Hi,
Is there any way to close the STK service?? (Sim tool kit)
I have noticed before that it isn't possible to close it after you have opened it. (Even with Magic button)
But now I do use it for my new dual sim adapter. The reason I want to turn it of is that it uses an increadible amount of power!
Teh strange thing is that it only uses so much power after I have started the STK service!! So I was wondering if I could just switch sims thru STK and than close it.
Maybe there is an alternative program?
Thanks for your help and/or opinions!
millerm said:
Hi,
Is there any way to close the STK service?? (Sim tool kit)
I have noticed before that it isn't possible to close it after you have opened it. (Even with Magic button)
But now I do use it for my new dual sim adapter. The reason I want to turn it of is that it uses an increadible amount of power!
Teh strange thing is that it only uses so much power after I have started the STK service!! So I was wondering if I could just switch sims thru STK and than close it.
Maybe there is an alternative program?
Thanks for your help and/or opinions!
Click to expand...
Click to collapse
download task manager v2.1
from this site
u can desable the service with it or make it start manualy.
and thank you very much ......u just solved the problem that i been having with faria 3.2 beta4 rom.
thanks
faria said:
and thank you very much ......u just solved the problem that i been having with faria 3.2 beta4 rom.
thanks
Click to expand...
Click to collapse
Thanks for your reply.. I'm checking it out now.
But how did I help you?
millerm said:
Thanks for your reply.. I'm checking it out now.
But how did I help you?
Click to expand...
Click to collapse
i been having severe power drainage .so i thought it was somenting in my beta rom.when i read your post i realize that it started when i put the dual sim card adapter.
batery would drain 30% in 9 hours!!! with nothing installed.
thanks again
Doh..! I have the exact same problem.. Anyway I'm glad for your ROM you found out!
Hmm I just ran the task manager.. But it doesn't help!
"Service stop error"
'The service cannot accept control messages at this time'
Now put it at manual startup to see if that will give me control..
Related
Hi guys,
Since almost 350 Magician fellows have downloaded my application, I dare informing you all that I have released an updated version.
Come over my site and download it:
http://www.winmobileapps.com
See you there.
Bye.
slvrbllt said:
Hi guys,
Since almost 350 Magician fellows have downloaded my application, I dare informing you all that I have released an updated version.
Come over my site and download it:
http://www.winmobileapps.com
See you there.
Bye.
Click to expand...
Click to collapse
Hi slvrbllt,
Just been to your site. Many thanks for the cycle bluetooth app, just what I was looking for.
I tried your Phone Profiles app and its good but unfortunately conflicts with my Qtek firmwares flight mode - it's a long story.
Anyway I'm trying to remove the app but finding it a little difficult. It keeps saying that /windows/profiler.dll is open or read only even after a soft reset. Any ideas how I can remove the app? It suggests doing a stop all but no apps are listed there.
Thank you,
hi slvrbllt!! Can we assign only a vibration for the new SMS without ringing (for a silent profile for example with a vibration for the ring)? Thanks for this great update!bye
borgs said:
Just been to your site. Many thanks for the cycle bluetooth app, just what I was looking for.
I tried your Phone Profiles app and its good but unfortunately conflicts with my Qtek firmwares flight mode - it's a long story.
Click to expand...
Click to collapse
Have you tried DKToday? It's a great BT cycler & more.
@slvrbllt,
Very nice app. you can expect Dutch translations soon. Only thing I like as an improvement is small buttons to quick pick a profile or a possibility to put it in the tray.
Cheers, M
Hmm, looks Good...
borgs said:
slvrbllt said:
Hi guys,
Since almost 350 Magician fellows have downloaded my application, I dare informing you all that I have released an updated version.
Come over my site and download it:
http://www.winmobileapps.com
See you there.
Bye.
Click to expand...
Click to collapse
Hi slvrbllt,
Just been to your site. Many thanks for the cycle bluetooth app, just what I was looking for.
I tried your Phone Profiles app and its good but unfortunately conflicts with my Qtek firmwares flight mode - it's a long story.
Anyway I'm trying to remove the app but finding it a little difficult. It keeps saying that /windows/profiler.dll is open or read only even after a soft reset. Any ideas how I can remove the app? It suggests doing a stop all but no apps are listed there.
Thank you,
Click to expand...
Click to collapse
Try to uncheck Phone Profiles on Today Items before uninstall.
It works for me.
Regards,
Arto.
looks great, but there is a problem with my magician. it crashed when I try to run it, i just saw a window appearing and immideately disappearing .... (my system is runing windows mobile 2003 simplified chinese edition)
Artosoft said:
Try to uncheck Phone Profiles on Today Items before uninstall.
It works for me.
Regards,
Arto.
Click to expand...
Click to collapse
Cheers Arto, that's exactly what I was forgetting to do.
Thanks.
oltp said:
Have you tried DKToday? It's a great BT cycler & more.
Click to expand...
Click to collapse
Thanks, I gave it a try but it has problems with flightmode also (note. these problems seem to be due to a particular Qtek firmware). I think I'll stick with radiooff and CicleBT. Thanks for the info though.
I've downloaded and installed the software, it look good !!
But when I get an incomming call the callerid popup appears followed by a short beep, not the ringtone I setup in the profile... What am I doing wrong ??
Regards,
Dennis :?
I installed it on my Dopod 818 Pro and it was working fine. However I noticed that the ringtone I assign for any profile is disregarded! It always plays the default ringtone.
So I had to remove it
[Posted to wrong thread]
I can't even install it... I just have this cab(?) file called Winmobileapps_PhoneProfiles.zip but what do I do with it? If I unzip it to my home pc, three files come out from it but none of them is an installation file (.exe)
-John
Try this link http://www.modaco.com/index.php?act=Attach&type=post&id=15580 then
Yeah, but the specific thing here is; Where do I put the CAB file on my device - which directory??? As you can see I don't know ANYTHING about Win CE
-John
Hi John,
you'll get used to it. I suggest you put the .cab on your SD-card, either via Act.Sync, a card reader or direct download with Pocket Internet Explorer (PIE). Then click it from within File Explorer to install. I've installed it to my storage folder (not the default location) & it runs well.
Another suggestion: get caninstl (google for it), then you can choose where to install cab-files far more easily & it got an option not to delete the cab after finishing the installation.
Regards, M
Nice work slvrbllt, everything that was missing in your first post in now in it. You made me happy hehe
V1.2.0 is out!
Question for Silver Bullet: I saw there is a new feature: Hi-Res icons added.
What is exactly the feature is (I haven't install v1.2.0 yet)?
Thanks!
Regards,
Arto.
@artosoft
Hi-res Icons are for VGA devices only... ;-)
Thanks for your appreciations.
is it possible to set a vibration to an incoming SMS without a ringtone?thanks
Hi slvrbllt, i have tried your other app Flightmode on my BA WM5 and it works great. I have a question on Phone Profiles; would it be possible to add control over the backlight and power save options? This would be helpful to create a profile for "Car" for instance where i need the backlight on and power save disabled for my GPS and would be easier to setup a profile to do this.
Thanks for your applications and hard work.
Howdy folks,
I used to use WiViT SIM Status Switcher with my Magician, which worked well.
I would like a similar application for WM5. (WiViT SSS will not install on my Wizard)
Does anyone know of such an app that will work with WM5?
try this
it is a slight variaTION AND works with WM5 devices. i use it on the EXEC.
great stuff thanks ! i'll give it a shot
SSS does install now, thanks. But how about the license. The code you were given wont work on a different device. . . .
Just had contact with one of the Wivit developers.
A WM5 version is planned.
Just give these guys some more time.
I installed the download link on my mda II, but I can not start the application, does anyone has a function version / software for switching in WM5?
Does anyone know where I can buy a dual sim adapter for the Wizard (XDA Mini S) please? I don't want one where you have to cut up the SIM.
Thanks in advance.
max999 said:
I installed the download link on my mda II, but I can not start the application, does anyone has a function version / software for switching in WM5?
Click to expand...
Click to collapse
It's a today item which has to be enabled from within settings
Next version STK compatible?
Hi,
I use a dual sim solution where you have to cut your sims.
This worked fine, and the new dual card seemed to work.
It even made a new entry in my program group called "Hypercard"
I didn't had time to fully check it out, but that program is gone after shut down the device or do a soft reset..
Any way to get it back?
I also tried Wivit Sim Status Switcher, but only the cab i found here (Sim Switcher.cab) worked, although i had to manually edit the registry to reflect my Dutch ROM. (Program Files to Programmabestanden)
It would be great if someone could create a Dutch cab or could tell me how to edit..
It doesn't seem to switch the SIM's though.. Possibly because i run WM5 or because the adapter uses STK? (Sometimes it just dissapears from Today/Vandaag screen..)
I really hope Wivit's next version is STK, WM5 compatible. (and multilangual?)
Thanks,
allegro16
This version of the sim-switcher works great with my mai-12 dual sim.
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
birdibird said:
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
Click to expand...
Click to collapse
Me too
cizake said:
birdibird said:
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
Click to expand...
Click to collapse
Me too
Click to expand...
Click to collapse
Hmm, I found out how to get it back:
Disable in your settings / today / items the Sim Status Switcher
exit the settings screens until you're back in the today screen.
Enable the Sim Status Switcher again in your settings, and voila: There is your operator again.
:shock: ???
talkingbollox said:
Does anyone know where I can buy a dual sim adapter for the Wizard (XDA Mini S) please? I don't want one where you have to cut up the SIM.
Thanks in advance.
Click to expand...
Click to collapse
Use the search function. Theres a topic on nocut dual sim adapters.
I added a how-to to that thread
l6cum said:
try this
it is a slight variaTION AND works with WM5 devices. i use it on the EXEC.
Click to expand...
Click to collapse
Sorry, didn't find a link. Try what?
arg0 said:
l6cum said:
try this
it is a slight variaTION AND works with WM5 devices. i use it on the EXEC.
Click to expand...
Click to collapse
Sorry, didn't find a link. Try what?
Click to expand...
Click to collapse
Sorry again, never mind. I had not logged in and the link was not visible
Guys,
I've updated VJVolubilis to control the phone radio. I've put in a function to toggle the radio on and off, so for me, launching it twice will switch my dual sim. It should work on WM5, but I've only tested it on the emulator. Could I ask if anyone gets a chance, just to give it a quick go?
http://forum.xda-developers.com/viewtopic.php?p=256445#256445
Gracias!
V
birdibird said:
cizake said:
birdibird said:
One glitch though: after switching, the operator is not shown anymore. The software only says Registering...
Click to expand...
Click to collapse
Me too
Click to expand...
Click to collapse
Hmm, I found out how to get it back:
Disable in your settings / today / items the Sim Status Switcher
exit the settings screens until you're back in the today screen.
Enable the Sim Status Switcher again in your settings, and voila: There is your operator again.
:shock: ???
Click to expand...
Click to collapse
I cant get rid of the 'registering' . . . .
Like mentioned earlier in the topic:
Just disable/enable the plugin in the Today screen settings, it should work ok then.
I still hope the soon start replying to their mail..
They asked me to beta test and translate to Dutch, so i send them a Dutch copy of SSS, but haven't heard from them yet..
Allegro.
edsub said:
I cant get rid of the 'registering' . . . .
Click to expand...
Click to collapse
Irritated the hell out of me.
The Languange file is just a text file, choose you language and just edit the text. I replaced it with ablank space
B.t.w. I still can't use it to switch SIMS, I need to go to the STK, switch and then turn the GSM function off and back on again. Anyone knows witch DUAL sim adapter handles V1 and V2 sims and can be used with WiViT's switcher?
Thanks, cheers,
cacti
le_cactus: have you tried VJVolubilis? I use a dual sim that uses fight mode to switch. VJVolubilis hopefully works on WM5 and Wm2003 to switch sims this way.
V
Usually I only need Agile messenger running as far as my need for data services goes. I find GPRS to be just fine for this but my device always connects to UMTS which kills my battery.
Is there a program out there that will allow me to easily switch between the data services? I thought I remembered seeing something like this but have searched to no avail.
Yeah, I also saw this kind of app that allows you to switch it right from the today screen, but don`t know actually where I saw it..
I am also looking for this app..
Marlz said:
Usually I only need Agile messenger running as far as my need for data services goes. I find GPRS to be just fine for this but my device always connects to UMTS which kills my battery.
Is there a program out there that will allow me to easily switch between the data services? I thought I remembered seeing something like this but have searched to no avail.
Click to expand...
Click to collapse
Comon guys, it's 2 threads down (at least today)
http://forum.xda-developers.com/showthread.php?t=286844
Oh.. lol.. didn`t saw that one.. sorry..
Just a quick OT question..
Which screenshot application does they using in that thread you gave us.. The one that gives you whole device picture, not just screen picture.. Thnx!
Ahh thanks. Guess I'm not so clear on the acronyms. That thread says WCDMA and GSM. Didn't realize that it the same as we are asking about.
Thanks.
Shamanix said:
Oh.. lol.. didn`t saw that one.. sorry..
Just a quick OT question..
Which screenshot application does they using in that thread you gave us.. The one that gives you whole device picture, not just screen picture.. Thnx!
Click to expand...
Click to collapse
I use SOTI pocket controller, it shows an exact replica of your tytn screen displayed (via Activesync) on your PC screen. I can do a copy and paste with that.
Thank you very much.. I will give it a try..
Hi there,
are there any devices/programs that can show all visible cell-id, not only thw one currently connected?
If you know let me know.
saulius
[email protected]
phonealarm pro can do this. once you montior the cell, you can link profiles to it and make it set your device config as you like when you come home or at your work, etc. very useful!
try type *#*#364#*#* in phone application
blondak said:
try type *#*#364#*#* in phone application
Click to expand...
Click to collapse
does not work for me
hi there,
jep thanks ...364.... works for me. is there any program that worked with cell1-cell6 info?
excellent tip. Thanks
CellProfileSwitcher can log any cell's it encounters and also near by ones. It can do more than just profile switching.
http://maniac.fschreiner.de/
h4waii said:
CellProfileSwitcher can log any cell's it encounters and also near by ones. It can do more than just profile switching.
http://maniac.fschreiner.de/
Click to expand...
Click to collapse
@h4waii
I have installed this software on HTC Universal but the prog doesnt recognise any cell. Is this device hardware limitation or I need to find proper version?
cellprofileswitcher
yes, i tried this one too...
you can check the forum and will notice that tytn gsm module is some kind different so it doesn't work.
For this reason all ideas are welcome.
I'm interested would it be posible to store data to a file, if the data is seen at the screen, suppose we enter some code (like get imie), or run program and the required information is showen on the screen...
getting info
Maybe someone could share how to get info such like cellprofileswitch returns?
Since i need to combine more information at the same time and know that cps won't manage to do it...
Yes !!!
Work in my Cruise !
Tanks Blondak
Hi every ones..
Is there any way to close the STK service?? (Sim tool kit)
Fábio Nóbrega said:
Hi every ones..
Is there any way to close the STK service?? (Sim tool kit)
Click to expand...
Click to collapse
Just delete the STK_Service from regestry to get rid:
HKLM\Services\Stk_service
Fábio Nóbrega said:
Hi every ones..
Is there any way to close the STK service?? (Sim tool kit)
Click to expand...
Click to collapse
Hi
May I ask what is the benefit for this?
tito12 said:
Hi
May I ask what is the benefit for this?
Click to expand...
Click to collapse
To use value added services provided by network service providers and to get alerts for latest offers, quiz and contests...
I think so.
Thanks premsoni4u
In this case there's no problem to delete it
my question is totally different, how to enable this service again? I installed on my elfin a ROM that does not have this service enabled, and I use it a lot ...
greetings
att.Felix_TheDaRk