Hello i buyed new leo 5 days ago when i get up today morrning i have huge problem i cant charge it.... when phone is shutdown and i stick charge cable led show orange after 2 sec start blink and change color on green....(when im turn on it batery icon dont show up that i charge it too and when i connect phone to computer its show me data connection but dont charge it either) i try soft reset/hard reset and dont help at all i must send phone to repair ??
This is th first time I heard it
i fix it i clean batery pins ehh...
Try this
in sense UI go into settings tab.
Right soft key 'menu' and choose 'all settings'
go into 'system' folder and choose 'Device information'
choose 'battery'
and uncheck the box 'When phone is on, do not charge the battery when connected to PC'
Related
Today in evening my cell phone switched off after the battery died.
I put in the USB charger and once it started to charge I instantly at that moment switched it on, it showed the blue startup screen and vibrated and shut off again (I presume it was not charged enough at that moment to be switched on), I again instantly switched it on as it was charging, it showed the blue screen again, gave a long vibrate and shut off. Since than I have not been able to switch it on at all. It dosent even vibrate or show the blue startup screen at all.
The red led on top is on as it is in charging mode, but it has been like that for past 6 hours, after few hours the red led turns off automatically so I had to unplug and plug it again to turn the charging on again.
I have been pressing the power on button but nothing happens, I even tried doing the hard reset but nothing happens. Except the red charging light it has been dead for past 6-8 hours even after I have been charging it for that long.
What should I do?
And the bad thing is I live in US and got this phone from UK, so I dont think I have any warranty as www.expansys.com mentioned it earlier that this is UK based phone and their is no warranty in US.
I'm not sure you can just brick the hp by charging it. Try the following:
1. Remove the battery and plug in the charger. The ipaq works without battery only on external power.If yours doesnt, then the battery isn;t causing the problem.
2. Remove all sim and micro sd cards if you have put any. Leave the ipaq only as it is out of the box.
3. If it doesnt turn on either way, you have to try to restore the rom.
How to do that? Easy.
a) turn the device off. put in the battery and plug in the charger. Then press the record buton (on the right, just under tha jog wheel or whatever it's called)
and while holding it, pres the power on. It should turn on and over the blue screen ypu see "clean boot" Just leave it, take a deep breath and wait. DO NOT TOUCH IT until it boots windows and asks you to tap the screen. IF nothing happens you have anther option - go to the HP site and find the rom update - it's 53mb and it's a little tricky to find. Then turn the device off and run the rom update utility from PC. If this doesn't work, then i sugest you contact HP support online chat and ask for help (Not likely to get any).
READ THIS:
http://forums11.itrc.hp.com/service...277571&prodTypeId=215348&prodSeriesId=3544506
Just do some research. Google it. Go to the hp site and try to find someone with the same problem.Don't just sit there. You have INTERNATIONAL WARANTY. In the worst scenario you can send the davice to HP in the UK and get replacement unit. If you haven't dropped, spilled on with water or charged with higher voltage(which i think you can't do in the US, as you have 110v circuits.) you can call HP support in your country, bring it there and just ask for replacement.
Don't try to flash it with roms provided on the site - it's not for first time users. Read, research and ask, before destroying your device.
axlastro said:
I'm not sure you can just brick the hp by charging it. Try the following:
1. Remove the battery and plug in the charger. The ipaq works without battery only on external power.If yours doesnt, then the battery isn;t causing the problem.
2. Remove all sim and micro sd cards if you have put any. Leave the ipaq only as it is out of the box.
3. If it doesnt turn on either way, you have to try to restore the rom.
How to do that? Easy.
a) turn the device off. put in the battery and plug in the charger. Then press the record buton (on the right, just under tha jog wheel or whatever it's called)
and while holding it, pres the power on. It should turn on and over the blue screen ypu see "clean boot" Just leave it, take a deep breath and wait. DO NOT TOUCH IT until it boots windows and asks you to tap the screen. IF nothing happens you have anther option - go to the HP site and find the rom update - it's 53mb and it's a little tricky to find. Then turn the device off and run the rom update utility from PC. If this doesn't work, then i sugest you contact HP support online chat and ask for help.
Click to expand...
Click to collapse
When I tried step 1, all LED lights just started blinking, I tried powering it on but nothing happened.
Tried restoring ROM by pressing the buttons you mentioned but nothing happened. No power no clean boot, just switched off.
I downloaded the Rom from HP website and strange thing is to download it I selected the option on HP Website 'Detect my device' and they did detected my Ipaq 614C, but after running the file it goes to the screen 'Please wait shile the device state is verified' and than it fails to recognise my device!
Even when I know everything is firmly attached.
What is the PC you're using. Can you try to plug the usb cable in another slot.Did your ipaq work at the beginning.
Do you have Active Sync 4.5 installed? XP or Vista. XP is recommended. Is the update 53Mb (not the 1 mb one). When having hardware problems, the trick is to alter the variables - use different connectors, cables etc, different settings and so on. This ipaq is cheap for a reason - there are lots of faulty units, but that's why waranty is for - if you have a document for the purchase, you have international waranty. That's it. Before going to HP service center, try all possible options mentioned here again on a different PC with all the software needed - Active Sync 4.5 and usb drivers that may be included in the CD that comes with the ipaq. If the HP website recognises the devie it's almost sure you don't have a brick, as it probably verifies the EBOOT - the most vital part of your device's memory. Try upgrading a few times no matter the error. Restart the pc and so on. My advice - ask for online support or just call HP support. Be insistive but polite. If they say "go to the service center or something like that" just continue asking. Write down your case ID. Use online chat help on the HP site, even though your device is not listed, choose IPAQ 500 or 214 and just enter the SN and PN (on the back, under the battery) and Tell them your device model.
http://forum.xda-developers.com/showthread.php?t=426418&highlight=614c
Probably WAY too late but I've just acquired a sickly 614C which I've nursed to health.....
There seems to be some bizarre issue with the charger in the 614c so that if the battery level falls too low, it requires a mains-connected USB charger rather than just the USB port on a pc/laptop.
If your 614c is the same as mine, the red LED will be pulsing very slightly when connected to the USB port but a solid red when connected to a mains USB charger.
Once the LED turns amber, it can then be connected to the USB port for further charging. It looks like it just needs an extra boost when the battery is completely flat.
HTH!
hi
i had the same problem when i left my phone uncharged for over a week. after reading about the same issues some of us encountered i came up with a simple idea that worked. i just connected the charger to the phone and long pressed the reset button (over a minute) till the red blink dissapeared and slowly the amber one took its place then i left it to charge.
My 2 months old Touch HD doesn't charge the battery anymore.
If i plug the power cord, the notification led turns red for 5-7 sec., then it turns off, and the battery meter shows no charging.
I can sync it with PC but runs again on battery, even the check box (under the power meter) is unchecked.
The only way to charge the battery, is to let the battery drains out (the phone turns itself off) and remove the battery from phone for few minutes.
I have the original ROM 1.57.831.1 (47324) WWE from 04/08/09 and i tried one hard reset ("clear storage" from settings).
Does anyone know how to fix this ?
I'm verry disappointed. Now it does'nt charge even i remove the battery.
I think i'll try the warranty service.
No other suggestions ?
Are you sure it is the problem of the HTC HD? I got hte same problem. But because I charged my second battery which was newly bought from the official website HTC UK. My original battery works well. So I returned my second battery.
Try another battery.
ci6i said:
I'm verry disappointed. Now it does'nt charge even i remove the battery.
I think i'll try the warranty service.
No other suggestions ?
Click to expand...
Click to collapse
yep, same here...
my girlfriend and me, we own a HD, pretty much the same issue...
My device frist stated "unkown main battery status" and has been only willing to charge the battery while switched off and connected to PC (charger doesn't work).
My grilfriend's one now refuses to start at all.
One thing for sure - its not battery related since my fully recharged battery doesn't make her device starting.
I sometimes pulled out the battery without swichting the device off, or left it running for days before reseting it...i guess that might have triggered the problem...
gotta send it in, hopefully they don't mind my custom rom!
ci6i said:
My 2 months old Touch HD doesn't charge the battery anymore.
If i plug the power cord, the notification led turns red for 5-7 sec., then it turns off, and the battery meter shows no charging.
I can sync it with PC but runs again on battery, even the check box (under the power meter) is unchecked.
The only way to charge the battery, is to let the battery drains out (the phone turns itself off) and remove the battery from phone for few minutes.
I have the original ROM 1.57.831.1 (47324) WWE from 04/08/09 and i tried one hard reset ("clear storage" from settings).
Does anyone know how to fix this ?
Click to expand...
Click to collapse
I had this problem to.... Change of USB cable did the trick! So.....it's possible that your USB mini cable is dead. Try another USB if you haven't tried it yet.
Thank you all.
alper1 said:
I had this problem to.... Change of USB cable did the trick! So.....it's possible that your USB mini cable is dead. Try another USB if you haven't tried it yet.
Click to expand...
Click to collapse
I don't think it's the cable because i let the phone charging on my desk and suddenly, after few minutes (sometimes 1 min, sometimes 60 min) it stops charging (without touching/moving the cable),
ccieuser said:
...Try another battery
Click to expand...
Click to collapse
I'll try to find another battery but my friends use Nokia
4irm said:
...One thing for sure - its not battery related since my fully recharged battery doesn't make her device starting.
I sometimes pulled out the battery without swichting the device off, or left it running for days before reseting it
Click to expand...
Click to collapse
Well, in your case, for sure its not battery related.
After i left the battery out of the phone for 6 hours, it start charging again for 45 min then, the notification led start blinking red and green. After 2 minutes, the led turns off and i started the phone with 40% battery life.
It's driving me crazy and i don't know what to think!
I start to believe it's a battery problem but i'll ask for service opinion too, since i payed a lot of money for this.
Solved
My handset was repaired in service.
The problem was hardware related, generated by malfunction of switching power alimentation mechanism to motherboard.
Almost 8 out of 10 times I unplug the usb cord from my phone after connecting thru ActiveSync, my phone locks up on the screen it was on while connected to my computer. It shows "Connect to PC" at the top. The only way to have this fixed, is to take out the battery each time, or go to another phone and call my cell to have it leave that screen. Is there a process to disconnect with the USB? Are people going to the USB icon and right clicking "Safely Remove Hardware" when finished syncing their phone to avoid this? Thanks if you can share your experience.
If i got ur problem correctly, you can either tap on "Connect to PC" and see if that will encourage it to move on. Or when in doubt, always hit the Close button, hit it again and the unlock slider should appear wihch should solve the problem.
I have i5801 with android 2.1.
I had plugged in the phone to PC using the USB connector.
Had a power outage and pc got restarted.
Since then, something strange is happening on my phone. It keeps on displaying "USB Connected" on the top of screen, even when i have plugged out the phone from PC.
Not only this, i have restarted phoen multiple times and removed/inserted battery, it still keeps on showing USB connected at regular intervals (every 2 seconds) even though it is not connected , and phone switches off automatically!
Does anyone know the solution to this?
Try a factory reset and if it doesn't work try flashing another rom.
Sent from my GT-I5800 using XDA App
How to i factory reset this phone? I tried volup+voldown+home reboot, it displays a blue screen which shows Downloading, and nothing happens.
hey press "power button +volume up+volume down+home key"
all at once boot screen appear scroll down using volume down to factory reset and press home key phone resets.
or update to 2.2
dceite said:
How to i factory reset this phone? I tried volup+voldown+home reboot, it displays a blue screen which shows Downloading, and nothing happens.
Click to expand...
Click to collapse
Type *#*#7780#*#* in dialer.
Goto settings from there go to Privacy. There you will find a optiom Factory Data Reset. Good luck.
dceite said:
I have i5801 with android 2.1.
I had plugged in the phone to PC using the USB connector.
Had a power outage and pc got restarted.
Since then, something strange is happening on my phone. It keeps on displaying "USB Connected" on the top of screen, even when i have plugged out the phone from PC.
Not only this, i have restarted phoen multiple times and removed/inserted battery, it still keeps on showing USB connected at regular intervals (every 2 seconds) even though it is not connected , and phone switches off automatically!
Does anyone know the solution to this?
Click to expand...
Click to collapse
u have a big problem in hand
when u said that ur pc got restarted then it must have burnt the IC that controls the USB connection.
this IC is generally found attached. if it had burnt that u can recharge ur battery but u wnt be able to use any other PC connectivity functions.
sorry to say this but there is no way to fix this xcept giving it for servicing.
but bfore u give it u can dissemble it and have a look at the IC.
if it is burnt u will knw when u see it. no biggie
try this link to dissemble
http://www.cpkb.org/wiki/Samsung_GT-i5500_GT-i5500B_Galaxy_5_service_manual
hope this helps
I have a Galaxy GT-i9505 S4 and whenever the phone is fully charged, I plug out the micoUSB charger cable from the phone FIRST and then after the power charger adaptor from the power outlet. Thats the way to do it according to the user guide.
But, after doing all that after its charged, the phone's screen stays on and the Screen does not time itself out even though I set the display to time out after 30 seconds.
It does time out after 30 seconds whenever I tap something or do something on the screen, or nornally after doing tasks on the phone, it does do its normal time out after 30 seconds.
But I dont know why it did not time out after a full charge session.
Thanks.
I had a smiliar problem, the screen never shut off when connected to a power source. I think somehow the Android debug settings got transferred from my last phone.
These are not the exact words (I use Swedish) but it should get you where you need to go.
Go to Settings - More - About - click "Build nr" until you get a prompt saying Developer options activated - press Back - Developer options - Uncheck "Stay awake".
Hope that helps.
ZaInT_ said:
I had a smiliar problem, the screen never shut off when connected to a power source. I think somehow the Android debug settings got transferred from my last phone.
These are not the exact words (I use Swedish) but it should get you where you need to go.
Go to Settings - More - About - click "Build nr" until you get a prompt saying Developer options activated - press Back - Developer options - Uncheck "Stay awake".
Hope that helps.
Click to expand...
Click to collapse
Stay Awake was already UNCHECKED.
And just to understand here, the screen itself DOES shut off during charging, but the screen remains ON after unplugging it from the charger. And the only time the screen times out, is after when I press or do something on the screen. or after normal operating usage.
I just noticed that after I unplugged it from the charger, then I went to another room to do something and this was way longer than 30 seconds, and came back and the screen was still ON.
But, AFTER normal operating usage, the screen always times out after 30 seconds. So, thats OK. No issues there.
I had the problem with the no longer automatically / manually turn-off display and for me it was rename / delete the bootsamsung.qmp in system / media / the cause, soon to rename them or delete the display turns of not more itself off or even manually by button ...
is reproducible, but why no idea, when an idea who likes because nothing is even now what you would normally get in touch oO
I9505 with 4.2.2 (DBT MH5)