Related
Hello All,
I don't know what is the problem. It seems ok for the first time after i installed the version 4.0 that comes with the CD. It works fine. But for the second time, it just 'connecting'. Have gone thru' the troubleshooting processes but without success. Also tried to install the new version 4.1 but won't work.
Pls can someone help me on this.
rgds.
zainal.
does it sync over BT?
i had the same problem before & i still do, but soem other guy here in the forum said it worked for him when he uninstalled AS then reinstalled it again.
try it, it might work with you.
until now i'm still stuck with BT syncing, i cannot sync over USB.
i still get "connecting" message all the time with no progress.
Hi Guys
I had EXACTLY the same problem, alhough I could not get BT to work but could get IRDA to work.
Here is what I THINK the problem is, by the way i-mate were useless it was a colleague at work that had finally found this problem on his device.
WM5 devices when connecting via USB create a NETWORK. Strange but true.
SO, open Control panels, open Network Connections.
Attach your K-JAM (or other WM5 device) you SHOULD see a new network get created with a random number at the end of it (the number changes depending on the USB port you use so you MAY need to do this procedure again if you connect via a different USB port).
Get the properties of this new network when it opens you should see that NONE of the services are checked.
Check them all.
Close.
Everything SHOULD suddently spring into action, it certainly did for me.
It appears that some PC config's (all our work ones) need to be configured this way were as otheres set themselves up fine.
Let me know if this works.
Cheers.
Robin
the wierest thing just happened.
i wanted to try your solution, i opened the network connections folder, connected my kjam, and for my surprise it just connected without me doing anything, and i had it sycronised over the USB.
BUT, the wierd thing, is even though i have the connection, and it is syncronizing with my laptop, i don't have the connection icon on my kjam, instead i had this message (attached).
what does this mean?
Don't know, I have never seen this!!!!
Robin
the strange things keeps coming...
when i wanted to sync my device again this evening, my whole laptop freezes without any responce.
can someone here tell me what's the problem i'm having here? & how to solve it?
i don't wonna format my PC over this.
thanks all in advance.
I have noticed that the synchronisation only happens properly if I connect to the SAME usb port. If I connect to another port, the laptop picks up the connection but won't synchronise.
Connect to the same USB port and voila!!
Hope that helps.
See my reply earlier.
Each different USB port you connect too AS creates a NEW network with a different number on the end of it.
You have to open the network properties for all the networks (with numbers) you intend suing and make sure all the properties are checked.
I use 3 different USB ports on my laptop depending on wether it is docked at home the office or undocked.
I have had to do this procedure for each port but now they ALL work smoothly every time.
Regards.
Robin
i did connect it to the same USB port, but no luck there, the same problem. i uninstalled the AS twice and re-installed it but it's the same.
hi.
i have tried yr solution by ticking all the boxes in the 'new' network properties. won't work though. the sync. icon shows 'connecting'.
mzk78 said:
hi.
i have tried yr solution by ticking all the boxes in the 'new' network properties. won't work though. the sync. icon shows 'connecting'.
Click to expand...
Click to collapse
Strange.
I know a number of people this worked for.
You could/should also try disabling your firewall and giving it another go.
Robin
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
danrw84 said:
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Does wifi turn on? (Does the left LED blink like it does when wifi is turned on?)
If not, then it could be related to a cingular cab - did you install any of the cabs from the original cingular extended rom?
left led does blink.
ive also gotten as far as picking up a network.
i have tried everything, i cannot get my wifi to work at all. i dont know whats up.
the settings i needed (which i replicated for the new rom) on the old rom, was this
I would select networks, MY work network, this connects to the internet.
then in the WLAN adapter i had to manual enter my dns servers.
thats pretty much it to get it to work, but now with this rom it wont
Similar or different problem? Not sure. PARTLY SOLVED!
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Hi NG,
I updated my O2 XDA mini s (German) from OS 1.3.4.2 to 2.16.9.1. (Radio 02.07.10 included). To be honest, I was never really happy with the quality and reliabilty of the radio. 4 out of 5 times it did work, but once in a while, especially while roaming, it gave me a headache. After unlocking and updating to the new version, WLAN looks to be working quite well, at least for connecting to access points, but it seems that it can't browse external websites. VXutils give back a socket error trying to access external (outside my home network) websites/Email.
Internal (inside my home network) connections work like a charm. Termincal Services client accesses my Win2003 Server no problem and I can also connect to a website hosted on my internal server. (http://servername:port).
Whenever I try to connect to external sources, the browser stops afer not successfully "locating" the respective server. On the other hand locating might not be the problem. Performing a ping to an external site with VXutils properly picks up the right ip address but cannot send/receive ping!
GPRS works as supposed. Can connect to sites with no problem.
May be somebody experiences the same problem or, even better, has a solution.
By the way I used @Work for all possible settings. The work profile is set up for both connection types.
Besides that, the new rom is really nice
EDIT Well after some time playing around, I have solved the problem or better the problem partly disapeared. In 'Settings' 'Network Adapters' I switched from Use server-assigned IP address to manual and entered IP, DNS, Gateway, etc. With these settings it everything worked after a soft-reset. Going back to DHCP and soft-reset, it first worked an now it doesn't anymore. At least there is a work around and I'm trying now some other things. All machines currently work with the DHCP settings correct. I will check and keep you updated if the problems comes from Server settings or from something in the PDA EDIT
Lars
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.[/quote]
Darn it. I did. I'll re-wipe and not load the 54g upgrade. Thx.
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
no i didnt load anything
but i want this wifi to work! what the heck!!
try this
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
Danrw. Concerning the registry settings, after patching the os I did change the registry settings. One already existed with the right value as shown in the 802.11g thread. The other one, DotG, I added.
After that, it did pick up a only G router!
As far as setting DNS manually. It is not enough to just cange the dns setting. You have to enter all the information and even after a soft-reset it takes some time to have the settings picked up... Use vxUTIL 'Info'-Screen to check the current settings. I did test wlan before and after applying packages from the extended rom. No change on reliability or performance on WLAN IMHO.
As far as I understand. Your problem is actually connecting to the router/Access Point. For testing please disable all security on your router and do a soft-reset before trying to access. Also since we have heard of several problems with model 9100 not realizing if an access point is available or not. Also change the SSID of your router and if possible the MAC Address of the router.
Don't forget to soft-reset and first try SDIO Adapter inyour pda with auto IP/DNS/etc. settings.
Another thought. Embarassing, but once I messed around with trying to get a new pda online and forgot to disable the mac filter settings in the router, which resulted in being able to see the active router but it didn't let me connect. After those two days I was missing a lot of hair.
Good luck
Lars
summiter said:
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
Click to expand...
Click to collapse
I did but only the minimum. I trimmed down their install to the basics. I narrowed it down to one of two CABs. Either the gprsstall or EnableEONS. I didn't install either of those and I"m now back up and running. Of course, I still can't get it to prefer WiFi to EDGE.
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
eb said:
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
Click to expand...
Click to collapse
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks[/quote]
I do not know if my solution will work for you because I upgraded my rom to 2.16 but lets give it a try. I use d-link DI-524 wifi router. Start menu > Settings > Connections (tab) > Network Cards [I must admit earlier today when I was trying to connect my k-jam to the wifi, I did get as far as it asking me for my authentication code and afterwards it timed-out] --> select your wifi network [at this moment as I'm trying this out my wifi on my k-jam is off] --> Network Key (tab) > it was the key index that I had to change from 1 to 2. Before doing this though, go to your router's wireless configuration page through your webbrowser and make sure the keyX (it looks for d-link this can be from key1 to key4 or at least on mine) and make sure the key index you select on your mda is the same number that is used on your router for code authentication.
Also I noticed after resetting my k-jam that I could get connected to my wifi but I could not surf, in wifi setting on my k-jam I had to hit renew ip and then I was able to surf.
I hope this works for you. Good luck and many late nights.
no luck with this for me
even tried removing wep all together. tried multiple routers.
i can detect the ssid's, but i cant connect to them. times out on the connect.
Mine worked no problem...you may already have had this suggestion but here was my process.
Unlocked with lokwiz
Upgraded
Reset before extended ROM apps installed
Installed total commander
deleted extended ROM
Upgraded again
i re-installed the CINGULAR ROM and WiFi works like a charm
......any clues?
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
kristiandg said:
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
Click to expand...
Click to collapse
What does timestyle and wifirate4 do? I don't have these installed and haven't seen any problems.
Hi all!
I have an HTC Prophet, which it appears that it cannot detect any Wifi networks at all. I know that it could do so in the past (autodetect etc). After a point of time this was not working but I though that it was simply some mess up with the configuration.
After, however, having gone through a ROM upgrade and still not seeing any Wifi The little icon appears, it seems to search but nothing is found. I wonder what could be wrong? Since the Prophet has taken a few drops I was wondering whether the wifi card (SDIO) or the antenna - if any - has some kind of problem. Is there anyway to check this (e.g. device manager, open-up the prophet etc)?
What else could the source of the problem be?
Thank you very much in advance!
Same problem here... and it has definitly not dropped.....
Same problem here... would be nice to find any solution...
Same problem here with a Prophet G4 with:
IPL: 2.21.0001
SPL: 2.21.0001
Radio ROM: 02.69.21
OS ROM: WM6 PDAVIET 1.1 8mb pool (10.2.0.8)
Tried with different roms, radio roms, etc... So many hard resets after all. No solution. Wifis aren't detected.
Actually with PDAVIET 4.0.0.4 (8mb pool). Nothing changes. Wifi not detecting anything. Sometimes i got "bluetooth hardware error" message...
Make sure the security of your router is set of. Connect your ppc with your router. If you go to your ppc wifi setting you will noticed your Mac Adress. Enter you mac Adress to your router security list. Enable your router security.
MDA_newbie said:
Make sure the security of your router is set of. Connect your ppc with your router. If you go to your ppc wifi setting you will noticed your Mac Adress. Enter you mac Adress to your router security list. Enable your router security.
Click to expand...
Click to collapse
Thanks but that's not the problem. My HP6815 detects wireless networks everywhere. (also at home and at work). Both works without mac filtering or such other security measures.
This is so rare and I am going to create a new Thread because It can be impossible that i'm the only person with this problem in the world.
Evans_Prophet said:
Hi all!
I have an HTC Prophet, which it appears that it cannot detect any Wifi networks at all. I know that it could do so in the past (autodetect etc). After a point of time this was not working but I though that it was simply some mess up with the configuration.
After, however, having gone through a ROM upgrade and still not seeing any Wifi The little icon appears, it seems to search but nothing is found. I wonder what could be wrong? Since the Prophet has taken a few drops I was wondering whether the wifi card (SDIO) or the antenna - if any - has some kind of problem. Is there anyway to check this (e.g. device manager, open-up the prophet etc)?
What else could the source of the problem be?
Thank you very much in advance!
Click to expand...
Click to collapse
My XDA never have been droped. No hits, nothing. it has only 1 month of life. And doesn't work. So forgot a HW a problem (at least, created by YOU. Another question is a random hw failure)
Also, i'm wondering WHY i have "Wi-Fi" and "Wireless LAN" icons on Settings/Connections, if both shows similar information (in different ordered tabs).
I've tried 5 different GSM rom versions. (from 2.07 to last 2.69) from 2.47/61 (i'm not sure) i 've that two icons. In early versions, only "Wireless LAN".
Has anybody this TWO icons??
Do i have to do something special to make the wifi work?
Why my prophet can enable Bluetooth and wifi at the same time?
For example, after a soft reset, i can enable Wifi. (but doesnt detect nothing, of course). In that point, i CANT enable bluetooth in CommManager. I tap on the icon, but it reverts to disabled.
i'm frustrated
wifi not working
I have the same problem. Yes I too have the same icons, and I have also tried different roms. I have also tried wififofum, but that didn't work either. If anyone have a solution, please be kind and tell us.
If this is posted to the wrong place please forgive, I am working on an NDIS intermediate miniport driver on WM5/6. Our driver works on all CE platforms ( and all other windows platforms ) and installs and works on WM5 and 6 *EXCEPT* form some strange behavior around WLAN connections.
When we are installed w/ a WLAN, when the machine powers up, or soft boots, or suspend/resumes, the default SSID attempts to connect. Instead of auto-connecting, the 'tower icon' never connects, instead eventually a second 'tower icon' comes up and I get two 'tower' icons connecting. Neither ever connect.
If I manually go into 'network cards' and press 'connect', the SSID will connect and authenticate, and the network works, and the IM works and sees all traffic.
Micro$hit refuses to support anything, and HTC is no better.
If you guys are smart enough the reverse engineer the entire OS, does anyone have any idea what is going on here? Any ideas would be great.
What about an alternative comm manager that would work around this? I wrote a wzc application to try and duplicate the behavior when I manually press connect in comm manager, but it just seems to replicate the 'auto connect' behavior w/ two 'tower icons'
Does anyone know what is happening?
Does anyone have an application that can work around this?
Can anyone write an application for $$$$ to work around this?
Help me please
-Seth
How works Your application which duplicate comm manager behavior?
Did You try functions in ossvcs.dll?
I did not write my own comm manager, this is the standard comm manager, I am relying on the default WM6 one.
I wrote an app using the WZC calls based on WZCTOOL in the CE6 sdk, and when I put the key, and enc type in it will successfully connect to the access point. With my IM installed, however, this WZC app will re-produce the problem described before exactly. Somehow the default windows comm manager can still successfully connect manually... how does it do this, what calls does it use, I need to know how. Can anyone write this? The code in wzctool will not do it ( I don't think, possibly I have bone stuck in my head ).
I don't know ossvcs, please elaborate on how/what functions I might be interested in.
As an aside, does anyone want to try our shim on one of your custom kernels. I am necessarily running on a standard WM6 kernel, if someone would test and see if this problem exists on custom kernels that would be swell. I cannot modify the kernel on this one and only device I have.
Here is the good description for functions in osvcss.dll
http://www.teksoftco.com/articles/article 007/radiodevices.htm
HTH
I tried out the ossvcs sample application, and it caused the same behavior I see with the WZC stuff or when trying to 'auto connect' after a reset. That is, the access point never connects. Manually I can still connect by going into comm mgr, editing the access point, pressing cancel, then connect, and instant connection. What api call is this app using at that point?
It's verry strange behavior.
One tip from other side - did You try call SetDevicePower fo Wifi Driver and intermediate driver?
no special handling
I will look into SetDevicePoPower, but I think NDIS should be handling power events... Any further info on SetDevicePoPower or anything else would be great.
Oh yeah, in case I didn't say so before, you guys *ROCK*! Keep up the good work, and if I ever solve this problem I will be sure to 'let on'.
Does anyone out there in the wide world have an Ndis Intermeidate Miniport driver akin to PASSTHRU working for 802.11xxx on a TyTn ( WM5 or 6 )?
Yes NDIS handling power events, but by using api setdevicepower You can explicitly on/off wifi connection
Please try to write small apllication which turn wifi on and off.
CEDEVICE_POWER_STATECEDEVICE_POWER_STATE devState = D4; //Full power - constant D0 represents NO power state (OFF)
DevicePowerNotify("<WifiAdapeterName> (qualified - example {8DD679CE-8AB4-43c8-A14A-EA4963FAA715}\xxx1:", devState, POWER_NAME);
SetDevicePower("<WifiAdapeterName> (qualified - example {8DD679CE-8AB4-43c8-A14A-EA4963FAA715}\xxx1:", POWER_NAME, devState);
But Maybe You have still problem if wifi driver is not loaded until comm mgr button is pressed...
.
WiFiFoFum
I just tried the WiFiFoFum application that allows one to power on and off the devices. Is this using the same API? WiFiFoFum did not work, I tried powering on and off my device and the real device in different orders, and it does not work.
I will try you API now...
not smart enough
I don't know enough to understand your example. Where do I get the correct GUIDs from? I assume the xxx1, is the device name instantiation.
What about 'devName' and POWER_NAME. Sorry, bone still stuck in head, ughh.
Guid is typically found on this place
\\\registry\HKLM\System\CurrentControlSet\Control\Power\State\Suspend\
Value is
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\
Device name can be found on registry key HKLM/COMM.
Also device name is displayed in wififoforum.
POWER_NAME is constant - see MSDN.
hey there guys new one here just signed up not long a go i my sell got the htc hd2 from t-mobile seems pertty good but i got a little issue
Cannot connect with current connection settings to change your current connection settings tap settings
I’m running Windows xp home with a Dlink EBR 2310 Router.
I’ve forwarded port 3389
I have tried the local Ip-adress and my computer Ip-adress, and I have allow connection for remote desktop.
What am I doing wrong???
Any help would be greatly appreciated.
hum ok then i know same thing every forum you go to newbie thing well i used Google and the search bar
are you trying to connect while on the same network (i.e. you're at home on your phone where your computer, and router are)?
or are you trying to connect while at another wi-fi location? (away from the location where your computer is)?
at home please note remote desktop is new with me but however i found tutorials at pocketpc i know computers pretty well but this has me stumped....
what would it have to do with the net work? I should be able to connect to my pc even if i was down the street also my computer is not running off WiFi or a wireless router.
I'm no expert by any means, but I managed to connect to remote desktop by using this:
Computer: (use your computers IP address, not your routers)
User: (should be the same as your normal sign in)
Password: (self explanitory)
Domain: (Leave blank)
This worked for me, but I am on the same network as my computer.. I DON'T know how to log in from another wi-fi point.
Izod2010, let me know if this works (on your home network)
If somebody knows how to get remote desktop from an outside Wi-Fi point, please let me (us) know.
Cannot connect with current connection settings to change your current connection settings tap settings
so that's a no it didn't work with My IP or local IP
do you have the Wi-Fi on you phone turned on? I tried to connect without turning on my phones Wi-Fi the first time.
Once I turned it on.. it went without any issues.
nope still same message♠
should i use the router login?
check these out:
http://www.ehow.com/how_5232336_use-remote-desktop-mobile.html
step 2 might fix it.
or check out youtube...
http://www.youtube.com/watch?v=iCs4GQma7IQ
(I didn't mess with my router like he said.. It didn't have those setting available to me)
yea no matter what i do it dont work i guess its either phone side or my pc not sure whats wrong.
oh, btw. what operating system are you running? I think you have to have XP professional or newer to run RDT... and like the one website said (that I linked to).. I believe that you need to go into it (on your computer) and allow RDT accessability from outside computers.
other than that, I have no idea.
finally got this working...
upsetting that i can't turn it off/on.. but still bad ass regardless
ProjektFuze said:
upsetting that i can't turn it off/on..
Click to expand...
Click to collapse
What do you mean? What can't you turn on/off?
For Remote Desktop you must have XP Pro. XP Home and all other "Home" Windows do not come with the Remote Desktop Server. They do come with the Remote Desktop Client (RDC) so you can connect from the "Home" PC to some other "Pro" system. But you cannot use Remote Desktop Client (RDC) from anything to cennect to a "Home" Windows System. For a "Pro" system, right click on "My Computer", select "Properties" and then select the "Remote" tab to turn on Remote Desktop Server.
I realize this thread is old and technically solved...However I just experienced this same error message and after searching and not finding an answer wanted to post what solved mine for the next person like me.
STUPID...but I just flashed a new ROM and couldn't get signed into RDM--My Data Connection was turned off by default on the new ROM. I didn't realize this until after getting extremely frustrated.
Hope it helps someone in the future
Did you get this to work?
Hello,
could you ever get this to work out??
It was working fine on my touchpro 2, and I used it almost everyday with no problem.
ever since I got my HD2, it NEVER worked, and I tried every way possible. Every time I asked I was told to do the steps mentioned in your post replies and they told me you're a newbie maybe you can't figure it out, Ive been using windows mobile for nearly 10 years now, and I used remote desktop since it was first launched!! and it worked perfect every time.
There is a problem that I can't figure out, Im a computer software engineer and Ive been trying EVERYTHING possible. Something is missing, and wm experts and neglecting this, thinking that we're newbies and just can't figure it out.
Can someone tell me how i can get a small navigation window in remote desktop ? Watch this vide http://www.youtube.com/watch?v=QFiDZ_wBAtM&feature=channel PLS help
You need Pro version of windows XP-vista or Windows 7 to use Remote desktop
I have Windows 7 Ultimate... but i ask about small window in PPC (Touch Pro 2) which let me navigate after zoom in.