Hi ! I have a big problem ...
After listening some music with the handsfree
it seems that the ppc remained stucked on handsfree
I cannot use the phone without handsfree.
I managed to hard reset by using clear storage from settings
but that didn't help
That is very very strange.
How did you switch audio to the hands free? (app / reg hack).
Any way, try the following:
Hold camera + comm manager (left side) + power (right side) and reset. This should restore the phone to factory settings.
I did hard reset, it didn't help
For using handsfree I just plug in the jack.( 2 earphones, 1 mic , volume control , and .. the jack ofcourse )
Sorry, I was thinking Bluetooth. My mistake. (I thought it might be a registry thing 'clean storage' didn't get)
If this is from a wired head set, then I think you have a hardware problem with your connector or the speaker.
This might require a trip to the lab. Is the phone still under warranty?
my mistake
clear storage , it is a function in settings - sistem
and it does the same thing as hard reset
well it still has waranty , but I think I lost it
Just got the same Problem today. Very strange. Not sure if it is a Hardware or Software problem.
if u manage to do something pls let me know
There's a problem with the handsfree connector, as it is too fragile it thends to break leaving the phone thinkinig the handsfree is allways pluged-in... You have two choices substitute it yourself by unsoldering the connector and soldering a new one or to make your warranty active
yes
i realized today that this might be the problem.
but where can I find that kind of connector ?
I live in romania and I am not sure I cand get something
like that from around here
Does it have a special name or smtngh ?
or can u provide a link from an onlineshop pls ?
Basically only just got my SPV M600 yesterday, been faffing with it etc, and now ive lost all sound, have no idea why its not playing music etc, as all the sound levels are turned up.
Is there something im doing wrong? Secret silent button? lol
Cheers
Colin
Ok well, just done a reset to manufacturer standard settings, and still no sound
Col
do you have use a cabel head set?
I didnt get one with it. So answer to that is no.
Thanks
I just want my sound back, my alarm didnt go off this morning, made me late for work lol.
Col
hard reset is the decision...
how would i go about that?
Sorry im new to all of this.
thanks again lads
collywog19 said:
how would i go about that?
Sorry im new to all of this.
thanks again lads
Click to expand...
Click to collapse
just to warn you - you will loose all your information on the device - so take precautions, synchronize with PC... The hard reset is performed the following way - Press and hold the Camera and the CommManager buttons and in the same time reset the device with the stylus. Do not release the Camera and the CommManager button until you see a text asking you to format the FAT. Then press send and you are ready...
so that means ill even loose operating system? how would i go about putting it back on?
Jeez i sound like such a useless bugger, i build pc's for part of my living lol
All this mobile stuff is new to me though.
Thanks
EDIT :
just done hard reset, and its still got no sound
Col
well well, just upgraded to wm6, and still no sound, also, speakerphone in calls doesnt work, i get no ringtone, this is pissing me off lol
I just want my sound back lol
Col
heeelllpp
someone must have an answer lol
Col
ok, just found a 2.5 TO 3.5 JACK THINGY for sale at maplins, will go tmoro and then try headphones on it if that fails then i have no idea what steps to take next
Colin
does it have sound when u plugin ur headset? do you always plugin ur headset to the phone? i maybe think there's something wrong with the headset jack or slot, either short circuit or whatever, i am not sure as i am no expert.
last time my neo also like that..u can try and put the headset back in again, then try to remove it again, but maybe slowly. try a few times and i think it will be ok. from that that time onwards, i never use the headset...bought a bluetooth headset.
it worked fine last nite, and ive never used a headset. thats why im gonna buy a 2.5 jack to try some headphones tommorow, see if i get sound from them. ah well, have it less than a day and it breaks lol
Cheers
Colin
FIXED
was the red wire on speaker lol
w000t
Col
How did you fix that ?
My S200 have the same problem , i have a paper up the speaker on the red wire, but sometimes it rings,and sometimes not.
What is your trick ?
Check out this thread, it may help...
http://forum.xda-developers.com/showthread.php?t=234650
This post is for the Magician, but it may help with your prophet too.
Also, there was talk about a software bug that caused problems like this. The solution was to:
Call voicemail (or somewhere that you KNOW is generating sound)
Plug in your Headset, listen for sound...
Unplug the headset.
I dont know if that was the exact solution. The above post has a link to other posts, as well.
-j
i think your speaker is out. same problem as mine, tried the 'sponge' method & worked for a while, think mine needs to be replaced. prophet speakers tend to have a lot of problems from what i gather...
try searching in the prophet forum for 'speaker' u can find the thread that i'm talking about.
Hi There Like in Topic i install new ROM TIR V12D C WWE and on Monday and everything working before ok, today when i make phone call and speaking with someone i HI HEAR me OK but my Speaker is very Quiet hm i hear someone but a little bit not like before and now its very hard to make phone call ;/ any issue ? or application what can BOOST my Speaker ?
THANKS A LOT
PLEASE HELP ME
The Topaz and Rodium volume controls both have issues.
Installing the Diamond Volume control solves it.
from where to download ? can u post me link to this soft ? Thanks any .CAB FILE ?
Done thanks )
sir, my phone speaker is automatically switching on for incoming and outgoing calls,but not showing speaker symbol, and ear phones also not working .i tried hard resetbut nothing change. please anyone give suggestion
I too get this problem
Not really sure about the solution, but i have a simple work around that works on my p3400 WM6.5
1. Mute the phone (system as well as ring)
2. Restart
Hi to all guys!
I have an LG-E900...and some time ago i get the lg logo problem (stuck on it).
I warmed the Mother Board (the one that include sim/wifi/fm)...i solved that problem but now the speaker dosn't work.
I'll explain it better...
Is like there is always the jack put in the phone, infact if i put in an headset i can hear all.
If I get a call is all mute until I put the loudspeacker mode it's all ok, the phone switch the audio and the microphone&speaker works normally.
1) I've tried to warm again that mb but no result.
2) I've tried to unsolder the jack but same result. (I've soldered it again)
3) I've search on the motherboard something wrong but it seems all ok....=(
So now i'm asking to you all what should i do to solve this problem...
I was thinking...There is no way to modify the phone registry through the MFG for switch definitely the audio on the speaker (or for disable definetly the audio-jack, losing this feature) ?
P.s.
If i go to MFG-> Engineer menu -> Device test -> microphone test and try the microphone, and after that I'll go to try the sound test, the speaker turn on and work until i receive a call or put the phone in stand by.
So i think there is something OR on the O.S. or some faulty fuse....
Anyway some help? Any solution or try will be appreciete =)
Thanks in advance for the answers and greetings from sicily!