Hello to everyone, my Diamond makes calls by itself even if its locked. This is a serious problem and i don't know how to fix it.. Can somebody help me about this?
BillyBoy2 said:
Hello to everyone, my Diamond makes calls by itself even if its locked. This is a serious problem and i don't know how to fix it.. Can somebody help me about this?
Click to expand...
Click to collapse
looks like you got a virus ....
that was my first thought, but i set up a new rom last week and i have the same problem agian with the new one rom. So that's why i'm not sure that it's a virus.
BillyBoy2 said:
Hello to everyone, my Diamond makes calls by itself even if its locked. This is a serious problem and i don't know how to fix it.. Can somebody help me about this?
Click to expand...
Click to collapse
You probably should give a little more detail of the problem in order to get better help. Does it make the call to same person every time? Does it make the call on certain intervals? Are you using any particular programs when it happens? etc., etc. It's kind of like taking your car to a mechanic and saying..."The car won't start."
You say u used a new ROM and got the same problem..
But did u format the 4bg Internal Storage too (Boot manager asks to format the device storage or the internal storage too, don't know the correct spelling). This is while flashing new ROM.
Maybe a virus is on your 4gb internal storage and keeps installing himself.
TomInMB said:
Does it make the call to same person every time? Does it make the call on certain intervals? Are you using any particular programs when it happens?
Click to expand...
Click to collapse
It makes calls at the last outgoing number. I used to use the S2U2 program to lock my device in order not to push any button when i have it in my pants. sorry for my bad english, but i'm very dissapointed with my new diamond so that i'm thinking to sell it
the same thing happens with my diamond. i lock the phone by holding the hang up key, turn off the screen using the power button and use sensorlock to lock again, still, somehow, the phone will make calls to the last person in my call list. the only things i have added to the standard factory handset are:
1.93 rom from the orange.co.uk website,
diamond VRHologram 2.02,
sensorlock 0.40,
gyrator
and one mp4 format movie.
very frustrated. does anyone know what might be causing this problem? i´ve found that sensorlock can be bypassed ( i.e. screen unlocked ) by small movements rather than the full 360° turn which is supposed to be required, but the built in screen lock ( set to locking both hardware and screen buttons ) should still stop my handset from making calls.
also, sometimes, rather than make a call, i will unlock my phone to find the callender program launched, though tbh i think this was while i was only using sensorlock to lock the phone and may have been a result of my finger/palm touching the screen during the rotation gesture.
sorry for the long post, just trying to convey my situation as clearly as possible. if anybody has any solutions or ideas please reply or even pm me, i dont feel confident putting my diamond away because i never know what it´l do by itself, and its really peeing me off!
thankyou very much in advance
darius
BillyBoy2 said:
Hello to everyone, my Diamond makes calls by itself even if its locked. This is a serious problem and i don't know how to fix it.. Can somebody help me about this?
Click to expand...
Click to collapse
the same thing happens with my diamond. i lock the phone by holding the hang up key, turn off the screen using the power button and use sensorlock to lock again, still, somehow, the phone will make calls to the last person in my call list. the only things i have added to the standard factory handset are:
1.93 rom from the orange.co.uk website,
diamond VRHologram 2.02,
sensorlock 0.40,
gyrator
and one mp4 format movie.
very frustrated. does anyone know what might be causing this problem? i´ve found that sensorlock can be bypassed ( i.e. screen unlocked ) by small movements rather than the full 360° turn which is supposed to be required, but the built in screen lock ( set to locking both hardware and screen buttons ) should still stop my handset from making calls.
also, sometimes, rather than make a call, i will unlock my phone to find the callender program launched, though tbh i think this was while i was only using sensorlock to lock the phone and may have been a result of my finger/palm touching the screen during the rotation gesture.
sorry for the long post, just trying to convey my situation as clearly as possible. if anybody has any solutions or ideas please reply or even pm me, i dont feel confident putting my diamond away because i never know what it´l do by itself, and its really peeing me off!
thankyou very much in advance
darius
Click to expand...
Click to collapse
Guys, I'm kind and considerate, you're asking in the wrong forum, you should really be in the >Diamond>Diamond forum *and* you should be searching for the answer first.
Some people can be a little 'short' with new posters if you post without searching
Anyway, (as I'm kind and considerate) it's very unlikely to be a virus, it's more likely that your Diamond is turning on in your pocket and redialling your last dialled number, there are loads of threads about this, try searching for answerkeys disabler, what was wrong with S2U2 didn't that solve the problem.
HTH
Kim
I have a sprint cdma diamond. I have to turn off the screen during the call because my face will hit a button and do silly things. NOW even with screen off I will be in mid call and my diamond will dial a number on my other line. Think this is a hardware bug IMO happens at least 3 times a week
Headphones?
Just a thought ...
I find the button on the standard headphones very easy to knock and initiate last number dialling, could this be your cause?
If using the radio, I switched back to my old Jasjam headpones - WITH a volume control Otherwise the bluetoooth Motorola HT820's are good value.
It would be good if a warning came up first before it dialed out.
My Diamond is about to go in the bin!!!
If anyone knows how to edit the registry to "switch off" the volume keys on the Diamond then please, please, please help me.
The volume screen is permanently flashing on my screen, and seems to be stuck on the up button which means I can't use the phone. it's not a hardware issue as the buttons aren't stuck or won't work, it's from a bad flash (according to HTC!) - i've tried stock roms/MTTY etc but the problem still persists from one rom to another.
Any registry experts willing to help
Hello all,
I've an issue with HD2, when I receive a call and the phone was in sleep mode, the screen turn on, the "Slide to Reply" was shown, BUT I CAN REPLY USING THE PHONE BUTTON
That's very annoying, because if the phone is in my pocket, I can accidentally reply...
My question is, is there any registry value I changed for that?
How can I solve that issue?
Thanks!
No one?
Now I know, it's a normal behaviour (also HD1 do the same)...
But is there no way to solve it??
Hello,
These last days I had a lot of problems to align the screen of my Samsung Omni Addict player I900. The problem is that the touch screen is not centered anymore and it does not react when I press something on the screen.
To solve the problem I wanted to make a hard reset by using the following key combination "*2767*3855#".
My biggest problem is that, by mistake, I did lock the screen and keys of the phone and then when I press any key, my phone ask me to press the "Unlock" option on the screen, but I cannot do it as the touch screen does not react correctly.
I'm wondering if there is any possibility to edit the register to be able to unlock it.
Any other ideas are welcome. I'm blocked on this problem for two days now
Thanks in advance for your help,
Alain
Maybe I'm missing something but... can't you just soft reset it? I don't think it will boot up screen-locked....
Soft reset didn't help but after multiple tries I managed to do an hard reset which did solve the problem.
The problem I'm facing to now is that I cannot align the screen. As recommanded in different posts in this forum I have changed the CalibrationData value in the registery but still, after following the "align screen" procedure the screen does not react correctly. To be able to move forward I would like to be able to activate the mouse cursor. Do you know how could I activate it by changing a value in the registery?
If not I will create a new post with this question.
Thanks in advance.
Alain.
I'm sorry, haven't had an i900 in my hands for a while now, I don't remember which reg key you need
Hi everyone,
I have a problem. My screen is locked when I phone. This is really what I want. No dialing with my ear, not turning the microphone out with my ear while I´m phoning, and so on.
But...
If I´m calling a line where I have to press additional numbers (press 1 for service...) I cant do it cause the screen is locked.
Does anyone know how I can have the screen locked and still have the possibility to use additional numbers if I need it?
Thanks.
If you mean that the screen is still on but not responding, someone just a few days ago posted the same problem, and it was solved.
here's the post:
http://forum.xda-developers.com/showthread.php?p=15645647
thanks, I didnt see the post but it works.
great
gerdb said:
thanks, I didnt see the post but it works.
great
Click to expand...
Click to collapse
you're welcome
there's a search button to look for similar problems before you post, it's usually faster than posting a new one. there's also a thanks button at the end of the post (next to quote, quick reply, etc.) if you find the post helpful
so whenever someone helps you, hit their thanks button