vibration mode on blackstone doesn't work - Touch HD General

I installed the EnergyROM_28014_BLACKSTONE_17.Dec.2009: all seems working good, just one bug. When vibration mode is activated, after few second or display power off, the ringtone comes back to sound; the same happens if no sound is activated. This situation is not so funny during a meeting!!! I tried also the 21885 one, but the result was the same. Other roms, the stock one included, didn't have this problem. Is there anyone getting the same trouble?

The best thing you could do is to change to another rom,Since there are many .
I did try most of the Energy roms but never had this problem,but had other problems.
Good luck.

Related

HELP NEEDED!!! No Sound whatsoever

Hello,
i seriously need help.
Until this morning, my X1 worked. Over the last few days I was playing around a bit with various TF3D options, etc. I should note that I did not touch the ROM.
Then suddenly my phone gave no sound anymore.
No audible resonse to a stilus click on the screen.
No sound from FM radio.
No sound from phone (neither ring nor can I hear the caller).
(Vibra alarm works when activated though)
When switching to speakerphone I hear a very soft static crackle when doing the switch. Just as if the speaker is turned on. But then - no sound at all.
No microphone function on phone (caller cannot hear me).
No sound via headphones on phone.
No sound via headphones on MP3 playback.
Everything else appart from sound works. Even the phone can make a connection when calling - you just hear nothing.
I tried a soft reset. Nothing - still no sound.
Then I tried a hard reset:
Obviously the hardware of my speaker is ok. Because when I make a hard reset, there is the "pling" sound to inform me, that I should calibrate my screen.
Then there is another "pling" when the message appear, asking if I want to get the automatic provider settings updated.
But afterwards - no sound at all in the whole phone.
Then I went to update the ROM, thinking I might have (no idea how, but you never know) done something to audio drivers. I replaced my German T-Mobile ROM with the prepared German ROM without branding from this thread:
http://forum.xda-developers.com/showthread.php?t=446070
But still - same result as above.
Anyone got any idea?
Really nobody having any helpful comment?
did you try to change the radio??
I flashed a whole new ROM - same problem persists.
Besides: It´s not a Radio problem because system sounds and MP3 playback don't have any sound either.
Stating the obvious
Sorry to state the obvious but it sounds like the connection or the speaker module has gone. Have you recently tried the head phones on the X1? please see below link for a possible reason.
http://forum.xda-developers.com/showthread.php?t=282553
excersise your right to return
Regards,
Creamy-Goodness
Hello Creamy-Goodness,
thanks for you input.
If there was somewhere a hardware switch for sound output to speaker or headphones (which I doubt) that is stuck, it would not explain why I have neither sound in speaker NOR headphones. (One would assume that depending on the position of the switch at least one of the two should work.)
Apart from that I only tried the headphones to troubleshoot the problem after I found out there was no sound.
Nevertheless interesting, that this happens to other devices.
Speaker module cannot have gone either. There is an audible system sound from speaker right after hard reset to inform me that I need to calibrate the screen - but no sound anymore afterwards.
I will try to have the device swapped next week.
reg. sound issue
I'm suffering from the same problem here.
it only freggin vibrates.
TheMobilist said:
I flashed a whole new ROM - same problem persists.
Click to expand...
Click to collapse
Usually there is a simple fix which involves replacing a DLL, but not in this case of course - unless that ROM includes the bad DLL. I seem to remember it was a problem which occured after installing TF3D, but I couldn't find anything when searching just now.
It might be worth you checking the ear-speaker sound (make a phone call), as there is always the possibility that sound is being re-directed or intercepted (by something like Troca2). Check what programs and services are running.
Tests should be done with a known-to-work-fine-ROM of course.
Okay, I finally got the original ROM to flash the X1 back.
And strangely - when after one week of not using it I turned it on again to flash the phone, I got my sound back.
I have absolutely no idea what happened and why, but I am glad that I do not have to send it back.
@k_ash82
What I did is:
Turned my X1 off (not just stand-by), really off.
Waited one week.
Switched it on again.
I had my sound back.
No idea why, but maybe that works for you as well?
Just try it and please post your experience.
It would be very kind of you to share the german t-mobile stock rom with the community . Perhaps it could be added to "Xperia ROM and Guides" Thread, too.
I have no sound sometimes with this rom
http://forum.xda-developers.com/showthread.php?t=460190.
After switch off and turn on the phone again the sound is back.
Karsten
i have original sony rom (no branding) and also the same problems
no sound after a while (sometimes when phone goes in standby, sometimes just without a reason)
cannot play any sound in no application (media player,core player,etc) also the phone ringing or sms sound is off.
but the most annoying thing is, i can make a call, the call goes through, but I can hear nothing from the called person.
sometimes it works when i switch of the phone and restart, but sometimes I have to do 4 or 5 restarts.
the phone is now 1 week old, an I haven't installed Touch3D or anything like that, because I made hardreset and left the original configuration on factory settings, just to make sure, that it's no software error.
anyone got a solve for this problem actually?
if I ask google, there are many people with this problem, but no solve found till now
i have an issue with the speaker too but not exactly the same as the one described above.
my speaker still plays sound but it is about 10% of the original volume when it is already set to loudest (you have to put your ear right next to the speaker to hear the sound)
after i re-flashed the rom, it worked normally for about half a day until the problem returned
can anyone please help??
i keep missing my calls ><
thanks
this is a well known issue on some X1 phones ! you cant fix this with any software-update because it is hardware related. some x1 phones have it like every 2 weeks, others 3-4 times a day. most of the time you can just reset your phone but this is not a solution.
you have to send it back to SE in exchange for a new one.
i called my provider (o2) and they delivered a new x1 _on the next day_ in exchange (they have a 48 hrs delivery/pickup/return service).
the new phone works just fine !
- QuadWord

Device wont go to sleep during music playback

Hi,
I´ve been having this problem for about 2 days. While mp3 playback, device wont go to sleep when I press power button. I have to pause/stop playback to do so. I dont know why. I havent installed anything before this. I´m using standard player provided by HTC.
This may not sound like a serious problem, but it kills battery real fast while its on. Is anyone having the same problem? Thanks for any answer.
is this without the headphones?
try this its a great lil programe allows soft reset also has a secondary feature called display switch, witch basically turns the screen off but not the phone. i always have this installed on every device ive ever owned.
Ditto - same issue. Its a bug.
The problem occurs when the device is in headset mode - see http://forum.xda-developers.com/showthread.php?t=482027
No solution available AFAIK. Report it to HTC and the more of us that do it might get a hot fix! Cheers

My working setup..

Please tell me if this is the wrong place for this, but i figured I'd post my working, successful android setup on my HD2.
I am using Chucky's android ROM, 7/23 zimg, but i replaced his radio with 2.12.50.02 and whilst in windows i disabled the sleep timer after 1 min thing. I have had it on for 48 hours now, -amazing- battery life, even with a live wallpaper (mario ftw) never got a SoD, it did give me a gsod the first time i booted, but popped batt out, and rebooted just fine. Like i said been going a solid 48 hours now, great battery, no lag, no sod, phone calls are kind of quiet, which sucks for me, i work in a loud place. So take this how you will, but i'm extremely satisfied with this setup.
I have been having an issue with several builds, radios and wm roms, and now decided to try something.
The Lock/End key was not waking up the device on first touch, sometimes i had to press home, some other times pressing the End key several times, or slide down an imaginary lockscreen in order for the screen to come back and respond as it should.
So.....
I thought I should install AEB plus, or AE button, whatever... to unbind all hardkeys, rather than remap soemthing and reboot... the end key seems to be working now as it should, waking up the device immediately, rather than turning on the black screen. Yay!
Try it and let me know how you get on. Just tried it again, and feels great not having the annoying waking up issue. Hope it keeps this way.
Also, I can confirm that the annoying issue where people you call hear a lot of background noise (mic gain issue), is definately fixed for now using the wired headset that comes with the phone.
Tried connecting some other headphones without microphone and that didnt work. Havent tried using my bluetooth headset to make a call, but in theory it should work too. At least it works for music
Hope this helps some people out there.
Loving the Desire V5
Kudos for everyone involved.

Vibration Not Working

My HD2's VIBRATE function has been on and off ever since I installed ENERGY ROM. It will initially work, but make a weird sounding, not normal, sound for a while, and then just stop working completely.
Does anybody know a possible solution to this?
Thanks!

[Q] Receiving Calls when headphones in (7392 update)) [Solved]

Good morning,
This is my first post. I have recently downloaded and flashed Yukis (7392) ROM updated on 5/16 and for some reason when someone calls in, and I have the earphones in, the person calling gets a fast busy signal. The Caller ID will splash on the screen and instantly go away as if slide screen was activated and the ignore button was pressed. I want to say this is a ROM issue for the last ROM I used (HD20) would attenuate the sound and the call would come thru. I havent tried any other 7392 ROMS to be sure, Just wanted to know if anyone else had this issue with Yukis ROM. And, if we do find it to be a ROM issue can someone inform yuki as I can not because my post count is too low.
Thanks,
Dirty
UPDATE:
Looks to be a Update issue. I just tried it with HD20 rom with the same results. Am I the only user seeing this? I searched the FAQ and I did not see anything stating that this is a Bug. ???
Resolution
So i played around with this for a While and it seems that if you turn off both options in the "Ease of Access' menu then you will be able to receive calls with the headphones plugged in. This also works with mic'd headphones as well.
Thanks,
Dirty
I hadn't even thought of this! I usually turn those options off & hadn't when I switched roms. I'm going to try this when I get home and let you know if it worked for me as well.

Categories

Resources