i have old htc p3400.i wrong hspl with oref method.now it is bricked.when i try to flash any rom error code 300 appears.invalid update utility.i tried almost all roms but no result.phone only show try colour screen.plzzzzzz help
sunnymobile said:
i have old htc p3400.i wrong hspl with oref method.now it is bricked.when i try to flash any rom error code 300 appears.invalid update utility.i tried almost all roms but no result.phone only show try colour screen.plzzzzzz help
Click to expand...
Click to collapse
try unbrick tool . and first thing read thread very carefully
Related
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
guerilladev said:
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
Click to expand...
Click to collapse
Re-flash USPL and try again.
Panic over, thanks very much Shand359!! Its working just fine now. I guess the SPL was too high eh? I did try to reflash with uspl at first but it seems the copy that I had on my pc was corrupt, i downloaded it and its flashing a new B&B3.7 right now. Thanks again!
Glad you got it going.
XDA ORBIT
Hi guys,
I have trouble with my orbit.
It is german and i want to change it to English,
i suppose i have to flash it before using the new english rom..
I do not know anything about this things..
Please help. Thank you...
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
baboon99 said:
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
Click to expand...
Click to collapse
First of all, thanks..
I did, and it said updated. I thought it is done..
And i will try to load english rom..
But i scared to do this action because i do not wanna lose my device.
I suppose i have to use it on german language...
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2
Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????
no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---
So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck
almost 50 views and no help
somebody please help me out
Goshdarn invalid vendor id
megagprime said:
So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck
Click to expand...
Click to collapse
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.
ookba said:
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.
Click to expand...
Click to collapse
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.
sorry about the late reply
i have tried the willow spl (that was my original path)
didn't work can get my spl hard lol
still need help, i think she is bricked
i got the ceda100 boot loader up and cant flash willow or cedar hard spl.... or anything and it doesnt even boot up into windows or anything anymore possibly shes a nice shiny brick
ariesq said:
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.
Click to expand...
Click to collapse
hey i got another snap and am ready to flash again but dont really want another paper weight, all i really need help with is usb tethering that doesnt use pam/let my carrier know i am tethered....
i need internet connection sharing like my snap needs a hard spl
different computer, cables, compatibility modes, etc
nothing works
My friend
i have the exact same problem
Bieng researching for the past few days, spent hours on this
Did u find a solution?
I could really use some help right now
Thanks
Hi
Please be sure your phone is HardSPL before testing/using this rom.
download below rom and happy using win 6.5
http://www.mediafire.com/?s59k13tugcw03i4
i am using this on my ALLTEL HTC SNAP SMT 6175
WORKING FINE.
[email protected]
bye/punnoose
Hi all , my data speed and reception dropped after i put WP7 on my hd2 so i decided to try a new radio on it. My radio is 2.15.50.14 now and had not being giving me problems prior to wp7. it's was excellent on android. i'm trying to flash to 2.12 but every time it starts i get error 244 invalid model id. i searched on the forum but havent been able to find any info on it. What do i need to do? somebody help a brotha out. much appreciated in advance . thanx
Which version of HSPL is on your device? I´m not sure, but if you have a correct Radio ROM RUU, this error should not be there... maybe you must download the file again.
Flash winmo 6.5 then try?
i tried to go back to win mo 6.5 and i get the same error for the device id. could it be because of the hack to make it seem like a hd7. since that is what it says in my phone hd7
Same here I'm not able to flash any ROMS at all since WP7... HELP?
maxtap said:
i tried to go back to win mo 6.5 and i get the same error for the device id. could it be because of the hack to make it seem like a hd7. since that is what it says in my phone hd7
Click to expand...
Click to collapse
I am 99% sure you´re either having broken files, or you´re trying to flash a wrong ROM (wrong language, non-branded ROM for branded device), deleted HSPL or whatever. I am also 99% sure you didn´t read all the stickies. Please excuse me if my statement feels rude.
JJP981 said:
Same here I'm not able to flash any ROMS at all since WP7... HELP?
Click to expand...
Click to collapse
Same here.
Here is my problem:
My car is broken. What should I fix?
Please try to be as specific as possible, otherwise, it´s really difficult to help.
good day..just now i try to install back to my original Rom from MonfroROM OpalOPlus WM6.1.21057 18mar2011 to OPAL original ROM 1.35.xx.xx ..after all the installation finish then i saw some msg from my phone :-
ONBL 1.27.0000
SPL 2.00 cmon
F256
"YOUR OS ROM ISN'T CUSTOMIZED FOR YOUR HARDWARE.
PLEASE REF LASH THE PROPER ROM CODE OR CONTACT THE
SERVICE PROVIder."
now the question is.. how to i install back the new rom without use activesync (my pc active sync cannot connect to my phone because this problem?
please need some advice to solve my problem thanks for all member..
9w2tln said:
good day..just now i try to install back to my original Rom from MonfroROM OpalOPlus WM6.1.21057 18mar2011 to OPAL original ROM 1.35.xx.xx ..after all the installation finish then i saw some msg from my phone :-
ONBL 1.27.0000
SPL 2.00 cmon
F256
"YOUR OS ROM ISN'T CUSTOMIZED FOR YOUR HARDWARE.
PLEASE REF LASH THE PROPER ROM CODE OR CONTACT THE
SERVICE PROVIder."
now the question is.. how to i install back the new rom without use activesync (my pc active sync cannot connect to my phone because this problem?
please need some advice to solve my problem thanks for all member..
Click to expand...
Click to collapse
you have to flash this roms bro: 1.26.xx.xx or 1.27.xx.xx
it's simple
thanks for the member my problem solve already many thanks...
There's a connection error: 260, while upgrading my htc touch viva..
hiten.shah said:
There's a connection error: 260, while upgrading my htc touch viva..
Click to expand...
Click to collapse
look your fix
http://forum.xda-developers.com/showthread.php?p=13718646#post13718646
mehulkarate said:
look your fix
http://forum.xda-developers.com/showthread.php?p=13718646#post13718646
Click to expand...
Click to collapse
Help..!!!!
I tried but There's a connection error: 260..