Related
Hi there,
My WIFI connection worked fine with a Belkin router I had. After upgrading to a 'Netgear Next Wireless ADLS2+ Modem (router)', I cant seem to lock onto the router.
I type in the WEP Key, but then the arrows of the indicator on the top continue moving showing that no connection has been established.
I am not as good as I would like to be with networking, so I need easy step-by-step advise with how I can set up a connection.
Please help.
Many thanks.
Over 60 views, and no reply!
Anyone?
well since it worked before maybe the question should be posted in the Netgear forum
i would at first upgrade the firmware of the router if possible
Hi
I've not long had my Vario 2 and I had the same problem, it just refused to connect. I looked in the active Station List in my routers config page but there was no sign of my vario's MAC. I thought maybe the wifi was busted so I took it to work and connected fine. Back to my router then, eventually it appeared in the station list but was being reported as failing the WPA authentication. I must have put that key in I don't know how many times before it finally let me in. I don't know how it happenned but I just sat there repeatedly entering the key and refreshing router config screen.
I suggest you try connecting to another wifi network to test your device. Try connecting to yours with security off, then switch it back on.
I just had to seemingly bully my router into letting me connect, but after some time (several sessions over a few days) it did.
Hi there every one...
I got my phone just couple days ago, and I'm really satisfied with every thing , Bluetooth, GPS, Speed, etc...
but I got very interesting problem with the WiFi..
It detects networks, but can't connect to them.. also I can't connect to my home Wirless network,
When I try to connect to any WiFi network, it tries to connect and then it marks the connection with red "x" with comment that the network is unavailable
when I tried to make an adhoc connection with my Laptop, it says that it is connected, and could ping my phone..
tried later to connect to my WiFi network after I disabled all kinds of protections and encryptions and after I enabled the protections again... no good
please help, because WiFi is extremely important feature that I need...
ROM: PDA = PHONE = i780DXHD1
I didn't flash the device, nor touched the ROM...
any help will be very very appreciated
thanx in advance
common guys...
no body experienced such problem?????
please I need your help...
Well... could a 3D party WiFi manager force it to connect ??
if it could... can you please recommend me one?
You havent said much as to exactly whats happening vs what you've tried. Have you tried connecting to your home network with encryption off?If it connects with security switched off, then try connecting with wep on,then switch to wpa.
Well.. I did every thing you said and nothing happened... even after a hard reset...
also what I've noticed is I can't ping my phone on each connection... =(
sometimes it connects and can be pinged....and sometimes not which drove me crazy already =(
do you have any ideas???
Same here, no solution.
chenzo said:
Same here, no solution.
Click to expand...
Click to collapse
WOW... So I'm not alone...
did you try to flash your ROM??
or you didn't flash your ROM like me??..
is this Software or Hardware problem??
how do you think??
a solution
Hi guys... Actually i faced this problem several days ago. I think this is a bug but im not sure since im not expert in this. My i780 can connect to some networks and can't for some. Here is a trick:
In the network device tab, edit the setting of your Samsung wifi card
Change to Use specific IP address:
IP 192.168.0.1
and that's all for now, leave other settings default
Now you can connect to the network but cannot use it. And somehow when you disconnect the connection, the Wifi in your Wireless Connection might disappear. Try to reset the phone and the Wifi is back.
Change the settings back to Use server-assigned IP and you can use the Wifi now. It really works. And now my i780 can connect to any network, lucky me
Ahh, forgot abt this... You can refer to this topic as well. Hope this help
http://www.ppcsg.com/index.php?showtopic=98612&st=200
wifi
try this
http://forum.xda-developers.com/showthread.php?p=2593082
MMS Settings for Samsung i600
Hi there
Is there anyone who can possibly help me with MTN mms settings for a Samsung i600, I have tried *123*12# and it doesnt work.... I am tearing my hair out!!!!
Hi Guys,
I guess this is my first post in this forum.
Does anyone have any problems connecting the HTC Touch HD device to a router with WPA-PSK String setting?
When I entered the details of the Wi-Fi setting, it stucks in the 'Connecting' status.
I did try disabling the security in my router and the device is connected successfully.
Help! Help! Help!
Any assistances will be much appreciated.
ak
Try using a shorter string and see if that helps.
I remember having trouble with my Wizard and WM5. A connection string that was too long would cause this.
My Touch HD connects fine with WPA-PSK, but cannot connect using WPA2, whereas my Wizard with WM6.1 connects WPA2 quite fine.
Anyone else have this problem?
thanks for your reply.
it is very strange though. I did try various settings of the password: 8 characters, 10 characters, 12 characters using WPA-PSK.
I cannot test WPA2 because my router does not support WPA2 .
hm.. ROM update probably
I have a 10 character wpa-psk string, on a US Robotics access point.
worked instantly.
How about the other settings, TKIP/AES etc?
no data encryption settings in my modem router. could that be a problem? But, my TyTn II is connected to the same modem router and I set it to WPA PSK String with TKIP encryption.
My modem router is quite old. I guess this December is his 5th anniversary .
I might try to connect to my neighbour wifi network tomorrow and check the connectivity.
Thanks guys. If any of you still have tips or instructions to fix this problem, that will be much appreciated.
ak
any update on this issue? help required
I am currently using a HTC touch HD Orange UK with the latest ROM from HTC. I also tried DavideUK 6.1 V6 and 6.5 V7.0. In all cases, I could only connect to public wifi networks but always failed to connect to any WPA-PSK routers.
P.S.: I did try enabling/disabling WPA functionality using advance setting/tweaking tools for WM6.X
Has any one manage to solve this one?
Do we know which NIC is in the Touch HD?
Is there any driver update available?
is the WPA-SPK encryption-decryption done via hardware, software or a combination of both?
Thanks for any provided information.
Solution!!! here for Orange UK unlocked handset
Hi Every one, I finally found a solution for the Orange UK unlocked handset and WIFI with WPA-PSK encryption.
It seems like a contradiction but the only way to get it to work is by reintsalling the orange packages & settings on the top of any ROM you are using (tested with stock rom 1.14, 1.19 and DavideUCK WM6.5 V8). So no way to get away from Orange for the moment.
here is how I proceeded:
- installed ROM 1.14, 1.56 then DavideUCK WM6.5 V8
- installed Orange_UK_by_rabdo_v1.6.cab ( http://forum.xda-developers.com/showthread.php?t=311467) and Orangeworld_Fix_by_rabdo.cab (http://forum.xda-developers.com/showthread.php?t=316763)
P.S.: both seem required
- checked with Advanced_Configuration_Tool_v3.3.cab that WPA is DISABLED (Yes it is right, I read on some post that status DISABLED was the solution).
now the rest is basic networking by setting password, static or dynamic IP/gateway/router & DNS.
Remaining questions to Rabdo, Davideuck and the developers here:
- What in those 2 orange cab files solved the problem?
- Do Orange HTC Blackstone have a different hardware than factories? or are they using a software solution to handle WPA-PSK encryption instead of hardware encryption?
- are other branded Blackstone suffering from the same issues?
a BIG THANKS to Rabdo for those packages!!!!!!!
P.S.: no Orange splash screen is included in thos CABs ;-)
Just checked with my HD. It can't connect with WPA/PSK. WPA2/PSK is fine irrespective of key length. Looks crazy. Since my router supports WPA2, I never checked this earlier.
I could never connect to WiFi at work where a long key with funky characters is used (WPA2, AES), and according to our admins no WM device has ever been able to do that. Every other device works fine. So it seems like a problem affecting Windows Mobile in general, not just Touch HD.
I think the Edit Box where U enter the key only allows ascii. If U can bypass it then it should be possible. those deep into WM programming might be able to help.
I've had the HD for about 6 weeks now and it's been working fine with my home WIFI, which is WPA2-PSK. But in the last few days it has stopped working for some reason.
It still says connected, but whenever i try to go online or even just update the weather, the program says it's not connected. It's driving me mad
I hadn't changed any of the settings, so i don't know why it's started playing up. I've triple checked everything and the only thing out of the ordinary that i can notice is that my network key is 8 characters and that's what i enter in the appropriate place, but then when i go back in to check it there are 13 characters in the box. Where are these extra ones coming from? I can't tell what they are because it's asterixed out.
Any help would be greatly appreciated because i'm fresh out of ideas!
Hi just have a new HD.
Everything works fine so far but i cannot connect to my router.
Its a brand new Dlink . Al my other devices connect perfectly (pc and htc diamond)
but my HD says its connected (shows IP etc...) but still i cannot connect to the internet or update the weather...
Any ideas ????
Ebola_virus,
Go to settings>Connections>Connections>Advances>Select Networks. Select My Work Network (For "Programs that automatically connect to internet use:")
Next time use search
dashfield said:
I've had the HD for about 6 weeks now and it's been working fine with my home WIFI, which is WPA2-PSK. But in the last few days it has stopped working for some reason.
It still says connected, but whenever i try to go online or even just update the weather, the program says it's not connected. It's driving me mad
I hadn't changed any of the settings, so i don't know why it's started playing up.
Click to expand...
Click to collapse
Same problem here. This has been reported by too many people.. If you search you' ll find many many threads.
Worked fine, then without any change stopped working. WiFi reports it is connected but no program can use the internet.
Setting slider to full perfomance, using work instead of internet, enabling/disabling WAP security, hard resseting, reflashing nothing works!
At least one user reports "cycles" of good/bad operation without changing a thing !
I too am mad and wondering: anyone had it fixed through HTC service?
If you connect to an access point using the standard interface it will set encryption type as AES as standard (regardless of what your AP is set to)
If your access point is configured for TKIP encryption type then you need to manually go in and edit the settings like I have to in order for it to work.
hth.
Can connect but cannot surf
I have a wireless router that is set up using WPA-PSK. I can connect to the router with my HD, but when I use any browser nothing happens. When I go into the routers settings page I can see that my phone has an ip-nr but still nothing happens. Has anyone experienced this and solved the problem? Thanks.
tintin_en_ecosse said:
Hi Every one, I finally found a solution for the Orange UK unlocked handset and WIFI with WPA-PSK encryption.
It seems like a contradiction but the only way to get it to work is by reintsalling the orange packages & settings on the top of any ROM you are using (tested with stock rom 1.14, 1.19 and DavideUCK WM6.5 V8). So no way to get away from Orange for the moment.
here is how I proceeded:
- installed ROM 1.14, 1.56 then DavideUCK WM6.5 V8
- installed Orange_UK_by_rabdo_v1.6.cab ( http://forum.xda-developers.com/showthread.php?t=311467) and Orangeworld_Fix_by_rabdo.cab (http://forum.xda-developers.com/showthread.php?t=316763)
P.S.: both seem required
- checked with Advanced_Configuration_Tool_v3.3.cab that WPA is DISABLED (Yes it is right, I read on some post that status DISABLED was the solution).
now the rest is basic networking by setting password, static or dynamic IP/gateway/router & DNS.
Remaining questions to Rabdo, Davideuck and the developers here:
- What in those 2 orange cab files solved the problem?
- Do Orange HTC Blackstone have a different hardware than factories? or are they using a software solution to handle WPA-PSK encryption instead of hardware encryption?
- are other branded Blackstone suffering from the same issues?
a BIG THANKS to Rabdo for those packages!!!!!!!
P.S.: no Orange splash screen is included in thos CABs ;-)
Click to expand...
Click to collapse
I had exactly the same problem, followed your instructions (although didn't disable WPA in the advanced config tool, it was already disabled!!). It worked on reboot excellent, and I have a very long network key! Thank you very much for these instructions! :d
- checked with Advanced_Configuration_Tool_v3.3.cab that WPA is DISABLED (Yes it is right, I read on some post that status DISABLED was the solution).
now the rest is basic networking by setting password, static or dynamic IP/gateway/router & DNS.
Click to expand...
Click to collapse
Wow, never would have found this on my own. This is exactly the solution!!! It almost drove me crazy, have tried everything ...
THANK YOU !!!
Uli
Help.....
My Touch HD when I go Starbucks to connect wifi is show connected but cannot access internet, other ppl like notebook or sonyericsson C905 can access internet but why my phone cannot access? anybody know? pls help....thanks
Wifi not working HTC HD2
Hi,
I am using HTC HD2.
I am presently in a university and we have a wifi network here. The wifi network can be accessed by entering a username and password. A proxy also needs to be entered in order to access the internet.
Most of the phones on the campus like iphone or other nokia and samsung phones are able to use the internet very easily. Setting for iphone users are as follows:-
1. Switch on wifi on your iphone
2. Select "Other..." in the list of networks
3. Enter "wifistudent" as the name of the network
4. Select security type as "WPA–PSK 2 Enterprise"
5. Put your username and password
And for Nokia E series the settings are:-
Create a new Connection Name - say e.g. wifi
Data Bearer: Wireless lan
Wlan network home: wifistudent
Advanced Settings (in options)
Enter Proxy Server Address (192.168.32.x) and Proxy Port Number (8080)
Network status: hidden
WLAN network mode: infrastructure
WLAN security mode: 802.1 xs
WLAN security settings:
WPA/WPA2: EAP
EAP plugin settings
1. EAP LEAP
[Options>edit]
User name: xxxxx
Prompt for password: no
Password: *****
2. EAP PEAP (disabled)
(all others disabled)
Based on above information, I want to ask you two questions:-
Question 1) I hope based on above settings for the other phones you can help me find how to configure wifi on my phone.
Question 2) Where do I enter the proxy server so that the wifi network uses the proxy server. Right now I was only able to set up a proxy server for GPRS connection. Not for my wifi connection.
I would quite thankful if you can let me know how to configure the wifi on my phone.
Regards,
Mohit Goyal
Lately I have been reading many post related to Wifi problems in the HD. I had the same. Even I was very near my router I couldn't connect to the net and the signal was very weak.
So I entered my router configuration and I found a solution.
Before, for security options I had: WPA-PSK [TKIP] then I changed to WPA2-PSK [AES] (of course you also have to change your HD connection configuratoin), and now it works great¡¡¡¡
Now I have all the bars for the signal and I can connect very easily.
Hope it works for other people
I have a similar WiFi connectivity problem, but after reading of the poor service provided by most vendors and HTC itself, I will try to gather some more experience with the problem before I contact HTC or my vendor, and hopefully find a solution. Bellow is my experience so far:
I own an HTC Touch HD since January and have a similar problem, only it surfaced last week. Before I had only used the WiFi connectivity briefly. The problems started after I installed an AP on my house expressively for the new PDA. The node is fully open and set to B/G/N protocols.
After a couple days of medium (couple hours per day) use the WiFi connection suddenly quit, the device would try to connect (the top bar showing the WiFi connection animation continuously) and after a few moments gave up with a dialog box stating the current network settings were wrong (even thou they worked fine a few hours earlier).
I tried several hot and cold resets, but only solved the problem after flashing a new ROM; even then the same symptoms reappeared after a couple of days of regular use. Again no re-setting would cure the problem, and now not even flashing the ROM again would work. Nonetheless, some hours latter the WiFi would connect perfectly with the same nodes it refused to before, and in very short time.
I have witnessed this cycle twice and have yet not been able to find a trigger for it, but will keep my eyes open for any tell tale signs, and post any findings here.
I could add to the above mentioned problems.
i got a new hd just few days back.
The wifi worked great. But now it doesnt.
I have disabled wifi, so can start it whenever i require.
I click on wifi button to enable it.
Then open opera, try any website.
it will open fine.
For instance say my email at gmail.com
Now after that if i try to open anysites or even continue with my mail, it shows error saying connection not available.
One of the workaround is to go back to toggele wifi off and switched it on.
Not sure if anyone faces a similar issue.
I's been about a week since my last post and I have already witnessed a couple of cycles of WiFi connecting perfectly and then not connecting at all.
No matter the settings I try after it decides not to connect, it won't. Even to nodes it had connected perfectly and fast jus minutes before.
I thought re-flashing might help but so far has proven ineffective. Once I thought some part of the non-volitile memory was causing the problem since after I cleared the memory I could connect for a while.
Any thoughts anyone?
Same problems here.
For the last hour I have been reading 10ths of threads here concerning WiFi problems.
My HD's WiFi worked fine on my home and outside for about 2 months. Now it doesn't. It reports connection, but no program can use the internet. At best, it seems to be able to exchange some Kbytes the for just a few seconds after a connection is established. Then nothing. Connected but unusable.
Tried everything Internet/My Work/My ISP, WAP enabled/disabled, soft/hard reset, everything.
When connected through ActiveSync everything works fine, all programs see internet.
Has anybody taken their HD to the service? Has any HTC service worldwide identified the problem as hardware and solved it by replacing something?
miskasp said:
Lately I have been reading many post related to Wifi problems in the HD. I had the same. Even I was very near my router I couldn't connect to the net and the signal was very weak.
So I entered my router configuration and I found a solution.
Before, for security options I had: WPA-PSK [TKIP] then I changed to WPA2-PSK [AES] (of course you also have to change your HD connection configuratoin), and now it works great¡¡¡¡
Now I have all the bars for the signal and I can connect very easily.
Hope it works for other people
Click to expand...
Click to collapse
I have just encountered a similar problem, but already used wpa/wpa2 with aes. Have tried a hard reset with no joy. My old HTC Touch has no probs connecting via wifi nor does my laptop so I would surmise that the prob is with the HD and not the router.
I am going to try flashing with the latest version of Duttys 6.1 rom and see what gives.
Edit: Tried flashing with new rom with no success. Take a look at this post.
http://forum.xda-developers.com/showpost.php?p=3769339&postcount=7
There are a couple of files to download but i only used the second ie this one.
http://forum.xda-developers.com/showpost.php?p=1363759&postcount=2
Now no problems and can connect via wifi no probs, ip address assigned by dhcp.
Try to go into WiFi settings and move the power slider to max performance. I need to do it here to access my router. This happened also with my HTC TyTN II, with any recent radio firmware. The original WM 6.0 ROM and it's radio work fine in low power mode, but the new ones appear connected but are always at 1 Mbps and there's no traffic until you move the slider to performance mode.
You go into WiFi settings and you configure manual IP and DNS so as router.
DNS is important.
Whit manual configuration, Wifi work always.
(sorry for my english)
Dubh Llas said:
There are a couple of files to download but i only used the second ie this one.
http://forum.xda-developers.com/showpost.php?p=1363759&postcount=2
Now no problems and can connect via wifi no probs, ip address assigned by dhcp.
Click to expand...
Click to collapse
Yeah, but what if I 'm not Orange-UK (let alone UK) ?
vcespon said:
Try to go into WiFi settings and move the power slider to max performance.
Click to expand...
Click to collapse
1st thing I did. Problem still there.
campotino said:
You go into WiFi settings and you configure manual IP and DNS so as router.
DNS is important.
Whit manual configuration, Wifi work always.
Click to expand...
Click to collapse
This is not a solution. I didn 't buy the device to be able to connect to my home WiFi only. What about public hotspots? Or hotels? Or whatever outside your home?
Hi everyone.
First off, I know there are a million and one other threads.. believe me.. I have searched!
Basically my phone won't connect to my network. It was working fine earlier today. I've tried changing all the security settings in my router (turning off encryption for example). I've tried soft resetting and hard resetting the phone.
Nothing seems to be working. It finds the network fine, but it just says 'Connecting' then goes to 'Available' but it won't use the wifi connection.
Any ideas?
Thanks!
Have you tried connecting your device using a friends wifi router to see if this connect you
Nope. I forgot to add that I will try connecting to work's WiFi tomorrow!
Anything to try in the mean time?
Try these:
1) disable frame bursting
2) disable big packets and other methods of wifi speeding
3) force 11b
4) use WPA-PSK TKIP only
5) check if you have MAC or other access filtering
than let us know
miland said:
Try these:
1) disable frame bursting
2) disable big packets and other methods of wifi speeding
3) force 11b
4) use WPA-PSK TKIP only
5) check if you have MAC or other access filtering
than let us know
Click to expand...
Click to collapse
1) Can't see any settings under my router.
2) Tried disabling gnitro (Belkin router), no difference.
3) No difference
4) Already on that.
5) Turned off.
It's so odd. Works fine with an N95.
I don't think it's anything to do with my router because like I said it worked fine earlier on in the day then suddenly stopped. The router settings hadn't changed.
Edit: I've tried turning the router security off altogether also. I really don't feel it's an issue with my router.
Tested the phone at work. It works fine.. so I don't have a clue why it's not working at home? Surely the router can't be incompatible with the phone.. especially considering it worked at one point.
Very weird! I got fed up with my router so decided to restore the factory defaults and start from scratch.. worked straight away! So I restored the settings back to exactly how they were before (using a backup file I made).. and it worked!
Just posting incase it happens to anyone else anyway.
AltF4me said:
Very weird! I got fed up with my router so decided to restore the factory defaults and start from scratch.. worked straight away! So I restored the settings back to exactly how they were before (using a backup file I made).. and it worked!
Just posting incase it happens to anyone else anyway.
Click to expand...
Click to collapse
Maybe uve tried this already but could be the fact that your home internet access point is listed as Work rather than internet, used to have an issue with mine cause of that.
I also have this problem.
Reset did not help.
Listed as internet or work did not help in both cases.
Real weird!!
I've got the same problem, all of a sudden my hd won't connect to my router.
I can connect to open networks (wi-fi hotspots etc) so i know the wifi in the phone is working ok and my partners diamond can connect ok to my router, so the router is obviously ok.
Have reset the router as well and haven't changed any settings on the phone.
Don't understand!!!!
as other users point out within other threads, it seems that Blackstone has a problem connecting to wifi networks when WPA Authentification is enabled
try to disable it. it worked for me and soem other guys
good luck!
I could connect to my router fine using my laptop.. but I still had to reset my router to the factory settings before it worked again on my Touch HD.. then I could enable WPA and everything back again. So try that!
i thought i had a similiar problem, mine wouldnt connect to wifi, kept switching itself off. figured this is normal when its connected to usb. unplug usb and it turns back on!
I own an HTC Touch HD since January and have a similar problem, only it surfaced last week. Before I had only used the WiFi connectivity briefly. The problems started after I installed an AP on my house expressively for the new PDA. The node is fully open and set to B/G/N protocols.
After a couple days of medium (couple hours per day) use the WiFi connection suddenly quit, the device would try to connect (the top bar showing the WiFi connection animation continuously) and after a few moments gave up with a dialog box stating the current network settings were wrong (even thou they worked fine a few hours earlier).
I tried several hot and cold resets, but only solved the problem after flashing a new ROM; even then the same symptoms reappeared after a couple of days of regular use. Again no re-setting would cure the problem, and now not even flashing the ROM again would work. Nonetheless, some hours latter the WiFi would connect perfectly with the same nodes it refused to before, and in very short time.
I have witnessed this cycle twice and have yet not been able to find a trigger for it, but will keep my eyes open for any tell tale signs, and post any findings here.
Hi
I used to have problem using any secure wireless connection. Then I realized that you need a personal certificate to use secure wireless networks. It uses certificate to encrypt connection between access point. I have access to a windows certificate server so I created a personal certificate with private key and import it to my mobile. Now I can login to any secure wireless network.
A solution has been posted for data connection problems. Can be found here
This may help, may not. Let me know
Fallen Spartan said:
A solution has been posted for data connection problems. Can be found here
This may help, may not. Let me know
Click to expand...
Click to collapse
That solution doesn't seem to work for this problem.
Resetting the router does seem to work.
I don't get why resetting the router works.... other devices can still connect no problems before resetting, so it only seems to be aproblem with the hd.
It also sux when you are using a public router with this problem that you can't reset.
Connecting to Belkin router
Guys, I had the same problem as well. HTC touch HD used to connect to the router fine but after installing an update/upgrade it would pick the signal from the router but would not connect. (I was using WEP authentication at this time)
SOLUTION:
Go to belkin router configuration on the web.
Under security change the Securtiy Mode to WPA/WPA2-Personal(PSK)
Change authentication to WPA-PSK
Select Encryption to TKIP and enter your password.
GO to your HTC touch HD's WiFi setting and turn Wifi ON. Select your home network SSID and edit it using the information you used on the router i.e. WPA-PSK ; TKIP, enter your key/password and click next, next and finish.
Worked for me....hope it helps.
WIFI not connecting
That truly is extremly nasty.
I have the same issue - wifi found, correct password (WEP, WPA all settings) but no successful connection.
Took an old HTC 3xxx - runs immediately.
I can not reset the router - there are too many users, they will kill me then.
So I installed an Access point (Sparklan WX 7800A) to play with.
Notebooks (HP, MSI and ASUS) have successful internet access, also the old HTC 3xxx.
But still the HTC HD does not connect.
Tried "WIFI Monster" - shows the wifi, but does not connect.
(But it deletes all wifi entries easily - so you can set them up new)
Tried with NO security/password: same issue.
WEP, WPA (all kinds): no connection
There must be something to be changed in the registry - but I have no idea what & where.
Or is the wifi that useless ?????
Maybe someone can help
Ciao
Mike
I had the same problem. But the problem stopped when i connect my htc HD to my laptop and used activesync to connect to internet. After i disconnected it, open wifi and... works ok!!