Hey guys. I decided that I was going to try upgrading to the latest radio 1.50 the other day. And after having a few problems with missing calls I decided to go down to the last newest one. Well same problems. So I basically just worked my way back to 1.41 which I was using before I upgraded
Still had a few of the same problems. Not that many.
So now I went up to 1.43 and so far so Good. But I noticed that when I dial my own number it waits an very unusually long time until it starts to ring.
Wondering if you guys have any suggestions. It screwed me over last night as I was supposed to pick somebody up from the airport and never got any calls because of it.
Thanks
I am using
HTC Official WM6 Rom
1.43 Radio
Cingular 8525
Just tried Hard Reset and still same problem.
I've searched the board alot and havent really found this before.
The phone Rings right away when I hear the other phone ringing.
but when i dial the number there is a good 6 second delay until it actually starts ringing.
hrmm... i try to convince myself "if it aint broke, dont fix it" but when i see new radios and roms coming out I get excited, but now this just gives me more of a reason to stop messing around.
Hi, hope not to disturb you guys with this new thread but I really have a crazy problem on my device: for about a week it looses signal from time to time,especially when in 3g network coverage. Not so strange till now, but I have this issue : during a phone call I suddenly stop hearing the other and the call counter keeps working. It just doesn't want to stop no matter what I press ( red hardware button, touch end call key etc) !! So the call remains active unless I reset the device or wait for about 3 minutes when the call finally stops and the phone looses it's signal for few seconds and finds it again... so I can speak with someone for 20 seconds or more and the thing that I described happens...imagine how ugly is this.
What could it be? is it a hardware problem? I flashed another rom and radio but the problem persisted. Someone reported me a similar issue on his tytn 2 but he solved with a new rom and radio. For me it didn't work
I have two more problems but will describe them later, hope to get some response on this one first...
Regards
What rom do you have flashed, what radio rom, and what carrier are you on?
Have you flashed HardSPL/CID/sim unlocked?
Also: Have you tried the shipped (stock) rom/radio?
If it stays with more than one rom/radio rom, it might be a hardware problem.
Yes, flashed hardspl, sim and CID unlock long time ago. I currently have Schap's 4.30 ( previously had Schap's 4.31) and radio 1.47.30.10 ( had 1.56... don't remember exactly). What's 'shipped' rom/radio?
I think I'll try one or two roms/radio and if it persists...that's it...may it rest in peace.
The roms the carriers put out, see here:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
And, if it keeps up with different roms and radios, then, it probs is RIP, maybe look around the forum to see if there's a hardware fix.
Hello! 1 hour ago I discovered another problem with my Qtek 9100. My phone was ringing, but the display was showing nothing, no incoming call, nothing at all. The phone had resumed from stand-by and in the bottom left corner was showing "CALL STATUS". I pressed the END button, the SEND button and button under "CALL STATUS". Nothing happened and the phone was still ringing. I soft reset the phone by pressing the stand-by button for 5 seconds. Turned the phone on and looked in CALL HISTORY. There wasn't any new call in there. I thought it was my girlfriend, so I called her back and confirmed that she was calling me in that moment. The problem is that she ended the call after 2 "rings", but my phone kept ringing until I soft reseted it (I heard the sound at least 6-7 times -I have windows default ring-). After that I tried to call my number from another phone, and the Qtek was working fine.
What should I do to solve this problem? Is there a problem with the radio version?
Thank you very much!
Maybe....
But men!!! welcome to Windows Mobile world hahahaha the softresets are so helpfulll hahaha enjoy this iste men we are for help.
Maybe is the Radio rom maybe not cause it works fine then isnt it?
So please before upgrade anything more please unlock your phone with HardSPL process and read very well ok?
bye.
RAdio ROM
What version of WM are you running?... when I upgrade my Wizard to WM6 got the same problem, I fixed it by changing to Radio ROM 2.19.11 (t-mobile).
This is supposed to be the best one. Or try other Radio roms until the problem is solved.
Hope this helps
ivojoe said:
What version of WM are you running?... when I upgrade my Wizard to WM6 got the same problem, I fixed it by changing to Radio ROM 2.19.11 (t-mobile).
This is supposed to be the best one. Or try other Radio roms until the problem is solved.
Hope this helps
Click to expand...
Click to collapse
I dont know, my Wizard runs on SNN ROM WM 6.1)),(IPL/SPL 2.26,GSM 02.25.1, OS 10.0.0.10) for more than half year. I had same problems, in this period a few times only. Bt somethimes I cant see a callerID. Soft reset was only solution, I am tired of changing ROMs
Has anyone suffered this problem? Phone rings, I pick up the call, the screen shows connected and starts the call timer but you cant hear anyone the other end. hang up the call and the phone freezes with only a soft reset (taking battery out) works. I have a T-Mobile contract handset and was running the 1.43 rom. I thought maybe flashing to another rom might help so tried the 1.48 update but still having problems. I have hard reset and installed no software but still have the problem. Any ideas guys.....
Since I cant see this problem on the forum I'm guessing its hardware related. I guess I'm going to have to find the original T-Mobile rom and flash it back before returning.
hey, I had the same problem and had even started a thread today. I went for broke and did a hard reset and this has solved it. Back up all your info and hard reset and pronto good to go!!
I wish it was that easy for me. I have hard reset 3 times, the last time I didnt install any software just in case one of my apps was causing the problem.
Everything seemed fine for a day or so then someone called me and it crashed again.
HTC HD2 call crashe Bug
flashflash said:
I wish it was that easy for me. I have hard reset 3 times, the last time I didnt install any software just in case one of my apps was causing the problem.
Everything seemed fine for a day or so then someone called me and it crashed again.
Click to expand...
Click to collapse
it has happen to me 2 times in one month, first time i was listening some musique some one call and as soon the call ended it Freeze.
Another time the phone was on stand by and some one call, and could not answer the phone just freeze.
Why why why Is HTC brilliant
I have the same problem with my WWE HD2. It seems to be linked to music playback off a slow microSD card. I used to get the bug with a Class 2 16GB card if I happened to be listening to music while I received the phone. After tha call ended the playback would resume normally but after a while it would start to stutter (reminds me of a similar bug in the original Diamond, infact) and eventually stop. After that, the phone would just stop responding to any inputs.
After popping in a Class 6 8GB card the issue is gone.
novaci said:
I have the same problem with my WWE HD2. It seems to be linked to music playback off a slow microSD card. I used to get the bug with a Class 2 16GB card if I happened to be listening to music while I received the phone. After tha call ended the playback would resume normally but after a while it would start to stutter (reminds me of a similar bug in the original Diamond, infact) and eventually stop. After that, the phone would just stop responding to any inputs.
After popping in a Class 6 8GB card the issue is gone.
Click to expand...
Click to collapse
Interesting you mention listening to music but for me the crash happens when the phone is in standby, caller id shows, then I hit the answer button and the call timer starts but I cant hear the caller. From then on, I can hang up and then a complete freeze. I wasnt listening to any music, the ring tone is on the phones memory not sd card, so not sure about the sd card connection. After my last HR I didnt install any software except resco file explorer and microsoft my phone. I still get a crash.
I was going to return the phone back to tmobile for repair but it sounds like its software related rather than hardware.
Flash,
Have a look at this thread...http://forum.xda-developers.com/showthread.php?t=468284 , act on it and see if it helps. Phone lockup in the way you described happened to me a couple of times when I first had the phone; no problems now.
WB
wacky.banana said:
Flash,
Have a look at this thread...http://forum.xda-developers.com/showthread.php?t=468284 , act on it and see if it helps. Phone lockup in the way you described happened to me a couple of times when I first had the phone; no problems now.
WB
Click to expand...
Click to collapse
was that the right thread you attached?
Anyone know of a solution to this as yet? Also happening to me - extermely frustrating.
flashflash said:
Has anyone suffered this problem? Phone rings, I pick up the call, the screen shows connected and starts the call timer but you cant hear anyone the other end. hang up the call and the phone freezes with only a soft reset (taking battery out) works. I have a T-Mobile contract handset and was running the 1.43 rom. I thought maybe flashing to another rom might help so tried the 1.48 update but still having problems. I have hard reset and installed no software but still have the problem. Any ideas guys.....
Since I cant see this problem on the forum I'm guessing its hardware related. I guess I'm going to have to find the original T-Mobile rom and flash it back before returning.
Click to expand...
Click to collapse
I have the same problem but only when my band is switched to 3G but not every time.
Daniel
I have had my phone since Xmas no problems, updated to 1.66 ROM and have had this issue twice since.
DexterDuck said:
I have had my phone since Xmas no problems, updated to 1.66 ROM and have had this issue twice since.
Click to expand...
Click to collapse
Me too. i didn't had this problem with Rom 1.43
Found solution guys! It was me not closing down the radio before pulling the headset out. I have not experienced the issue anymore.
flashflash said:
Found solution guys! It was me not closing down the radio before pulling the headset out. I have not experienced the issue anymore.
Click to expand...
Click to collapse
What do you mean by "not closing down the radio" ?
Daniel
Sorry, I forgot the FM bit. In the past I used to listen to the FM Radio and pull the headphones out and the handset I thought automatically closed the FM app down. Any calls recieved on the handset after this would hang the HD2 after picking up the call. Up until the phone rang the HD2 would perform as normal, it was just an incomming call that triggered a crash. You could even make an outgoing call without a problem!
Now I close the FM app (by using the standbye icon on the app) first, then pull the headphones out. Not had the issue again.
Not solved for us that this happens to everytime... i can reset myphone and try to call right after the reset and it still happens.... I cant make a call or recieve a call at all lol
I had the same problem with radio rom 2.06.50.04 and 2.07.50.27 and miri's rom 6.5 v4.0.
Flashing to dutty's HG v0.8 rom with radio rom 2.07.50.27 solved it.
I had the problem with Dutty's v.06 and now have it with RoMEoS Rom....Don't think it is the Rom, and thought it was an app I isntalled until the OP said that he still had the problem with it even with no apps installed...
Bowhuntr11 said:
I had the problem with Dutty's v.06 and now have it with RoMEoS Rom....Don't think it is the Rom, and thought it was an app I isntalled until the OP said that he still had the problem with it even with no apps installed...
Click to expand...
Click to collapse
You might wanna try some different radio roms. Not really sure if it helps, but I guess the radio rom deals with calls etc.
Hmmm alright I will try that, I didn't think the radio rom's would freeze the phone...but I will try that as soon as I can get home.
I've been getting an issue where the other side cannot hear me when I answer their call for the first 5 or 10 seconds. So I end up having to say "Hello" 4-5 times before they can hear me. I"m thinking maybe it's because I'm using a t9193 on Rogers in Canada?
I've had this issue using the Energy Rom with TMO radios, so then I switched over to Dutty's rom with a Telstra radio (2.07), which seemed to work but the battery drained pretty fast...so I switched to another telstra rom (2.09) and the problem came back.
Does anyone else have this problem or is it just me?
yes. i have had the same issue. i have noticed with all smartphones there is always something sacraficed. either the ringtone starts off too quiet or the call doesnt register audio quick enough or the phone doesnt hang up immediately. i personally dont have the 5 second thing happen every time, but it does happen enough to call it noticable. doesnt bug me too much tho.
This wasn't going on from very begining when I got the phone. Mine is Telstra as well but Just started noticing it a while back and wondering if it casued by the actual ROM flashing?
It happens to me on occasion as well, not everytime..but when it does happen people tend to just hang up because they hear nothing (which is quite annoying).
I don't think it is a ROM problem b/c I've flashed Dutty's rom w/ radio 2.07.51 and did not have the delay problem, as soon as I flashed to 2.09.51 though, the problem persisted. Going to try a few other radios.
I'm also having the same issue, from time to time when I answer a call I can hear the other party but they can't hear me for anywhere from 5 to 15 seconds..
Telestra T9193 phone with Dutty's rom (5.2.21893.5.0.90) and radio v2.07.51.22_2 and I'm on AT&T in the northeast..
Has anyone been able to resolve this issue?
Thanks!