im sooooo sorry i know i should use the search but i tried and that came up empty i downloaded a wm 6 rom that must be hard spl d but i did everything correctly but it was telling me "invalid certificate"
if its my sd then im kinda stuck cuz i only have my one sd so is there no ther way to flash it through hard spl
after it says invalid cert it show me the 3 colour background with
spl 5.04.0002
ipl 5.04.0000
this is the first time flashing my phone
plz plz plz help im extremly short on time and i have to finish this whole thing and do it properly before the end of the weekend any one who can help me much apreciated if there are any other details im leaving out just ask
1. Do not post any non-development threads on the development forum. This thread has been moved.
2. Your SPL shows that you still haven't HardSPL'd your phone. If you're getting an invalid certificate, you're doing something wrong. The HardSPL process bypasses the phone's certificate altogether. Which walkthrough are you following?
3. Your SPL is newer than the SPL used in HardSPL. Unfortunately, not many people use this newer SPL and therefore, most don't know much about that particular SPL and how HardSPL'ing will affect the phone.
sorry about the the post il try to prevent in the future
and im still a little confused i know i havent hard spl'd before this is my first time flashing i already downloaded the empty manilla gardeners edition from the wingster
and i renamed the file to HERAIMG.nbh but im still stuck plz help just wanna get this phone back in the future still stuck in the past
if there is anything i need to do please be very specific on how to get the hard spl up and running so i can flash and finish this
this is my only phone also using for xda thats why i need to do it once off so i can be sure it will work so i can surf the internet again
come on its either u all went to sleep or ur just ignoring me plz people help me tonight i will only be able to check back on sunday
tech freak said:
come on its either u all went to sleep or ur just ignoring me plz people help me tonight i will only be able to check back on sunday
Click to expand...
Click to collapse
Nex time, please be patient.
I was at work all day long but took time while still busy at work to answer what I have answered so far. Other are sleeping because of their time zone. Many just don't know the answer. We're not just ignoring you.
oh hey sorry i was just a little too hasty my patience was killing me that day but ill be patient i guess ill wait a while and see what comes on the post
the problem goes on
does anyone think it will be possible to find an official version of wm6 for herald that will work for spl
(no hardspl) cuz i tried an ruu but it told me to go away
Related
I've went through a process to basically reset my phone... Using the Titan unlocker... Then discontinued the customiztion... Had to reboot in 3 seconds before it started installing anything..
Now heres the problem... Im a noob at this basically... I'm learning..
My Bootloader right now is SPL 2.09.... Im stuck at this point.. What am I suppose to do? Update the SPL to nueSPL2.47 with the exe provided on this site? I don't know if I installed a radio. BEcause I tried to install one, and I had the TITAIMG.nbl on the root of the mogul main memory and when I boot to the rainbow screen it says Image not found.
I want to put that I-phone theme on my phone, and some other apps... I just purchased my phone yesterday..
Can someone please help me..
Most help I can give you: http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
Also, make sure your card is formatted correctly. Try using HP Format Utility or I think nue has one, but I can't think of it off the top of my head.
Yea you need to have either SPL 2.40.Olipro or HardSPL2.47, just do some searching in the lick posted above or in the titan upgrading forum
Does the Radio 3.35.4 have GPS?
Should I update?
If so.. Im going to have to reflash again and lose all my stuff huh?
Ugh... lol...
In urgent help I was updating my herald to NEW Simply Everything 6.5.1 Build 23420 when the update got stuck on 28% and then got error image corrupt. my herald restarted in bootloader mode and since its been like this my IPL AND SPL ARE 4.17. Please someone help. i will be really thankfull to you guys if you can give me an easy way out. i really dont want to do the goldcard thing again as its really difficult to get other WM phone to write the security thing in the memory card. at the moment any rom well do i just sold my other phone and the same day this happen so i dont have any phone. please help
Have you got a Herald or a T-Mobile Wing? If you have a Wing, just go into bootloader and install the T-Mobile ROM. Seems to me like you didn't HardSPL before you tried to upgrade. If you have a Herald then I am not sure what to tell you to be honest:/
ebel said:
In urgent help I was updating my herald to NEW Simply Everything 6.5.1 Build 23420 when the update got stuck on 28% and then got error image corrupt. my herald restarted in bootloader mode and since its been like this my IPL AND SPL ARE 4.17. Please someone help. i will be really thankfull to you guys if you can give me an easy way out. i really dont want to do the goldcard thing again as its really difficult to get other WM phone to write the security thing in the memory card. at the moment any rom well do i just sold my other phone and the same day this happen so i dont have any phone. please help
Click to expand...
Click to collapse
You should be able to flash while being in that mode.
Connect the phone through USB, and try flashing again. Try flashing to a different ROM, if necessary.
Well i have a HTC P4350 so i guess it Herald. well and yes i didnt Hardspl it's my bad was just too happy that i could update to the coustomised roms that u briliant guys are making here, but i have flashed like so many roms wm 6.1 to now adays the latest wm 6.5.1. but this never really happened. yes i am able to start the RUU it checks the device the when i click update it goes to either 2% or 3% and thats it gives me the image corrupt error.
ebel said:
Well i have a HTC P4350 so i guess it Herald. well and yes i didnt Hardspl it's my bad was just too happy that i could update to the coustomised roms that u briliant guys are making here, but i have flashed like so many roms wm 6.1 to now adays the latest wm 6.5.1. but this never really happened. yes i am able to start the RUU it checks the device the when i click update it goes to either 2% or 3% and thats it gives me the image corrupt error.
Click to expand...
Click to collapse
Yea, it means that you're trying to flash a ROM that requires you to be HardSPLed and flashed through SD Card, since the .NBH file is too small to be flashed through PC.
Either HardSPL your phone and follow the instructions for flashing through SD, OR find another ROM that doesn't require you to flash through SD card.
i have tride many roms but they r doing the go to 1 or 2 percent and the device resets. i will be really thankfull if you can tell me which rom to use exactly
To all Prophet users
I flashed this SPL in the belief that it would improve the quality of the phone, but since doing this it went completey bananas with the following faults.
1. would hardly ever power up.
2. when it did power up more often than not it either went into bootloader, hung on splash screen or on the windows screen.
3. had to keep hard reseting until it did work.
4. would lose programs at random.
5. unable to flash shipped NVID rom.
6. flashing hardSPL made no difference.
7. unable to unlock CID using lokiwiz2b.
8. flickering screen.
9. battery lasts about 10 hours if your lucky.
10. battery won't charge unless removed for about 20 minutes.
11. possibly lose Wifi.
12. can not downgrade SPL.
Basically avoid this SPL like the plague. It was intended for the Charmer and not the Prophet.
The only way I sorted it out in the end was to bin the motherboard. A bit drastic I know but luckily I had a spare.
If anyone does have a solution perhaps they would be kind enough to share thier knowledge as I believe a lot of users have had the same problems.
Same problem for me .........
in my case mobile doesn't start without a charger and after that i cant put it in Bootloader mode and can't even soft/hard reset the phone. after getting on phone works very slow and cant it flash also........ what to do ????? Pls if any one can help
thnx in advance........
simppleguy said:
Same problem for me .........
in my case mobile doesn't start without a charger and after that i cant put it in Bootloader mode and can't even soft/hard reset the phone. after getting on phone works very slow and cant it flash also........ what to do ????? Pls if any one can help
thnx in advance........
Click to expand...
Click to collapse
why would u flash a SPL version not supported for the prophets and not even recomplemented by our chiefs? and is the anyway to fix this problem aswell there was already a topic about this I think its a flash error as that SPL is not for our Device at all I dont know what to tell you but I remember a user said that he is working on a fix for this problem you can contact him and ask him if he had any luck he is here http://forum.xda-developers.com/showthread.php?t=512541 user Dixiesmu good luck
SPL 3.08
If you have a look at this post it might explain more
http://forum.xda-developers.com/showthread.php?t=316062
Or this may help. IT COULD BE THE ANSWER ?
http://omgili.com/jmp/.0rSU5LtMgx8S...H.EbP4QdmWUkuYRbmEO9s76nM2NMxOxQRVoFdMr5OOPE-
SPL 3.08
I have nearly sorted this out, but need one more piece to the puzzle.
Can someone please be kind enough to tell me where the IPL and SPL are stored on the phone.
Is it in the DOC or the External Rom
Thanks in advance
Please reply fast,, m awaiting it badly
SPL3.08
If you follow the second link in post 4 this gives you the info required and it does work.
Follow this link and download the ORANGE UK Rom.
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Put your phone into bootloader and flash HARDSpl then flash the no ID rom and then follow the information provided in post 4 2nd link.
It takes a few attempts but IT does work.
Many thanks to ASRDIAS for working this one out. I am still working on a better solution and will post when available.
wen will u post the other method????????
Dear Dixiesmu,
When will u Post better Solution?????????
Kinldy post it soon ....... i can't wait .... pls help
ur working on it or no????? pls reply.
Yes I am still on the case, but for the momment stay with the original solution as my prophet is in for repairs. Found out the hard way that kids, xmas, baths and prophets are not a healthy mixture
ok will wait for ur reply.
Dear all,
First of all, many congratulations for the great forum and thanks for all the support given here.
Now, I recognise that problems similar to mine have been discussed elsewhere, so I apologise for opening a new post, however with all the material that I could find, I got a little bit lost, so here is the story.
Some 5 days ago, the screen on my HTC Elf stopped responding to any sort of touch. The green, red and action buttons were working but no touch screen.
I have read several posts, and concluded that one possible problem was a corrupted ROM, so I downloaded latest Onyx ROM and installed it. Phone was upgraded successfully and screen started to work again.
However, the first time I switched it off and then turned it on again, it did not boot up. It gets to the point where it displays Smart Mobility and then switches itself off. The orange light then comes on for about 6-7 seconds, then off for 1-2 seconds, and then on again......
Now it does not seem to be able to charge, but if I switch it on with the camera button on I am able to get to the ROM screen (the 'rainbow screen'), so I have hope that it is not dead.
What can I do to attempt to revive the phone please? Is there a sort of 'format' that can be given so that one can start flashing ROM, etc. from scratch?
Many thanks.
PS: Except for the above, I consider myself as a total beginner in this area.
Hearing that the touchscreen started working again after flashing the ROM, I would conclude it's a software-issue.
In the rainbow-screen, what SPL does your phone run? If it ends with 'cmon', you've installed HardSPL. That means you can flash your phone from the rainbow-screen. Given that your phone won't boot, you should try to flash a new ROM from the rainbow-screen. But first, you have to confirm that you've installed HardSPL.
Good luck!
@mrqips - many thanks for your reply.
The screen says that:
IPL 2.20.0002
SPL 1.11.0000
xumiking said:
@mrqips - many thanks for your reply.
The screen says that:
IPL 2.20.0002
SPL 1.11.0000
Click to expand...
Click to collapse
Sorry Buddy.. It seems that you didn't use HardSPL, unfortunately you won't be able to flash any other ROMs..
Yet.. You might be able to use the Gold Card Method.. Give it a try and see what would happen..
Another point is.. I'm very interested to know how did you flash Onyx ROM.. without using HardSPL nor USPL (as obvious from your IPL), I would say that you used the "White Screen Method" which is by the way.. the least safest way..
Hope That Helped...
Thanks for your feedback.
Actually, I happened to be reading the post by @sbettencourt in this thread:
http://forum.xda-developers.com/showthread.php?t=595856&highlight=smart+mobility
Here, a step-by-step approach is given to recover the phone:
"1º [PRJ] Unbricker ROM discovered (wildcard CID and Model ID)
2º Pick any shipped ROM from this thread:
If you have one P3450 -> here
If you have one P3452 -> here
After this, with luck and good work you recover the phone...
3º Then you must do CID_Unlock... You can search how to do it on Wiki or if you want i got one steps how to do it right here and you can see one video with cid_unlock on my signature..." (pasted from the thread)
I did Step 1, and updated it with the unbricker ROM using romupdateutility, and the phone was recovered! It could load, get to Windows Mobile, etc.
Then, unfortunately, when I did Step 2 (mine is a P3450) so I downloaded a ROM from the page indicated, I tried to update the shipped ROM using romupdateutility, but as soon as it got to 2% it failed saying that the vender ID is invalid.
Now, I don't seem to be able to update it with anything - not even the unbrick ROM. What a shame I almost go there.....
xumiking said:
I tried to update the shipped ROM using romupdateutility, but as soon as it got to 2% it failed saying that the vender ID is invalid.
Click to expand...
Click to collapse
You put the shipped ROM in the same folder with RUU??? Why??? You don't need to do that...
You only need to double click on shipped ROM and the installation process begins...
@sbettencourt,
actually yes what I did was to click on the update directly.
I downloaded the file RUU_Elfin_DOPODASIA_WWE_2.20.707.1R_4.1.13.51_03.07.90_RED_Ship_Reduced.exe and executed that directly.
However, now, even this one is stopping at 2%.
Is there any hope, or have I destroyed the phone?
Thanks.
If you can't flash the Shipped ROM, you have now to try the Gold Card... Follow the steps in that Gold Card thread...
Hello everyone,
I finally managed to revive the device, by flashing it with a 'correct' shipped ROM, which did not give any errors on updating. Big thanks for all your support - you are the best!
As this starts to get addictive, and because I am now running a ROM version which dates to 12/11/2007 (2.27.468.1B WWE), what are the suggestions for upgrading the ROM please? My device is an ELF0100.
Thanks again.
Coool Now try to keep him alive
Very true
I managed to flash it with Onyx Ultimate 4.8 (10/07/2009) and it seems to be performing splendidly.
Thanks for all your help.
Good Job
hi
I have got a bricked HTC ELF with a tri-colour screen.(red, green and blue). I did try matty.exe and found that cid is locked. g_cKeyCardSecurityLevel = FF
I dont have the original firmaware backed up. and could not find anywhere on this site and internet.
device id: ELF010050
cid: HTC E11
IPL 1.17.002
SPL: 1.17.0000
Is there any way to find the original rom or is there any way to unlock the cid and then just put any rom on it? I dont have the working pda or wm device to do goldcard method. I know there is way to do the goldcard method without the WM device but then I need a desktop or laptop with a PCI or internal cardreader installed whereas I have got a usb card reader.
can usb card reader do the goldcard method without the wm device?
any suggestion will be appreciated since it has been almost 3 years for me to get my device back to life.
regards
plz suggest.
regards
Hi mate,
All info you need is in the stickies and /or using search function. You need to unlock cid and flash custom rom. BTW tri-colour screen is called Bootloader.
Ps: there was no reason to open a new thread for that ...
hi
thanx for the reply
I have been reading the stickies but could not find
the specific soultion for my problem. can u send me a link or step by step instruction?
regards
Moved to general as this does not belong in development.
There's no need for a step by step guide, all the information is in the wiki or stickies.
hi
I have runout of options and tried almost all. still no success. I was asked to
read stickies which I did but still no use.
no one seems to be answering the question. haha
anyway I have not given up hope.
regards
Yea!! That's the spirit
I can answer to the card reader: as far as I know it has to be an on board reader, otherwise it masks/hides something with the cardid.
hi
hmmm. so that means cardreader option has gone too. haha.
anyway thanx for letting me know that.
so the only option left for me is too wait for someone to send the original
rom so that I can download it and put on my HTC P3450.
regard
I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!
captainstu72 said:
I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!
Click to expand...
Click to collapse
What's the damage if he tries all the roms, one after the other ? If there's none, gogagogi might get lucky
His phone is still CID locked. I guess it could potentially be a brick. I think, that or it won't let you flash the rom at all. I forget which - been a while!
gogagogi: Have you tried seeing if you can flash ipl/spl from SD card - never been in the position you're in so just curious.
Hi
yes it is cid locked. I did try to flash few stock roms which I thought similar to the rom I have got
on my device through usb data cable but no luck. after 2% or 3% is says invalid vendor ID. then I tried through micro sd card but same result.
then I tried unbricker rom through usb and micro sd card but same result.
even I tried to change the vendor id through a softerare called xvi32. that is
a hex reader. open the .nbh file and change the vendor id but the result was no good. it said " the file or image has been corrupted"
and I never tried to flash ipl and spl.
regards
can you give the IPL/USPL a go to see what happens? (its a link to it for you)
Also, whats was your opertor, not sure if i missed it.
hi
when I bought it, it was on T-mobile. but it was sim free. thanx for the link.
I will have a look.
regards
t-mobile uk sorry or something else?
hi
it was on T-mobile NL.(netherlands).
I did have a look at the link u sent it to me.
after reading it, I found out that Microsoft ActiveSYnc has to be green first.(connected).
whereas it can not be connected, if the device is stuck on bootloader so this option has gone too.
the only option so far is, either I find out the original rom or if I can find out some matty.exe commands which can help me unlock the CID so that I can put any rom.
matty.exe is working fine so far.
so what do u think?
regards
gogagogi:
I don't appreciate the message you have sent to my personal in box to be honest, You're lucky I am replying to you at all!
When in bootloader does it say RUU at the top right? And does it pick up USB connection? Have you tried to flash via SDCARD the IPL/SPL roms?
I have a job, a daughter, and a live out side of XDA. If I do not reply to a thread, it means I am thinking, have missed it by accident, or am simply just too busy. I do not get paid to be here, I am not a moderator, I am just a member like yourself, I do not expect to get private messages hassling me to reply to a thread.
The Elf isnt even my main device. I use a HTC Hero (Android), and have done for quite a long time now. I look in here simply to help out other people who are still using this device.
Thanks, Stu
well it does say ruu text at the right top corner and it does say usb at the bottom.
as I said it does connect through Matty.exe.
well I did not mean to disturb you. I was just wondering cuz u were replying me before and then just stopped.
so mate you just chill.
ignore any previous questions from me.
regards
OKay, as the ruu is there, you should still be able to flash a from that point - I have done this a fair few times.
Have you tried the IPL/SPL yet?