Hey Guys,
on the R2A-ROM I used TT 7.915.9196 successfully.
Now i've upgraded today to the R3A and installed the same Version with the same Installer again.
I installs perfectly but when I start it i got the error:
"Your device is not compatible with this version of TomTom NAVIGATOR!"
What should/can I do?
Thanks guys
Did you install TomTom orginally on your Memory Card? If so everything is still there, just a link in your StartMenu is missing. Have a look for \Storage Card\Program Files\Navigator\TomTom Navigator.exe and you can just run it from there.
Yes, try that! It should work because it worked on mine, same version, etc.!
michaelthemage said:
Yes, try that! It should work because it worked on mine, same version, etc.!
Click to expand...
Click to collapse
May I ask: does it refer to all the apps installed on memory card? I mean - after a FW upgrade it's enough to just run it?
thomas.wie said:
Hey Guys,
on the R2A-ROM I used TT 7.915.9196 successfully.
Now i've upgraded today to the R3A and installed the same Version with the same Installer again.
I installs perfectly but when I start it i got the error:
"Your device is not compatible with this version of TomTom NAVIGATOR!"
What should/can I do?
Thanks guys
Click to expand...
Click to collapse
I've got exactelly the same Problem: Message appears:
"Your device is not compatible with this version of TomTom NAVIGATOR!"
I reinstalled it, but still the same Problem.
Which Version do you use?
Hey Guys,
i've tested to start the exe from the old installation, but the message still appears.
Any ideas?
I'm using TomTom 7.910.9185 with no problems!
Also TT 7.915.9196 working successfully!
thomas.wie said:
Hey Guys,
i've tested to start the exe from the old installation, but the message still appears.
Any ideas?
Click to expand...
Click to collapse
Perhaps because you messed it now up with that installation and some files are changed.
Since I installed tt7 on the memory card, I don't need any installer ever again. No matter if reset or flash. Just pop in the sd card and I run the tt7.exe again. This will automatically run tt7 as if it never was off. (unless you changed the phone/imei no need for new serials with the maps either!)
As to the question if that goes for all other apps, some! Some need a serial again, some don't. Perhaps because some apps put a reg file on the stick. The others will run after a reinstallation creates the necessary reg entries in the phone again.
-Chin- said:
Also TT 7.915.9196 working successfully!
Click to expand...
Click to collapse
With R3A??
If yes, then please PM to me with the installer. Thanks
;-)
looks like not all installation packages do work. A had good results with a package called black, which installed directly on the device. another package blue with additional folders for voices included did not work with installation path on the card. maybe that is helpful for others as well.
Related
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.
No problem thanks for your help
dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz
Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.
Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.
It works a treat. Thanks muchly!
Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:
I also managed to 'locate' another copy and it works fine, thanks for all the help.
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?
Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!
sorry ignore that post! Work computer blocked the file out
I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.
Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob
Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.
Tried it. Still get the problem :-(
My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.
Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.
I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.
http://www.tomtom.com/support/index.php?Language=1&FID=3361
Interesting that it says:
"TomTom NAVIGATOR is now compatible with Microsoft Windows™ MOBILE 5.0 devices. See the compatibility list for more information."
And when you go to the list there are no WM5 devices in there :shock:
...but it works :wink:
btw, you don't need to have TT 5 already installed on the system ...just install this verison (5.21) and create a "Voices" directory with your voices files in the root of the ppc ...that's all
mdkia said:
btw, you don't need to have TT 5 already installed on the system ...just install this verison (5.21) and create a "Voices" directory with your voices files in the root of the ppc ...that's all
Click to expand...
Click to collapse
Does that mean you have to register this update with TomTom to prove you're a legitimate user? I guess so.
Still waiting for an official (tested and accepted ) update before I upgrade my legit v3 to a legit v5. (Currently running a cracked version cos I'm not happy that TT5 is working properly on WM5, or even that TT5 is the best solution any more :roll: )
mdkia said:
btw, you don't need to have TT 5 already installed on the system ...just install this verison (5.21) and create a "Voices" directory with your voices files in the root of the ppc ...that's all
Click to expand...
Click to collapse
Does that mean you can do it on the storage card: "My Device\Storage Card\Voices"; or does it have to be on the "PPC: My Device\Voices" ???
SiliconS said:
Does that mean you have to register this update with TomTom to prove you're a legitimate user? I guess so.
Click to expand...
Click to collapse
you need to have the original activation code provided by TT
BillB said:
Does that mean you can do it on the storage card: "My Device\Storage Card\Voices"; or does it have to be on the "PPC: My Device\Voices" ???
Click to expand...
Click to collapse
I have it on \Voices ...dunno if it works on the SD too
So what is different about this version. Or should I say what is fixed in this version? Does it keep the screen in the current screen mode (i.e. VGA or does it reset the screen to it's own bidged semi VGA size).
SiliconS said:
mdkia said:
btw, you don't need to have TT 5 already installed on the system ...just install this verison (5.21) and create a "Voices" directory with your voices files in the root of the ppc ...that's all
Click to expand...
Click to collapse
Does that mean you have to register this update with TomTom to prove you're a legitimate user? I guess so.
Still waiting for an official (tested and accepted ) update before I upgrade my legit v3 to a legit v5. (Currently running a cracked version cos I'm not happy that TT5 is working properly on WM5, or even that TT5 is the best solution any more :roll: )
Click to expand...
Click to collapse
I've installed it twice now and when I go to TomTom Version it still says its version 5.1 anyone else with the same problem, or does someone know something I dont like you have to remove all of tomtom first ????
CarlnAdele said:
I've installed it twice now and when I go to TomTom Version it still says its version 5.1 anyone else with the same problem, or does someone know something I dont like you have to remove all of tomtom first ????
Click to expand...
Click to collapse
version 5.210 (5430) ...but i did a clean install
OK this is strange and i need some help....
i installed the app in my sd card...
i made the "Voices" folder in the root of the ppc...
and i runed the app BUT (this is the strange part)...
i am still in the preferences screen as after i press the screen to choose a preference i can only get to the next step by pressing the button with the red telephone and then maximizing the app again from spb. the moment i press the red button i can see tom tom proceeing to the next screen and then the app minimizes.
any ideas on this?
thanx
So it's not all good news then. Does this mean that TomTom's 5.2 release isn't quite ready for WM5 after all? Can anybody comment on differences in performance between 5.1 and 5.2? Does the screen still redraw slowly?
well it might be my mistake or something but...
so what about the rest of you? has anybody tested it? how did you installed it?
I did a full install on to the Exec, direct from the TT site download. I had hard reset the phone first, yes you do need to add a voices folder in the root of the SD card, but otherwise it all works fine - you can use the data.chk file from 5,1 if you like the real voice warnings, the only thing you can't use is the POIExtend software (yet) Mike
Downloaded the zip file from TT site unzipped it and ran it, it uninstalled Ver 5.1 for me the reinstalled 5.2 somewhere along the way it requested a soft boot.
It all appears to function. However I have not had chance to test it in anger.
I previously had TTNav 5.1 (plus maps, voices, POIs) installed and running succesfully from SD-card.
Installed v.5.21 update, which said it would remove the previous version whilst installing and gave me a choice of location for only one of the .CABs. Afterwards I discovered 4MB of main/device storage had gone missing, so checked and found that the new version had now installed itself into device storage and the old version 5.1 was still in SD-Card. Upon checking the registry I found all the entries still pointed to the old version in SD-card. Tried installing again, same result. Uninstalled and installed again, same result.
Decided "what the hell", moved all the new version files to the SD-card locations, modified the program menu shortcut to start TTN from SD-card, removed their "stupid" Today-plug-in, and fired it up. Now working again from SD-card, and have 4MB of device storage back!
As mentioned before, I feel TomTom have totally lost their way roll with PDA navigation. TTNav5 is just a bodge on their stand-alone TT-Go product code to get it more or less to run on a PDA.
I think it's been observed elsewhere that Tomtom seem to be writing a standard application that will work across all their supported platforms. This is cheaper and easier to support but is frustrating for power users.
I am now using Navigator 5 in addition to Mapopolis, and I find the delay in connecting to my Bluetooth GPS (GlobalSat BT338) very annoying. There is nowhere to specify baud rate and I am sure that Tomtom every time is scanning the range to find the GPS, it takes so long.
This makes TT fairly idiot-proof and user-friendly, but at the expense of the more technically minded. Of course, supporting technical options ties it closer to the particular operating system, which is probably what they are trying to avoid doing...
Hi all,..
when I use the update from the TT website, and installed it is asks vor an registration code, the activation code...
does anyone alse have this problem?
a
Hi everyone.
Please can you help me to install tomtom 7 on my HD/Blackstone. This is my first PDA/phone like this , and I am kinda struggling.
I have downloaded the Tomtom 7.910.9185, with maps of western europe 1gb.815.2024
The package I downloaded had 3 versions of tomtom7 compressed.
QVGA black, QVGA blue, VGA black.
I am now lost, I have read about cab files, sending to the root file of the storage card, but I cant figure this out.
Is there an idiots guide, (I am a total newb and Idiot) showing how to do this. Maybe one of you guys has a webpage or thread with it all easily put down.
Your help would be most appreciated please.
Rgds
Neil
RTFF and you find this http://forum.xda-developers.com/showthread.php?t=432410
TOM TOM 7
You can install all versions. The best is the VGA . I Have it on my HD . Work fine .
Fritz Thecat said:
You can install all versions. The best is the VGA . I Have it on my HD . Work fine .
Click to expand...
Click to collapse
Does it have bigger POI icons?
Cause i've installed QVGA , it's full screen and looks nice but hte POI icons are little.
Or maybe that just tomtom 7
Hi,
I don't know if you already found how to do this but i will try to give you a simple guide:
1. copy the file VGA black.cab to your SD card root.
2. click on the file once (a .cab file can be compared to a .exe file on a pc)
3. After install, copy your map western europe 1gb.815.2024 to the root of your SD-card. Make sure that when you open the folder of the map, you should see files and not another map otherwise it won't work!
This should get you up and running tomtom 7.
POIs are small 'cause the TT version available run quite correctly on HD, but IT'S NOT the right version for HD, simply it doesn't already exists
Thanks,
Have managed to get the program to install, but no hope with the maps.. Keeps saying they aint activated..
Liquizen said:
Thanks,
Have managed to get the program to install, but no hope with the maps.. Keeps saying they aint activated..
Click to expand...
Click to collapse
So the problem ain't the software itself, is the map activation. You have 2 choices:
1: click here http://www.tomtom.com and have your VISA ready, or...
2: MOD EDIT....WAREZ ARE NOT ALLOWED HERE
hi newbie here, struggling to install...
hi guys/..
i downloaded a version of tt7 from this site to my touch hd. i then had to go and BUY a UK map for £39.95 from TomTom. i followed the instructions to install it, but i'm getting an error code, stating the version of TomTom i have installed is INVALID????
can anyone point me in the right direction for the VGA black version please??
cheers
Vida...
i got the free map installed and working perfectly - BUT, i've still paid £40 knickers for somethin i can't download....
i need some ides please guys...
many thanks for the app btw, just needs to be a valid one so i can get my frickin mapo!!! ha
cheers
Tomtom navigation - where to install maps
Hi all,
I'm spend a lot of time on many forums to find how to propp install Tomtom navigation (I'm using Tomtom 7).
Installing a Tomtom program is so simple but the maps thats another storry.
All informations what I'm found was telling you need to create a folder "maps" in root of the memory card and than copy all files from your PC folder of actual map there. That information is OK just if you want to use a single map.
Problem is if you want use more maps than one.Yo just simple can't coppy contens of two or more maps into the same forder.Or if you try to copy whole folders with maps into yours "maps"folder on your card the Tomtom not see that.
So what to do ???It's really simple.
1. You do not need to create the "maps" folder
2. All what you need to do is copy whole maps folders into the
" My Documents " folder on your storage card (not on" My Device " memory !!! )
Its work perfect,I'm use more than 3 maps (UK+IR, Western+Central EU, Eastern EU,...)
So maybe this info help some people whos need more maps.
Richard
I purchased the map from TOMTOM website, but when I tried to install it using tomtom home, it doesn't allow me to download
vidamusic said:
i got the free map installed and working perfectly - BUT, i've still paid £40 knickers for somethin i can't download....
i need some ides please guys...
many thanks for the app btw, just needs to be a valid one so i can get my frickin mapo!!! ha
cheers
Click to expand...
Click to collapse
Hi stevenyu24, vidamusic et al with TT7 issues. Suggest you read through the thread
http://forum.xda-developers.com/showthread.php?t=432410&highlight=TomTom and pay special attention to bmcconalogue post. All your problems should be solved there.
Best regards,
Just for you guys,
I have Tomtom Home 2.6 installed on my macbook and I can get MapShare working free with my TomTom navigator 7 installed on my Touch HD.
Just connect it as a Disk Device then when TomTom asks which device to use, choose the one on the Storage Card (the map is on the storage card and the app is on the internal storage)
Then, you will get free maps' correction !
After installing TomTom 7 (Version 7.450.9028) together with the map folder Western_and_Central_Europe-v7.20.1803, I was guided through the initial settings questions as well as a tour of the program. On starting TomTom (after the flush screen had been shown), I now get this error message:
Unable to start
Not enough memory is available
B***it! There are 277 MB on the system and 2 GB on the storage card available.
A soft reset has of course been done.
How can I get rid of the error message, what do I have to do in order to use TomTom properly?
Edit: I have seen all the other threads about this issue. Still, I don't find a solution for myself.
you need the newer version and it will fix you issue. also use cleartemp tool to delete temp files!
nagging said:
After installing TomTom 7 (Version 7.450.9028) together with the map folder Western_and_Central_Europe-v7.20.1803, I was guided through the initial settings questions as well as a tour of the program. On starting TomTom (after the flush screen had been shown), I now get this error message:
Unable to start
Not enough memory is available
B***it! There are 277 MB on the system and 2 GB on the storage card available.
A soft reset has of course been done.
How can I get rid of the error message, what do I have to do in order to use TomTom properly?
Edit: I have seen all the other threads about this issue. Still, I don't find a solution for myself.
Click to expand...
Click to collapse
Nighthawk2050 said:
you need the newer version and it will fix you issue. also use cleartemp tool to delete temp files!
Click to expand...
Click to collapse
Nice to hear about this. Could you please let me know which version you 're exactly talking about? Thanks.
Version 7.450.9028 works perfectly on mine. try uninstalling and reinstalling it
winwiz said:
Version 7.450.9028 works perfectly on mine. try uninstalling and reinstalling it
Click to expand...
Click to collapse
I had this version before, but it has small keyboard when trying to choose POI. Also the splash screen is a little ugly as it does not cover the entire screen. No big deal, but why not use 7.910?
With both version, I could run Garmin in the background while Tom Tom remains quick. No lags whatsover. So, something is holding up causing the error message.
Tomtom have released a new version of there software specifically for the TP2.
Version is 916.9189. Have installed but not tested yet. All traffic is working on this version unlike the previous release.
can only be installed on TP2 and maps of course still need to be purchased. They are including this with new purchases of the phone now.
If someone can confirm if ok to post the link ?
Thanks
ok link is below, if not ok please remove the link
Here
edit from Sleuth
The app itself isn't warez since it encourages you to load up a free local map then buy commercial maps if you like it. Keygens for the maps are warez and not permitted.
With this in mind, I took the liberty of modifying the cab in your link. First, I removed all the BT drivers simply to make the cab smaller. While your original cab does have the BT drivers, the install script only loads them if they aren't already there so no overwriting occurs.
More importantly, the modified cab includes a version of 916.9189 that lights up the contact navigate button. I've placed a link to this modified cab on this post
TomTom is a great navigator. If you enjoy playing with the free map, go out and purchase legal maps from TomTom. The more WM platform purchases TomTom gets, the more they will be incented to continue to support and improve this excellent product.
could you post a link to download?
thank you
ok link is below, if not ok please remove the link.
LINK
Will this version screw with the BT stack? Also, if you already have maps, will it request you to register maps again?
A further question: any help with the lag issue that many (inc. me!) are struggling with?
I doubt it - but had to ask!
shawndh said:
Will this version screw with the BT stack? Also, if you already have maps, will it request you to register maps again?
Click to expand...
Click to collapse
I have already upgrade, and did not have any issues. Everything works great on my TP2, no slowdowns for me.
Does Tom Tom say the street names?
Thanx. Appears to work well. I'll test it tomorrow.
How about the TMC function ????
Total Noobie question here!
I currently run version 7.450, I have downloaded the new version, but what do I do with it, if I run it, it works, but I have to run it from file manager, as opposed to the program icon, how do I install it correctly?
Apk1 said:
Total Noobie question here!
I currently run version 7.450, I have downloaded the new version, but what do I do with it, if I run it, it works, but I have to run it from file manager, as opposed to the program icon, how do I install it correctly?
Click to expand...
Click to collapse
Goto file explorer, copy the tomtom file, then goto my device/windows/start menu/programs folder. then hit the menu to "copy shortcut" in this folder. You will now see an icon in the programs folder for this version of tomtom.
If you already have tomtom installed you may want to uninstall it first or just delete the shortcut(s) from the programs folder so you know which one you're using.
Works for me. Would like to know what the changes are.
dazultra2000 said:
Works for me. Would like to know what the changes are.
Click to expand...
Click to collapse
Yes please.
Thanks.
shawndh said:
Goto file explorer, copy the tomtom file, then goto my device/windows/start menu/programs folder. then hit the menu to "copy shortcut" in this folder. You will now see an icon in the programs folder for this version of tomtom.
If you already have tomtom installed you may want to uninstall it first or just delete the shortcut(s) from the programs folder so you know which one you're using.
Click to expand...
Click to collapse
Thanks Now working ok
The main improvement is that now the keyboard works fine on the TP2 with TT7
right i tested this on the way to work this morning, for me the lag is still there so no improvment. the traffic does now work which is one thing but still a definate lag compared to my tytnII which was spot on. This is with the new rom from HTC on it as well the one with copilot preinstalled.
sdcard is a class 4 so dont think it is down to that either, shame as i really thought they would sort the lag out.
anyone else?
I get a not enough memory error when trying to install this. What am I doing wrong? Stock TMo US.
shawndh said:
Will this version screw with the BT stack? Also, if you already have maps, will it request you to register maps again?
Click to expand...
Click to collapse
Would like to know that too!!!
credinho said:
Would like to know that too!!!
Click to expand...
Click to collapse
No problem with Bluetooth. I already had a previous version of TomTom installed. Just unzipped the .zip file into program files\navigator and it worked.
You don't have to reregister maps.
I was asked to join MyMaps or something like that. In which you can manually edit maps to keep 'm up to date. Also you can subscribe and download eachothers updates.
vdKarel said:
No problem with Bluetooth. I already had a previous version of TomTom installed. Just unzipped the .zip file into program files\navigator and it worked.
You don't have to reregister maps.
I was asked to join MyMaps or something like that. In which you can manually edit maps to keep 'm up to date. Also you can subscribe and download eachothers updates.
Click to expand...
Click to collapse
I was trying to install it now, but I first unnistaled the old version that I had I now I can't install this one.... probably I have to re-install the old version right?
Edit: It worked... I think. But now saiys that I've to activate the maps again.... let's see.