Related
Hi guys,
I'm a newbie to the forum and for starters I want to apologise if I'm in the wrong section!
My question:- I want to upgrade WM6 to WM6.1 with the cube effect, what I want to know is where to find the right ROM? My ROM version is 3.4.
If I'm missing anything, can someone please let me know so I can update you guys!
Thanks in advance!
hello,
i've tested a few of the new roms thats floating around on this forum and so far for me the best has been the Ooops Black rom,,
http://forum.xda-developers.com/showthread.php?t=401062
i had to unlock my CID first using the USPL program and once i'd done that i could flash the custom rom,.
http://forum.xda-developers.com/showthread.php?t=308242
there's loads of really good roms available so just test until you find the one thats good for you.
Good Luck
i've unlocked the CID and downloaded the new ROM, but when i run the exe file that us ARTEMIS CUSTOMRUU error comes "the application failed to initialize properly (0x0000135)" now what to do?? how to run the exe file???
Are you using windowsXP??
i couldn't flash it with vista but when i used my laptop that had windows XP on and ran active sync to sync the device it worked no problem..
you have to have it sync'd with active sync.
hope this helps!
sometimes i find that if i put the device in to boot loader it works
so try update, it fails, stick device in to bootloader mode an try again.
thanks you very much
the error came on my pc becuse it did'nt had .Net framework installed..
after installin it everything went smoothly...
I have flashed my orbit with Oops Black ROM, although its very fast,but it has several bugs!! are there any better ROM's floating in this forum?? and if i want to restore my original Orbit WM6.0 OS what shud i do???
what type of bugs have you noticed?
mines running perfect!
yeah there's loads of roms available in the Windows Mobile 6 section of the Artemis forum.
you should have no problem upgrading to any rom available now.
@KevandLynds
Here are some bugs which i found
-> When using mouse mode, the pointer gets disappeared after sometime.
-> When Sliding your finger upwards (like when u wanna start that touchflo3D cube) an error comes and you have to restart the phone
-> Unable to view videos in Picture and Video tool.. although u can view pictures.
-> Cannot add menu items.
some of those are touch flo problems, 6.1 by its self it very good in my opinion, dont have any issues except that if i do a soft rest whilst plugged in to and synced with a PC it wont sync afterwards, need to rest unplugged, bizzar but doesnt happen to often
Guys I'm geting a 270 error.
I've hard reset the artemis and tried it, still doesn't make a difference!
Any ideas?
Thanks in advance guys
KevandLynds said:
hello,
i've tested a few of the new roms thats floating around on this forum and so far for me the best has been the Ooops Black rom,,
http://forum.xda-developers.com/showthread.php?t=401062
i had to unlock my CID first using the USPL program and once i'd done that i could flash the custom rom,.
http://forum.xda-developers.com/showthread.php?t=308242
there's loads of really good roms available so just test until you find the one thats good for you.
Good Luck
Click to expand...
Click to collapse
must be the biggest piece of crap sofware yet stops your phone working and cant put any programs on phone avoid this one
i have made a mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i have downloaded the correct rom version from T-Mobile but it doesnt seem to work
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
as i said on the other post
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index..._Card_Flashing
hope it will work
i think you can get it from here
http://www.tm-phonedownloads.com/sd_compact3.html
if WM6 did not work.. try WM5
thanks i m downloading it...but tell me one thing if there is a software issue then why isnt ther any display i mean no backlight no display no charging led
having same problem with both WM5 and WM6 upgrades!!
"error occur : invalid update tool
this update cannot be used for your pda phone, please get newer update utility"
i think that becuase the bootloader , ISP or one of these stuff are corrupted.. don't know.
and as i told once i got my artemis completely dead
and finally i got it fixed by putting the ARTEIMG.nbh in SD card as they said in the wiki and then by pressing the camera button and the power.
and it started flashing it as the SD card flashing but it took about 30 mins .. and there was three phases in the flashing progress which it was the first time i see.
having same problem with both WM5 and WM6 upgrades!!
"error occur : invalid update tool
this update cannot be used for your pda phone, please get newer update utility"
Click to expand...
Click to collapse
did you flashed it by SD card or RUU?
if you used RUU try by SD card flashing
did u get the same prob? i mean the phone seems to be dead? if so...there is a hope then
well...i used RUU simply downloaded it and tried to install by setup,,, dont know about card flashing but will try
where can i find that NBH file?
do u have that .NBH file?
you have to extract the file you using a program like winrar
there will be few files.. one of them is the nbh
that's how i got the nbh file.
and about the SD card flashing is here...
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Hi,
Help me please just me and that happens to me the mistakes my God.... I had the original ROM version coming with my diamond2, put the upgrading and went well until the moment he arrived at 9% and restart the pda, re-install I think is normal, however the installation continued until k stopped in 18% and after a long time gave a notice of error (262) made the recovery as recommended and continues to give error ....
I do help me please
This just happened to me too
My phone was hardspl´d
It stuck at 18%, but no error message so far. Did you unplug your phone?
Read this:
http://forum.xda-developers.com/showthread.php?t=425913
I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.
Thank you very much fighter, will try that.
I had Official 6.1 Asia WWE installed, HARDSPLed. Tried to upgrade to 6.5 on my computer and my laptop, nothing worked. Both stops at 9%, disconnects, comes back and stucks at 18% again. Had to go back to 6.1, this time it worked to bring phone to life.
My phone was bought in Taiwan.
Guess I am out of luck
I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.
I had the same 262 error as well, screen went blank for a second at 9% and finally freezez at 18% with the error message. Heres what you need to do:
Update your HardSPL to 1.83
Flash 6.5 again
????
Profit!
Hello,
already did everything you say and nothing. I liked to tell me where I can get the former Rom wm6.1 because meeting.
help me please
duongla said:
I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.
Click to expand...
Click to collapse
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks
player911 said:
I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.
Click to expand...
Click to collapse
How can u exit bootloader screen? Only by removing the battery or...?
Thanks!
I do not have with me the adapter card to do this
There is also a problem is that the pda now I do not go the menu with the three colors blue, green and red, until I have done a hardreset and nothing ....
at least I no longer ask the solution with the ROM 6.5 we only have as I had before ... and wanted my pda to work help me please
Little history for my friends with same problem here:
1. Bought Diamond in Taiwan with Chinese;
2. HARDSPL 1.33;
3. Install Asia WWE 6.1 ROM;
4. Try update Official WWE 6.5 ROM, no luck, remove battery and put back;
5. Reinstall Asia WWE 6.1 ROM, everything back to normal;
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too
Hello,
I already installed the previous ROM with the 6.1 and everything was normal.
I tried to install again the OFFICIAL ROM 6.5 and the problem remains back to the error at 9% and 18% for the progress bar giving an error (262).
not understand some things as:
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too
is there any solution?
can help me
Sorry:
1. install Hard-SPL 1.83.OliNex (http://forum.xda-developers.com/showthread.php?t=520312)
2. install 6.5 ROM or Cooked Rom.
It resets 9% again in Official ROM, but reconnects and go to 100% (no stop 18% again).
Dutty ROM no stop at 9% or 18%.
problem solved
thanks for the great help amazing
thank you very much
hello
the memory card is not me out with the official wm 6.5 ROM
what can I do to boot the card?? I have a diamond2
ah no problem of card pk started the card with the adapter to the PC and read it perfectly.
pesquisar
AntonyWatson said:
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks
Click to expand...
Click to collapse
When you run the RUU, the RUU-signed.nbh will be extract temporarily to a folder in driver C:
(For me: C:\Users\Duongla\AppData\Local\Temp\pft51D9.tmp)
Just do a search and you'll find it.
And remember to HSPL to 1.83.
i have the same problem too
hello
i have a diamond 2
ihave olinex 1.83 from here http://forum.xda-developers.com/showthread.php?t=520312 and i can not install ANY wm6.5 rom!!! on the other hand EVERY 6.1 rom i have trie (5 different greek and english) work perfect?!?!??
any suggestions?
thanks
i had the same issue
i was running 6.1 (stock rom) which was hard spl'd
i had the same error kept going to 262 and haviong to be recovered
so i re hard spl'd with the latest one, and it worked fine after that,
Hello all, long time reader first time poster.
I was hoping to find a WM6.5 rom for my Atermis, but every one I've tried fails at 3%. Although have had 1 rom work which was the official 6 rom, upon starting the launch program on the pc had the arte200 picture on the left, and every failed had the p3300, even the uspl program was the same. I did have a 'successful' unlock with the imei change program (can't remember what it's called), but the spl code upon boot was still 3.4.001.
So hoping there is a arte200 6.5 rom that I have missed that someone knows (fingers crossed!)
Many thanks!
USPL!
the reason for it failing on 3% is that your device is not cid unlocked.
download ''uspl cmon''..
i have had same trouble as you, it will and does work, keep trying..
get these files and install them on your phone first, then ''uspl cmon''...
Cert_SPCS
EnableRapi
seemed to work first time for me...
i suggest getting the rom im using, fast and good.. its wm6.1 though..
ive tried plenty of 6.5 roms and i always go back to sheennicks no_nonsense_v6..
sheennicks no_nonsense_v6
http://forum.xda-developers.com/showthread.php?t=455241
sheennicks 6.5 beta
http://forum.xda-developers.com/showthread.php?t=502210
hello
I need a rom of windows mobile 6.5 it was in english and it seemed like one of these
http://forum.xda-developers.com/showthread.php?t=801481 here but at the button of home had one andorid logo not home it had 9slides like andorid do but i cant find it because flashed the rom withot making a back up does any one where to find it.
it had some extras like i could set musicplayer on the first screen,basicly i could set every thing on the desktop. can anyone help me?
I'm not certain, if you are looking for a custom ROM or just Cookies Home Tab CHT , which mainly is the tool to do all the setup, you mentioned.
Greets
yes i think that was a costum rom couse i bought the phone like that.. but now ill try to add this app..thank you
Or you can install nsourm's beautifull rom with CHT included from here
By the way, I'm using nsourm's custom ROM too
Im trying to install one of these roms but it can not be installed. i tryed from sd card too but it says loading...
and i cant install cht too and cookies because the clock and others become to big..
Can you describe the error a little more detailed? I was able to install nsourm's ROM without problems. Did you see the tri-colored screen already?
I tryed to install nsourm_rom_0409.nbh and all of them and cant be installed, i can install roms from shipped roms and those can be installed but this can not...it stuck at 0% and the rom from http://www.filefactory.com/ can not be downloaded Ive downloaded a old one .. couse this says: "All free download slots are in use. You can download this file immediately by upgrading to FileFactory Premium. Otherwise, please feel free to try again shortly. "
You gotta try multiple times, until you get a slot to download a newer version. I tried at least for half a day
The flashing itself worked, but I remember it took more than 10 minutes to finish.
Did I understood right, that you have flashed custom ROM's before?
Greets
I've downloaded the rom and when i try to install it gives me error 262 and it does not continues to be installed stays at 0% ..yes I'have flashed before... but i did not made a backup of that rom
thank you!
so can anyone help me how to put the rom couse it cant be upgraded
Just to be sure i understood your problem: Did you used SSPL with a custom ROM and it didn't work ? What OS do you have on PC ?
yes that is right...im using windows 7 ultimate .It can not be upgradet stays at 0% and then gives an error :S
EROR 262 you can solve this way
- Make shure battery is over 50%
- Soft-reset the device - Don't Skip This Step !
- If is on your PC installed Software-Firewall, Deactivate it (temporery,just to be sure, Reactivate FW later)
- Use orignal USB Kable. (usb data link cable)
- Right click on the RUU.EXE and click on Run as Administrator
- make sure, you choose ActiveSync profile upon connecting the phone to PC
- ActiveSync should be set up completely and Sync connections with Win7 PC should be working without problems before starting with a new ROM
okay thank you guys