " portion.
i guess the radio is not working or is corrupt or something..
my phone is now in bootloader and just says
HERM100
IPL-1.04
HERM100
SPL-2.03
please any help will be appreciated. thank you!!!!

wow.. can anyone even say "sorry"
geez.. 35 views, and not even one reply, or consolation message, or anything??

I would update your copy of Windows Mobile Device Center first (especially if you're using Vista). Flash SPL and the radio, then flash any rom to see what happens. I mean really at this point, it's already a brick... try some crazy stuff, you can't hurt it anymore than it already is. I did the same thing to mine a couple of months ago, and after trying these things, I got it working again without a problem.

update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...

ultramag69 said:
update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...
Click to expand...
Click to collapse
Just to make sure I understand, the unlocker you linked is to SIM and CID unlock, correct ?? And then on top of that - you should update to HardSpl also ??
I have an 8525 on its way that I will be looking to upgrade - just want to make sure I am understanding correctly.

roomtek*8525 said:
geez.. 35 views, and not even one reply, or consolation message, or anything??
Click to expand...
Click to collapse
sorry for the late reply
i have been dealing with this for 3 days and finally managed to run official AT&T rom for 4 days wout hard reset.
there is a method dumping an official himalaya rom to hermes. az pof explained in one of his posts all commands except radio commands are different in himalaya so it is safe to use dumping method.
it basically deletes everything in radio rom so you can install official rom.
PS: at first install official rom stucked %12 i said damn but in second try %15 third try success
i am at work now i dont have the link of method but try googling or searching my posts (not too much )
i hope it solves your problem
bartan

thanks guys, i've tried some things
i have tried using Hard SPL v.7 it does not work.
i have tried using official cingular roms too. stops at 11% no success.
i have tried upgraing radio only, stops a 0% and restarts the device.
i have also used mtty, with some text inputs, no success
i have even tried selling the brick on e-bay .... as you can guess no success.!

bill_in_mtl, sorry bout lateness of my reply ( net problems), yes you do unlock sim and cid. Sim unlock means you can use ANY simcard from any carrier and Cid unlock means you can flash ANY hermes rom (both official or cooked). It needs to be unlocked first as the spl is downgraded to 1.40 (I think) and you should REALLY be running with 2.10 olipro (hard SPL ver 7). I wouldnt bother upgrading to Hard SPL ver 9 a this is essentially only ver 7 with some neat features for developers but it does throw up an error message when you finish flashing a rom(no problems t just feels like it).
Hard SPL WON'T stop you from bricking your phone BUT it will make it easier to recover.
roomtek*8525, sorry to hear that but have you tried flashing with a cooked rom? This unfortunately wont fix the phone part but you will have a working PDA...If you've tried MTTY with info 8 and task 2a commands then thats the best to hope for, Sorry bout that..

Please help - bricked XDA Orbit II

Hi, first post on the forum so please be gentle with me....
I have an XDA Orbit 2 which was until last Thursday working fine with the last official upgrade from O2 (Win 6.1, no idea about all the other stuff).
Whilst using the phone last week it suddenly died in the middle of a conversation. It wouldn't power on at all. I took out the battery, waited a couple of minutes, put the battery back in and switched it on. All that happened was the phone displayed the 4 colour screen with "POLA200 SPL-3.13.0000 CPLD-2" in the red section and "Serial" in the white. I repeated the battery removal exercise a few times, waiting for increasing lengths of time but nothing changed.
I had a fairly long search through the forum and have tried for a few hours now going through the various fixes suggested but I am getting nowhere.
It won't hard reset, all that happens is the message "No Image Found" appears for a very short time and I then get stuck on the 4 coloured screen with the message above.
The same thing happens if I try just putting the thing in bootloader mode.
I can't use any of the official O2 rom upgrades as the phone because all the PCs I've tried connecting to it won't recognise it over a USB link.
I've tried connecting to it using mtty, again on several PCs, but I just get a message "USB port can not open". Just in case I've uninstalled Activesync on one PC and got the same answer.
The "how to flash you polaris using the microSD card" originally looked useful but I have some problems with it.
The first is that I need HardSPL installing on the device, which I can't do because I can't get to it.
The second will be down to me not knowing where to look, but I can't find a ROM to download and copy to the microSD card as POLAIMG.nbh. I did manage to find a Win6.5 one (the HTC Polaris - PDaviet rom wm6.5 manilla 2d (core 23004) by tranminhman one) which I thought I'd try. I guess the idea was that if I could just get something working I could always reflash it again with a different ROM or maybe apply the o2 upgrade. Unfortunately the image was password protected and I couldn't find the password in the thread.
I'm kind of at a loss now so any help would be appreciated.
Cheers

Hey,
Sorry i can't help much you'll need to do a lot of reading and troubleshooting...usually it's the onyl way to solve it by trying all options.
I'm just posting this message to bump it up in this forum, but more importantly you should be posting in the Iolite section for help with that specific device especially if you're trying other ROMs.
Also if it died on you and you haven't begun to flash it, can't you send it to the service for them to fix it for you? That way you can rule out any hardware malfunction.
Best of luck!
Alan

Did you do soft reset

alanazar said:
Hey,
Sorry i can't help much you'll need to do a lot of reading and troubleshooting...usually it's the onyl way to solve it by trying all options.
I'm just posting this message to bump it up in this forum, but more importantly you should be posting in the Iolite section for help with that specific device especially if you're trying other ROMs.
Also if it died on you and you haven't begun to flash it, can't you send it to the service for them to fix it for you? That way you can rule out any hardware malfunction.
Best of luck!
Alan
Click to expand...
Click to collapse
Bit in bold er... cant quite understand why in iolite section as the xda orbit 2 is the rebrand htc touch cruise => htc touch find. Its in the right place.
On the side of what to do i the ony thing i can think of would be mtty and if that didnt work then try to reflash the official o2 6.1 release and see what happens when you try to do it.
You cant try to install any 3rd party roms they jsut wont flash as you dont have hard spl installed and cant do that until you have it running again.
Try the above and see what happens...

Hi Nik
I have tried just about every kind of reset, nothing has worked.

Hi Alan
If I can't get it sorted any other way I'll probably send it off somewhere but I'd like to have a go at fixing it myself. It will at least be a bit of fun!
I take then that I've posted this in the wrong forum. Oops, apologies.
Jon

You have not posted in the wrong forum look at my signature!

Hi jon,
Conclusion from post 1,
1) Uncompleted flash with new ROM or hardware problem (half way die)
2) Unsuccessful flash Hard SPL (cannot see Olinex 2.2 wording during bootloader)
3) Your PC & PDA fail to connect via USB (serial wording appear during bootloader)
Try this method,
1) Get shipped ROM from HTC web site, key in your country & serial behind battery
1a) Extract shipped ROM by WinRAR , take RUU Signed.nbh
2) Rename to POLAIMG.nbh put inside SD card, "flash using SD card"
3) Make sure your battery power more than 50% cause it take about 2 hours
Good luck, my friend
[Your request Password: TranMinhMan]

Nik Ahmad said:
Hi jon,
Conclusion from post 1,
1) Uncompleted flash with new ROM or hardware problem (half way die)
2) Unsuccessful flash Hard SPL (cannot see Olinex 2.2 wording during bootloader)
3) Your PC & PDA fail to connect via USB (serial wording appear during bootloader)
Try this method,
1) Get shipped ROM from HTC web site, key in your country & serial behind battery
2) Rename to POLAIMG.nbh put inside SD card, "flash using SD card"
3) Make sure your battery power more than 50% cause it take about 2 hours
Good luck, my friend
[Your request Password: TranMinhMan]
Click to expand...
Click to collapse
Thanks Nik
I've had a bit of a look round the HTC site and couldn't see a ROM to download so I've asked their technical support people if there's anywhere to download it.
Fingers crossed they'll help.
Jon

jonfsharp said:
Thanks Nik
I've had a bit of a look round the HTC site and couldn't see a ROM to download so I've asked their technical support people if there's anywhere to download it.
Fingers crossed they'll help.
Jon
Click to expand...
Click to collapse
Try to get official HTC ROM here, Select WWE (405) CID_001 for your country.
Good luck my friend

have u tried this?...
turn off, pull out the battery, then put it back, charge ur phone till the battery indicators shows green (which mean it's already fully charged) then... power on ur device.
it looks like a dumb suggestion , but... i have had a same situation
(HTC KAISER, not Polaris).
if it doesn't work, then try to upgrade with a POLAIMG.nbh (take it from official HTC ROM)
in a 2G FAT32 microSD root directory.

Nik Ahmad said:
Try to get official HTC ROM here, Select WWE (405) CID_001 for your country.
Good luck my friend
Click to expand...
Click to collapse
Thanks Nik
Much appreciated.
Downloaded the ROM as suggested, unzipped to the SD card, renamed the image to POLAIMG.nbh, stuck it in the phone and things got slightly more interesting.
In bootloader mode I now get a bit further. I get a grey screen which says "Loading ..." then "Checking...." then "00028002 Not allow". It then goes back to the four coloured screen as before.
However, does the fact that it is trying to read something mean that I have just got the wrong file?
I'll try a few more and see what happens.
Thanks once again, your help is greatly appreciated.
Jon

Hi oza
Yep tried all the battery pulling out stuff but got nowhere.
The ROM thing on the SD card gets further. I extracted the ROM from the official O2 upgrade, stuck it on the card and renamed it POLAIMG.nbh.
If I put the phone in Bootloader mode I now get even further than before. I get a grey screen with:-
POLAIMG.nbh -
RADIO_V2 -
BOOTLOADER -
SPLASH1 -
OS -
Press power button to start update image
Press action button to cancel update image
If I press the power button
I get an "Update In Progress" message and a progress bar.
After about 4 minutes I get a full progress bar and :-
POLAIMG.nbh - OK
RADIO_V2 - OK
BOOTLOADER - OK
SPLASH1 - OK
OS - OK
Update complete
UPDATE SUCCESS
And that's as far as I've got so far.
If I take the SD card out and try a hard reset I just get stuck on the 4 coloured screen I got before, but with no No Image Found message.
I get the same thing with bootloader mode and when I just remove the battery.
If I put the SD card back in I can go through the update process but I can't do anything
else.
So, have I actually made any progress? I'm not actually sure what I have updated and what state the phone is in at the moment. Is the fact that this didn't work an indication of a hardware failure and I should send it off somewhere.
Any advice on next steps would be good.
Jon

what is ur bootloader screen says now?
IPL...
SPL...

Before you can be helped you need to supply this information:
What rom were you using when it died?
What SPL are you using?
You used MITTY and fixes so I assume you're not a complete nunce and have hard spl on your phone, so on that assumption and ONLY if you have hard spl on your phone, try this:
If it isnt a hardware problem, then Its possible you have a dodgy radio flash issue - normally that would have been caused by a bad flash, but you indicated that this happened in use.
Provided it isnt a hardware, to fix this you need to either flash the radio (less reliable, but try it) rename the radio file to POLAIMG.nbh as directed before and stick on SD card.
The other thing to try is to flash a rom with a radio INCLUDED in it. Try and avoid fancy 6.5 beta roms and stick to 6.0 and 6.1 basic roms.
I believe Chavonbravo's VLIT roms come with the radio so try that. Its listed in the forum. I'm not providing links as I dont know what radio you were using and you really need to go for like to like or close. My preference is 1.59.44.02 radio rom if you find one.
Let us know how you do.
Lastly what radio and rom did you have?

Try this one M-AMINES if the radio you had was a 1.59.xx radio as it has the radio included.
if it was a 1.65.xx radio then try the VLIT naked rom.

oza_crazy said:
what is ur bootloader screen says now?
IPL...
SPL...
Click to expand...
Click to collapse
Hi Oza
Exactly the same as it did when it first broke. I get the 4 coloured screen with "POLA200 SPL-3.13.0000 CPLD-2" in the red section and "Serial" in the white.
No idea what the IPL is or was I'm afraid.
Jon

bally3 said:
Before you can be helped you need to supply this information:
What rom were you using when it died?
What SPL are you using?
You used MITTY and fixes so I assume you're not a complete nunce and have hard spl on your phone, so on that assumption and ONLY if you have hard spl on your phone, try this:
If it isnt a hardware problem, then Its possible you have a dodgy radio flash issue - normally that would have been caused by a bad flash, but you indicated that this happened in use.
Provided it isnt a hardware, to fix this you need to either flash the radio (less reliable, but try it) rename the radio file to POLAIMG.nbh as directed before and stick on SD card.
The other thing to try is to flash a rom with a radio INCLUDED in it. Try and avoid fancy 6.5 beta roms and stick to 6.0 and 6.1 basic roms.
I believe Chavonbravo's VLIT roms come with the radio so try that. Its listed in the forum. I'm not providing links as I dont know what radio you were using and you really need to go for like to like or close. My preference is 1.59.44.02 radio rom if you find one.
Let us know how you do.
Lastly what radio and rom did you have?
Click to expand...
Click to collapse
I've not been a big modifier in the past so it was just using the bog standard O2 software from the O2 website. The name of the file is "RUU_Polaris_O2_UK_3.13.206.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe" so I presume that there can be information gleaned about things like the SPL, ROM and radio versions?
Not a complete nunce, no, but so very far away from being comfortable with all this. This post was a result of a good few hours trawling through the forums looking for help. Anything I have done has been the result of a post on this site and I am very grateful that there are people willing to share their knowledge.
Anyway, as for hard spl, nope it isn't installed. I'd never needed anything like it before the phone died and now that it has died I can't get onto it to install anything.
Yes, this happened right in the middle of a conversation after a good year or so of normal day to day use. As I said, I haven't needed to make any changes to the phone so the only thing I've ever done is upgraded it with software from the O2 site.
I'm beginning to suspect that without Hard spl my options are very limited and pointing towards either sending it off for costly repairs or just binning the thing. I am probably wrong but I'm guessing that the fact that I don't have it installed is the reason why nothing is happening with the "Update in progress" stuff that is happening now.
Radio & ROM, as above. Whatever the O2 update provided. From the filename radio would be 1.59.42.15.
Many thanks
Jon

jonfsharp said:
I'm beginning to suspect that without Hard spl my options are very limited and pointing towards either sending it off for costly repairs or just binning the thing. I am probably wrong but I'm guessing that the fact that I don't have it installed is the reason why nothing is happening with the "Update in progress" stuff that is happening now.
Radio & ROM, as above. Whatever the O2 update provided. From the filename radio would be 1.59.42.15.
Many thanks
Jon
Click to expand...
Click to collapse
Well whatever you do dont bin it, we can always use it on the Android project if you decide to go that way.
Ok.. so lets see.. the phone is not picked up at all in windows?
If that is the case, if even a serial connection cant be made then theres issues. At this point, I would disregard all the other advice as it only applies to a hard spl device unfortunately. SD card flashing and all other radio rom flashing will only work with hard spl as far as I know - definitely safer for certain and you dont want to wreck a repairable device.
I take it, its not under warranty, for your mention of costly repair.
The important thing at this stage is a serial or usb connection from a Windows PC. I think I have heard of forcing this connection by opening the device but this would really be in the realms of profficient repairer or enthusiast.
I'll have a look but also do some searching yourself for making a connection to a Windows PC and forcing an SPL onto a phone.
I dont know whether anyone's ever managed to HardSPL a phone using a memory card? Just a thought...

Who would have known.. have a read of this and see if you can follow it up regarding the spl through sd card ..
http://forum.xda-developers.com/showpost.php?p=3273438&postcount=7

cant flash htc herald invalid certificate

im sooooo sorry i know i should use the search but i tried and that came up empty i downloaded a wm 6 rom that must be hard spl d but i did everything correctly but it was telling me "invalid certificate"
if its my sd then im kinda stuck cuz i only have my one sd so is there no ther way to flash it through hard spl
after it says invalid cert it show me the 3 colour background with
spl 5.04.0002
ipl 5.04.0000
this is the first time flashing my phone
plz plz plz help im extremly short on time and i have to finish this whole thing and do it properly before the end of the weekend any one who can help me much apreciated if there are any other details im leaving out just ask

1. Do not post any non-development threads on the development forum. This thread has been moved.
2. Your SPL shows that you still haven't HardSPL'd your phone. If you're getting an invalid certificate, you're doing something wrong. The HardSPL process bypasses the phone's certificate altogether. Which walkthrough are you following?
3. Your SPL is newer than the SPL used in HardSPL. Unfortunately, not many people use this newer SPL and therefore, most don't know much about that particular SPL and how HardSPL'ing will affect the phone.

sorry about the the post il try to prevent in the future
and im still a little confused i know i havent hard spl'd before this is my first time flashing i already downloaded the empty manilla gardeners edition from the wingster
and i renamed the file to HERAIMG.nbh but im still stuck plz help just wanna get this phone back in the future still stuck in the past
if there is anything i need to do please be very specific on how to get the hard spl up and running so i can flash and finish this
this is my only phone also using for xda thats why i need to do it once off so i can be sure it will work so i can surf the internet again

come on its either u all went to sleep or ur just ignoring me plz people help me tonight i will only be able to check back on sunday

tech freak said:
come on its either u all went to sleep or ur just ignoring me plz people help me tonight i will only be able to check back on sunday
Click to expand...
Click to collapse
Nex time, please be patient.
I was at work all day long but took time while still busy at work to answer what I have answered so far. Other are sleeping because of their time zone. Many just don't know the answer. We're not just ignoring you.

oh hey sorry i was just a little too hasty my patience was killing me that day but ill be patient i guess ill wait a while and see what comes on the post

the problem goes on
does anyone think it will be possible to find an official version of wm6 for herald that will work for spl
(no hardspl) cuz i tried an ruu but it told me to go away

Some help for beginner

Dear all,
First of all, many congratulations for the great forum and thanks for all the support given here.
Now, I recognise that problems similar to mine have been discussed elsewhere, so I apologise for opening a new post, however with all the material that I could find, I got a little bit lost, so here is the story.
Some 5 days ago, the screen on my HTC Elf stopped responding to any sort of touch. The green, red and action buttons were working but no touch screen.
I have read several posts, and concluded that one possible problem was a corrupted ROM, so I downloaded latest Onyx ROM and installed it. Phone was upgraded successfully and screen started to work again.
However, the first time I switched it off and then turned it on again, it did not boot up. It gets to the point where it displays Smart Mobility and then switches itself off. The orange light then comes on for about 6-7 seconds, then off for 1-2 seconds, and then on again......
Now it does not seem to be able to charge, but if I switch it on with the camera button on I am able to get to the ROM screen (the 'rainbow screen'), so I have hope that it is not dead.
What can I do to attempt to revive the phone please? Is there a sort of 'format' that can be given so that one can start flashing ROM, etc. from scratch?
Many thanks.
PS: Except for the above, I consider myself as a total beginner in this area.

Hearing that the touchscreen started working again after flashing the ROM, I would conclude it's a software-issue.
In the rainbow-screen, what SPL does your phone run? If it ends with 'cmon', you've installed HardSPL. That means you can flash your phone from the rainbow-screen. Given that your phone won't boot, you should try to flash a new ROM from the rainbow-screen. But first, you have to confirm that you've installed HardSPL.
Good luck!

@mrqips - many thanks for your reply.
The screen says that:
IPL 2.20.0002
SPL 1.11.0000

xumiking said:
@mrqips - many thanks for your reply.
The screen says that:
IPL 2.20.0002
SPL 1.11.0000
Click to expand...
Click to collapse
Sorry Buddy.. It seems that you didn't use HardSPL, unfortunately you won't be able to flash any other ROMs..
Yet.. You might be able to use the Gold Card Method.. Give it a try and see what would happen..
Another point is.. I'm very interested to know how did you flash Onyx ROM.. without using HardSPL nor USPL (as obvious from your IPL), I would say that you used the "White Screen Method" which is by the way.. the least safest way..
Hope That Helped...

Thanks for your feedback.
Actually, I happened to be reading the post by @sbettencourt in this thread:
http://forum.xda-developers.com/showthread.php?t=595856&highlight=smart+mobility
Here, a step-by-step approach is given to recover the phone:
"1º [PRJ] Unbricker ROM discovered (wildcard CID and Model ID)
2º Pick any shipped ROM from this thread:
If you have one P3450 -> here
If you have one P3452 -> here
After this, with luck and good work you recover the phone...
3º Then you must do CID_Unlock... You can search how to do it on Wiki or if you want i got one steps how to do it right here and you can see one video with cid_unlock on my signature..." (pasted from the thread)
I did Step 1, and updated it with the unbricker ROM using romupdateutility, and the phone was recovered! It could load, get to Windows Mobile, etc.
Then, unfortunately, when I did Step 2 (mine is a P3450) so I downloaded a ROM from the page indicated, I tried to update the shipped ROM using romupdateutility, but as soon as it got to 2% it failed saying that the vender ID is invalid.
Now, I don't seem to be able to update it with anything - not even the unbrick ROM. What a shame I almost go there.....

xumiking said:
I tried to update the shipped ROM using romupdateutility, but as soon as it got to 2% it failed saying that the vender ID is invalid.
Click to expand...
Click to collapse
You put the shipped ROM in the same folder with RUU??? Why??? You don't need to do that...
You only need to double click on shipped ROM and the installation process begins...

@sbettencourt,
actually yes what I did was to click on the update directly.
I downloaded the file RUU_Elfin_DOPODASIA_WWE_2.20.707.1R_4.1.13.51_03.07.90_RED_Ship_Reduced.exe and executed that directly.
However, now, even this one is stopping at 2%.
Is there any hope, or have I destroyed the phone?
Thanks.

If you can't flash the Shipped ROM, you have now to try the Gold Card... Follow the steps in that Gold Card thread...

Hello everyone,
I finally managed to revive the device, by flashing it with a 'correct' shipped ROM, which did not give any errors on updating. Big thanks for all your support - you are the best!
As this starts to get addictive, and because I am now running a ROM version which dates to 12/11/2007 (2.27.468.1B WWE), what are the suggestions for upgrading the ROM please? My device is an ELF0100.
Thanks again.

Coool Now try to keep him alive

Very true
I managed to flash it with Onyx Ultimate 4.8 (10/07/2009) and it seems to be performing splendidly.
Thanks for all your help.

Good Job

[q] htc elf bricked showing tri colour

hi
I have got a bricked HTC ELF with a tri-colour screen.(red, green and blue). I did try matty.exe and found that cid is locked. g_cKeyCardSecurityLevel = FF
I dont have the original firmaware backed up. and could not find anywhere on this site and internet.
device id: ELF010050
cid: HTC E11
IPL 1.17.002
SPL: 1.17.0000
Is there any way to find the original rom or is there any way to unlock the cid and then just put any rom on it? I dont have the working pda or wm device to do goldcard method. I know there is way to do the goldcard method without the WM device but then I need a desktop or laptop with a PCI or internal cardreader installed whereas I have got a usb card reader.
can usb card reader do the goldcard method without the wm device?
any suggestion will be appreciated since it has been almost 3 years for me to get my device back to life.
regards
plz suggest.
regards

Hi mate,
All info you need is in the stickies and /or using search function. You need to unlock cid and flash custom rom. BTW tri-colour screen is called Bootloader.
Ps: there was no reason to open a new thread for that ...

hi
thanx for the reply
I have been reading the stickies but could not find
the specific soultion for my problem. can u send me a link or step by step instruction?
regards

Moved to general as this does not belong in development.
There's no need for a step by step guide, all the information is in the wiki or stickies.

hi
I have runout of options and tried almost all. still no success. I was asked to
read stickies which I did but still no use.
no one seems to be answering the question. haha
anyway I have not given up hope.
regards

Yea!! That's the spirit

I can answer to the card reader: as far as I know it has to be an on board reader, otherwise it masks/hides something with the cardid.

hi
hmmm. so that means cardreader option has gone too. haha.
anyway thanx for letting me know that.
so the only option left for me is too wait for someone to send the original
rom so that I can download it and put on my HTC P3450.
regard

I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!

captainstu72 said:
I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!
Click to expand...
Click to collapse
What's the damage if he tries all the roms, one after the other ? If there's none, gogagogi might get lucky

His phone is still CID locked. I guess it could potentially be a brick. I think, that or it won't let you flash the rom at all. I forget which - been a while!
gogagogi: Have you tried seeing if you can flash ipl/spl from SD card - never been in the position you're in so just curious.

Hi
yes it is cid locked. I did try to flash few stock roms which I thought similar to the rom I have got
on my device through usb data cable but no luck. after 2% or 3% is says invalid vendor ID. then I tried through micro sd card but same result.
then I tried unbricker rom through usb and micro sd card but same result.
even I tried to change the vendor id through a softerare called xvi32. that is
a hex reader. open the .nbh file and change the vendor id but the result was no good. it said " the file or image has been corrupted"
and I never tried to flash ipl and spl.
regards

can you give the IPL/USPL a go to see what happens? (its a link to it for you)
Also, whats was your opertor, not sure if i missed it.

hi
when I bought it, it was on T-mobile. but it was sim free. thanx for the link.
I will have a look.
regards

t-mobile uk sorry or something else?

hi
it was on T-mobile NL.(netherlands).
I did have a look at the link u sent it to me.
after reading it, I found out that Microsoft ActiveSYnc has to be green first.(connected).
whereas it can not be connected, if the device is stuck on bootloader so this option has gone too.
the only option so far is, either I find out the original rom or if I can find out some matty.exe commands which can help me unlock the CID so that I can put any rom.
matty.exe is working fine so far.
so what do u think?
regards

gogagogi:
I don't appreciate the message you have sent to my personal in box to be honest, You're lucky I am replying to you at all!
When in bootloader does it say RUU at the top right? And does it pick up USB connection? Have you tried to flash via SDCARD the IPL/SPL roms?
I have a job, a daughter, and a live out side of XDA. If I do not reply to a thread, it means I am thinking, have missed it by accident, or am simply just too busy. I do not get paid to be here, I am not a moderator, I am just a member like yourself, I do not expect to get private messages hassling me to reply to a thread.
The Elf isnt even my main device. I use a HTC Hero (Android), and have done for quite a long time now. I look in here simply to help out other people who are still using this device.
Thanks, Stu

well it does say ruu text at the right top corner and it does say usb at the bottom.
as I said it does connect through Matty.exe.
well I did not mean to disturb you. I was just wondering cuz u were replying me before and then just stopped.
so mate you just chill.
ignore any previous questions from me.
regards

OKay, as the ruu is there, you should still be able to flash a from that point - I have done this a fair few times.
Have you tried the IPL/SPL yet?