Database Users

Error reading /sdcard/ *Guru assistance needed!*

I used the root method at unlockr.com, and i have #root# access in the terminal emu app. When i get to the part at unlockr about flashing recovery, (thru terminal emulator) i get an error reading /sdcard/recovery-RA-heroc-v1.5.2.iso
I have RUU'd the phone at least 5 times... I have also tried using the cmd using the guide here, and get an error at basically the same spot.
my hero is 1.56.651.2. i have spent over 15 hours across 2 days searching forums and trying different methods, but i guess i must be doing something wrong.
btw.. the very first time i tried using the method from unlockr (root through cmd, flash recovery through terminal emu) it *almost* worked. It tried and got a ton of messages and an error regarding too little memory. after i looked it up and realized i could have just freed up memory in the PHONE(not sdcard) it was too late, i had already RUU'd again. It hasnt come close to flashing since, only the error reading message.

i get an error reading /sdcard/recovery-RA-heroc-v1.5.2.iso
Click to expand...
Click to collapse
this isn't your issue is it?
----------------------
settings>sd card and phone storeage>unmount sd card
settings>sd card and phone storeage>format sd card
do a RUU to go back to bone stock, same version you have
http://forum.xda-developers.com/showthread.php?t=608434
follow this
http://forum.xda-developers.com/showthread.php?t=583291
EDIT: and when it get to this part about "flash_image recovery recovery-RA-heroc-v1.5.2.img" give it an extra min after you hit enter and it "looks" like it's done before proceeding
let me know if you get stuck, i'll keep an eye on this thread also let me know at exactly which step "looks weird"

oops that was just a typo. I have been using .img for the file ext like you are supposed to. I have formatted the sd before trying, and the same error. The guide you pointed me to also did not work, I always get a flash error at (step 18). I have RUU'd at least 5 times to start over, and it didnt help any.
and about giving it an extra minute after the flash command, it instantly tells me
"error reading /sdcard/recovery-RA-heroc-v1.5.2.img"
so i cant really do that.
What should i do

I have ran into that same issue. I would guess you have upgraded the stock sd card. If you have, it is formated to fat32 not fat like the original. Try formating the card fat then try again. Good luck to you.
Dave
EDIT: I see you have formated the card. I believe the card has to be fat not fat 32 (someone correct me if im wrong). When I was rooting my phone I had same error til I formated it fat. May the force be with you.

What do you mean by upgraded the sd card? I didnt ever do that...at least not on purpose. So how would i check the format?

Put the card into a card reader in a pc, right click on drive and hit properties.

crap, i dont have a reader for this type of card. no way to do it through the phone?
and this problem couldnt be from anything else, could it?

cweezyf said:
crap, i dont have a reader for this type of card. no way to do it through the phone?
and this problem couldnt be from anything else, could it?
Click to expand...
Click to collapse
you can mount the card from the notifications bar when you plug your phone in usb. then just right click on the removable disk in my computer (mine's drive H: ) then click "properties"
it will bring up this window
if it says FAT32 then there's the (assumed) problem.

Okay!
it IS fat32.

cweezyf said:
Okay!
it IS fat32.
Click to expand...
Click to collapse
do you know how to format?
before you format be sure to save anything you have on your sd card that you want/need as it will erase everything.
1. move anything you like to save to your computer from your sd card
2. right click on the removable disk in my computer
3. click on "format"
4. in the little window that pops up chose "FAT" leave everything else alone
5. click start.
6. thats it!

damn its not working.
As soon as i click format it unmounts...any idea?
BTW thanks for the help

cweezyf said:
damn its not working.
As soon as i click format it unmounts...any idea?
BTW thanks for the help
Click to expand...
Click to collapse
i've never tried it that way, but you will probably have to go the card reader option, or use...
GParted
windows disk management
but those tools give you the power to seriously mess up your computer. so i recommend running these on someone's computer you don't like.
or the card reader option

You can format the card under "SDCard and Phone storage"
Just unmount then format.

Okay well modchipper said he had the same problem, and the sd has to be formatted to FAT,not Fat32.
Gparted and the other tool, how can they mess up my computer?
The format option in the phone formats to FAT32...

If you're not careful you can accidentally nuke your hard drive, instead of your sdcard.

Well i tried windows disk management and it didnt see the drive. Gives me a feeling that gparted wont work either. does anyone know for fact that sdcard format has to be FAT?

Well once again I'm at my mom's, and her USB ports are screwed up, so I couldn't tel you what mine is formatted as.

Well i have multiple SDCards, but the one that is currently in my phone is formatted in FAT32 & I believe that was the one I used to root & flash the recovery originally...

Well this just seems impossible it seems ive hit a wall...
Im trying to use Fresh pre kitchen, but that wont work either because i have windows 7.

The Fresh Pre-kitchen works fine on Win7.

Clockwork Recovery 3.0 Corrupted My 16gb Sd Card

I had just finished installing Myns New Rom and Flashed the combo radios aswell, I ran Titanium Backup and installed my apps. I opened Rom Manager and said I had to flash Clockwork Mod and it updated to 3.O. I then proceeded to make a back up of the rom and then my phone went straight to boot loader, It would not reboot and would not enter recovery just reboots back into boot loader. I finally removed the sd card and rebooted after 10 mins it went back to my rom. I then tried to open my sd card on pc an nothing shows up, I tried 2 others and nothing, cannot even format. I borrowed my friends evo and went to recovery with sdcard in to format it say error can not mount and nothing. I tried within the phone, with cm6 installed and it said the sd card was blank or wrong something, (I forgot) No luck. I think it might have destroyed my sd card, Im trying to find a software that may allow me to do so any luck.
-not visible in pc
-cannot mount or format on phone or recovery mode.
-16gb Micro Sd card Sandisk class 2, bought when touch pro came out for 110 from bestbuy (got 100 back from Htc Touch return so really only 10)
-Had partitoned earlier to run mikifroyo app2sd, unpartioned by formatting.
Please any help would be greatly appreciated, thank you.

Ok when I Insert My SD card it just boots to loading and reboots over and over again. Any ideas?

deolarte said:
Ok when I Insert My SD card it just boots to loading and reboots over and over again. Any ideas?
Click to expand...
Click to collapse
try looking in the forums for the lastet recovery in .zip format.
Copy it to the root of the sd card. (if you think that you have an issue with the SD card, then take a fresh SD that is formatted to Fat32. Make sure it is not NTFS. If you formatted on the Mac, make sure the partition format is MBR and not GUID, if you don't know how to do this, I can explain further. The easiest way would be to make sure that you do it on a windows machine)
Start your phone, and hopefully it will install the recovery automatically.
After you install the recovery, and get your phone booted into android, you can locate a pre-rooted rom of your choice in the forums here or at the "other" place if you prefer.
You can read more about it in this other section of the forum. The information below is from that forum, in case you can't find it or are too lazy to search.
http://forum.xda-developers.com/showthread.php?t=705026
Latest version :
IMG (fastboot or flash_image method): recovery-RA-supersonic-v2.2.1.img - MD5Sum: c9a28b8be2c97e5805d530ed991b26fe
PC36IMG (bootloader method) : PC36IMG-Amon-V2.2.1.zip - MD5SUM: 26eadae1e206784d0bb9426f24f4303d

Thanks, I was planning to do this but Im more concerened about my sd card, The phone boots well with out the sd card now, So I was planning to install the zip later. Thanks though I really appreciate the help and thoroughness of your answer which is great. But do you by anychance know what I can to do to recover the card back?

deolarte said:
-not visible in pc
Click to expand...
Click to collapse
Not visible as a drive or not visible as one that can be formatted?

drive on one pc and not possible to be formatted on other. Not possible to format on nook, evo, camera

[HOWTO] WORKAROUND for BELL i9000m Internal SD Card Failure!!!!!

Hello Everyone,
I like most people upgraded my Bell i9000m from Kies to Froyo, only to have it bricked with the "can't mount /dev/block/mmcblk0" error at the recovery screen during boot-up. I upgraded it last week, where it took the firmware from JL8 to I believe JK3 or JL8 (not sure at this point).
Unfortunately I bought my phone from some guy on Kijiji using it on Rogers, so I doubt Bell is going to handle the return or give me any love
Anyways, I spent many days long days trying to get it back working, and I found a work-around that requires using an external SD card. and going back to Android 2.1 ECLAIR
Steps (This is what I did):
1. Install JK3 stock ROM via Odin (with re-partition at the pit on samfirmware.com, didn't update boot loader)
2. Install K13c speedmod kernel via Odin
3. Insert 16GB External SD card
3. Boot phone to Froyo
4. Reboot to recovery console and wipe data/everything
5. Install JL8 stock ROM via Odin (no re-partition, didn't update boot loader)
6. Phone will boot-up into recovery mode and automatically do wipe data
7. Phone will boot into ECLAIR
8. You will see internal storage of 1.85GB free.
9. Install Market apps - I installed twitter
10. If you remove external SD card, twitter will crash.
11. If you reboot phone without external SD card, you will get rebooting logo
12. If you put external SD card back it, phone boots!
This wasn't a fluke - I was able to reproduce if I flashed other ROMS (XXJPY or similar) instead of JK3.
Background:
Even though the phone can't boot with stock ROM, if I install JK3 ROM + speedmod K13b speedmod kernel, I can get the phone to boot to Froyo, but there is no internal storage (it shows up as 0 bytes available). So you can't install Market apps, and therefore is useless. I can't even mount the external SD card under the Settings app!
So I tried to log in the Froyo device using adb shell, and what I found is that internal SD card is no longer showing up under linux, and the OS thinks that the external SD card is the internal one. This is probably why the external SD card can no longer be mounted.
I figured out that the external SD card shows up as /dev/block/mmcblk0!!! WHich is the same block device as the internal SD card...so I'm thinking if I reboot into recovery and format SD card, how come it's not working? I even tried to partition the external SD card with android partitions, but still nothing!
I think Froyo is 'smarter' in that it knows the external SD card is not internal (whether it's grepping the device-info for manufacture data, don't know).
But if I go to JL8 Eclair, the Android 2.1 is 'dumb' enough that is doesn't see the difference between internal and external, so formats the external to look like internal.
Once I boot to ECLAIR, the external SD card is greyed out under Settings app, but I get 1.85GB internal storage!! OK I can't access the whole 16GB of the card, but at least my phone is not toast.
I can go ahead an install apps, which will install to the external SD card. But if you remove the external SD card, the phone will no longer boot. If I remove the card and apps are running, apps will crash (case in point: I tried twitter).
It will be nice if others can re-produce my findings. But for now my Samsung Galaxy S has been saved!
Kashif Shaikh

this sounds promising, can some more people confirm this solution to use External SD to imitate internal SD?

It worked for me as well! I have i9000M version, with internal SD failure. I'm also using 8GB external microSD card. I tried several 2.2 Android firmwares - specifically I9000XXJPY, I9000XXJPU. With update to speedmod-kernel I'm able to load device, but it doesn't see neither internal nor external SD card. So I couldn't install any applications, upload data or even shot with camera.
Based on this thread, on top of XXJPY with speedmod kernel I uploaded I9000XWJM8 firmware (Android 2.1) with Odin 1.7, no repartitioning. It worked right away - device loaded and I can see ~2GB of program storage (assume they storage is located on my external card). Both internal and external cards are shown as "Not available" in settings. I can install applications now, which made "brick" a bit better then it was before. Unfortunately, I still can't upload any data, i.e. a book for FB2Reader. And can't make a photo with my camera. And it's now Android 2.1, which looks slower.
First of all - thanks for the advice! It would be good to have this topic "sticked" and distributed - there might be other guys with no chance to repair phone under warranty.
Secondly - if someone can do a "hack" for Android 2.2 firmware so it can use external SD card for program storage specifically for I9000M device? And it would be terrific, if the remaining part of SD card (or at least some fixed size, like 4 GB) can be mounted as storage, so the data like music or photo or books can be uploaded.

I'm able to connect to the phone using adb tool, but I can't find a folder on the device where I can upload (push) a file to. I'd like to upload a book to the device so I can finally use it as a reader. I tried all "root" folders (adb shell -> ls) and all don't work. It says "No such file or directory" or "Permission denied".
Is there a folder on the device which I can push file to using adb tool? Maybe somewhere where applications are installed to, i.e. Program Storage location. Please help!

Anyone else following this thread with I9000M with internal card dead?

This isn't much of a fix. This will only work with phones with slightly corrupted (and not fully corrupt) sdcards; eventually your phone will probably stop booting with this "fix" as well. You're going to eventually loose some of the other partitions such as stl10 to corruption, and then you're screwed.
The OP's phone is corrupt in a specific way that allows this - and there are various procedures that will get your phone to a semi-bootable state if you only have a partially dead sdcard. Like the OP said - just installing speedmod kernel with an external SD in will allow your phone to boot, for example (I got my dead sd i9000m to boot froyo with the speedmod kernel, and others had reported the same as well). Then if you're technical enough you can switch around your mount configs and get it to work without the internal mmc device.
It doesn't matter if you bought your phone off kijiji or craigslist 2nd hand; send it back to samsung (or go thru futuretel or a similar provider). No receipt is going to be required (if they ask... just say you can't find it). Products like this will always be repaired under warranty based on manufacture date code.
Send your phone back; don't try to fix it - it's a hardware problem with the mmc connection.

Unfortunately, I'm 10 thousand miles away from Canada with no chance getting there. If I had option to send it back for repair I would do it right away. So I'm searhing an option to use this semi-brick as much as possible.
My i9000M phone has totally corrupted internal SD card - it failed two months ago and I tried all options for it reformatting / remounting / whatever. With speedmod kernel it loads even without external sd card. It just allows loading without internal storage - not use external card to mimic internal. Unfortunately, it doesn't see any storage then - no internal, no program, no external card. So it just loads.
With Android 2.1 and external card it loads _and_ see 2GB of program storage (on external card). It doesn't see any other storage - so I can't upload any file. But at least I can install applications.

I'll try this solution after buy a Microsd card. My i9000M internal sdcard dead in two days ago after fixlag use ext2 partitions.

hi all. i didn't find JL8 stock ROM for sumfireware.com.where can find it ?
i flash my phone step by step as top post.
but after flash 2.1 rom with insert SD card , my Phone still cannot boot into ECLAIR .
who can help me? thanks. my phone can boot to 2.2 system without internal card.

SHINE.YANG said:
hi all. i didn't find JL8 stock ROM for sumfireware.com.where can find it ?
i flash my phone step by step as top post.
but after flash 2.1 rom with insert SD card , my Phone still cannot boot into ECLAIR .
who can help me? thanks. my phone can boot to 2.2 system without internal card.
Click to expand...
Click to collapse
Samsung or bell can help you. Send your phone in for repair....

for same reason .i cannot send my phone to bell. so i very want to know find JL8 rom to let me phone canbe use . please help.

HI guys . thanks for your help.
actually ,every I9000 2.1 rom CAN use this solution. just need your external SD same as your phone internal SD size. if you are 8G internal SD , you must use 8G external SD card with 2.1 ROM . you can get 1.85G system space.

I've just tried XWJVB firmware - stock Android 2.3.3 - and it also works! Phone loads without flashing custom kernel.
I wonder, if there is a way to upload any file to the phone - so I can put there a book and read it.

does this mean this workaround still can't recover the files that were originally in my internal sd?

Nope. the internal sd is gone, probably forever.
workaround allows running the phone and having 2GB out of microsd card available for programs storage. it allows downloading and installing application from app market. still, you don't have other storage - can't upload a file or even make a photo with camera.
very wierd. if anyone would suggest a workaround to upload file to the device - even using any hacked way, like from abd or whatever

I flashed custom Kernel (CF-Root-XW_XEE_JVB-v3.1-CWM3RFS) over latest JVB. The device is now rooted.
Using adb tool I was able to push fb2 file to device - specifically to dev folder. (adb push file.fb2 /dev). Using Moon Reader I can open and read it! That's terrific after long time of finding a way of doing this.
Unfortunately, Moon reader is the only app that works. FBReader tries to open the book but fails with writing cache to sd card (which is broken).

This is a most useful post, thank you. I get the phone working on 2.2 which is great but I am unable to find the JL8 stock ROM, I locked for it everywhere but could not find it, would someone please indicate where to find it...

raullugo said:
This is a most useful post, thank you. I get the phone working on 2.2 which is great but I am unable to find the JL8 stock ROM, I locked for it everywhere but could not find it, would someone please indicate where to find it...
Click to expand...
Click to collapse
Why would you need old stock ROM?
Just flashed XXJVP stock ROM to my I9000M. This is Android 2.3.4. Taken from http://forum.xda-developers.com/showthread.php?t=1011901
Flashed CF-Root-XX_OXA_JVP-v3.7-CWM3RFS on top of it for rooting
Phone works
It needed some tricks this time to upload a file to deivce. For some reason all folders appear to be read only, including dev. So I used abd shell command to change folder permissons
adb shell
$ su
# chmod 777 /data
then exit and
adb push file.fb2 /data
File is stored and is not lost on reboot, like it was for dev folder

stuck on step 6..
first of all, this is a great post for those who still stuck with a dead i9000m and no help from Sammy!
Steps (this is how i followed)
1. fine
2. fine
3. fine (i inserted a 16gb Sandisk class 2 in FAT32 format)
3a. i couldn't 'boot to froyo' i'm not sure if you mean fully boot into the OS or not, but it was in a bootloop
4. i was able to get to step 4 somehow to the recovery (3e) and wipe data (there was still the cant mount error when wiping data but no error when wiping cache partition - is that normal?)
5. i cant find JL8 but others here suggested any other 2.1 ROM works so i tried JM8 (no repart/no update bootloader)
6. the phone did do something other than boot loop! (first time wow!) it was trying to copy something but it didn't go all the way through.. there was an error saying 'efs format failed /dev/block/mmcblk0p2' after/during 'coping media files'.
- could it be the wrong format going in (should it be something other than FAT32?)
- could it be that class 2 was not the right class (no fast enough??)
- the copying process stopped after it finished copying media files.. (the micro sd card did have some media files
- there was 2 folders Samsung folder (with media files) and svox (i think that was the name of the folder)
can anyone shed some light on where i did wrong, thanks everyone, love this forum btw.

pavbul said:
Why would you need old stock ROM?
Just flashed XXJVP stock ROM to my I9000M. This is Android 2.3.4. Taken from http://forum.xda-developers.com/showthread.php?t=1011901
Flashed CF-Root-XX_OXA_JVP-v3.7-CWM3RFS on top of it for rooting
Phone works
It needed some tricks this time to upload a file to deivce. For some reason all folders appear to be read only, including dev. So I used abd shell command to change folder permissons
adb shell
$ su
# chmod 777 /data
then exit and
adb push file.fb2 /data
File is stored and is not lost on reboot, like it was for dev folder
Click to expand...
Click to collapse
Thank you for the instructions, tha only reason to look for the jl8 rom is to follow the instructions to the letter. I trying your method right now, thank you for taking the time to give me another shot at my SGS, I will let you know how it goes

another sd card problem... wait - different, really!

hi all,
I cannot see or mount my sd card. It can be read and written in PC, but my u8800 can't see it.
I loaded 2.3.5 official. After some search I rooted it somehow and installed "x5 settings" application (I dont remember why I installed it, damn). After using "selecting internal/external memory" area and rebootings, my sd card cannot be seen by the device anymore. When I plugged, there is an option "turn on usb storage" but it doesnt work, just turning and waiting when clicked. In the storage settings "mount sd card" doesnt do anything.
I formatted the sd as fat32, tried using it when backups restored and not restored. But doesnt matter.
Btw, my internal sd is completely free (as i see in the storage settings) but i cannot see it when plugged in the computer neither.
any help will be appreciated,
ismail
edit: when dload of 136 is in the memory card and opened in pink screen, it gives an "update failed".
edit2: 138 and 162 does the same, update failed. Again, i cannot reach my internal sd.
edit3: the problem may be not the sd card (update fails because I try to downgrade from 526 to 1xx). however i cannot reach internal sd. making downgrade from internal sd may solve the problem, anyone knows a way to reach it somehow?

Have you tried the trick to remove the battery and put the phone to charger and then installing? And after install you put battery back. Also make sure that there is free space in sd. Also make sure there is free space in sdcard. 500MB should be enought.

I put the b136 rom inside sd card. When battery out, if i plug the device, it starts normally. But if <power+-> combination is used when plugging, it goes to the pink screen and waits.
there are 14 gb free space in external and 2 gb in internal sd card.
btw, thank you for your reply.

I think you can mount internal sd in ubuntu while in pinkscreen. This requires you to have ubuntu and unlocked Bootloader. To install ubuntu, use WUBI, which is easy way to have it with windows. Blefish has posted a way to unlock to bootloader. There is a link for it in my signature. After these are ready, plug your phone while it's in pinkscreen to ubuntu, and search for 2gb partition. Then pud dload there and continue like you normally do.

I'm using Ubuntu right now I ll give it a try, thanks again.
edit: tried, but as far as there is no sd card mounted, it seems there is no way to unlock the bootloader. (error: /sdcard/bootloader.bin: cannot open for read: No such file or directory)

On project menu, which is accessible by *#*#2846579#*#*, there is an options menu for sdcard. I think that needed Google option to be enabled. Try to play with the options there(reboot after a change).
Also from X5settings, choose external memory.

acilipatos said:
I'm using Ubuntu right now I ll give it a try, thanks again.
edit: tried, but as far as there is no sd card mounted, it seems there is no way to unlock the bootloader. (error: /sdcard/bootloader.bin: cannot open for read: No such file or directory)
Click to expand...
Click to collapse
Can't you do it the automatic way? Do you have CWM installed?

dancer_69 said:
On project menu, which is accessible by *#*#2846579#*#*, there is an options menu for sdcard. I think that needed Google option to be enabled. Try to play with the options there(reboot after a change).
Also from X5settings, choose external memory.
Click to expand...
Click to collapse
There was google mode selected, i tried the others also. No change. imo, source of all the problems is the "x5 settings". I had installed and remove it many times, but before the last uninstall, i changed the option to "external". Now i dont have x5 settings enabled, and dont know how to reinstall since there is no sd.
julle131 said:
Can't you do it the automatic way? Do you have CWM installed?
Click to expand...
Click to collapse
no, i dont have CWM right now, before the sd card issue, I was trying to install it but the bootloader problem was preventing me.

can you try to install b518 or b517? they are official 2.3.5 betas, but with unlock bootloader.

I am downloading them and will try both.
edit: didn't work. "update failed" problem.

i cannot install CWM because there is no sd card mounted.
also cannot make bootloader work because there is no CWM and sd card.
So not able to install any custom rom from bootloader.
And since my version is b526, i cannot downgrade. (i dont know if the reason impossibility of the downgrade or the sd card problem or not mounting internal sd.)
I will wait the next (final) version. For now, i gave up. Thanks for all

U8800 pro serious problem

Ok lets start from the beginning:
I was trying to upade from 2.2.2 official to 2.3 official and now i'm messed up because after the step : "upgrade sd card" my phone restarted and my usb cabel was still on and phone started charging,after that i tried to turn on my phone.It worked but after 20secs my screens freezes and cant do anything even turn off i need to take battery out,also phone not detects my sim card...
Any idea? My phone is rooted,have installed CWM5.0.2.3,but have no backup only public one...But i can't mount usb storage because i get error like "E:Unable to open ums lunfile(no such file or directory)
ANY IDEAS????
I can get to pinkscreen aswell

If you have an external sd card put the public backup there and try to restore via cwm (if you get boot till there). You can also try the update procedure(the dload folder and stuff) but put them in the external sd card! The phone should boot from there.
Anyway,better wait for more answers since I'm not the best in here.I just know how to flash some custom roms.

Moihack said:
If you have an external sd card put the public backup there and try to restore via cwm (if you get boot till there). You can also try the update procedure(the dload folder and stuff) but put them in the external sd card! The phone should boot from there.
Anyway,better wait for more answers since I'm not the best in here.I just know how to flash some custom roms.
Click to expand...
Click to collapse
sorry for dumb question but microsd = external sd? if yes - then i placed the backup in the card but in cwm only phone memory shows no sdcard...
Edit: external i got that

well it actually is an external microsd card
did you manage to restore via cwm?
P.S. if cwm doesn't see your se card go to advaced->reboot into recovery
should be able to see it now

Moihack said:
well it actually is an external microsd card
did you manage to restore via cwm?
P.S. if cwm doesn't see your se card go to advaced->reboot into recovery
should be able to see it now
Click to expand...
Click to collapse
When i do "reboot into recovery" my phone double restarts and 2nd time it turns on normally not into recovery...

Don't know why this is done,but I think we should be happy that your phone isn't bricked
Maybe someone else here can help you and provide better solutions than mine

Have a read through http://forum.xda-developers.com/showthread.php?t=1639761.
Has a link in it to how I solved my issue of constant reboots.
Also , since you can load pink screen, you can connect through usb and change your recovery to 5.0.2.7. That's the one i used. Make sure that you have a cust.img file in the "image" folder. That is where the recovery should be too but am guessing you already know that.
If for some reason you dont have cust.img you can find and download a generic version in these forums. Did not need it so I did not bookmark the post I found it in but I think it was the Kalo's Honor Port thread in the pro development section.