Related
:roll: Hi, Hope someone can help. I installed a copy of TOMTOM2 but when I try to open it the message keeps saying "Cannot determine location of data. Please re-install data and or application" I have reinstalled but to no avail.
Can anyone help :?:
Thanks in advance...
Jupiter said:
"Cannot determine location of data. Please re-install data and or application" I have reinstalled but to no avail.
Click to expand...
Click to collapse
Normally this message appears ig there aren't any maps installed.
Install your desired map (or just one map) and it should work....
HTH
Stefan
It did install the map and there was even a 91mb file on the stoarge card. If you click it it begins to install something but then just vanishes?
Not sure what to do.
Thanks for your help though.
Jupiter said:
It did install the map and there was even a 91mb file on the stoarge card. If you click it it begins to install something but then just vanishes?
Not sure what to do.
Thanks for your help though.
Click to expand...
Click to collapse
Searche the tomtom FAQ and they also advise to install a map.
Maybe you should contact them directly...
They should be experts in their software.... ;-)
HTH
Stefan
Reinstall the map using an sd card reader writer, before removing the card, right click on the drive that the card has been allocated ie "E" and click eject, then remove it, sometimes the delayed write function fails if you dont do this and you ned up with a corrupt/incomplete file.
Since I changed my rom to FixixNover 3.3 my Trinity keeps changing the time zone without any explanation.
I searched the forum and tried various solutions but none worked.
I have the "Automatic change time zone" disabled and I haven't used Active sync for some days and today it changed the time zone 3 times.
Is this a problem of this Rom or is it a problem of WM6.1?
I never had this issue when I had WM5.
Anyone can help me solve this issue or knows of a ROM that doesn't have this problem?
check if u install any software that effects time zone.
Flash the ROM again, do not install any program , see if you still have this problem.
motag4 said:
Since I changed my rom to FixixNover 3.3 my Trinity keeps changing the time zone without any explanation.
I searched the forum and tried various solutions but none worked.
I have the "Automatic change time zone" disabled and I haven't used Active sync for some days and today it changed the time zone 3 times.
Is this a problem of this Rom or is it a problem of WM6.1?
I never had this issue when I had WM5.
Anyone can help me solve this issue or knows of a ROM that doesn't have this problem?
Click to expand...
Click to collapse
The new IGO 8 navigation software can change time zone.
Laci30 said:
The new IGO 8 navigation software can change time zone.
Click to expand...
Click to collapse
That's right!!!
I even return to my original WM5 just for test. Everything works fine, ajust the hour and time zone, but after install iGo8, the time zone change everytime I use the software.
Babaloo said:
That's right!!!
I even return to my original WM5 just for test. Everything works fine, ajust the hour and time zone, but after install iGo8, the time zone change everytime I use the software.
Click to expand...
Click to collapse
try modify sys.txt in igo8 folder on sd,
copy this to sys.txt
[timezone]
sync_os_timezone=0
reset_os_timezone=0
this is little bug of IGO8,
I installed iGo 2008 a few days ago. Maybe that's what's causing this.
I'll try that and let you know.
Thanks for the tip.
Try this.
Hope this helps.
it doesn't go......when you use IGO8 and TOMTOM automatically the hour changes to GMT+2....but keep the local time, once you reset the phone or pass a long time....phone detects you are in GMT+2 and less 1 hour. The two solutions proposed DONSN'T GO....i think it something with the Satellites and the configuration of the navigators. Satellites have an internal clock that is configurated to GMT+2.
Go on searching any solution
sanhel said:
it doesn't go......when you use IGO8 and TOMTOM automatically the hour changes to GMT+2....but keep the local time, once you reset the phone or pass a long time....phone detects you are in GMT+2 and less 1 hour. The two solutions proposed DONSN'T GO....i think it something with the Satellites and the configuration of the navigators. Satellites have an internal clock that is configurated to GMT+2.
Go on searching any solution
Click to expand...
Click to collapse
http://marathonclub.sk/sys.rar
download this archive, unrar it, than copy sys.txt to storage card/igo8 folder (must overwrite existing)
http://www.navngo.com/pages/global/eng/igo_8_support_faq/
I don't know why, but it's solved after I delete "welcome center" ,when I cooked my new rom.
Laci30 said:
http://marathonclub.sk/sys.rar
download this archive, unrar it, than copy sys.txt to storage card/igo8 folder (must overwrite existing)
http://www.navngo.com/pages/global/eng/igo_8_support_faq/
Click to expand...
Click to collapse
Tried this but the problem continues.
Everytime I use iGo2008 the timezone changes to +1 Prague...
I like iGo2008 very much but until this is solved I'll have to find another gps software. I don't remember having this problem when I had TomTom.
you need to make the sys.txt modification on the device program files folders as well. Trust me it works!
mohamedmall said:
you need to make the sys.txt modification on the device program files folders as well. Trust me it works!
Click to expand...
Click to collapse
right！！！
Yes!!!! That's it you have to change it in the both files.
Thank you!!!
Please help, I have the same problem... but on my device there is no 'iGo 8' folder, but only on my SD card... and I modified the sys.txt file, and nothing.
I have iGo 8.3.2 on the HTC Diamond2.
Help
Laci30 said:
try modify sys.txt in igo8 folder on sd,
copy this to sys.txt
[timezone]
sync_os_timezone=0
reset_os_timezone=0
this is little bug of IGO8,
Click to expand...
Click to collapse
Thanks! It worked for me!
jakylee1 said:
right！！！
Click to expand...
Click to collapse
Hello,
I have the same problem, I am using IGO8 and have it on an SD card.
I have modified the sys.txt in the igo8 folder, where else do I need to modify?
In the display of my autoradio, the time changes every 5 seconds randomly...
Can you please help?
Thanks
Hey Guys,
on the R2A-ROM I used TT 7.915.9196 successfully.
Now i've upgraded today to the R3A and installed the same Version with the same Installer again.
I installs perfectly but when I start it i got the error:
"Your device is not compatible with this version of TomTom NAVIGATOR!"
What should/can I do?
Thanks guys
Did you install TomTom orginally on your Memory Card? If so everything is still there, just a link in your StartMenu is missing. Have a look for \Storage Card\Program Files\Navigator\TomTom Navigator.exe and you can just run it from there.
Yes, try that! It should work because it worked on mine, same version, etc.!
michaelthemage said:
Yes, try that! It should work because it worked on mine, same version, etc.!
Click to expand...
Click to collapse
May I ask: does it refer to all the apps installed on memory card? I mean - after a FW upgrade it's enough to just run it?
thomas.wie said:
Hey Guys,
on the R2A-ROM I used TT 7.915.9196 successfully.
Now i've upgraded today to the R3A and installed the same Version with the same Installer again.
I installs perfectly but when I start it i got the error:
"Your device is not compatible with this version of TomTom NAVIGATOR!"
What should/can I do?
Thanks guys
Click to expand...
Click to collapse
I've got exactelly the same Problem: Message appears:
"Your device is not compatible with this version of TomTom NAVIGATOR!"
I reinstalled it, but still the same Problem.
Which Version do you use?
Hey Guys,
i've tested to start the exe from the old installation, but the message still appears.
Any ideas?
I'm using TomTom 7.910.9185 with no problems!
Also TT 7.915.9196 working successfully!
thomas.wie said:
Hey Guys,
i've tested to start the exe from the old installation, but the message still appears.
Any ideas?
Click to expand...
Click to collapse
Perhaps because you messed it now up with that installation and some files are changed.
Since I installed tt7 on the memory card, I don't need any installer ever again. No matter if reset or flash. Just pop in the sd card and I run the tt7.exe again. This will automatically run tt7 as if it never was off. (unless you changed the phone/imei no need for new serials with the maps either!)
As to the question if that goes for all other apps, some! Some need a serial again, some don't. Perhaps because some apps put a reg file on the stick. The others will run after a reinstallation creates the necessary reg entries in the phone again.
-Chin- said:
Also TT 7.915.9196 working successfully!
Click to expand...
Click to collapse
With R3A??
If yes, then please PM to me with the installer. Thanks
;-)
looks like not all installation packages do work. A had good results with a package called black, which installed directly on the device. another package blue with additional folders for voices included did not work with installation path on the card. maybe that is helpful for others as well.
Could any kind person post me or email me a copy of BTtrayCE for TP2 as I accidentaly deleted mine and now I can't use Bluetooth.
Info of the file path would also be appreciated.
Thanks in advance.
File attached
Hi clark97
That's wierd because normally if you delete a file in the ROM you just soft reset and it appears back.
Cheers
andrew-in-woking
Cheers , read in another post its because I installed tom tom 7.450 which overwrote it, for some reason a soft reset isn't enough and you need to either recopy or hard reset.
Thanks for reply
Clark
did you get your bluetooth working again? i have the same problem, Tomtom has killed it! Hard reset seems to be the only way to get it back on....
BTTrayCE.exe you will find this file in the \windows\ folder and a link in
autostart(i have delete it, i dont need everytime bluetooth on,
i have a link in the programm folder),
B2T.
when TT overwrite it, normally you can delete it(with TC or Resco)
after a Softreset you have the original BTTrayCE.exe back...
blader said:
did you get your bluetooth working again? i have the same problem, Tomtom has killed it! Hard reset seems to be the only way to get it back on....
Click to expand...
Click to collapse
http://www.htcforums.com/touch-pro2-rhodium-f37/bttrayce-error-after-soft-reset-t2438.html
I had the same problem myself but found the answer on this forum:
TOMTOM places a new BT dlls under the windows folder that I had to remove:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
You can either ename them or remove them and then soft restart your Touch Pro 2 and everything will go back to normal.
Click to expand...
Click to collapse
I personally renamed them, being slightly nervous about deleting files in the Windows folder: still, it worked for me and evidently this fellow on the HTCForums website
Paulplex said:
http://www.htcforums.com/touch-pro2-rhodium-f37/bttrayce-error-after-soft-reset-t2438.html
I had the same problem myself but found the answer on this forum:
I personally renamed them, being slightly nervous about deleting files in the Windows folder: still, it worked for me and evidently this fellow on the HTCForums website
Click to expand...
Click to collapse
Thx a lot !
Lost my BTTrayCe.exe (in fact, not that lost, rather the phone told me : "BTTrayCe.exe is not a valid WM application") after installing TT7.
After renaming the file all came back to normal.
So once again : thank you !
Thank you, that solved my father's problem
Problem solved.
Hi,
I had the same problem after installing TT7.
After renaming the two .dll files all was fixed after a soft reset.
Thanks you guys for your great advise and work.
With regards,
San
thanks alots
TT7 Fix!
Thanks for the Quick Fix!!!!
Where are these files!??!
I'm about to smash this phone!
tibbyltd said:
Where are these files!??!
I'm about to smash this phone!
Click to expand...
Click to collapse
Did you read the thread? It was clearly stated where this file is located.
helps me to thanks!
i have iGo 8 on WinMo and it works fine but when i install it on Android i get a "Please insert your SD card containing iGo 8 content files." is this because the path to the SD card is "/mnt/sdcard/..."? Is there a fix for this yet? or Do we have to wait till NAND? Thanks for all your help
Maybe because igo8 was designed for windows mobile and not android duh. Try igo motonav or igo my way. Dont ask me where to get them. I just know those are made for android. You can just transfer you maps, poi, etc over to the new one.
The problem with iGO for Android is that it is ONLY for HVGA screens yet! no WVGA support for now! The only workaround is to use Motonav which is a redesined iGO for the Motorola phones and WVGA res!
maybe you have license issue with the iGo
only Motonav support WVGA
iGO8 work me, you must have iGO8 folder on the SD card, but it has no 800x600 screen support, so you will see only small screen. Like someone wrote already, MotoNav works great but has very simple UI without special function.
You need to rename the folder "iGo My Way" to
"iGo".
It will work afterwards, though only 1/4 of the screen will be captured, because there are not 800x480 images out there. When I'm driving car, I use WinMob
The best from both WinMob and Android! Hahaha
nemo0405 said:
i have iGo 8 on WinMo and it works fine but when i install it on Android i get a "Please insert your SD card containing iGo 8 content files." is this because the path to the SD card is "/mnt/sdcard/..."? Is there a fix for this yet? or Do we have to wait till NAND? Thanks for all your help
Click to expand...
Click to collapse
wat is iGo 8 *??
The problem with that message is that the phone is with plugged in data cable in Mass Storage mode. Either remove the (data) cable from phone or set to other mode (Charge only).
P.S. So many answers on the net and not even 1 (one !!!) helpfull (what a bore ...). I got this problem yesterday and luckily found the solution. Of course, there's always a chance to get this message, if you are using not paid and not cracked version of the problem.
There is a version of iGo My Way for Android which has a 800*480 resolution actually.
I already replied on a thread about the same thing : http://forum.xda-developers.com/showthread.php?p=9011640#post9011640
Hope this helps.
Mithrandir007 said:
There is a version of iGo My Way for Android which has a 800*480 resolution actually.
I already replied on a thread about the same thing : http://forum.xda-developers.com/showthread.php?p=9011640#post9011640
Hope this helps.
Click to expand...
Click to collapse
sorry to bother, i managed to start the igo (after renaming igo8 folder into igo - otherwise i get "no sd card"), i get the "loading" screen, but at around half of "progress bar" igo just quits, and after a while it says "unable to start .."
any ideas ?
vicai said:
sorry to bother, i managed to start the igo (after renaming igo8 folder into igo - otherwise i get "no sd card"), i get the "loading" screen, but at around half of "progress bar" igo just quits, and after a while it says "unable to start .."
any ideas ?
Click to expand...
Click to collapse
I'm sorry,I didn't notice the reply before now, though I really have no idea how to help you for that..
Mithrandir007 said:
I'm sorry,I didn't notice the reply before now, though I really have no idea how to help you for that..
Click to expand...
Click to collapse
dont worry. i solved the problem .. basicly you cannot use same igo for WM and android. there has to be igo8 (with all its subfolders) for WM, and separate igo (with same subfolders) for droid .. yes, you have to double everything (maps and buildings that takes up most space) but .. if you use 2 systems on one phone, be ready for double stuff on card too
thank you anyway for responding
wixxer said:
You need to rename the folder "iGo My Way" to
"iGo".
Click to expand...
Click to collapse
It was as simple as that.
Thank you for the help!
Much appreciated.
android and win mobile igo8 in the same folder...
vicai said:
dont worry. i solved the problem .. basicly you cannot use same igo for WM and android. there has to be igo8 (with all its subfolders) for WM, and separate igo (with same subfolders) for droid .. yes, you have to double everything (maps and buildings that takes up most space) but .. if you use 2 systems on one phone, be ready for double stuff on card too
thank you anyway for responding
Click to expand...
Click to collapse
You do not need 2 copy's.... let me explain:
Igor for windows has some files in different format e.g. zip.
Ally have to do is copy allthe files that ARE different from android to the same locations as the original. Do not delete existing from either install. Map is shared, poi is shared...
Coals, it all works in both.
Hdfanatic
hdfanatic said:
You do not need 2 copy's.... let me explain:
Igor for windows has some files in different format e.g. zip.
Ally have to do is copy allthe files that ARE different from android to the same locations as the original. Do not delete existing from either install. Map is shared, poi is shared...
Coals, it all works in both.
Hdfanatic
Click to expand...
Click to collapse
hmmm, not sure how can i use shared folder, as android needs folder called igo, and WM needs folder called igo8. with all subfolders needed in those.
so not really see how can .. for example /content/maps be shared in
/storage card/igo & /storage card/igo8
but never mind, as i said .. MY problem is solved and i have working igo.
vicai said:
hmmm, not sure how can i use shared folder, as android needs folder called igo, and WM needs folder called igo8. with all subfolders needed in those.
so not really see how can .. for example /content/maps be shared in
/storage card/igo & /storage card/igo8
but never mind, as i said .. MY problem is solved and i have working igo.
Click to expand...
Click to collapse
Hi,
I followed your instruction from moving the windows IGO8 folder to the root of the sd card and renamed it as IGO (/mnt/sdcard/igo). When I launch IGO (installed IGOMyWay 8.4.2........apk), I have an error message: Missing or incomplete folder: IGO/content/lang
I have checked that the folder IGO/content/lang exists and I have two zip files in the "lang" folder. What did I miss?
NewComer68 said:
Hi,
I followed your instruction from moving the windows IGO8 folder to the root of the sd card and renamed it as IGO (/mnt/sdcard/igo). When I launch IGO (installed IGOMyWay 8.4.2........apk), I have an error message: Missing or incomplete folder: IGO/content/lang
I have checked that the folder IGO/content/lang exists and I have two zip files in the "lang" folder. What did I miss?
Click to expand...
Click to collapse
drop me a PM
vicai said:
drop me a PM
Click to expand...
Click to collapse
It works fine with your advise... thanks alot
NewComer68 said:
It works fine with your advise... thanks alot
Click to expand...
Click to collapse
you are welcome my friend
There is iGo for 320x240, 320x480 and 800x480. Now once you got the right apk for you screen size you still need maps. Here is the link where you can find the LINKS DELETED LINKING TO PAID APPS / WAREZ