Database Users

[Release] [Kitchen] - SuperJustKitchen v0.7 - Shields up!

SuperJustKitchen v0.7 Released.
Go to my site: http://justkitchen.info to get the updates and the info. It takes to long to update every device's forum that is supported, and I plan to support all devices.
For more information on the kitchen, please read: http://forum.xda-developers.com/showthread.php?p=4288668
Word of warning:
None of the new EXT's have been tested and fixed for the Herald, Opal, Hermes AND Artemis. Please test test and test and then let me know which packages don't work and what YOU've done to fix them. (I don't have time to fix ALL of them by myself.)
(I'm no longer updating each thread separately for each device but just updating my site and posting the release info here.)

ivanmmj said:
Now with Opal support!!
Wait until you see the announcement on my site to know that it's been updated/uploaded.
Word of warning:
SJK v.5 has had some major changes. None of the new EXT's have been tested and fixed for the Herald and Opal. Please test test and test and then let me know which packages don't work and what YOU've done to fix them. (I don't have time to fix ALL of them by myself.)
Take not that there are many versions of certain packages. Let me know if the older ones are close enough to the new ones so that I can delete the old ones.
Go to my site: http://justkitchen.info to get the updates and the info. It takes to long to update every device's forum that is supported, and I plan to support all devices.
At the moment, consider SJK v0.5 to be a test... Don't expect to have THAT many builds when it goes into v0.5.5
Right now it has the following builds available to you:
21054 (wm6.1)
21864 (COM2 - old style gui - wm6.5)
23064 (COM4 - newer gui - wm6.5)
5.5 will only have 21054, 21864, and 23064 unless something new gets released.
Click to expand...
Click to collapse
Thanks for providing us a new kitchen for opal. Can u give me a tutorial on using this kitchen for opal. Full explaination plz

It works exactly the same as your other Ervius based kitchen. You can follow that tutorial as well.
http://forum.xda-developers.com/showpost.php?p=4446173&postcount=3
The real difference is that I do the porting of new builds and the addition of new EXT packages for you.
(Granted, I've added more options under the Extra Buttons section, but you can go in there and figure out what most things are from their names and descriptions.)

Thanks BUT....
Thanks for your work man BUT: When i make my rom everything works Except the HOME settings and COMM manager,it is the same thing with BesFen kitchen,sometimes it works and then sometimes it does not.
I have tried and tried but nothing seems to help,i give up. I hope you guys can figure it out. Thanks.

What Home settings?
As far as the COMM Manager, don't choose the Comm manager in the EXT list. It's meant for older devices (like the Herald). Don't choose a Comm Manager at all. The OEM still has a comm manager built in. It will automatically insert a working comm manager.

Sorry i meant when you go to start/settings/Today does not work and i did not choose the comm manager, the one that comes with the oem does not work. Like i said sometimes they work and then it does not.

theglen35 said:
Sorry i meant when you go to start/settings/Today does not work and i did not choose the comm manager, the one that comes with the oem does not work. Like i said sometimes they work and then it does not.
Click to expand...
Click to collapse
Weird... The Today works fine on the Herald and it's part of the SYS, not the OEM. Are adding or not adding the MyCPL?
So the Comm Manager, even the one that's made FOR the phone has problems?

No i left out MyCpl. What is that BTW. The same thing happens in BesFen kitchen but it works when you put the PP on 12,anything higher it will not work.But i tried it on 12 & 16 PP in your kitchen but it does not work at all.Also when using file explorer and when selecting a theme when Today is working i have to long press or hold down the stylus to select something.

theglen35 said:
No i left out MyCpl. What is that BTW. The same thing happens in BesFen kitchen but it works when you put the PP on 12,anything higher it will not work.But i tried it on 12 & 16 PP in your kitchen but it does not work at all.Also when using file explorer and when selecting a theme when Today is working i have to long press or hold down the stylus to select something.
Click to expand...
Click to collapse
So it happens with BesFen's kitchen as well? The Opal is so strange and different than the other devices when it comes to cooking, I wonder what other changes I must make to the kitchen to get it work properly. At the moment, without an Opal, I can only make a kitchen as good as BesFen can when it comes to proper NB creation. Does anyone have a current WORKING kitchen for the Opal that doesn't have these problems? If so, point me to it and I will study the differences.
As a side note: Doesn't the Opal use myCPL by default? If it does, then you MUST choose it.

If you know PhamQuang you can ask him what kitchen he uses,his roms are usually buggy but i think the last one he made was good and everything works smooth.

You can find more detailed info on the kitchen in the main thread.
http://forum.xda-developers.com/showthread.php?t=545572&highlight=superjustkitchen
theglen35, I'll go ahead and try to contact PhamQuang. Thanks.

ivanmmj said:
As a side note: Doesn't the Opal use myCPL by default? If it does, then you MUST choose it.
Click to expand...
Click to collapse
Official Opal's ROM have MyCPL, it should be include in ROM.
The reason I made opal's kitchen because no one share working kitchen here, some one asked me to make kitchen for Opal.
PhamQuang is from PDAVIET, and as we all know they always don't want to share the kitchen and source. You can try to contact him, maybe they change their mind now.

BesFen said:
Official Opal's ROM have MyCPL, it should be include in ROM.
The reason I made opal's kitchen because no one share working kitchen here, some one asked me to make kitchen for Opal.
PhamQuang is from PDAVIET, and as we all know they always don't want to share the kitchen and source. You can try to contact him, maybe they change their mind now.
Click to expand...
Click to collapse
Hey BesFen THANKS very much for making a kitchen for the Opal,I have made many roms with it and except for a few problems it works good.But i think you should try and get all the bugs and problems worked out so we don't have to rely or wait for PhamQuang or PDAVIET to get any roms.
Because of the problems i am using Opals original WM 6.1 until you guys can figure it out.

theglen35 said:
Hey BesFen THANKS very much for making a kitchen for the Opal,I have made many roms with it and except for a few problems it works good.But i think you should try and get all the bugs and problems worked out so we don't have to rely or wait for PhamQuang or PDAVIET to get any roms.
Because of the problems i am using Opals original WM 6.1 until you guys can figure it out.
Click to expand...
Click to collapse
If your ROM can boot, it mean the kitchen work great.
The problem that you figure is not causes by the kitchen, it's pure something in the ext or OEM or SYS, try to read more reference from others device thread, I can't fix it since I don't have opal for test it, I am sorry about that.

ivanmmj said:
Now with Opal support!!
Wait until you see the announcement on my site to know that it's been updated/uploaded.
Word of warning:
SJK v.5 has had some major changes. None of the new EXT's have been tested and fixed for the Herald and Opal. Please test test and test and then let me know which packages don't work and what YOU've done to fix them. (I don't have time to fix ALL of them by myself.)
Take not that there are many versions of certain packages. Let me know if the older ones are close enough to the new ones so that I can delete the old ones.
Go to my site: http://justkitchen.info to get the updates and the info. It takes to long to update every device's forum that is supported, and I plan to support all devices.
At the moment, consider SJK v0.5 to be a test... Don't expect to have THAT many builds when it goes into v0.5.5
Right now it has the following builds available to you:
21054 (wm6.1)
21864 (COM2 - old style gui - wm6.5)
23064 (COM4 - newer gui - wm6.5)
5.5 will only have 21054, 21864, and 23064 unless something new gets released.
Click to expand...
Click to collapse
thanks ivan u've done great... thanks for having opal too in ur kitchen.. hopfully everything work great like the herald... ur the best... i thought i'll never see u since my phone is not the wing no more its touch viva now.. cuz i like wat u done for herald lots cooks already doing different roms... it is impressive... hopfully i'll start my own too... for here... thanks alot ivan keep it up...

BesFen said:
Official Opal's ROM have MyCPL, it should be include in ROM.
The reason I made opal's kitchen because no one share working kitchen here, some one asked me to make kitchen for Opal.
PhamQuang is from PDAVIET, and as we all know they always don't want to share the kitchen and source. You can try to contact him, maybe they change their mind now.
Click to expand...
Click to collapse
Yea, if the Opal comes with the MyCPL and they don't choose it, then that's part of the problem.
I agree with you, though. Technically, the issue is not with the kitchen but with what you DO with the kitchen as a cook. Since I don't have an Opal either, I won't be able to look around and preemptively fix all the bugs by pre-packaging certain EXT's into the OEM.
I also appreciate you working on that Opal kitchen. It's what I used as an example to get the Opal compatibility on my own kitchen. I appreciate your advise about PDAVIET.
ob_izzy, now it's your turn to be a great cook. ^_^

I agree with you, though. Technically, the issue is not with the kitchen but with what you DO with the kitchen as a cook. Since I don't have an Opal either, I won't be able to look around and preemptively fix all the bugs by pre-packaging certain EXT's into the OEM.
Come on guys, what are you saying? Both of you are making a kitchen for a device that you don't have and can't test and you are saying it's not the kitchen! I beg to differ because believe me i have tried all sorts of ways to get the rom to work including reading alot, re-arranging files, adding, leaving out, different PP. Maybe it still has stuff to add or leave out that i don't know about, so that is where you guys come in. I need PLEH.

theglen35 said:
I agree with you, though. Technically, the issue is not with the kitchen but with what you DO with the kitchen as a cook. Since I don't have an Opal either, I won't be able to look around and preemptively fix all the bugs by pre-packaging certain EXT's into the OEM.
Come on guys, what are you saying? Both of you are making a kitchen for a device that you don't have and can't test and you are saying it's not the kitchen! I beg to differ because believe me i have tried all sorts of ways to get the rom to work including reading alot, re-arranging files, adding, leaving out, different PP. Maybe it still has stuff to add or leave out that i don't know about, so that is where you guys come in. I need PLEH.
Click to expand...
Click to collapse
The kitchen only puts things together. What the stuff does depends on the OEM's and EXT's included. If you took all the EXT's that came with the official Opal ROM, you may not have any bugs because the manufacturer has worked out all those little bugs. If I had an Opal to play with, I'd probably find all the bugs myself and fix them (like I did with the Herald.) Unfortunately, we need the help of a very experienced Opal cook who HAS an Opal. (Or I need an Opal, which isn't happening since I have a G1 as my main phone and wouldn't buy an Opal to replace it (nothing wrong with the Opal, but I love android. )

theglen35 said:
Come on guys, what are you saying? Both of you are making a kitchen for a device that you don't have and can't test and you are saying it's not the kitchen! I beg to differ because believe me i have tried all sorts of ways to get the rom to work including reading alot, re-arranging files, adding, leaving out, different PP. Maybe it still has stuff to add or leave out that i don't know about, so that is where you guys come in. I need PLEH.
Click to expand...
Click to collapse
You can make an experience, dump the official opal's ROM (ruusigned.nbh) with Visual kitchen from mine or ivanmmj, go to the official rom folder, there is a "dump" folder there with Ervius kitchen tools, then run that kitchen and build the rom, it will build ROM same as official that you dump. If it run well, no problem with the kitchen.

BesFen said:
You can make an experience, dump the official opal's ROM (ruusigned.nbh) with Visual kitchen from mine or ivanmmj, go to the official rom folder, there is a "dump" folder there with Ervius kitchen tools, then run that kitchen and build the rom, it will build ROM same as official that you dump. If it run well, no problem with the kitchen.
Click to expand...
Click to collapse
Great suggestion man. I tried it and it did build the 6.1 rom without problems but it builds 6.1 good but not 6.5. When it builds wm 6.5 there are problems.

ROM Cooking Problems

Hey I hope I'm doing the correct thing by posting this new thread i don't do that very often have got a couple of final issues with my ROM.
A little query does any one know the reg entry which sets the time of the phone and matches it with the network time. ( this does not include location service or data connection ) please help.
I have included autotime zone fix from the topaz s2 ROMs.
and the following reg enteries:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"NITZEnable"= dword:00000001
[HKEY_LOCAL_MACHINE\Software\OEM\PhoneSetting]
"ShowN ITZPage"=dword:00000001
Thanks.

BUMP pLease ?

Well it seems that your questions i quitly discused before... but please tell us whats the problem of dont works good at all... with the phone canvas?
Remember that phone canvas have issue in new builds... like history call and or.. id caller...
Then.. wich time in the phone...??? the current call time?

+ Que PPC said:
Well it seems that your questions i quitly discused before... but please tell us whats the problem of dont works good at all... with the phone canvas?
Remember that phone canvas have issue in new builds... like history call and or.. id caller...
Then.. wich time in the phone...??? the current call time?
Click to expand...
Click to collapse
No no the issue is not about caller ID ( my build is 23529/23549 ) which has no such issues.
My problem is i can't find a Canvas which supports Video Call and Conferance for VGA.
I tried Qlin dialer but it does not work very well..
and i can't figure out what all to cook with leo dialer and i cant even fin where to download trust me i have searched alot. ( as leo is WVGA and i need VGA ... )
and by other problem is the clock of the phone
earlier when i did not used to cook and used others ROM when i used to switch on the phone ( Radio ) the time and date sue to get set on its own according to city,
( this is not using data connection or mylocation ) but now i have to always manually set the time and date...
even my location service does not update the time and date...
any help regarding these is much appreciated..

But do you need it for Raphael?...i didnt know that it has VideoCall support.....anyway Diamond is VGA and for what i know it has Videocall as well, so you can just dump a stock rom from Wi-Ki and grab it.

af974 said:
But do you need it for Raphael?...i didnt know that it has VideoCall support.....anyway Diamond is VGA and for what i know it has Videocall as well, so you can just dump a stock rom from Wi-Ki and grab it.
Click to expand...
Click to collapse
YEah all the Rapheal chefs have video call support.
I personally don't need it but if some one else is using my ROM they may need it.
Some Raph Chef if answers this it would be great.
I'm sure NRGZ can help if he sees this.
Thanks guys.

i have timezone autofix pkg from rhodium 2.07 rom in my kitchen, and also this reg.
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"NITZEnable"= dword:00000001
[HKEY_LOCAL_MACHINE\Software\OEM\PhoneSetting]
"ShowN ITZPage"=dword:00000001

twopumpchump said:
i have timezone autofix pkg from rhodium 2.07 rom in my kitchen, and also this reg.
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"NITZEnable"= dword:00000001
[HKEY_LOCAL_MACHINE\Software\OEM\PhoneSetting]
"ShowN ITZPage"=dword:00000001
Click to expand...
Click to collapse
Thank you sir will try this.
Any help anybody on guiding me to a 3G phone canvas for VGA.

madnish30 said:
Thank you sir will try this.
Any help anybody on guiding me to a 3G phone canvas for VGA.
Click to expand...
Click to collapse
Have you tried QILIN Phone Canvas VGA ported by amarullz?
Here is the link
http://forum.xda-developers.com/showpost.php?p=5063301&postcount=7
Hope it helps

dotcompt said:
Have you tried QILIN Phone Canvas VGA ported by amarullz?
Here is the link
http://forum.xda-developers.com/showpost.php?p=5063301&postcount=7
Hope it helps
Click to expand...
Click to collapse
Thanks it helped.
The problem was i was cooking both the qilin and rhodium dialer thinking that the qilin will overwrite the rhodium.but now only qilin is what i cooked and it works like a charm.
now the only problem is the time sync with network operator the reg enteries did not work...
can someone please help me here.

madnish30 said:
Thanks it helped.
The problem was i was cooking both the qilin and rhodium dialer thinking that the qilin will overwrite the rhodium.but now only qilin is what i cooked and it works like a charm.
now the only problem is the time sync with network operator the reg enteries did not work...
can someone please help me here.
Click to expand...
Click to collapse
are you sure? i mean ,do you know for sure that your carrier support that feature?
if you know that you carriers support it ,then translate the above reg key into .provxml file.

faria said:
are you sure? i mean ,do you know for sure that your carrier support that feature?
if you know that you carriers support it ,then translate the above reg key into .provxml file.
Click to expand...
Click to collapse
Yes sir it did support on the ENRGY ROMs and CHROME ROMs.
As soon as i used to turn the phone ( Radio ) on the time used to sync it self within 10 seconds.
I'll try to translate it to provxml file.

Hey faria!!! how are you!??? nice to see you around!!!!
The reg is wrong be care with that i had teh same issue before
"ShowNITZPage"=dword:00000001
this is the correct one... be care with the space between "N_ITZ"

[REQ] Oskitchen Help

I am going to give chef'in a try and as I have never done it before I would ask you to be patient with me.
I have the HTC Leo with Radio 2.10.50 and HSPL installed.
Im using oskitchen and so far I have updated a Stock rom to 6.5.5. Nothing difficult there I hear you say ! But hey, its my first working ROM.
Now I have 2 questions that I hope you can help me with.
Q1. When I flashed the ROM to my phone all worked as you would expect apart from the main screen looked like it had dropped down about 10 pixels. Top and bottom bars looked OK but the middle looked wrong (Screen coming if needed)
Q2. Can someone instruct me on how to set the default wallpaper from oskitchen ?
I have an image called HTC_BG.png and I would like to cook it into the ROM as the default wallpaper.
Ive looked on the forums for help with these questions but I am unable to find them.
Any help / links would be helpfull
Once I have this info, I will proceed to cook my ROM and eventually post the results on the forums along with a complete tutorial as I go along, for those who are looking for similar info.

I have any problems with the buttons and the prefrence folders.
I have create a clip how can you see this problem.
h**p://youtube.com/watch?v=qmDQOzCIWu8
I hope i exist a fix, or what are the right kitchen for the Leo??

BoTTeR1337 said:
I have any problems with the buttons and the prefrence folders.
I have create a clip how can you see this problem.
h**p://youtube.com/watch?v=qmDQOzCIWu8
I hope i exist a fix, or what are the right kitchen for the Leo??
Click to expand...
Click to collapse
From what I know dumping and rebuilding a Leo ROM works correctly on both oskitchen 1.30v3 and 1.31beta3 so you probably changed something that broke that stuff. Always try if a clean dumped ROM rebuilds fine before doing changes that may break it.

Okay... I think im not so Stupid to do this.
I go this way:
1. I Install (extract) OS Kitchen on a folder into my Harddrive (C:/OS)
2. Then i Load the original Rom, extract this to get the RUU_Signed_0407.nbh
3.I Start OSKitchen and klick on Import-> Import a new ROM file.
4. I Select my Model, HTC Leo (HD2) and type the pfad of the RUU_Signed_0407.nbh and go to next (Waiting a minute)
5. I klick on start bulding, and os kitchen go throte without errors..
I Flash the Rom...
And the Taps didn't work. I Have a Windows XP OS and the OS Kitchen Version is 1.31.alpha4

BoTTeR1337 said:
Okay... I think im not so Stupid to do this.
I go this way:
1. I Install (extract) OS Kitchen on a folder into my Harddrive (C:/OS)
2. Then i Load the original Rom, extract this to get the RUU_Signed_0407.nbh
3.I Start OSKitchen and klick on Import-> Import a new ROM file.
4. I Select my Model, HTC Leo (HD2) and type the pfad of the RUU_Signed_0407.nbh and go to next (Waiting a minute)
5. I klick on start bulding, and os kitchen go throte without errors..
I Flash the Rom...
And the Taps didn't work. I Have a Windows XP OS and the OS Kitchen Version is 1.31.alpha4
Click to expand...
Click to collapse
Update to 1.31beta3 because anything before the beta1 had issues with HD2

like Shaddex I am looking into creating ROM's from scratch (for HD2 Leo also!), first for personally use and maybe for general if I can get a ROM to look nice.
My question is, is there a kitchen which work's best for the HD2? Or are all basically generic and just "cook" in different ways?
Sorry to hijack your post Shaddex I hope you get an answer soon, wish I could help

And back on topic
Ok. I extracted Oskitch again, added "RUU_Leo_HKCSL_WWE_1.72.831.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship"
as the base ROM.
Next installed the "24619_MSXIPKernel_SYS_QVGA_WQVGA_HVGA_VGA_WVGA_0409" so I can use the latest build.
Thats all I did.
No extra EXT packages, Just cooked the ROM and below is what I get.
Anyone shed any light ?

5haddex said:
And back on topic
Ok. I extracted Oskitch again, added "RUU_Leo_HKCSL_WWE_1.72.831.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship"
as the base ROM.
Next installed the "24619_MSXIPKernel_SYS_QVGA_WQVGA_HVGA_VGA_WVGA_0409" so I can use the latest build.
Thats all I did.
No extra EXT packages, Just cooked the ROM and below is what I get.
Anyone shed any light ?
Click to expand...
Click to collapse
The 6.5.3 windows mobile builds have the top and bottom bar of different sizes while Manila is probably calibrated for the WM6.5 bars (indeed there's empty space at the top and overlap at the bottom). There is probably something else you have to do to fix manila after changing the windows mobile build but I'm pretty sure it's not a kitchen problem I've had several people reporting the Leo ROMs dump and build fine with the 1.31 betas.

Is anyone willing to assist me on getting a Stock HD2 rom and upgrading it to 6.5.x without the problems I am seeing ?

5haddex said:
Is anyone willing to assist me on getting a Stock HD2 rom and upgrading it to 6.5.x without the problems I am seeing ?
Click to expand...
Click to collapse
Could you post a screenshot of your problem, and if you upload your background, i will use it to replace the one in HTC Black.TSK (You need OCP CE CAB Manager)

I have posted a screenie of the problem and someone says its because manila is not the correct version for the 6.5.5 im using.
Dont suppose you have a 6.5.5 stock rom ???

So...
Can anyone let me have a oskitchen with 6.5.x + latest manila so I can add to it.

[Q] Problem with Phone Canvas Enhancement 2G v4.0.52619223128.0 in com2 build.

Problem with Phone Canvas Enhancement 2G v4.0.52619223128.0 in com2 build.
Hi all, just have an issue and I can't point the finger on the right place to get this one solved
So I'm asking for some help, I'm using the Phone Canvas Enhancement mentioned above, and it works perfect on a com3 build but
for some reason when I cooked this one in a com2 build the options for the dialer are not working.
I'm using the same kitchen, for com3 and com2 with the same pkg's and everything is working the way it should work.
Only in the com2 build I'm not able to setup the call-specific options.
Already changed the mui files, used another dummy_sqm but still no difference.
The com2 build I'm using is 21916, also tried 21914 but no difference.
Someone else have any idea ?
Thanks,

Ok, just want to give it one more try so BUMP

Hi,
Did you dump the rom yourself or are you using predumped packages?
Phonecanvas in com 3 needs some fixes like the softkeypad.
Also did you look in operatorpkg?
Have a look there which phcanOverbmp.
Is it HTC or T-Mous?
That's all I can think of.

Laurentius26 said:
Hi,
Did you dump the rom yourself or are you using predumped packages?
Phonecanvas in com 3 needs some fixes like the softkeypad.
Also did you look in operatorpkg?
Have a look there which phcanOverbmp.
Is it HTC or T-Mous?
That's all I can think of.
Click to expand...
Click to collapse
I dumped the rom myself, import the 23569 build and import the 21916 build, made a small change on the 21916 build (changed office mobile to office mobile 2010) and edit the file phcanrc, build rom in 23569 no problem, and in 21916 issue with the options.
There is not much left in my operatorpkg only the animated.gif and the Mega_phcanOverbmp, so I have to see if that causes the issue, but I still think it's strange that I don't have it with the 23569 build.
For now really thanks for the info, I'm gonna work on it and keep you informed if this will solve it.
Btw nice site you have
Greetz,

Try to use the phonecanvas as it's (if possible) and use the correspondending phcan in operatorpkg.
Another thing you need to check is the reg in operatorpkg, if it directs to the phcan you are using.
In my case:
[HKEY_LOCAL_MACHINE\Security\ResOver\Bitmaps]
"Basedll"="leo_phcanOverbmp.dll"
"BaseId"=dword:00000000
"BatteryIconIdStart"=dword:000003E9
"BatteryIconLevels"=dword:00000015
Click to expand...
Click to collapse
Thanks for the compliment about the site.
Rataplan said:
and edit the file phcanrc, build rom in 23569 no problem, and in 21916 issue with the options.
There is not much left in my operatorpkg only the animated.gif and the Mega_phcanOverbmp, so I have to see if that causes the issue, but I still think it's strange that I don't have it with the 23569 build.
Greetz,
Click to expand...
Click to collapse

What do you mean with "call specific options"?

pkoper said:
What do you mean with "call specific options"?
Click to expand...
Click to collapse
I mean the advanced options, sounds, network, gsm/umts, headset it's a submenu from the dialer, I think that Laurentius26 is right because I miss the registry key for phcan, I'm gonna check it this evening.
Still wondering why I don't have a problem with a com3 build.
Keep you all informed

Somewhere in sys, maybe Phone or Phoneredist I can't remember, it is set to not display.
Check your reg for
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
remove
redirect=""
if its there.

pkoper said:
Somewhere in sys, maybe Phone or Phoneredist I can't remember, it is set to not display.
Check your reg for
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
remove
redirect=""
if its there.
Click to expand...
Click to collapse
Okay thanks gonna try that, because changing the reg. made my kitchen crash.
Greetz,

Ok, I give up, I build 12 roms with 21916 (all different languages) until I noticed the issue, went back to 21914, same issue.
Tried what you both suggested, kitchen start crashing, went back to the original 21854 with the same pkg everything working normal also the options menu in the dialer.
So the problem must be in the changing the office pkg or a kitchen-update because thats are the only things I've changed.
And I'm not even sure about the kitchen-update.
For now I'm not sure what I've changed to give an honest answer if I get this solved.
Just want to say thanks the both of you, together is power
Regards,

I went through some unmodified builds.
The reg key is in the rgu in SYS\Phone....
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Redirect"=-
Sorry, made a mistake in the previous post

pkoper said:
I went through some unmodified builds.
The reg key is in the rgu in SYS\Phone....
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Redirect"=-
Sorry, made a mistake in the previous post
Click to expand...
Click to collapse
Yes, I know, I already found that reg key, but for some reason my kitchen keeps on crashing when I use the 21916 build, so I can not tell you if the trick you told me is working.
In short what I tried:
1. Edit the reg key for the phcan.
2. Deleting the reg key in the Phone pkg.
3. Changing the Phone pkg and use the one from 21854.
4. Building without ext-pkg
5. Make a switch to 21914 and repeated the 4 steps mentioned above.
But for now the kitchen keeps on crashing when I'm using the 21914 or 21916 build, which is very strange because I cooked several roms with it also cooked without the office pkg but still no change.
For now I'm gonna download another com2 build and see if that will do the trick.
In Dutch: Schiet mij maar lek.
In English: Shoot me.
And again really thanks for trying to help me.
Greetz,

Sorry forget my post.

Ok downloading and importing the 21916 again did the trick, download the build from mobileunderground, normally I used the builds from ppckitchen not sure if they are different.
The only thing I can think about for now is that when I'm upgrading my kitchen, went from 1.25 to 133.3 (oskitchen) always in small steps but the only thing I changed was the exe file and the resource folder, and maybe there it went wrong.
I know it is not a real solution but for me this one is solved.
Thanks,

Polaris WM6.5-21901 German full and only

This is a full and only german WM6.5 COM2 21901 ROM.
I made this ROM for my personal needs and my old Polaris. To give him a new live.
Thanks to all Cookers/Developers! Without their knowledge I would not succeed finding the present solution.
This ROM was build with Barin's wonderful OSBuilder kitchen and unlike other ROM's, you can dump and recook it. All RGU/DSM files are inside (it's a real signed ROM). Feel free to modify it, to fit your needs! Please share the knowledge with the community. Sharing the knowledge rather than keeping it secret is the biggest improvement.
ROM-Base:
WindowsMobile Build 6.5.x COM2-21901
Polaris Native Kernel 6.5 (101MB)
Polaris OEM 3.19 with (massiv) modifications
Packages from Mega (most), Iolite and Topaz
Some custom packages and tweaks
Q: Why to hell a COM2-Build?
A: I dont like the big buttom bar in COM5. That's all.
Q: What packages are inside?
A: Most of Mega, No Manila2D, EzInput 1.5...download and take a look
Downloads:
Please read Post #11! New ROM: 21901_007 (06.05.2011).

I will give it a try because I was searching a german 6.5 Rom for a long time.
Whats about the 3D-Drivers for the polaris, are they included ?
Happy Holidays

MrGame said:
Whats about the 3D-Drivers for the polaris, are they included ?
Click to expand...
Click to collapse
Sorry,
3D-Drivers are NOT included. Because the used Kernel is incompatible. If I can find a NK 6.5 for the Polaris with 85MB-RAM (current 101MB) enabled, then I can try to build with the drivers included.
c.u.

MrGame said:
I will give it a try because I was searching a german 6.5 Rom for a long time.
Whats about the 3D-Drivers for the polaris, are they included ?
Happy Holidays
Click to expand...
Click to collapse
if you really need a 3D-drivers for Polaris !!! This use

s_marth said:
Sorry,
3D-Drivers are NOT included. Because the used Kernel is incompatible. If I can find a NK 6.5 for the Polaris with 85MB-RAM (current 101MB) enabled, then I can try to build with the drivers included.
c.u.
Click to expand...
Click to collapse
you should first edit the ROM using HTCRIE, after in edit you can add files 3D-ROM Driver files

Hakim Rahman said:
you should first edit the ROM using HTCIRT, after in edit you can add files 3D-ROM Driver files
Click to expand...
Click to collapse
Wich part of ROM should I edit with HTCIRT?
You cannot use 3D-Drivers with the current Native 6.5 Kernel in my ROM. The kernel is hacked to use the area between 85MB -> 101MB as RAM. The 3D-Drivers like to use this area for DDI.
That's the problem. If I'm wrong, feel free to show me the right way.

s_marth said:
Wich part of ROM should I edit with HTCIRT?
You cannot use 3D-Drivers with the current Native 6.5 Kernel in my ROM. The kernel is hacked to use the area between 85MB -> 101MB as RAM. The 3D-Drivers like to use this area for DDI.
That's the problem. If I'm wrong, feel free to show me the right way.
Click to expand...
Click to collapse
sorry I have to straighten, not htcirt but HTC ROM Image Editor , yes it is definitely ruu signed.nbh in ROM which you make with HTCRIE you can add it or subtract the necessary application files survivors trying & good luck

Hello s_marth,
great ROM, I like it!!
But I use Radio-ROM 1.59.44.02, and I had also wakeup problems. Do you have another solution?
The keylock doesn't work. I don't want to use s2u2. Could you fix it?
Matthias

siggilein said:
Hello s_marth,
great ROM, I like it!!
But I use Radio-ROM 1.59.44.02, and I had also wakeup problems. Do you have another solution?
The keylock doesn't work. I don't want to use s2u2. Could you fix it?
Matthias
Click to expand...
Click to collapse
Hi Matthias,
I also had wakeup hangs with 1.59.44.02 (not so often as with 1.59.46.12). I'm using 1.59.42.15 at the moment. Over the last 4 days I had no problems.
What you mean? Keylock or lockscreen? For keylock please have a look at: Einstellungen -> Persönlich -> Tastensperre. It works for me.
For automatic lockscreen I use LockDevice 1.6.
cu
Sven

Hi All,
I found a big bug in my ROM!
Please edit the registry to the values in the code window and take a soft-reset:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\TFLOSettings]
"EnableScroll"=dword:0
"EnableSound"=dword:0
"EnableCube"=dword:0
Setting "EnableScroll" to "0" is the most important!
If it is set to "1", the HTC touch.dll/biotouch.dll conflicts with the WM 6.5 builtin touch driver. Typical symptoms are random short hangs while scrolling and lame phone canvas. After edit and soft-reset you get a real fast device.
cu
Sven

Hi All,
here you find a new version of my german ROM for the Polaris.
Changes:
Titanium only! No more Manila2D inside. For me, it is useless bulk.
Fixed scrolling (post #10).
EzInput 1.5 fixed, Landscape added, US and DE keyboards only
LockScreen fixed, HTC-LockScreen-Enh. removed.
Transcriber, Windows Live, Footprints, Manila2D are only present in the kitchen (you can get by request)
EDIT-07.05.2011:
Switching from package "MEGA_Power" (powerexe.exe 2.28) to "POLARIS_Power" (powerexe.exe 2.14). I hope this was the end of search for the reason of random freezes or "sleep of death".
If you like to cook your own ROM, PM me for the kitchen.
Downloads:
EDIT-07.05.2011: New ROM with essential fix, you should upgrade
ROM: https://rapidshare.com/files/461069339/ROM_21901_007.7z

THX,
for this german rom in the Year 2011.
Rom Flash is done. Now i Test you Rom in the next weeks. I hope ist work for me.
Gruss Lothar

many Thanx to u for this great work. I installed it two weeks ago, and it works great. The only thing what is boring is the time to what until xda has manage contact or sms service. I dont know whats going on, and i installed htcs qwertz tab because all other tabs hasn´t work well. Hope i can help with your great work.
cheers
sorry 1 exception xda freezing if the display is fading away, until i push powerbutton. then booting finalized its work... any Idea how to handle it.

Just downloaded and its wirks fine.But it is possible, to make the icons and text in the menue bigger. 3 icon per line ?
zm

dl1bjy said:
Just downloaded and its wirks fine.But it is possible, to make the icons and text in the menue bigger. 3 icon per line ?
zm
Click to expand...
Click to collapse
You can allways build your own ROM with my kitchen by request. 3 icons per line is the WM default.
cu

skysegel said:
sorry 1 exception xda freezing if the display is fading away, until i push powerbutton. then booting finalized its work... any Idea how to handle it.
Click to expand...
Click to collapse
Hi skysegel,
sorry I forgot to put some modules to slot0. This is fixed in my last ROM (21901_006 from 10.03.2011). I had tested the new ROM over 1 month and got no freeze or SOD anymore.
cu

Little better, or streamline some better!

sleep of death within 5 minutes 3 ​​times.
23.05.11:
Today, only one time

lazomi said:
23.05.11:
Today, only one time
Click to expand...
Click to collapse
Hi lazomi,
please perform a Hard-Reset after flashing the ROM. This action formats the flash and loads factory defaults.
cu
Sven

hi,
i flash mein xda orbit 2 with your ROM_21901_007 few days ago, yesterday i have several times sleep of death only unplug the battery helps...
and yes i made a hardreset after flashing
at the moment i change the settings "Tastensperre" to "Tasten nicht sperren" and no sleep of death so far
what can i do?
p.s. sorry for my bad english