Hi every ones..
Is there any way to close the STK service?? (Sim tool kit)
Fábio Nóbrega said:
Hi every ones..
Is there any way to close the STK service?? (Sim tool kit)
Click to expand...
Click to collapse
Just delete the STK_Service from regestry to get rid:
HKLM\Services\Stk_service
Fábio Nóbrega said:
Hi every ones..
Is there any way to close the STK service?? (Sim tool kit)
Click to expand...
Click to collapse
Hi
May I ask what is the benefit for this?
tito12 said:
Hi
May I ask what is the benefit for this?
Click to expand...
Click to collapse
To use value added services provided by network service providers and to get alerts for latest offers, quiz and contests...
I think so.
Thanks premsoni4u
In this case there's no problem to delete it
my question is totally different, how to enable this service again? I installed on my elfin a ROM that does not have this service enabled, and I use it a lot ...
greetings
att.Felix_TheDaRk
Related
Hi All,
I would like to supply XDA's to a client, who plans on using them
for GPRS only. They do not want their workers to have the ability
to use them as Phones. Is there any way of removing the Phone
Dialer App (from ROM or otherwise), so that they couldn't key in
a phone number?
The only option I can think of is Kiosk mode with that SP Kiosk
App?
cube said:
Hi All,
I would like to supply XDA's to a client, who plans on using them
for GPRS only. They do not want their workers to have the ability
to use them as Phones. Is there any way of removing the Phone
Dialer App (from ROM or otherwise), so that they couldn't key in
a phone number?
The only option I can think of is Kiosk mode with that SP Kiosk
App?
Click to expand...
Click to collapse
On any SIM you can block selected outgoing calls.... Check on the options your phonecompany gives you.
Maybe you could lock the SIM to only allow dialing out to phonenr. stored on the SIMcard itself (being zero, for example )
Thanks the reply,
I'd rather remove the ability to phone because I would rather
the end user didn't even know it was a phone. The SIM Lock
option isn't a bad idea, but they could stick other SIM cards in
it, which our customer does not want.
cube said:
Thanks the reply,
I'd rather remove the ability to phone because I would rather
the end user didn't even know it was a phone. The SIM Lock
option isn't a bad idea, but they could stick other SIM cards in
it, which our customer does not want.
Click to expand...
Click to collapse
Not with a sim-lock and even then, they are calling at their own cost...
If you block it on the XDA, it can be hacked on the XDA, make it SIM-Dependant... A hardreset wil alway restore the phoneapplication. Only way would be to create a own rom without phoneoptions.
And still they wil be able to hack it, by installing phonesoftware, or installing their own ROM... Read this forum :mrgreen:
Again : If you block it on the XDA, it can be hacked on the XDA...
cube said:
Thanks the reply,
I'd rather remove the ability to phone because I would rather
the end user didn't even know it was a phone. .........
Click to expand...
Click to collapse
I thought that, if a guy is smarter enough to know how to use it and to know its has GPRS, then he would know it is a phone.
cube said:
I would like to supply XDA's to a client, who plans on using them for GPRS only. They do not want their workers to have the ability
to use them as Phones. Is there any way of removing the Phone
Dialer App (from ROM or otherwise), so that they couldn't key in
a phone number?
Click to expand...
Click to collapse
You can edit ROM and remove cprog.exe application. Just use any hex editor to change its name to something like "lalala.la". But a clever user would take this file from another ROM and install to their device. Or would reflash the device.
cube said:
I would rather the end user didn't even know it was a phone.
Click to expand...
Click to collapse
Bit difficult - the start call and end call buttons will be a bit of a give-away!
I agree with the others that a modified ROM is probably the easiest/cheapest way - simply remove the phone app and even a hard-reset won't restore it but this won't stop the bright user from mod'ing the ROM himself.
Howdy folks,
I used to use WiViT SIM Status Switcher with my Magician, which worked well.
I would like a similar application for WM5. (WiViT SSS will not install on my Wizard)
Does anyone know of such an app that will work with WM5?
try this
it is a slight variaTION AND works with WM5 devices. i use it on the EXEC.
great stuff thanks ! i'll give it a shot
SSS does install now, thanks. But how about the license. The code you were given wont work on a different device. . . .
Just had contact with one of the Wivit developers.
A WM5 version is planned.
Just give these guys some more time.
I installed the download link on my mda II, but I can not start the application, does anyone has a function version / software for switching in WM5?
Does anyone know where I can buy a dual sim adapter for the Wizard (XDA Mini S) please? I don't want one where you have to cut up the SIM.
Thanks in advance.
max999 said:
I installed the download link on my mda II, but I can not start the application, does anyone has a function version / software for switching in WM5?
Click to expand...
Click to collapse
It's a today item which has to be enabled from within settings
Next version STK compatible?
Hi,
I use a dual sim solution where you have to cut your sims.
This worked fine, and the new dual card seemed to work.
It even made a new entry in my program group called "Hypercard"
I didn't had time to fully check it out, but that program is gone after shut down the device or do a soft reset..
Any way to get it back?
I also tried Wivit Sim Status Switcher, but only the cab i found here (Sim Switcher.cab) worked, although i had to manually edit the registry to reflect my Dutch ROM. (Program Files to Programmabestanden)
It would be great if someone could create a Dutch cab or could tell me how to edit..
It doesn't seem to switch the SIM's though.. Possibly because i run WM5 or because the adapter uses STK? (Sometimes it just dissapears from Today/Vandaag screen..)
I really hope Wivit's next version is STK, WM5 compatible. (and multilangual?)
Thanks,
allegro16
This version of the sim-switcher works great with my mai-12 dual sim.
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
birdibird said:
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
Click to expand...
Click to collapse
Me too
cizake said:
birdibird said:
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
Click to expand...
Click to collapse
Me too
Click to expand...
Click to collapse
Hmm, I found out how to get it back:
Disable in your settings / today / items the Sim Status Switcher
exit the settings screens until you're back in the today screen.
Enable the Sim Status Switcher again in your settings, and voila: There is your operator again.
:shock: ???
talkingbollox said:
Does anyone know where I can buy a dual sim adapter for the Wizard (XDA Mini S) please? I don't want one where you have to cut up the SIM.
Thanks in advance.
Click to expand...
Click to collapse
Use the search function. Theres a topic on nocut dual sim adapters.
I added a how-to to that thread
l6cum said:
try this
it is a slight variaTION AND works with WM5 devices. i use it on the EXEC.
Click to expand...
Click to collapse
Sorry, didn't find a link. Try what?
arg0 said:
l6cum said:
try this
it is a slight variaTION AND works with WM5 devices. i use it on the EXEC.
Click to expand...
Click to collapse
Sorry, didn't find a link. Try what?
Click to expand...
Click to collapse
Sorry again, never mind. I had not logged in and the link was not visible
Guys,
I've updated VJVolubilis to control the phone radio. I've put in a function to toggle the radio on and off, so for me, launching it twice will switch my dual sim. It should work on WM5, but I've only tested it on the emulator. Could I ask if anyone gets a chance, just to give it a quick go?
http://forum.xda-developers.com/viewtopic.php?p=256445#256445
Gracias!
V
birdibird said:
cizake said:
birdibird said:
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
Click to expand...
Click to collapse
Me too
Click to expand...
Click to collapse
Hmm, I found out how to get it back:
Disable in your settings / today / items the Sim Status Switcher
exit the settings screens until you're back in the today screen.
Enable the Sim Status Switcher again in your settings, and voila: There is your operator again.
:shock: ???
Click to expand...
Click to collapse
I cant get rid of the 'registering' . . . .
Like mentioned earlier in the topic:
Just disable/enable the plugin in the Today screen settings, it should work ok then.
I still hope the soon start replying to their mail..
They asked me to beta test and translate to Dutch, so i send them a Dutch copy of SSS, but haven't heard from them yet..
Allegro.
edsub said:
I cant get rid of the 'registering' . . . .
Click to expand...
Click to collapse
Irritated the hell out of me.
The Languange file is just a text file, choose you language and just edit the text. I replaced it with ablank space
B.t.w. I still can't use it to switch SIMS, I need to go to the STK, switch and then turn the GSM function off and back on again. Anyone knows witch DUAL sim adapter handles V1 and V2 sims and can be used with WiViT's switcher?
Thanks, cheers,
cacti
le_cactus: have you tried VJVolubilis? I use a dual sim that uses fight mode to switch. VJVolubilis hopefully works on WM5 and Wm2003 to switch sims this way.
V
MemMaid found 44 dupes in the Notification Que they were all sddaemon.exe. Is it ok to remove the dupes? What does sddaemon do?
i think MemMaid deleted all my emails =/ or maybe its another problem with the wizard
There is a bug in Windows Mobile 5 that causes duplicate notifications... I believe I read that here somewhere... not sure what it does but deleting the dupes has never caused me an issue. I use MemMaid at startup to clean up when my device boots. I make a habit of restarting the phone once a day and it runs great.
syalam said:
What does sddaemon do?
Click to expand...
Click to collapse
It's the background process for voice dial.
It's not just safe to delete the duplicates (just the duplicates,nothing else!) but also adviseable. If you have lots of them they can slow down your device.
dupes
is there a way to prevent dupes from occuring or is that just a bug?
Re: dupes
syalam said:
is there a way to prevent dupes from occuring or is that just a bug?
Click to expand...
Click to collapse
What rom are you using? my dupes of sddaemon went when i upgraded to aku2 rom.
my ROM Is the basic cingular one...1.8.11.1, this is off topic but does this ROM include A2DP?
syalam said:
my ROM Is the basic cingular one...1.8.11.1, this is off topic but does this ROM include A2DP?
Click to expand...
Click to collapse
I think you need ROM 2.x for that.
one quick question aboiut memmaid
on wm5, is there supposed to be softkeys support (so you don't have to tap the screen)?
JwY said:
one quick question aboiut memmaid
on wm5, is there supposed to be softkeys support (so you don't have to tap the screen)?
Click to expand...
Click to collapse
Don't think it's supported...
bolasz said:
syalam said:
What does sddaemon do?
Click to expand...
Click to collapse
It's the background process for voice dial.
It's not just safe to delete the duplicates (just the duplicates,nothing else!) but also adviseable. If you have lots of them they can slow down your device.
Click to expand...
Click to collapse
Yeah. Comfirmed that. As a matter of fact, i removed sddaemon from my start up list to avoid it duppping itself on my notification list again. I never use the voice dial anyway. Recommend those who does use voice dial to do the same.
bolasz said:
JwY said:
one quick question aboiut memmaid
on wm5, is there supposed to be softkeys support (so you don't have to tap the screen)?
Click to expand...
Click to collapse
Don't think it's supported...
Click to expand...
Click to collapse
thanks for the quick reply
guys are you guys using a legit version of memaid? i noticed they only have a trial...
anyway around that?
Hi,
Is there any way to close the STK service?? (Sim tool kit)
I have noticed before that it isn't possible to close it after you have opened it. (Even with Magic button)
But now I do use it for my new dual sim adapter. The reason I want to turn it of is that it uses an increadible amount of power!
Teh strange thing is that it only uses so much power after I have started the STK service!! So I was wondering if I could just switch sims thru STK and than close it.
Maybe there is an alternative program?
Thanks for your help and/or opinions!
millerm said:
Hi,
Is there any way to close the STK service?? (Sim tool kit)
I have noticed before that it isn't possible to close it after you have opened it. (Even with Magic button)
But now I do use it for my new dual sim adapter. The reason I want to turn it of is that it uses an increadible amount of power!
Teh strange thing is that it only uses so much power after I have started the STK service!! So I was wondering if I could just switch sims thru STK and than close it.
Maybe there is an alternative program?
Thanks for your help and/or opinions!
Click to expand...
Click to collapse
download task manager v2.1
from this site
u can desable the service with it or make it start manualy.
and thank you very much ......u just solved the problem that i been having with faria 3.2 beta4 rom.
thanks
faria said:
and thank you very much ......u just solved the problem that i been having with faria 3.2 beta4 rom.
thanks
Click to expand...
Click to collapse
Thanks for your reply.. I'm checking it out now.
But how did I help you?
millerm said:
Thanks for your reply.. I'm checking it out now.
But how did I help you?
Click to expand...
Click to collapse
i been having severe power drainage .so i thought it was somenting in my beta rom.when i read your post i realize that it started when i put the dual sim card adapter.
batery would drain 30% in 9 hours!!! with nothing installed.
thanks again
Doh..! I have the exact same problem.. Anyway I'm glad for your ROM you found out!
Hmm I just ran the task manager.. But it doesn't help!
"Service stop error"
'The service cannot accept control messages at this time'
Now put it at manual startup to see if that will give me control..
Hi Guys!
I'd like to develop a program, which activates the device lock of wm6 (wm5) on demand - with my special settings - or to activate a special programm on pda-startup (incl activesync lock)
does anybody know, how to achieve this?
best,
chris
TomCatXY said:
Hi Guys!
I'd like to develop a program, which activates the device lock of wm6 (wm5) on demand - with my special settings - or to activate a special programm on pda-startup (incl activesync lock)
does anybody know, how to achieve this?
best,
chris
Click to expand...
Click to collapse
there's a API called SHSetDeviceLock or something.
I have a working program, if that helps ...
http://www.zenyee.com/2008/10/16/pin-lock-your-device/
thanks for your reply!
i'd need the api to include it into an existing program. do you by chance have it or remember the exact name?
thx,
tc
TomCatXY said:
thanks for your reply!
i'd need the api to include it into an existing program. do you by chance have it or remember the exact name?
thx,
tc
Click to expand...
Click to collapse
SHDeviceLockAndPrompt( ) is the one.