Database Users

Sometimes I lost BT hardware.. well the s100 belive I do ..

Hi .. anyone have an idea.. ??
Or have same problem ?
I got a message saying that no BT hardware is installed on the phone.. when trying to enable it ..
A soft reset fix it.. .. but even if I dont touch the s100 it get this after some time.. any clue..
Hardware or software glitch ??
Regards Carlis

mine sometimes does this i just click the bt icon again and it works? :?

gazzaman2k said:
mine sometimes does this i just click the bt icon again and it works? :?
Click to expand...
Click to collapse
I notice that if I go in and remove klick in inbound BT port , shut down BT and restart it .. .. I can use BT again if I stop it ( well strange it was off.. ) and start it again ..
This got realy bad after the Qtek s100 update.. .. but was there before to..
Hope it not Hardware.. .. hate if I must send it away..
Carlis

Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter

I only have this problem when calender+ 2.2 is install. have not try the 2.3.

cpes said:
Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter
Click to expand...
Click to collapse
I have the same problem since updating. If I leave BT off for some time (hours?) and then try to reenable it I am told there is no bluetooth hardware. After a soft reset everything is ok.
Gonna call Brightpoint tomorrow.

thx.. guys... I even reflashed it to if it got bad under the upgrade... I will also call in the problem tomorrow... not to brightpoint.. as my was imported and uses Dangaard Telecom Swedens ver of the upgrade... same bug in both BT software...
Carlis
bamse said:
cpes said:
Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter
Click to expand...
Click to collapse
I have the same problem since updating. If I leave BT off for some time (hours?) and then try to reenable it I am told there is no bluetooth hardware. After a soft reset everything is ok.
Gonna call Brightpoint tomorrow.
Click to expand...
Click to collapse

Sent a mail to Swe Qtek support about it.. let U know what they say..
Carlis

I have the same problem..

I also have this problem (sometimes working, sometimes not working after soft reset), and also have Calendar+ 2.2.3 installed, now I removed it, let's see if it will happen again.

A way to get pass the new BT patch..
Hardreset
Softreset when Unit says its done after Screen align and timezone etc.... before the ExtRom load.
Install all cabs in the now visible External Rom folder exept the one named:
Default_Patch_bthusb.CAB .
You now have the old BT and all other is updated.
Or ..
Live with the new BT patch and do like this:
Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated.
Works 90% for me.
Carlis

Carlis:
I don't really understand what you are saying..
After upgrading (Dangaard update) I get the Error: "There is no Bluetooth hardware installed on this device." - as soon as I click the bottom icon in today-screen. Same if I try Bluetooth icon in Settings -> Connections -> Bluetooth.
How do I ;
"Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated. "
?
All help is very appreciated!

5 soft-resets later and my BT-module is working again. Strange ****.

Same thing here sometimes...
Hi everyone,
my Austrian T-Mobile MDA compact (original firmware, no "cross-update" or whatever) also has this problem sometimes. There where some resets too, when switching on the device after using a BT headset (turned BT on -> connected BT headset -> made call -> endet call -> switched MDA off, while headset was still on -> switched MDA on -> imediate "auto-softreset"). By now I haven't realised, what's the reason for it, but I will take care.
My guess at this moment: Something's wrong with handling of bluetooth headset connections or/and suspend handling.
I'm really asking myself who the f*ck is responsible for the fact, this beautiful little device is stuck with this crappy MS bluetooth stack (missing profiles, buggy like hell, etc.)...

I got tired with the bug and now I leave my BT on 24/7. My old habits of keeping my phone charged makes this ok for me.

I occasionally got this bug both before and after the upgrade to 1.06.
I simply switch off the power and on again. The bluetooth is the back. It works every time for me.

In setting.. U have 2 BT settings.. one for PORTS and one for manage devices and turning bt on and off.
activate a bt inbound port or outbound port under settings... system .. bluetooth settings.. to get bt back..
I now use Bluetooth switch by buzz_lightyear to manage the bt.. ,no more bt hardware error
Love this little soft.. Thank U Buzz.. !!!
Its even a huge + to use it .. soooo easy to enable and disable bt.. both in discover and hidden mode..
It can be found in the forum.. Even using hes replacing BT icons.. realy well looking..
Thx again Buzz..
pell0 said:
Carlis:
I don't really understand what you are saying..
After upgrading (Dangaard update) I get the Error: "There is no Bluetooth hardware installed on this device." - as soon as I click the bottom icon in today-screen. Same if I try Bluetooth icon in Settings -> Connections -> Bluetooth.
How do I ;
"Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated. "
?
All help is very appreciated!
Click to expand...
Click to collapse

Is there a fix?
hey all,
I get this intermittant problem too... probably because I leave bluetooth off 95% of the time.
My XDA 11 is running ROm 1.60.00WWE, with ExtROM version 1.60.44
Soft resets seem to make little difference.
Does anyone have a easy and comprehsible solution to restore the 'missing' Bluetooth hardware?
Thanks
tym

bt issue |2k3SE|

Hey when i try to enable my BT it says "There is no Bluetooth hardware instaled on this device."
What shall i do?

Mr-Sale said:
Hey when i try to enable my BT it says "There is no Bluetooth hardware instaled on this device."
What shall i do?
Click to expand...
Click to collapse
Go to your extended ROM >>> see if there is a BT.cab there, and of so run it. Otherwise you may have to reflash the ROM. Maybe others will advise differently.

Nope...that aint there... i searched a few extended rom compilations but couldnt find any BT.cab or similiar cab

BT
Mr-Sale said:
Nope...that aint there... i searched a few extended rom compilations but couldnt find any BT.cab or similiar cab
Click to expand...
Click to collapse
en
Given we are using the same ROM version (Sin's merged), then I think the drivers are there but it sounds as thought the icon (BT_Icon.cab in the ROM) may be missing. What you could do is download BTH Tools v.1010 from XDA-Developers ... I found it yesterday by doing a search. This is installed from a PC and may help you get it going. It is not a BT engine, merely a means of activating/deactivating BT and it shows which battery is in use as well.
I have a weird one as well in that my BT works well in connecting with a laptop computer, but when I use it with a Plantronics M3000 BT earpiece, I have to re-do the connection the hard way (i.e., pair the damn thing) after every time the XDA II is suspended. I don't think it is the Plantronics device (which is a piece of ****e in my experience) alone .... will sort it even if I have to buy a better BT earpiece. Maybe others have some advice??

TyTN Bluetooth Not Working

Please Help, my bluetooth isn't working. I can't turn it on from the comms manager or from bluetooth under settings/connections.
If I try to enable it then search for a new device I get the following error 'Problems with bluetooth hardware'.
I only got the Tytn today, bluetooth was working this morning but not now.
I've tried both soft and hard resets and it still doesn't work.

I had the same problem weeks ago with my CHT 9000 HT634F.
Changed with a HT633F, and Bluetooth works well.
So I guess it's hardware fault.

Just on the phone to HTC Tech Support, I'll let you know what they say

Aardvark1978 said:
Just on the phone to HTC Tech Support, I'll let you know what they say
Click to expand...
Click to collapse
Out of interest, why didnt you get a replacement from vodafone?

I was just checking it wasn't a software problem. It took the original supplier a week to get this one, so was trying to fix the problem without having to wait for a new one. Oh HTC say it's a hardware fault and gave me a repair centre number. Back to the original supplier i guess

[Help] bluetooth pairing problem

Hi to all,
I just bought a bluetooth headset adapter to use with my Leo.
When I try to pair it with my phone I got the screen saying.
"pairing.... waiting answer from the other peripheric"
and then
"An error occured while pairing, verify the other peripheric can be seen"
(i'm just translating from the italian scrren, so maybe the original phrase is different)
I tought it was a broken cheap headset, but when I tried with all other older computers and mobiles, they just pair in a second.
The problem (I suppose) is that while older mobiles use the four digits code pairing, the HD2 tries to authenticate in another way (just like my newer pc in which I don't have to put any code to pair with the headset, but the pairing is still working like a charm).
So I'm just wondering... Is there another software for bluetooth pairing that would let me use the 4-digits code, or a way to make windows use that pairing system and not the newer one, which doesn't work?
Some information:
ROM is Axlor v.3
Radio is 2.07
Bluetooth headset name is BTHS900-N
Thanks in advance and sorry for bad english

This should help...
http://forum.xda-developers.com/showthread.php?t=625372
Funily enough, it was the thread above yours in the forum.
Hope it helps mate

wow... Yesterday there wasn't that post... surely he heard my shouts yesterday and discovered that thing ahah
Thanks for the help

Mtk87 said:
wow... Yesterday there wasn't that post... surely he heard my shouts yesterday and discovered that thing ahah
Thanks for the help
Click to expand...
Click to collapse
No worries mate. It's a handy post for sure!

Adding the registry keys doesn't help, keep on saying the same message
Thanks anyway

Bluetooth BMW and HTC HD2

Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2

I have exactly the same issue. The HTC HD2 works ok for calls etc but the phone book upload is "please wait" forever. Very annoying. I have the standard up to date ROM and BMW X5 2009 model. Any help would be great.
Thanks
mrickenbach said:
Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2
Click to expand...
Click to collapse

So any ideas? Now we are already two you can make happy! Thanks

Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)

HD2_Noob said:
Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)
Click to expand...
Click to collapse
I have a 2008 BMW, and I did experience this the first time..I sat there waiting for a few mins adn then got bored...but after I had turned the car off, been away and come back..it transferred straightaway.
Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd

Works fine here with a BMW 5x from 2008.. Using miris 6.5.x ROM

Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd
Click to expand...
Click to collapse
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5

schrej said:
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5
Click to expand...
Click to collapse
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5

bmw
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )

zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Which ROM do you use 1.66? or earlier? With my earlier ROM I had no problems, but since I upgraded to 1.66 (German), the phonebook does not transfer...

Bluetooth auto control problem
I can’t control my bluetooth (on/off) when using Inesoft phone profiles/controls; I have also tried other programs but no success(in another program the window of bluetooth was disabled); through all programs, I could control phone, WIFI, and gprs but not the Bluetooth. The only way to turn the Bluetooth on/ off is the Comm Manager (Manually); could anyone help please. Thanks

2006 bmw
I use the latest 1.66 wwe rom off t he htc website with no problems at all .

zipolly said:
I use the latest 1.66 wwe rom off t he htc website with no problems at all .
Click to expand...
Click to collapse
thank you, I am glad it worked for you...you must have a newer generation ULF than me then.
Is your phone HD2? mine is Toshiba TG01..I have managed to make it work 50/50 of the times, but I do not know WHAT CHANGES are between it working and not working...it is very frustating to know (and experience it working) that it can/should work, but not being able to

I have a new HTC Mini HD and have the same problems with my 2009 BMW 3. BT Headset function works just fine, but iDrive keeps trying to sync the telephone book, unsuccesfull. Instead, my phone's battery gets drained. Anyone any sollutions?

Unfortunately I don't have an answer for your question, but it sounds like it might have something to do with the bluetooth stack used for that ROM/Radio not being recognized by the car. Perhaps the layer that deals with data transfer is removed. Sorry I can't be of more help here.
What I can do to help is to offer a warning. I am a former BMW Client Advisor, and have been told many, many times by service technicians that using phones which are not specifically approved by BMW can affect your car's ECU (brain) and if it needs to be repaired or replaced, it will not be covered under warranty. That could be just nonsense to force you into buying only phones which BMW has tested (or vendors have paid for a marketing fee), or it might be spot on, in which case you run a pretty big risk.
Hope this helps.

OK, problem solved. BMW updated my carsoftware to its newest version last week and now my HD2 works perfectly with my car (again). I can make calls AND my phonebook is synced as well.
Hint1: Try if your phonebook sync problem exists with the SIM contacts as well as with the phone contacts
Hint 2: worldwideweb.bmw.com/com/de/owners/navigation/bluetooth/compatibility_check_intro.html

a_petrov303 said:
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5
Click to expand...
Click to collapse
zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Hi All,
I have a BMW X5 2005 model. I can pair the phone OK but it constantly disconnects and reconnects once the transfer of the phonebook occurs. The phonebook transfers always start from scratch when this happens and nothing gets loaded to the car's phonebook.
If a call comes in, or if I make a call while it is connected (like within 5 seconds) the phone stays connected for the duration of the call.
I have tried all the Regisrty tweaks and none change the behaviour.
I also read it is because the HD2 uses Widcomm BT stack and not the MS BT Stack.
Zippolly and a_petrov303 and all those that have it working, can you please tell me which Rom you are using? I am using the latest Energy's 6.5.x rom. i noticed someone mentioned Miri's 6.5.x Rom works.
Thanks,
Rob

I have a 07 E60. The HD2 pairs fine, synchs contacts fine, but the sound quality is so bad it's not useable. Of course bmw says it's not a compatible phone, but I think there is a problem with the car as my Diamond won't find it, even though it is supposed to be supported

its mainly due to the car bluetooth, BMW etc don't make the car kit mostly siemens do and they are slow on the uptake of doing updates.

anybody found a snap-in for the hd2 yet?
I have a 7-series F01 and it is really annoying to have to deal with that usb cable...
Ontopic
I had the BT problem too, deleting the profile and repairing the phone did the trick for me...