Database Users

Stuck in Bootloader

Hello,
i tried to update my BA with wm6.
after flashing it stuck in bootloader(blue,green,red,white display) with the line "R 1.10.00" and nothing more...
even hard or softreset do nothing.
what can i do?

ok i even try the Stuck at startup method.
that's the output of Multiport TTY Version:
set 14 0
HTCST ÚÈÒHTCEUSB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>task 0
it always stuck in blue,green,red,white screen after run multiport tool. what can i do?
------------
i have this problem because of this flashing method:
i entered the grey screen (with serial/usb in first line). then i put my usb connection on and run the rom_update. after it is finished (succesfully) it stuck in the blue, green, red, yello screen! help please...

how did you hard reset?

hello,
i hold down the power-button and at same time put stylis in reset.

hard reset for both WM5 and WM6 is different from the one you're doing. here's the guide...
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
good luck!

ok thanks, i have tried this:
i do softreset. whenn the stripes came i push "records and "camera"(media player button because there is no camera)---> nothing happens. it stops with the line R 1.10.00 and the coloured stripes.
i dont knwo what to do.
the bootloader method is running. i hold power and record button while i softreset. but with color screen it wont work.
they is no camera button (it is media-player button) because there is no camera. its an german xda III (blue angel).
the next problem is i dont knwo what os is right now on it. befor flashing it was wm2003 and flashing says it was successfully. i dont know if its wm6 or wm2003!

ok now all is happen...
the xda says nothing. it dont go on, it dont work anymore. no lights when in cradle, nothing.
can i do anything?

1. Take the battery out, wait a moment, put it back, do not turn on. Put in the cradle and try to charge it. Use power connection (from power supply), disconnect USB from the computer for charging. Amber led should turn on.
2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.
What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.

jakubd said:
What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.
Click to expand...
Click to collapse
it was not unlocked befor i flashed with bootloader-method.
i charged the battery in cradle (withoud the blue-angel). the led first went orange, after a while turned green (fully loaded). put it back in BA an nothing happens. then put BA (with battery) in cradle and the led became red.
no action on devide, no feedback, nothing. it wont turn on but led is still working.!?

jakubd said:
2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.
Click to expand...
Click to collapse
ok i get it. in display is the "USB" & "v2.07". now i can flash. but my problem is the phone is not unlocked yet. what file can i flash now??

This message tells you are in bootloader mode. Now you can perform normal flash - I would propose you to use tested&working rom (WM2003?). If this works fine, try again to upgrade to WM5/WM6.
BTW: if you disconnect USB (take out BA from cradle) it should show Serial instead of USB.

ok big tanks to the forum. i finally get it. wm6 german on blue-angel!

Same thing here... but worst..
My 9090 is stuck at bootlader...
When i try to update, (i press the power, record and reset), it says:
SERIAL (or USB)
DOC VERSION IS ERROR!
v2.08
Any idea???

that's normal...
try to flash/update your BA in that screen.

the easy way to go into bootloader mode is to execute a file called Enter Bootloader.exe ..it comes with the rom u download..( well it came with xplodes )
Note:- you have to execute this file directly on your deive not on your desktop PC...and i have only tested this on WM 2003..maybe it will work with wm6 also

SilverSamurai said:
that's normal...
try to flash/update your BA in that screen.
Click to expand...
Click to collapse
I there...
I just updated to BA_TMNL_14200_119_11300_Ship, but only with Maupgrade, couldnt do it with baupgrade...
The problem is that i cant put extended rom, whem i try to upgrade is allways an error... and in the settings i dont have extended rom instaled...
Besides that the batery only last 1hour and the PDA is always freezing... i'm always doing resets...
any idea??
Sorry for my bad english by the way...

Error 260 Help!

Hi, my m600 does not pass bootloader, i can hard reset/soft reset, wm5 has come on once, then went to align screen but had trouble everytime, but at least it was being recognised by active sync to load No Vendor Rom. ( i tried bootmode/then run RUU, with no luck) it either says error 260 no device detected (but its in task bar as removable drive.) or when it was working for them few minutes it it would run No Vendor setup great and recognise (as active sync is working at this point) but doesnt go past 0% and then the error comes up "error 606" and then offers the recovery process. also a little note to add: the first screen when turned on, sometimes the gsm 2.x.x.x is missing?? from the top left corner.
any help would be appreciated.

bootloader Don't Connect

Hi everybody,i have some problem's with my cingular 8125.I have posted another thread,but no one answered,so i post a little different thread with different question.
My phone won't startup and when i enter to bootloader screen it don't connect's to pc.
It's started when i installed newest windows of CR96,i installed it,and next morning i found my device off and when i turn it on it don't even goes to main screen with ipl spl gsm and os info.It's just show's htc logo till it discharges.
I tried connecting it to pc,but when i enter to bootloader screen it don't connects,it even don't charge the phone when it's power off and connected to pc with usb.
PLEASE HELP ME fix this problem

tried turning it on in bootloader mode? and hard reset?

I just hard reset with tutorial i find on net.Well after hard reset it quickly showed me the ipl spl info on the same logo (it was really quickly),but now it's still the same/
Sometimes when i connect it to pc when ppc is off,the red light start blinking,is this should say something?

can somebody help me?

How to fix an HD2 that Freezes at the splash screen and won't boot

HI,
I just had this problem and I saw that a ton of others had it too. It was where my phone would stop at the windows screen and not boot, and my PC wouldn't read the phone so I couldn't load a new rom or Hard SPL. How I fixed it was by getting my phone into bootloader mode, (the multi colored screen). Here's how to do it.
While phone is Off:
Hold Volume down & press power button
While phone is On
Hold Volume down & press Reset Button (meaning the little yellow button by the battery that you have to press with a pen to soft reset it)
Once your on the bootloader screen, plug your phone into your PC, you will hear the ding that the computer recognized it but your Windows Mobile desktop software will still say your not connected, don't worry about that,, you are connected. After that, just pick whatever rom you want, then just install it like normal. and it works. If your not running a rom, do the same but install hard SPL instead of a ROM.
I hope this helps,
As long as your phone turns on at least to the opening screen there is hope.
kn0t.

i had that problem, my phone was stuck on stock together splash screen, but I just called up tmo and they have sent me a new hd2.

Three words. I LOVE YOU! well not really since I'm not gay ha!
By the way This also works for the HTC Imagio!

can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?

waigstar said:
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
Click to expand...
Click to collapse
Ok first off what ROM do you have and what SPL does it show when you are in the muticolor bootloader screen? Secound if you are trying to flash a ROM yse right clicking the .exe file and selecting run as adminastrator is a good idea. l

I had the same problem.. what usually helps for me is when it gets stuck.. pull out the battery and give it a solid 15-20 minutes.. and then turn it on and do nothing up until after it has booted

i do the battery thing but i cant go on doing this , i put a little txt or phone call and the phone goes bonkers and heats up,nightmare!
ok on the tri colour screen it says
PBB110 HX-BC
SPL-S.08.0000 8G XE
MICRO(LED) 0X05
MICROP(TOUCH)
SERIAL
AH!! just got into the boatloader screen !! by pressing volume up and down together~! rest it! but i need to wait cos ive pulled the battery again!!!

I am having the same issue. I had a android rom then was finally able to flash via sd the stock rom, but it would just freeze on splash screen when trying to boot. Now when I try to flash rom again it will start and freeze on 1%. Any suggestions?

Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol

stormohio said:
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
Click to expand...
Click to collapse
Ok try going to windowsmobile.com/getstarted and download and install the latest version of ActiveSync or Windows Mobile Device Center (WMDC) , wich ever one you have to have for your computer, and install it on your computer as they have updated USB drivers for your HD2.

have you tried loading a rom from the root of your memory card LEOimg.nbh?

i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken

melodicstealer said:
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
Click to expand...
Click to collapse
You need to put your phone into bootloader then your computer will recognize it. Hold the volume down button down while you power on the phone and the multicolor bootloader will come up. Next connect your HD2 to your computer via your USB cable. Wait for the Serial in the white bar of bootloader changes to USB and then flash. If you go to the device manager of your computer while you see USB on your phone it should say HTC USB Sync if you want to be assured that you have a connection to flash with.

[Q] The only thing that's working: bootloader

Hello together
wish you nice eavening!
My Problem is the following: The only thing, on my htc touch hd T8282 that seems to work, is the bootloader.
Til five minutes ago I could read there:
BLAC 100 32M
SPL-1.54.0000
MicroP - BlackStone (LED) v6
now the following is added:
in the right, top corner: RUUNBH
in the green field: Upgrade ROM code error, Please try again
I think, this is because, in my helplessness, I interrupted the flashing process. But that's not the main problem.
Beside that, I can "start" the phone only by plugging in the USB cable from Computer or charging station. Then the phone vibrates, and the "smart mobility" screen comes up. After about 5 seconds it starts again, doing the same.
I tried hard resets, but it doesn't work. The only reason why I'm still trying to repair the phone is, that the bootloader is working. To me a signal, that somhow not everything is lost, but maybe I'm wrong.
I tried to flash the phone too. I tried first with the official "BlackStone_GER_1.56.407.2_Radio_52.60.25.33_1.12. 25.16DE_Ship.exe" which worked in the bootloader mode. At least the screen "flashing was sucsessful" showed. The bootloader was the same and nothing changed.
After that I tried with "HSPLWrapper_Blackstone_156OliNex.exe", which is not working. It demands a connection with the ActiveSync, which I have on my Computer, but the only way the computer detectes the Phone is in the bootloader mode. In normal mode computer and active sync don't detect a phone.
So my questions to you:
Do you know a way to load the hard spl (from OliNex) to the phone, although I cannot connect it to ActiveSync? There should be one, because with the official data it "works" (or seems to).
Do you have any help?
Thankyou

Samuel ben jamin said:
Hello together
wish you nice eavening!
My Problem is the following: The only thing, on my htc touch hd T8282 that seems to work, is the bootloader.
Til five minutes ago I could read there:
BLAC 100 32M
SPL-1.54.0000
MicroP - BlackStone (LED) v6
now the following is added:
in the right, top corner: RUUNBH
in the green field: Upgrade ROM code error, Please try again
I think, this is because, in my helplessness, I interrupted the flashing process. But that's not the main problem.
Beside that, I can "start" the phone only by plugging in the USB cable from Computer or charging station. Then the phone vibrates, and the "smart mobility" screen comes up. After about 5 seconds it starts again, doing the same.
I tried hard resets, but it doesn't work. The only reason why I'm still trying to repair the phone is, that the bootloader is working. To me a signal, that somhow not everything is lost, but maybe I'm wrong.
I tried to flash the phone too. I tried first with the official "BlackStone_GER_1.56.407.2_Radio_52.60.25.33_1.12. 25.16DE_Ship.exe" which worked in the bootloader mode. At least the screen "flashing was sucsessful" showed. The bootloader was the same and nothing changed.
After that I tried with "HSPLWrapper_Blackstone_156OliNex.exe", which is not working. It demands a connection with the ActiveSync, which I have on my Computer, but the only way the computer detectes the Phone is in the bootloader mode. In normal mode computer and active sync don't detect a phone.
So my questions to you:
Do you know a way to load the hard spl (from OliNex) to the phone, although I cannot connect it to ActiveSync? There should be one, because with the official data it "works" (or seems to).
Do you have any help?
Thankyou
Click to expand...
Click to collapse
wel its saying spl so its original spl and not hspl
if you downloaded the german rom form the xda site it doesnt work as the spl in that rom isnt for youre device
if youre in bootloader try to flash hspl on it and then you can flash roms from the site
the other option is got to htc official site and look up the blackstone
there search the latest rom
if you want to download it you have to enter youre imei(can be found under the battery) with that code the rom youre going to download is only for oure device and is supposed to work for you
hope it helps

Thankyou for writing!
I downloaded and tested the rom from the htc site. I can run that and it comes up with the "successful screen". Then, the phone restarts, and I have the old problem, nothing changed.
As I mentioned before, I can not flash the hard spl from OliNex. That's my big problem. Because, also mentioned before, my phone is not recognized by the active-sync programm and in bootloader mode the HSPLWrapper from OliNex doesn't work.
hope there are some more replies and answers..

Samuel ben jamin said:
Thankyou for writing!
I downloaded and tested the rom from the htc site. I can run that and it comes up with the "successful screen". Then, the phone restarts, and I have the old problem, nothing changed.
As I mentioned before, I can not flash the hard spl from OliNex. That's my big problem. Because, also mentioned before, my phone is not recognized by the active-sync programm and in bootloader mode the HSPLWrapper from OliNex doesn't work.
hope there are some more replies and answers..
Click to expand...
Click to collapse
In activesync (or windows mobile device centre) go to connection settings and make sure that "allow usb connections" is ticked. Then retry connection device to computer. Put device into bootloader while connected. Does bottom of bootloader change from "serial" to "usb" after a couple of seconds?

In activesync "allow USB-connections" is ticked.
In the white, bottom part of the bootloader is written "USB" when connected to Computer. But if I connect it to the charging unit and start in bootloader, the white field is empty. I can't start it without any electricity source. Either there is another problem with the battery or, because you can't turn it off, the battery is flat all the time.
Also, the original htc blackstone rom-program, detects a connection to the phone, and is loading the rom properly, it seems. Because I could turn the bootloader screen back to where I already was once (by loading the official rom again):
BLAC 100 32M
SPL-1.54.0000
MicroP - BlackStone (LED) v6
Somehow it seems, that the power button is not working, I can't shut down when it is in bootloader, and can't really start the unit. But it's hard to say, 'cause it's starting automatically.
thanks