Related
PROBLEM:
Now, the problem all started when try to format the micro SDHC on the phone or on the PC with card reader.
Tried with differ format program also low level not worked.
DONT USE THESE!!! Waste of time!!!
SOLUTION:
So after doing some thinking about the situation, I figured that there was a problem with the card inserted and find the file EncFiltLog on it.
It is the WM 6.1 encription file. You can't delete, move files from or in to the SDHC.
The best way to solve this issue, as the hard-reset DOES NOTHING to fix this issue, would be to have windows hopefully find the connected device and format it. Here are the EASY steps which DO NOT involve using a dozen computers and has provided the same result EVERY time; which is a working on my 8gig memory in my HTC HD.
1. Connect the HD to the computer and select DISK DRIVE as the option on the on-screen popup on your phone. Don’t select ACTIVE SYNC. If you miss it, then go into your phone and press START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok.
2. On your computer, (USING A WINDOWS XP MACHINE), go into your "My computer"
3. A window for will open with two columns.(If not, change the view to "Group") We are looking at the RIGHT side right now. In there is has three categories, and we are only focusing on ONE of them. LOOK for STORAGE which should be the center category.
4. Click with right to the desired "Storage device; A: ; D: E;", it will take a minute or two depending on your computer speed and environment to populate your hard drive and connected memory devices.
5. You will eventually see your PHONE internal storage listed. IT WILL TAKE SOME TIME BECAUSE YOUR PHONE INTERNAL STORAGE IS CORRUPTED!
***BE SURE WHAT YOU ARE LOOKING AT IS IN FACT YOUR PHONE AND NOTHING SOMETHING ELSE LIKE YOUR MAIN HARD DRIVE OR SOME OTHER STORAGE DEVICE WITH IMPORTANT FILES ON THERE***
****I TAKE NO RESPONSIBILITY IF YOU FORMAT THE WRONG DEVICE***
6. Choose format and let it format the drive. This should also take a few minutes. Select FAT32 and name is whatever you want! Let this finish COMPLETLY!
**Your almost done**
7. Now you can copy, anything you want on it, but if you put again in to the PDA then the
EncFiltLog will come on again. But at least you not have to throw away the card,
you can use it again.
8. Finally my last comment:
If you want to speed up the card (.cab installation, copy, move ...etc.....)
the best way after all this work listed above, you should made a BACKUP from all your PERSONALITIES and
make a HARD RESET.
After it should speed up all the programs and processions with the card.
If you done then one IMPORTANT THING!:
YOU SHOULD NEVER EVER TAP ON THE CARD ENCRIPTION IN THE SETTINGS,
NOT EVEN THINK ABOUT IT!!!!!!
Hope this helps you all out!!
BTW: I want to say thanks to XDA-FORUM (all people) to make my life easier
and to found the right gadgets to use, to play and enjoy it....
Wow - not bad at all for a first post!
Welcome to the forum!
Thanks for providing a solution!
krnkris said:
PROBLEM:
Now, the problem all started when try to format the micro SDHC on the phone or on the PC with card reader.
Tried with differ format program also low level not worked.
DONT USE THESE!!! Waste of time!!!
SOLUTION:
So after doing some thinking about the situation, I figured that there was a problem with the card inserted and find the file EncFiltLog on it.
It is the WM 6.1 encription file. You can't delete, move files from or in to the SDHC.
The best way to solve this issue, as the hard-reset DOES NOTHING to fix this issue, would be to have windows hopefully find the connected device and format it. Here are the EASY steps which DO NOT involve using a dozen computers and has provided the same result EVERY time; which is a working on my 8gig memory in my HTC HD.
1. Connect the HD to the computer and select DISK DRIVE as the option on the on-screen popup on your phone. Don’t select ACTIVE SYNC. If you miss it, then go into your phone and press START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok.
2. On your computer, (USING A WINDOWS XP MACHINE), go into your "My computer"
3. A window for will open with two columns.(If not, change the view to "Group") We are looking at the RIGHT side right now. In there is has three categories, and we are only focusing on ONE of them. LOOK for STORAGE which should be the center category.
4. Click with right to the desired "Storage device; A: ; D: E;", it will take a minute or two depending on your computer speed and environment to populate your hard drive and connected memory devices.
5. You will eventually see your PHONE internal storage listed. IT WILL TAKE SOME TIME BECAUSE YOUR PHONE INTERNAL STORAGE IS CORRUPTED!
***BE SURE WHAT YOU ARE LOOKING AT IS IN FACT YOUR PHONE AND NOTHING SOMETHING ELSE LIKE YOUR MAIN HARD DRIVE OR SOME OTHER STORAGE DEVICE WITH IMPORTANT FILES ON THERE***
****I TAKE NO RESPONSIBILITY IF YOU FORMAT THE WRONG DEVICE***
6. Choose format and let it format the drive. This should also take a few minutes. Select FAT32 and name is whatever you want! Let this finish COMPLETLY!
**Your almost done**
7. Now you can copy, anything you want on it, but if you put again in to the PDA then the
EncFiltLog will come on again. But at least you not have to throw away the card,
you can use it again.
8. Finally my last comment:
If you want to speed up the card (.cab installation, copy, move ...etc.....)
the best way after all this work listed above, you should made a BACKUP from all your PERSONALITIES and
make a HARD RESET.
After it should speed up all the programs and processions with the card.
If you done then one IMPORTANT THING!:
YOU SHOULD NEVER EVER TAP ON THE CARD ENCRIPTION IN THE SETTINGS,
NOT EVEN THINK ABOUT IT!!!!!!
Hope this helps you all out!!
BTW: I want to say thanks to XDA-FORUM (all people) to make my life easier
and to found the right gadgets to use, to play and enjoy it....
Click to expand...
Click to collapse
Yesterday it happens for the second time that my SD-Card gets corrupt again, the first time it happens with a 8 Gb SDHC Sandisk and now with a 16 Gb.! After a hard-reset.Didn't know before I read this post that this could happen ever!??
And indeed I couldn't write or read on the card or format it again, even with a cardreader!
Both cards are useless about €120,- thrown away, gone
Didn't know before I read this post, that this is an WM 6.1 encription issue. Never used or even tap it.
Now I format another 8Gb like the way you describe here, i hope that when i need to do another hard-reset i can use the card again!
BTW, its a little bit strange to me that there are so little reaction from other users here about EncFiltLog problem?
I hope that there will come a solution in WM 6.1 to prevent that b!llsh!t.
Thanks for the great support, i hope it realy works!
Nice post
I have one more question:
What may happen when I delete this encryption file? Is it possible?
P.S. Sorry for my english :/
Hi Everyone!
The best way, if you purchase a new card, to FORMAT at first.
Then you put in to your phone and try not to teke it out any more.
If you want to use it as USB reader the as I write in my first post
START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok .
In this case you can use the phone as a card reader.
It is speed up the file transfer vs. ACTIVESYNC.
If the card is not recognised ether way then,
because of the too much taking out - - put it back; went to faulty.
You can go back to the store for guarantee replacement.
The EncFiltLog is a problem only if you encrypted the card.
The solution to delete it and use as new card described in my first post.
If you put a new card in to the Phone then this file seem to be created by the OP system.
You can delete with format, but it will come back again and again.
krnkris said:
You can delete with format, but it will come back again and again.
Click to expand...
Click to collapse
Your right, the file is still there again!
But I have also a question about a next( hope not) hardreset on my device!
Is it better to format the SD-card (with USB on the device) before or after the hard-reset to save the further use of the card?
Because in my experience you have to start installing everything over again, because the data on the card was anyway corrupt and useless.
It is NOT recommended to use the MS Windows Format command to re-format any SDHC card - it will format them, of course, but with the wrong cluster size, slowing access speed down and possibly causing other problems.
I would suggest to always use a tool like Panasonic's SD Formatter when formating any kind of SD card. You can get it here: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
-Valynor
Valynor said:
It is NOT recommended to use the MS Windows Format command to re-format any SDHC card - it will format them, of course, but with the wrong cluster size, slowing access speed down and possibly causing other problems.
I would suggest to always use a tool like Panasonic's SD Formatter when formating any kind of SD card. You can get it here: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
-Valynor
Click to expand...
Click to collapse
Also good to know, but does it also prevent or solve that EncFiltLog problem?
Is there no registry tweak to turn off or delete that W 6.1 encryption option anyway?
luckyuser said:
Also good to know, but does it also prevent or solve that EncFiltLog problem?
Is there no registry tweak to turn off or delete that W 6.1 encryption option anyway?
Click to expand...
Click to collapse
No as far as I know.
Will creating a read-only, hidden folder called "EncFltLog.menc" on the card prevent this problem?
Phil_123 said:
Will creating a read-only, hidden folder called "EncFltLog.menc" on the card prevent this problem?
Click to expand...
Click to collapse
What do you mean?How do you do?
HI folks, glad to find some peeps who are suffering from the same problem...
The solution here seems not to work for me, as I hard-reset my TouchHD before I found out about that encryption ****up...
Is there any solution that allows you to reformat the card?
Not to mention that I NEVER touched that damn encryption option as I really never trust M$ that far with my data... seems it got me Pwned anyways...
Anyone ever tried to Write M$, tell them what a bunch of wacky Ho's they are and demand a new miniSD Card from them?
sorry for my language but atm I mad as hell as I just lost a 8GB and a 16GB sanDisk...
I experienced a lot of bc during all the yaers messing with M$ stuff but this ****up ins unbelievable...
I had the same problem with my 8gb sandisk.
I would like to add that I was able to retrieve most of my files from the memory card using EASEUS Data Recovery Wizard Professional. You need to do the data recovery before attempting to reformat the card.
Hi guys sorry for messing around in your forum but this post is the closest solution to my problem. I cannot format or save anything to my 16gb sandisk card because of that bloody encryption file. Now the problem is that I'm a Kaiser user and I do not have disk mode in my phone, so has anyone successfully formatted their card without using disk mode?
one very quik question. Does this fix the problem for good? you can use the sdhc card with the phone or will it always end up with menc file?
card unreadable in one night
Yesterday, my sdhc 8gb card was working properly but in just one night something happened to it. In the morning, I came to know that it is not more being recognized by htc hd2. Every time I soft reset or hard reset the phone a message come up saying "Do you want to format this storage card to make it readable? this will permanently delete any files on the card." when I click no nothing happens and phone keeps on working and if I click yes then the card is formatted in just 1 second. I tried formatting the card myself from phone format tool (there is format card tool in tools section of the phone) but it is showing only 30.61 mb instead of 8gb.
After reading this thread, I think the problem is with EncFiltLog. Actually I backup my phone and card yesterday with sprite backup. I also backup EncFiltLog on my pc. Now after hard resetting the phone I delete the newly created EncFiltLog file by the fresh WM 6.5 installation after hard reset. I deleted that file from my pc by using the phone card storage as disk drive instead of activesync and simply shift+delete the file from removable storage in My computer. After that I copied all the phone card backup (including EncFiltLog - old one) on the freshly hard reset phone. Now all of sudden in just one night phone sdhc card is not able to recognized by phone.
Moral of the story: Never backup EncFiltLog. Keep the newly created EncFiltLog file by wm 6.5 after hard reset and copy your all files and folder from card backup to phone card (excluding EncFiltLog) after a hard reset. Don't ever overwrite the newly created EncFiltLog.menc file with old one from backup.
Reason: I think WM 6.5 pairs the newly created EncFiltLog with its some key on phone internal storage. Remember how encryption works? I am talking about public key and private key pairing. I think WM6.5 pairs one key stored in EncFiltLog with another key stored inside the phone interal storage which is itself freshly created after the hard reset but when we copy the old EncFiltLog from storage card backup to freshly hard reset phone storage card, those key pairs won't match anymore and windows mobile 6.5 simply locks up the card.
it is my own opinion.
One more clue
Ok guys, I've got one more clue after googling and reading other threads on this forum. May be HTC is supplying fake 8gb sdhc card with hd2.
I've came on that conclusion because yesterday there was more than 5 gb space left on my phone storage card. In the night RSS Hub software has updated all the feeds and stored those feeds on storage card (I've set feeds to be stored on storage card). I think something has been gone wrong there. May be the actual capacity of this fake storage cards in far less than what is written/claimed on the card (i.e. 8gb). In the night as soon as the RSS Hub stored feed on the card, it somehow corrupted the card FAT writting its data on sectors of the card where it should not be.
Hence the card is corrupted now just showing 30.61 mb instead of 8gb. There exists no solution for this situtation till now. I've sent mail to HTC regarding this on their customer support page. Let's see what would happen now. I suspect either HTC or my dealer would say that the storage card don't come under warranty. Let's see now. I will update the thread soon.
My problem is the same.....
after HSPL I faced "Do you want to format this storage card to make it readable?..." and after that I lost my mSD.
Format Storage Card didn't worked. it shows 30.61MB , Cluster Size: 0KB
also Clear Storage didn't worked...
System > Memory > Storage Card > Total storage card memory: Not installed
Is there any other way to fix this problem? because of my country, it is difficult to use HTC Service...
Heya! I asked this is in the respective ROM-thread aswell, but noone seems to answer =p
I just installed a new ROM on my device (link can be found at bottom if needed). However, since the install, my file explorer no longer finds my memory card. It has on all previous roms, so I'm not sure what's wrong. Any ideas?
showthread.php?t=564028
(stupid thing didn't allow me to post the entire link..)
I would take out the sdcard softreset when it started again I would reinsert the sdcard
and see
My X2 has this huge problem too. Its very iritating, because SD card disappeare in hour from inserting to X2. Sometimes it solves when I remove and insert card again but usually I must soft reset. Is there exist any solution to fix this?
alesmatusek said:
My X2 has this huge problem too. Its very iritating, because SD card disappeare in hour from inserting to X2. Sometimes it solves when I remove and insert card again but usually I must soft reset. Is there exist any solution to fix this?
Click to expand...
Click to collapse
i had the same problem, i dont know if it has something to do with it but i think that disabling the "energy save" (or something like that) helped, now i see the card always, however:
I have an autorun app (Garmin), usually when you insert the memory card it asks to be executed...
Now i get that execution request like 3 or 4 times by day, meaning the card gets disconnected somehow..
I´ll try this, but where can I find energy save?
Em I only one who have this problem? There must be a fix. However the X2 is unusable...
happens to me to
X2 mem card that came with the phone (original rom)
one time its there next its not (may come back but most times i need to reinsert it or reboot my x2)
Hi guys,Had the same sd card problem with my x2 before,from a week it is visible all the time,first I start with removing the card and putting it back again,no results,than I formatted it with a card reader(be careful here should be formatted fat32) than it was stable for a while,than it started again,I don't know how I managed to fix it but I installed some program called SKKV.Software.SKTools.v4.1.25.4 and formatted the card from the menu there than put all my contents back again from my pc through active sync and now more than a week it is there working every time I try to enter it,hope that I've help wish u luck
But it's not. LOL. Any ideas?
try taking out the battery, popping up the sd card "tab" and reseat the SD card to ensure it's touching all contacts, then firmly press the tab back down, replace the battery and give it a shot!
good luck!
SilverStone641 said:
try taking out the battery, popping up the sd card "tab" and reseat the SD card to ensure it's touching all contacts, then firmly press the tab back down, replace the battery and give it a shot!
good luck!
Click to expand...
Click to collapse
Did they twice. I even stuck it in in my sd card reader any my laptop to read it. Is there an ADB command I need to use? I rooted it using Toast's method.
did you flash a new rom after toasts method? i went to OMJ's eclair v1.2 and had no memory card issues
When I went to change to a faster sd, it didn't recognoze it. I could put the sd in a usb sd-reader and it was valid. The EVO said "damaged sd" at boot. There is probably a check-sum or a stored directory block address some where in NAND. I think I needed to dismount the sd card, then remount it after boot. Be right back.
So I dismounted the SD placed the new one in and it was still "damaged". Asked if I wanted to reformat the card. Upon reformating it's good. So a "damaged sd card" is simply unreadable.
loading data now. All except "LOST.DIR" which was on the reformatted sd, so it could be bad block file.
Ok it works, lesson, always dismount the sd, don't alter "LOST.DIR" duh!!!
mine did the same thing randomly one day. i've always used the stock card that came with the phone and one day it just started telling me my card was bad. i started worrying it was that "htc bug" that hit some people, but i just turned off the phone, powered it back on and all was good to go
There is a fix for the sdcard not being detected problem floating around here:
Calkulin said:
Fix SD
Press & hold vol down and power on the phone
Select fastboot by pressing the power button
Make sure in device manager the driver is installed(Win 7 x64 downloaded them automatically)
Open command prompt like you would to use ADB and type
fastboot oem enableqxdm 0
fastboot reboot
That should fix your SD card not being detected.
Click to expand...
Click to collapse
danknee said:
There is a fix for the sdcard not being detected problem floating around here:
Click to expand...
Click to collapse
I did that and it recognized the sd as Im not getting an error, but now I cannot mount the sd via USB. Now what ? lol
Breakthecycle2 said:
I did that and it recognized the sd as Im not getting an error, but now I cannot mount the sd via USB. Now what ? lol
Click to expand...
Click to collapse
The USB fix is listed right after the sd card fix here.
So after I flashed WP7, everything works fine. But whenever I turn off the phone (long press end call key) and open it again the next day. All my settings are gone (i.e. Hard reset without me doing anything). Also same thing happens when I change my regional settings and click that link to reboot my phone. Why is this? Hope someone can helpme out.
EDIT:
EVERYTHING IS WORKING. Data is saved after reboots.
Steps:
1. Flash WP7 like usual WITH SD card inserted
2. Wait for WP7 to load up.
3. Physically REMOVE SD card from phone.
4. Restart phone
5. When phone is booting up (white HTC screen). Put back in the SD card
6. You should then see the WP7 setup screen.
I hope this helps out other people who had similar problems with stock hd2 2GB SD card.
r
Arref said:
So after I flashed WP7, everything works fine. But whenever I turn off the phone (long press end call key) and open it again the next day. All my settings are gone (i.e. Hard reset without me doing anything). Why is this? Hope someone can helpme out.
Click to expand...
Click to collapse
sorry for the stupid q, but do you have an sd-card inserted into your phone? cause it seems like you don't. wp7 uses sd card for some off system files.
HarnicGreeras said:
sorry for the stupid q, but do you have an sd-card inserted into your phone? cause it seems like you don't. wp7 uses sd card for some off system files.
Click to expand...
Click to collapse
yup, SD card is in. Pretty sure it's compatible (According to this post: http://forum.xda-developers.com/showthread.php?t=912904 it's). I've got the stock HD2 SanDisk microSD_2 GB.
i have exactly same problems did you ever figure it out?
thanks
Arref said:
yup, SD card is in. Pretty sure it's compatible (According to this post: http://forum.xda-developers.com/showthread.php?t=912904 it's). I've got the stock HD2 SanDisk microSD_2 GB.
Click to expand...
Click to collapse
i bet its not compatible, this sounds like the shipped 2gb card and i had the same problems like many others with the shipped sd card
-> have you got the first start steps?
i think no
remove your sd card, go to settings, info and reset your phone
after this everything will work (until your storage is gone)
HM
God i hate this :[
0711 said:
i bet its not compatible, this sounds like the shipped 2gb card and i had the same problems like many others with the shipped sd card
-> have you got the first start steps?
i think no
remove your sd card, go to settings, info and reset your phone
after this everything will work (until your storage is gone)
Click to expand...
Click to collapse
Yeah i've heard about the stock sd card being a pain, going to try your suggestion.
Everything is working. I've listed what I've done in my original first post.
Hi,
I did some wrong wipe using CWM, then I think my phone is clean now.
Now, if I press Power+ VolumeUp + VolumeDown buttons, I'll get to the pink screen.
Trying to connect to the PC thru USB cable, I'll get a Removable disk named "Qualcomm CDMA Technologies MSM", with size of 239MB.
I tried to copy all 5 files downloaded from this thread http://forum.xda-developers.com/showthread.php?t=1370960 to /image/, or /cust/image/, or /cust_backup/image/ and the UPDATE.APP (from step 2, official 2.3.5 package) in /dload/ folder of a blank SDcard, but it still goes to the pink screen.
Any hint for me? I cannot download the official 2.2.1 package
Thanks a lot!
-- Edited --
I re-partitioned my phone before following this guide: http://android.modaco.com/topic/341374-custom-you-data-partitions-size/
My phone is the GSM version, not the CDMA (C8800) one.
I think my /system/ dir is also empty. Does it have anything to do with the upgrade?
Following this post I'm able to have CWM4 and Oxygen back.
http://forum.xda-developers.com/showpost.php?p=18944228&postcount=4
Thanks.
But, still not able to install stock 2.3.5. Any hint on this? Thanks!
Averell said:
Hi,
I did some wrong wipe using CWM, then I think my phone is clean now.
Now, if I press Power+ VolumeUp + VolumeDown buttons, I'll get to the pink screen.
Trying to connect to the PC thru USB cable, I'll get a Removable disk named "Qualcomm CDMA Technologies MSM", with size of 239MB.
I tried to copy all 5 files downloaded from this thread http://forum.xda-developers.com/showthread.php?t=1370960 to /image/, or /cust/image/, or /cust_backup/image/ and the UPDATE.APP (from step 2, official 2.3.5 package) in /dload/ folder of a blank SDcard, but it still goes to the pink screen.
Any hint for me? I cannot download the official 2.2.1 package
Thanks a lot!
-- Edited --
I re-partitioned my phone before following this guide: http://android.modaco.com/topic/341374-custom-you-data-partitions-size/
My phone is the GSM version, not the CDMA (C8800) one.
Click to expand...
Click to collapse
So did you managed to get back "old" ROM back?
mesnati said:
So did you managed to get back "old" ROM back?
Click to expand...
Click to collapse
Hi, I have been able to get back CWM4 and Oxygen now.
I'm also trying again with stock 2.3.5 but still failed. Always lead to the pink screen when pressing Power+VolumeUp+VolumeDown.
Any hint for me?
Averell said:
Hi, I have been able to get back CWM4 and Oxygen now.
I'm also trying again with stock 2.3.5 but still failed. Always lead to the pink screen when pressing Power+VolumeUp+VolumeDown.
Any hint for me?
Click to expand...
Click to collapse
Did you copy the dload folder and its content to an internal or external sdcard? Sounds a bit like your phone doesn't find the update files.
sbasil said:
Did you copy the dload folder and its content to an internal or external sdcard? Sounds a bit like your phone doesn't find the update files.
Click to expand...
Click to collapse
internal sdcard? what's that?
I have external SDcard and putting it in SDCARD slot.
So i made dload dir on external SD card and try to install
sbasil said:
Did you copy the dload folder and its content to an internal or external sdcard? Sounds a bit like your phone doesn't find the update files.
Click to expand...
Click to collapse
I tried with the external sdcard. My card is 4GB, FAT32. Should that be the cause of this issue?
I also tried with the internal sdcard (/HWuserdata/dload/UPDATE.APP) but the result was same.
Is there anycase that my UPDATE.APP is corrupted? Could you please help check it's checksum?
Thanks!
============= UPDATE ===============
I tried with the internal sdcard ONLY (remove the external card), and it's working. Firmware update Step 2/2 - ~35% now.
THANK YOU A LOT!
Friend Averell I had the same problem. I solved it this way:
When the phone was off (black screen) after the "Step 2" update,
I pushed the Vol-Down key (not the Vol-up) and then the power button.
After this I left the power button, but I kept pressing the Vol-down for at least 10-20'', until a screen was shown which told me "Formating User Data, Formating Cache" etc.
After all these the phone booted ok and the stock ROM was activated.
I didn't even needed to apply the "Step 3" of the upgrade.
Try it and I am sure your problem will be solved.
mesnati said:
internal sdcard? what's that?
I have external SDcard and putting it in SDCARD slot.
So i made dload dir on external SD card and try to install
Click to expand...
Click to collapse
I meant the internal 2Gb memory of the phone. Sounds still weird tho. Unless your sdcard has some exotic file system that the phone can't deal with (mine has fat32 and everything went well), I don't know what it could be. Maybe some wiser person could step up here. And check that you didn't use capital letters for your dload folder...Don't know if that really matters, but it could...
Thank all.
The problem seems to be at my 4GB SD card. I flashed 2.3.5 successfully with the internal card.
I tried another 2GB card, and it also work.
Thanks!
yesterday, i managed to update oxygen 2.3.2 r1 to huawei's official 2.3.5 with my 8GB Kingston card, and everything went well, but today when i tried to shoot video, camera stopped after 6 seconds, and phone said that sd card is removed, and i tried to restart phone, took sd card off from phone and formatted card in PC, but nothing worked, then i put another 2GB card in phone and everything is working again??!? weird.. maybe my kingston's warranty just voided last night. It's so typical to me.
Micco85 said:
yesterday, i managed to update oxygen 2.3.2 r1 to huawei's official 2.3.5 with my 8GB Kingston card, and everything went well, but today when i tried to shoot video, camera stopped after 6 seconds, and phone said that sd card is removed, and i tried to restart phone, took sd card off from phone and formatted card in PC, but nothing worked, then i put another 2GB card in phone and everything is working again??!? weird.. maybe my kingston's warranty just voided last night. It's so typical to me.
Click to expand...
Click to collapse
You could just try re-formatting the 8Gb card and see if it works. I've ended up cleaning up the whole sdcard for a few times (I've usually had a small ext2 partion and wanted to start from the clean table) after which everything has been back to normal again (in windows cmd: diskpart --> list disk --> choose Disk "your sdcard" --> clean all --> create new partion and format the card) ..or you probably could do that in CWM recovery too...I'm just too used to do it this way...just beware if you try this, be SURE you choose the right disk or you'll end up deleting a whole partion from your computer's hard drive.
sbasil said:
You could just try re-formatting the 8Gb card and see if it works. I've ended up cleaning up the whole sdcard for a few times (I've usually had a small ext2 partion and wanted to start from the clean table) after which everything has been back to normal again (in windows cmd: diskpart --> list disk --> choose Disk "your sdcard" --> clean all --> create new partion and format the card) ..or you probably could do that in CWM recovery too...I'm just too used to do it this way...just beware if you try this, be SURE you choose the right disk or you'll end up deleting a whole partion from your computer's hard drive.
Click to expand...
Click to collapse
thanks, i will try that method.
ok, cleaned whole sd card and re-partitioned it and formatted, but no luck. Still when i try to take picture or video it wont let me to do that. It does still make android and DCIM folders etc. to card... and i can copy files to card with computer. but only with external card reader, not in phone.
Micco85 said:
ok, cleaned whole sd card and re-partitioned it and formatted, but no luck. Still when i try to take picture or video it wont let me to do that. It does still make android and DCIM folders etc. to card... and i can copy files to card with computer. but only with external card reader, not in phone.
Click to expand...
Click to collapse
Too bad. But it's hard to believe that your SD card has something wrong in it since it works in your computer. Probably another unexplained weird software glitch again. Some people reported that they can access the sdcard but not being able to write on it, maybe this "bug" is in the same category.
Btw, have you tried any other ROM and if the problem still exist there?
sbasil said:
Too bad. But it's hard to believe that your SD card has something wrong in it since it works in your computer. Probably another unexplained weird software glitch again. Some people reported that they can access the sdcard but not being able to write on it, maybe this "bug" is in the same category.
Btw, have you tried any other ROM and if the problem still exist there?
Click to expand...
Click to collapse
ok, i tried card to nokia phone, and it works in there.. also it has been in huawei since beginning, so it has worked with official 2.2, B160 custom rom and with oxygen latest. But now when i changed to new beta 2.3 rom, it worked about a day. Maybe i have to wait one more month until final rom is released. Thanks sbasil for good advices.