I'm using Hero 2.1 Eclair Version 3.1 via http://alldroid.org/viewtopic.php?f=130&t=539 and after flashing I am unable to connect to mobile network? I have no 3G connection. is there a way to manually add it?
edit: I fixed the problem, nevermind. please delete this thread.
dudebro said:
I'm using Hero 2.1 Eclair Version 3.1 via http://alldroid.org/viewtopic.php?f=130&t=539 and after flashing I am unable to connect to mobile network? I have no 3G connection. is there a way to manually add it?
edit: I fixed the problem, nevermind. please delete this thread.
Click to expand...
Click to collapse
Check the mobile network APN and if non exist create a new one!
But somehow i don't think this could be the problem since the wiki explain that it might be needed to backup the APN info
It should be easy to google your way to the needed APN info for your provider
Related
Hello!
I have Sprint LS980 flashed to Intertelecom Ukraine (EVDO Rev. A) by the NVram.
The problem is that i don't have 3g data connection on AOSP roms, it's just not connecting.
I have data on every stock base Rom and Omni Rom.
Any ideas? Thanks!
Same here. Just flashed my first AOSP ROM (Carbon) and I'm getting 1X instead of 3G at home. Is there a way to update PRL or Profile maybe? Thought it was a ROM specific issue.
Tried to edit build.prop but get no luck to get data work.
Check apn settings
Sent from my LG G2 running Dirty Unicorns!
fma965 said:
Check apn settings
Sent from my LG G2 running Dirty Unicorns!
Click to expand...
Click to collapse
Would be gladly do it if you provide me some "How to", because i can't get APN config and all APN app crashes.
Thanks!
jsergan said:
Would be gladly do it if you provide me some "How to", because i can't get APN config and all APN app crashes.
Thanks!
Click to expand...
Click to collapse
What? Just go to settings > mobile networks > access point names
fma965 said:
What? Just go to settings > mobile networks > access point names
Click to expand...
Click to collapse
Unfortunately on some ROM it's not active , on other one there is no such pass. When i use aps that open that setting aps crashes.
Always thought that NV programmed phones have no need in APNs.
Thank you for trying to help me!
jsergan said:
Unfortunately on some ROM it's not active , on other one there is no such pass. When i use aps that open that setting aps crashes.
Always thought that NV programmed phones have no need in APNs.
Thank you for trying to help me!
Click to expand...
Click to collapse
so im assuming this phone is CDMA? i don;t know as im british so i don't have all this complicated stuff and simply just buy a GSM phone and it works on every network. I am just basing my answers on my on phone.
fma965 said:
so im assuming this phone is CDMA? i don;t know as im british so i don't have all this complicated stuff and simply just buy a GSM phone and it works on every network. I am just basing my answers on my on phone.
Click to expand...
Click to collapse
Yep, it's really a CDMA operator (EVDO rev. A is CDMA) and LS980 is Sprint version of LG G2.
And everything you wrote will work on GSM, but any way thank you for trying to help!
jsergan said:
Yep, it's really a CDMA operator (EVDO rev. A is CDMA) and LS980 is Sprint version of LG G2.
And everything you wrote will work on GSM, but any way thank you for trying to help!
Click to expand...
Click to collapse
Ok so for my confusion, And thanks for not being rude about it like a lot of people would.
I need help regarding the service menu, I think i messed sth up while i unlocked my phone for use in other operators... The phone was unlocked
However now when i have data activated i only get edge, it does not switch to hsdpa. please help i couldnt find any topic releated to this issue.....
Sent from my GT-I9505
which rom do you use?
foxger said:
which rom do you use?
Click to expand...
Click to collapse
i use the official rom downloaded from sammobile, v4.4.2 To be more specific: I9505XXUGNG8_I9505YXXGNH2_SEE
Have you changed operator? Do you have right settings on mobile network access point names?
Sent from my GT-I9506 using XDA Free mobile app
3857 said:
Have you changed operator? Do you have right settings on mobile network access point names?
Sent from my GT-I9506 using XDA Free mobile app
Click to expand...
Click to collapse
ap settings are correct, double checked already...
Berat1337 said:
ap settings are correct, double checked already...
Click to expand...
Click to collapse
Hi mate
Check your network settings/network mode make sure is set correctly , if so try to flash ( odin) a different modem ( or same) see if it help
MAX 404 said:
Hi mate
Check your network settings/network mode make sure is set correctly , if so try to flash ( odin) a different modem ( or same) see if it help
Click to expand...
Click to collapse
thx for your rep, my net mode is set as lte/wcdma/gsm... however, when i set it to wcdma only, on low signal areas the signal drops dramatically, because of freq. change, i keep flashing new modems in order to find the suitable one :/
Berat1337 said:
thx for your rep, my net mode is set as lte/wcdma/gsm... however, when i set it to wcdma only, on low signal areas the signal drops dramatically, because of freq. change, i keep flashing new modems in order to find the suitable one :/
Click to expand...
Click to collapse
Hi
that is an option is most likely a modem issue, you could also see what modem your country operator uses ( check in sammobile) and flas it to see if you get an impovement
Hi
that is an option is most likely a modem issue, you could also see what modem your country operator uses ( check in sammobile) and flas it to see if you get an impovement
Click to expand...
Click to collapse
I already had the newest rom/modem installed since it came out, now I am rolling back all of the modems available in order to find the proper one...
*bump*
I'm totally messed up with Service mode on samsung galaxy duos. Which caused not recognising any SIM. Help me out to reset everything to Service mode default. Thanks in Adv
@Iway76: You get a kudos for searching before posting, even though this isn't the right forum for you. I would recommend attempting to install a stock ROM using Odin, not Kies, and see if that helps. If that doesn't help, you may have to take the device in for service as you may have a hardware issue like mine, where the SIM card tray died while attempting to unlock the S4 - again - and it just was a coincidence that the hardware failed while working on the service menu unlock.
Hi,
The current version of my device is 5.0.1.
I am unable to access mobile data in my device as the Mobile Data(3G/2G) is not getting connected.
Please help me in troubleshooting.
Thanks!
alladivk said:
Hi,
The current version of my device is 5.0.1.
I am unable to access mobile data in my device as the Mobile Data(3G/2G) is not getting connected.
Please help me in troubleshooting.
Thanks!
Click to expand...
Click to collapse
Did you add the Access Point correctly?
abaaaabbbb63 said:
Did you add the Access Point correctly?
Click to expand...
Click to collapse
APN is right. It stopped to work from a few days only.
alladivk said:
APN is right. It stopped to work from a few days only.
Click to expand...
Click to collapse
Try adding a new APN, exactly like the old one.
Are you using a custom ROM? Or are you on the stock one?
Hi all,
Just want to know if anyone encounter similar problem like I do.
I am currently on Wind Mobile network in Canada, I used to get 4G network using the factory DOC4 firmware and baseband.
All the custom roms I flashed, only connect at H+ no matter which one.
I tried changing the sim with the provider and it still the same.
My Device:
Samsung SM-N900W8
Firmware and baseband (the newest DOC4)
Hi.
Did u try to change the APNs for your mobile network??
kurpen said:
Hi.
Did u try to change the APNs for your mobile network??
Click to expand...
Click to collapse
Nope
Then find the configuration on your provider's website and use them. Should work fine just had the same issue
kurpen said:
Then find the configuration on your provider's website and use them. Should work fine just had the same issue
Click to expand...
Click to collapse
Tried and it's still the same. <Mod Edit>
Try to find the best modem drivers for where you are,flash them I recovery. That might help.
Hotspot option gone in settings after updating firmware from ODIN can anyone tell me how to fix that i search on google everybody says reset to factory setting will resolve the issue i tried all the method but not succeed want to flash again from the start?
guess no help around here
please help guys i am tired fixing this issue? no hotspot option shown on phone settings ?
tahasmarty said:
please help guys i am tired fixing this issue? no hotspot option shown on phone settings ?
Click to expand...
Click to collapse
What carrier do you have? You may have to enable it via adb
lvpre said:
What carrier do you have? You may have to enable it via adb
Click to expand...
Click to collapse
I tried the ADB method but nothing happened? i have no hotspot at all in the mobile settings and not in toggle?
tahasmarty said:
I tried the ADB method but nothing happened? i have no hotspot at all in the mobile settings and not in toggle?
Click to expand...
Click to collapse
Not sure why it would be missing since Sprint plans come with hotspot now. Did you flash via odin? Are you on Sprint?
lvpre said:
Not sure why it would be missing since Sprint plans come with hotspot now. Did you flash via odin? Are you on Sprint?
Click to expand...
Click to collapse
No i am not using any sprint services as i am not in USA i use my GSM sim on my mobile and sprint is useless in my country.. yes i flash via odin and after that no hotspot because i was not pas the hands free activation i think i just disable that via "Package Disabler Pro app"
Edit: Problem solved i got the hotspot back with quickshortcut maker app i was use this before but not choosing the correct option so i got it now