Database Users

What files to copy on tomtom...

When i try to install tomtom5 on my device the application doesnt seem to find my device and crashes.
What i'm planning to do is just copy the needed files on the Wizard's memory card and try and install the cabs from there. Does anyone know what files i need to copy and how i can go about getting the app running this way?
And in what order the files need to be installed and what other folders i need to copy over?

OK, no problem... I got my TTN 5 as SD card only, this was what i found on the card :
ROOT:
Files:
AUTORUN.INF
connect2internet.db
connect2internet.so
DATA.CHK
SPLASH.BMP
SYSTEM.
TOMTOM.AID
TOMTOM.ICO
TTGO.BIF
TTSYSTEM.
MAP:
- 2577 (2577 is a 'autorun'directory, rename after install, or give it another name and put the setup cabs here and just tap 'em )
Files:
AutoRun.exe
autorun.exe-run
GPS.CAB (GPS Drivers 1st)
PIMAddIn.cab ('Navigate to/Show on Map in Contacts)
START.EXE (Flash)
TTN.CAB (The Main program)
WZD.CAB (The Today Plugin)
MAP:
- Benelux_Plus-Map (could be just 'Benelux_Map' in your case ?)
Files:
Benelux_Plus.mid
*.DAT
Benelux_Plus.pna
Benelux_Plus.mms
*.ov2
*.inf (of above *.ov2 )
MAP:
- ITN
(Empty)
MAP:
- Licences
Files:
LIC_*.TXT
GNU General Public License.txt
GPL-offer.txt
MD5_license.txt
ogg-vorbis_(tremor-variable)_license.txt
Read Me First.txt
coroutine_license.txt
Map:
- PALM
Files:
START.PRC
- Submap ! : LAUNCHER
Files:
CN.PRC
MAP:
- Raster
(Empty)
MAP:
- Schemes
(Empty)
MAP:
- TomTom
Files:
_do_not_remove.txt
DATA.CHK
Munich.bin
TOMTOM.AMS
MAP:
- TomTom-Cfg
Files:
Birthday.txt
MAP:
- Voices
Files:
*.VIF
*.CHK
MAP:
- ZIP
Files:
Nederland.Postal
HTH

Appreciate the above info. I do seem to have all those files.
But when i install the cabs in the 2577 directory, they install fine, but i dont see the tomtom app in the program list and cant see any indication of new icons or any way i can access the app? i can see the files in the uninstall section however...

Do you get a map under "Porgam Files" named "Navigator" ?
Inther you should find the executable for TTN, you can make a link to the exe then...

ump001 said:
Appreciate the above info. I do seem to have all those files.
But when i install the cabs in the 2577 directory, they install fine, but i dont see the tomtom app in the program list and cant see any indication of new icons or any way i can access the app? i can see the files in the uninstall section however...
Click to expand...
Click to collapse
I had the same issue last night when I tried ot install. Solved it by loading the 5.21 update from the tomtom website.
Tomtom working now....

editing Navipanel

Is it possible to edit Navipanel so it launches TomTom instead of Copilot?

NaviPanel and Igo8
Yes its possible,
this is my way of doing(maybe there is better one
1.Copy all files and folders except CONTENT folder(the bigges one) from IGO8 directory to Program Files\Copilot\ - you will replace Audio folder(if you didn't deleted all from here.
2.Rename iGO8.exe to copilot.exe and just in case make one copy of this file with name splashscreen.exe
3.Edit sys.txt to point to the content folder
[folders]
content="Storage Card/iGO8/content"
4. Enjoy
Regards.

Worked finr for me
Tried it on my UK HTC HD2 according to your instructions - all worked ok
No i have Navipanel running igo8 instead of Copilot
Thanks a lot !!!!!!!!!!!!!!!!!!!!!!!!

is it possible to point the data+branding folders as well so i can save some space on device

if you have installed igo on your SD card, you just have to copy iGO8.exe, sys.txt, and GPSTMC.dll in ProgramFiles/Copilot/, then rename iGO8.exe to copilot.exe (and do the splashcreen thing, just in case )
your sys.txt must contain
[folders]
app="Storage card/igo_folder_as_you_named_it"
hope it helped

Hi,
is there a way to use Navigon MN7 instead of CoPilot? My MN7 works manually in Landscape mode, no Problem, but i want to start it with the NaviPanel. How to do?
Thanks for any help...

dusty_nz said:
Is it possible to edit Navipanel so it launches TomTom instead of Copilot?
Click to expand...
Click to collapse
Just found this on another site, tried it and it works a treat.
To make TomTom replace copilot:
-You have to install tomtom to your SD card
-Locate the install dir of tomtom after you have installed it
-Locate the navigator.exe and copy it to another folder
-Rename the navigator.exe in the tomtom folder to copilot.exe
-Rename the navigator.exe you made copy off to splashscreen.exe
-Copy the splashscreen.exe back to same folder as the new copilot.exe is
-Rename the tomtom folder (or what ever the name is) to copilot.
-Copy the new copilot folder, and then locate the original copilot folder on device storage (Program Files/CoPilot) and paste the new folder over the original (DO NOT DELETE THE ORIGINAL FOLDER FIRST)
-Soft reset, and it should work just fine

Hilli_S said:
Hi,
is there a way to use Navigon MN7 instead of CoPilot? My MN7 works manually in Landscape mode, no Problem, but i want to start it with the NaviPanel. How to do?
Thanks for any help...
Click to expand...
Click to collapse
Hi,
I´m also trying to get MN7 startet that way (But on Rhodium with Navipanel from Leo coocked in). I copied \Windows\StartMN7.exe to the \Program Files\Copilot folder and renamed it to copilot.exe. Than the same again and rename it to splashscreen.exe. But when I start MN7 within Navipanel I get an error: "Turn landscape orientation error !" and MN7 starts in portrait mode.
When closing MN7 : "Turn back orientation error".
When I start MN7 directly with \Windows\StartMN7.exe everything is fine...
EDIT: Now it´s working for me. Either it was the Soft reset i did, or the changes I made to the G-Config APP. Copilot.exe was configured in G-Sensor App.
Now the next question is if it´s possible to link the Buttons "Go Home", "Recent" and "Adress" to the corresponding actions in MN7... That would be cool and would make Navipanel more useful.
Mister.Knister
Mister.Knister

dbryan said:
Just found this on another site, tried it and it works a treat.
To make TomTom replace copilot:
-You have to install tomtom to your SD card
-Locate the install dir of tomtom after you have installed it
-Locate the navigator.exe and copy it to another folder
-Rename the navigator.exe in the tomtom folder to copilot.exe
-Rename the navigator.exe you made copy off to splashscreen.exe
-Copy the splashscreen.exe back to same folder as the new copilot.exe is
-Rename the tomtom folder (or what ever the name is) to copilot.
-Copy the new copilot folder, and then locate the original copilot folder on device storage (Program Files/CoPilot) and paste the new folder over the original (DO NOT DELETE THE ORIGINAL FOLDER FIRST)
-Soft reset, and it should work just fine
Click to expand...
Click to collapse
Good find, and working great!
Thank you.

Thanks a lot my friends.

Tried the above setting for my navigator Mapking 2007 and it works like a breeze. Thanks.
Does anyone know how can i do the same for McGuider? Tried the same settings but it wouldnt work.

htc-hd2 said:
Good find, and working great!
Thank you.
Click to expand...
Click to collapse
Can I just check, when you say it is working great, does tomtom navigate to your home when you press home, and to your footprints? I have followed the procedure, but while tomtom launches instead of copilot, it does not plan a route. Any suggestions for getting this to work?

dannykap said:
Can I just check, when you say it is working great, does tomtom navigate to your home when you press home, and to your footprints? I have followed the procedure, but while tomtom launches instead of copilot, it does not plan a route. Any suggestions for getting this to work?
Click to expand...
Click to collapse
Any solution for above? Thanks

Use the Full-Specs of Navipanel with different Navisoft than CoPilot
Isn't there a possibility to make make the Navipanel understand, that the Navigation-Software is in a different Folder? I can't copy the Navisoft to the HD2, because there's no free space. I'm also interested in using the Navipanel with his full specs and with MN 7 or a different Navisoft...
Who can help?

Use the Full-Specs of Navipanel with different Navisoft than CoPilot
duplicate...

How can we auto-rotate HD2 while using iGO8 ? (I mean from potrait to landscape)

sirdil said:
Isn't there a possibility to make make the Navipanel understand, that the Navigation-Software is in a different Folder? I can't copy the Navisoft to the HD2, because there's no free space. I'm also interested in using the Navipanel with his full specs and with MN 7 or a different Navisoft...
Who can help?
Click to expand...
Click to collapse
I too would also like to know if it is possible. I currently have tomtom on my storage card rather than the phone itself, isn't there a ways to make navipanel run tomtom off the storage card instead of having to copy everything over to the copilot folder on the phone (or other navisoft)? I have tried creating shortcuts to a renamed copilot.exe and splashscreen.exe but it doesn't seem to like that.

My version of copilot wont let me edit the files on the phone as i don't have permission!!!!! is there a way round this as i want to use igo not copilot

Is it possible to start the Navi Panel automatically when connected to the car charger?

Bugger... I had TomTom installed on the device; doesn't work then! *Uninstall & reinstall to SD card...* :-(

Setting footprints on tom tom 7

I know it may sound stupid, but I can't figure out how to do it, and I already searched the forums with no luck.
My question is simple: how to set Footprints to launch and use TomTom 7 instead of the demo of Copilot on my HTC HD2.
Thanks.

I have the same question but in my case it s about igo. I would like to use footprints with my igo.. I am searching for an answer, too. If I find something I will write here. All the best.

I followed the instructions below on another thread, and they work fine in that footpriints now launches TomTom, but it does not plan a route to the footprint. Does anyone have a way of making TomTom navigate to the footprint? From what I have read, a .dll file is required for this. I'd love to get this working.
To make TomTom replace copilot:
-You have to install tomtom to your SD card
-Locate the install dir of tomtom after you have installed it
-Locate the navigator.exe and copy it to another folder
-Rename the navigator.exe in the tomtom folder to copilot.exe
-Rename the navigator.exe you made copy off to splashscreen.exe
-Copy the splashscreen.exe back to same folder as the new copilot.exe is
-Rename the tomtom folder (or what ever the name is) to copilot.
-Copy the new copilot folder, and then locate the original copilot folder on device storage (Program Files/CoPilot) and paste the new folder over the original (DO NOT DELETE THE ORIGINAL FOLDER FIRST)
-Soft reset, and it should work just fine

bumping as a solution would be nice!
Don't like using CoPilot so i would rather be using TomTom.

Changing a link in the registry should be an easier solution...

if i understood wright ,you have at the end to copy the entire eg igo (544mb)folder from storage card to device memory? how will this device work then whithout memory ??
i may be wrong ?

search forim pls, there is some solution linked with navipanel! dunno about the footprint how to adress the coordinates but can be made to start igo8 or tomtom. just search

karaern said:
search forim pls, there is some solution linked with navipanel! dunno about the footprint how to adress the coordinates but can be made to start igo8 or tomtom. just search
Click to expand...
Click to collapse
Routing any GPS to be opened by Navipanel is one thing THEY are asking for something a step further on how to execute a command so it starts routing to a footprint. So far I haven't seen anyone do this.

How to make Navipanel fully works with TomTom Navigator

Hi, all:
I uses Dutty's ROM and TomTom navigator 7.9. I did the below to make the navipanel work on TomTom, but it doesn't work well after I used the below method:
To make TomTom replace copilot:
-You have to install tomtom to your SD card
-Locate the install dir of tomtom after you have installed it
-Locate the navigator.exe and copy it to another folder
-Rename the navigator.exe in the tomtom folder to copilot.exe
-Rename the navigator.exe you made copy off to splashscreen.exe
-Copy the splashscreen.exe back to same folder as the new copilot.exe is
-Rename the tomtom folder (or what ever the name is) to copilot.
-Copy the new copilot folder, and then locate the original copilot folder on device storage (Program Files/CoPilot) and paste the new folder over the original (DO NOT DELETE THE ORIGINAL FOLDER FIRST)
-Soft reset
However, However, the "Go Home, Address, Recent" don't work. Instead, presse any icon on Navipanel, TomTom will starts. I wonder if anyone could make Navipanel fully works with TomTom?? Thanks in advance.

it doesn't necessarily have to be tom tom right?? could i use your little tutorial and make it work with google maps?? or waze?? or bing?? those are my preferred gps programs.. and they work phenomanal... especially google maps.. since i can visually track my friends progress to our destination...

mantis123 said:
However, However, the "Go Home, Address, Recent" don't work. Instead, presse any icon on Navipanel, TomTom will starts. I wonder if anyone could make Navipanel fully works with TomTom?? Thanks in advance.
Click to expand...
Click to collapse
Fully support that question Is there any honorable developer out who could modify NaviPanel.exe to send the right command line syntax to TomTom Navigator.exe?

If TomTom supports command line parameters at all .....
For Garmin Mobile XT it is possible via SDK or QueLaunchApp.
Edit: I just tested this. Navipanel.exe does not use command line to pass data to Copilot. Sorry folks.

livanov said:
If TomTom supports command line parameters at all .....
[...]
Edit: I just tested this. Navipanel.exe does not use command line to pass data to Copilot. Sorry folks.
Click to expand...
Click to collapse
So... may could you tell us how NaviPanel.exe does execute CoPilot with special functions if it is not done by parameters?

extrapurifier said:
So... may could you tell us how NaviPanel.exe does execute CoPilot with special functions if it is not done by parameters?
Click to expand...
Click to collapse
Nope. No command line parameters. I logged splashscreen.exe and copilot.exe.
I guess they use some kind of API (similar to Automation) or something ?!?
Or Post Message function. Not sure ....

livanov said:
Nope. No command line parameters. I logged splashscreen.exe and copilot.exe.
I guess they use some kind of API (similar to Automation) or something ?!?
Or Post Message function. Not sure ....
Click to expand...
Click to collapse
damn. i would really like it if navipanel could be used with other navigation programs, would need it for my future motorcycle

What to do if I have no copilot installed. Can I still link navipanel to tomtom?

[REQ] Motonav / IGO8 on HD2

so I have been using IGO8 on WM for ages. works fine.
I now have Android running on my HD2. I read that MOTONAV is the Android equivalent of IGO8. Apparantly same directory and subdirectory structure. I have the Motonav APK but cant get it to work.
I renamed the subdirectory 'IGO8' to 'MOTONAV', ran Android and ran Motonav, but it gets stuck on installation.
Anyone know what other changes are required?

When I got motonav, it came with the apk and a Motonav folder. I manually dragged the map files from my existing IGO8's IGO8 folder to the corresponding directory in the motonav folder. I left the contents of the motonav folder, just substituting maps and voices for my region's.
IGO makes motonav, that is why they both use .fbl map files. People use motonav on the hd2 because it supports the 480x800 resolution.
One last thing. When I first installed Motonav, the installation crashed and I had to hit the red reset button beneath the battery cover. On reboot, It worked fine.
GL

u should have a folder named Motonav. in that folder u should have two more folders named: Content and License.
just install the apk. transfer all of ur old files and license and run as normal.

actually motonav is way lower than igo8 on wm... It shares same maps than igo, that's all. Screen navigation is fine but there is no parameter to configure and we can't set an trip with several checkpoints. Very basic, just set a destination from the place we are. It is the best gps under android so I am a bit disappointed.