Ran into a problem with my vzw htc vogue (xv6900). Did a soft reset
and when it booted back up it hangs at the vzw flash screen. Its out
of warranty and verizon was no help. I've searched all over and can't
find any information to help diagnose.
Text that usually shows during boot has changed.
It used to read:
M 03
B 05
P ACAAAAM-4070
R 1.60.30
D 1.15
Now it reads:
M 03
B 01
R None
D 1.15
Does this mean the phone is bricked or is there
anything that I can try to repair it? Relative noob when it comes to
cellphones, but I've got some limited electronics experience, so I'm
willing to try anything.
thanks
You have no radio so it won't boot, somehow the radio code got corrupted.
I would try installing the complete bell rom and see if that help... (but *do not* run customizations, soft reset as soon as it says anything about customizing! as it'll turn your phone into a bell phone)
Then flash to the latest nfsfan and let it customize.
That makes sense.
Any suggestions on a good guide for the basics of flashing a rom?
And where would I track down the bell rom?
Oh, and what's an nfsfan?
I guess I'm more of a complete noob ;-)
go to
ppcgeeks.com
http://forum.ppcgeeks.com/showthread.php?t=19071
it shows all the stock rom links.
i would click bell, update radio. *search stuck in bootloader mode, there should be a thread made by me. the answer and links are provided*, or just reunlock, flash radio, and put custom rom
-nfsfan is a user overhere and ppcgeeks.com, he makes roms which are very popular and stable. iwould recommend using his roms, seeing as they are pretty good.
Related
Hello Everybody,
Let me start off by saying that this is the worst phone I've ever used. I had great expectations from this phone but never mind - I'm going to stick to my Excalibur.
This is the first time in my life that i actually bricked a phone. I installed a couple of cooked ROMs and everything went fine. I have experience with CID Unlocking and flashing ROMs. Anyways, all I did was try to flash back to the original Rogers ROM from the Original Shipped ROMS thread and that's when my phone got bricked.
I have searched and done everything possible so far and NOTHING WORKS!
So far I've done this:
1) I have tried flashing the Chinese ROM/Dopod WWE Asia ROM as their official HTC ROM's.
2) Done a hard reset
3) Loads into Boot Loader and the boot loader version is
IPL - 2.21.0002
SPL - 2.21.0000
4) Ran MTTY and i got gsecuritylevel=FF (which means install shipped ROM)
5) Tried running USPL but no luck
6) Tried installing Rogers ROM from the original shipped ROMS thread, still no luck as it gets to 3% and reboots
I seriously don't know what else to do. This is just ANNOYING!! Ive been sitting here for the past 4-5 hours trying to get this damn thing to work.
Is there a way to downgrade the SPL so I could flash a ROM?
Is there a free permanent CID Unock available?
Is there ANY WAY out there to unbrick a Rogers HTC TOUCH
(DAMN ROGERS !!!)
Finally, I'm trying the SD Card ROM Update method and hoping it works.
Mods, if you see this and know of a way to help me out, please do or anyone else who knows what to do so my life is back to normal, please help. Thanks in advance.
EDIT: Ok, I tried the SD Card method, it says Checking SD Card Contents and nothing happened, all i see is a tri color screen. The SD Card is 2 GB, is the only file present on the card and it was renamed accordingly (the .nbh file).
Please help as I'm going nuts trying to fix this.
Best Regards,
lukybandit
Anyone at all?
I've done all the searching I could and everything I've tried so far has failed on me.
I can get into the bootloader, get into the hard reset and even can run a mtty session and no matter what I do, it gets stuck at the HTC logo.
In addition to this, all ROM's that I have tried so far keep getting the Error 270 (Obviously due to not being able to even temporarily CID unlocking it).
I did notice a lot of people have bricked their devices and I figure if i can get into the boot loader screen then at least SOMETHING can be done.
Here is what i have learned.
I have the Rogers Touch, and i said SCREW IT, and going to pick up an AT&T Tilt.. I already have 2 S621's, 1 Tytn 2, and i need another phone for my dad.
I had the touch for 1 week and had the same problem as you. Here is what i gather.
1. YOU CANNOT - install the original ROM if you flashed the incorrect ROM
2. Because there is no HARD SPL, i used the USPL, which on reset will result in a CID relock.
3. In this condition, the only way to reflash if you can't get back into the regular today screen is a custom SPL, by Olipro or something.
But Olipro (i keep forgetting his name), charges 75 GBP which equates to $160CDN or so. I bought my HTC Touch used for $200CDN. Makes no sense to fix it. So i am going to try and sell this phone to someone who wants to fix it for cheap.
Sorry man, i looked EVERYWHERE for a fix, and there was NONE to be found, unless you use this guy , who has succesfully fixed everyone elses phone.
Honestly, if my phone was worth alot more than $200, i would pay him with no issue, but because the fix is the same as buying the same phone again, it makes no sense.
Are you serious?!!!
So there's no way for me to fix this piece of ****? frig man.
I paid for this and now I can't fix it?
Can Rogers find out that I tried playing around with the phone or not? I hope not because It's been only 3 days since I got this and it's been barely used.
If there's a fix, please let me know.
That's not even worth it. If there's someone out there that can fix it, please help - Thanks
P.S: Thanks for your response.
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
http://forum.xda-developers.com/showthread.php?t=347700
treid that?
Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
Yes, I think I did do a hard reset but I will try again in 5 mins. It was a bad flash cause it stopped in the middle I think.
Yup Both SD Card & SIM Card Removed.
Im guessing the only way I could fix this would be - get the original shipped ROM but so far I was only able to find a dump and not an actual update installer.
My SPL & USPL is 2.21 - So what do you recommend. upgrading the SPL and then trying to re-flash..
Would the TMobile ROM work because my phones Rogers branded and no Canada does not have the Vogue.
In answer to your question, it doesn`t go more than 2-3 % and then gives me an Update Error (270)
ahhh...this is driving me insane.
Thanks so much for the help so far. Really hope you guys can help me out here.
The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.
Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
I just performed a hard reset and tried reflashing but still no luck. It gets to 3% then reboots.
In regards to what you attached, how do I go about doing it? Let me know. I downloaded the 2.26 SPL and the NL ROM.
Noonski said:
The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.
Click to expand...
Click to collapse
Original SPL being Rogers (Can't find it anywhere except a dump)?
k I'll try flashing the SPL 1.11
- Any other thoughts, bro? Thanks!
Did u tried SD card flashing??
Yeah, I did.
I tried the .nbh from the Rogers Dump and it says Invalid Certificate. I tried this other .nbh which said Dead_Elfin, still no luck and the Dopod Asia
I'm so mad/upset and I've tried so many methods to fix it. Is there no way I can get the Rogers dump to work in any way?
Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!
kokotas said:
Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!
Click to expand...
Click to collapse
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.
lukybandit said:
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.
Click to expand...
Click to collapse
EDIT: Didn't work, updates to 3% then reboots. Just Great !!! This is so annoying.
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
yeah, i meant the dumped Roger's ROM.
This is the most annoying thing I've ever had to deal with in terms of owning all my phones. I am selling this phone or returning it back the moment I fix it.
And I'd threaten but he hasn't done anything lol
I hope he does help me out.
Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
i think its time we make it clear to everybody that XDA means SHARING to help everyone out and not to ask for money in return for something. XDA should only be for those ppl who can work hard for everyone without asking for money.
This phone was the biggest mistake I ever made in my life. I'm sick and tired of this already and I still haven't been able to get it fixed.
LukyBandit
I tried everything that these guys told you to do, NOTHING WORKS.
We have an operator branded device and do not have an ORIGINAL ROM to load in other than a DUMP.
Thats why we are stuck.
I am looking for someone local GTA that might charge less, but yes your TOUCH is fukked unless you are willing to pay OLIPRO $160CDN to fix a phone thats worth $200ish.
I am buying a TILT today, its not worth the stupid touch to fix.
What a waste of money that was. I am so happy my TYTN2 and my soon to purchase TILT has a HARD SPL to it.
Hi Guys i need some help.
I wanted to try out the new Bell UI wich is pretty cool but no functional for my self. So i have tried numerous time to go back to the stock Telus ROM but my phone keeps freezing and go load the ROM. I am using the upgrade utility from juicy's page and the Telus stock ROM he has posted. It will go as far as showinf the status bar and then there is an error. The loader wants you to go through recovery mode but my phone is stuck and i need to pull the battery and it just boots like normal. This happened as well when i flashed to juicy's rom.Any help would be awesome.
There are questions... does your phone change to the 3 colour boot screen?
If yes then you get the error... maybe you flashed back to the telus locked pcl and are actually flashing a custom rom built off of the telus oem package?
If it is the original telus rom it should flash without issue using either original pcl or unlocked pcl. Maybe you should reflash the unlocked pcl then flash the telus rom... then flash the pcl back to stock.
I have check to make sure it it unlocked. I just ran the upgrade utility right now to make sure it was unlocked. I get the three color screen it says security unlocked. So when i go to upgrade it to the telus stock ROM which i downloaded from juicy's page it will load through the three color screen and show the status bar at 0% and the the upgrade utility goes into recovery mode. I take the battery out and it starts up like nothing has happen. I dont know what to do any more with this thing
If the rom you have is indeed the stock telus rom... then try flashing back the locked ipl then do the rom upgrade... what I was getting at before was maybe the ipl rom is corrupt.
Hi thanks for you help. I have just tried re locking the phone with the diamond re locker from juciy's page . It said everything was fine and then i tried to upgrade to the telus stock rom and it did the same thing. when you say "flashing back the locked ipl" what does that mean. Sorry ...... did what it said on pocket PC geeks to lock the phone again. thanks in advance
You covered the bases, and it doesn't sound too good... the fact that you were able to reflash the relocked ipl and it still failed is hard to understand why it won't flash the os itself, could be a comm error with the usb? Do you have another machine you can try the flash on... guys like juicy or other c4rbon members could probably help with some insturction on pushing the rom via a terminal session with the phone but I'm not sure.
use again Unsigned-Hard-SPL-Diamond-OliNex, and after try the stock rom, i had the same problem with htc stock rom, hope it will work for you to.
Hi
I have tried what you sudgest but when i run that one is will not even get to the loader three color screen ......just locks freezes the phone with the color wheel showing. dammmm i dont know what to do now arrrrgggg!!!!!
While not a tech noob, I've never done anything with this particular device other than the official rom upgrades. It's not been flashed with any cooked roms or modified in any way. It's an unlocked device originally from the UK, so NOT the TMobile HD2. Always worked fine until yesterday, when it froze then rebooted itself, erasing all of my data. Then shutdown again and would not turn back on. Did a hard reset, which seemed to work fine and completed, but won't finish booting now - just stuck on HTC boot screen
R 2.06.51.07
G 15.30.50.07U
D 1.66.76641
Since it's an unlocked device purchased via website, I don't have the luxury of sending it back/trading it in for another device. Happy to try to fix it myself, but could use some guidance on what to do/where to start. Apologies for posting a topic already addressed here, but I'm looking for more detail re how to proceed exactly, if anyone can help, it would be greatly appreciated.
first step is grab the wwe 1.66 rom and flash it, and whilst doing so inspect the battery pins carefully.
also try the 3.14 rom, assuming the htc website lets you use your serial. if your serial gets refused then it's not your stock rom.
also, there's a good chance htc will honour the warranty for the price of shipping, so if the stock rom doesn't fix it, don't start messing with hspl, cos if stocks don't fix it cooked won't.
guys i m totally new so i have the some question and want the best answer so im sure that u will help
so what is role of radio in htc hd2 if i have install radio which is not compatible to the rom /custom rom so what will happen to my phone ? will it stuck or dead?
i have read many places that guys asked that their htc hd2 stuck on boot screen/splash screen so i want know that what is the exactly reason for this issue and i there any solution for this????
here another question if i have flashed the stock/officially rom to htc hd2 then what will happen will phone goes lock ?
i want to know answers and most imp question y htc hd2 stuck on boot/splash screen and what is the solution for this issue pplease help me
thank
Nore info needed:
What ROM ? (give us ROM name and OS type>WP7>WM6.5>Android or link to post or ROM file
What radio version ?
What hard SPL (HSPL) is installed ?
Boot screen will show radio, toggling to bootloader will show hard SPL version & if you installed ROM I expect you know what it was !
With above info you should get more & better accurate replies to assist your issue.
Well if you're making a child drive, what do think will happen?
Radio being. You're flashing incorrect drivers. And if the drivers are incorrect/totally incompatible, what do you think? The system can't correspond with the hardware, so what does the device become? Dead weight. A brick to hurt people with. A new mirror.
Rom is sort of the same thing. Depends on the rom however. e.g. stock or custom?
thanks for the help but i can not understand one thing why hd2 stuck on boot screen or splash screen if hd2 stuck on boot screen then there is solution for this issue??
If you can manually put it to tri-colour boot loader you could try flashing an original ROM package by using device serial to download ROM from HTC website.
If device boots correctly after flashing original ROM you can proceed to upgrade but do some more thread research first.
Without some information requested before it is hard to give specific scenario advice.
I bought my HD2 after having the Desire and I got hold of the network unlock key so was free to use any network. As i'm on Three I updated with a Generic ROM and all was fine for around a week and then I got the White Screen but a Soft Reset got me back running.
Now my ROM will load but the phone is so slow I dont know how to get it back to speed. Ive put the stock T Mobile ROM back on but this does not help.
What Can I do? I think after reading that it may be a radio issue but im not that clued up here so thought i'd ask at XDA whichg ive been using for years.
If I could send it to someone to get sorted out that would be easier and i'd cover the costs,m postage and the drink for dong it.
Any advice or takers please?
Regards
Jay
jayknight71 said:
I bought my HD2 after having the Desire and I got hold of the network unlock key so was free to use any network. As i'm on Three I updated with a Generic ROM and all was fine for around a week and then I got the White Screen but a Soft Reset got me back running.
Now my ROM will load but the phone is so slow I dont know how to get it back to speed. Ive put the stock T Mobile ROM back on but this does not help.
What Can I do? I think after reading that it may be a radio issue but im not that clued up here so thought i'd ask at XDA whichg ive been using for years.
If I could send it to someone to get sorted out that would be easier and i'd cover the costs,m postage and the drink for dong it.
Any advice or takers please?
Regards
Jay
Click to expand...
Click to collapse
The unlock key applies to the phone, not the ROM. So I would flash a new ROM. You don't mention if yours is US or Euro model, it makes a difference when flashing.
could the problem be 3.14 ROM on non 3.03 spl?
enter bootloader, what does it say on the spl line?
what version ROM is running?
samsamuel said:
could the problem be 3.14 ROM on non 3.03 spl?
enter bootloader, what does it say on the spl line?
what version ROM is running?
Click to expand...
Click to collapse
This is info on the boot screen
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPDL 0x30
Wheb
R 2 08. 50. 08--2
G 15.34.50.07U
D 3energy 8GU
My phone is a euro model and ive just flashed with an Engergy Leo21916.sense25.cookie.2.0.GTX.June01
Not sure what the radio is as included with the ROM
Please help. Ive tried all types of ROMS etc and im sure its just an issue of the wrong ROM & Radio.
Will install the ROM but will just loop on first install even if i reset throughout
Liuke I said before if I could send to someone to fix it I would be most grateful.
The stock rom would be fine but would prefer the unbranded if posssible
Many thanks
Jay Kay.
jayknight71 said:
This is info on the boot screen
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPDL 0x30
Wheb
R 2 08. 50. 08--2
G 15.34.50.07U
D 3energy 8GU
My phone is a euro model and ive just flashed with an Engergy Leo21916.sense25.cookie.2.0.GTX.June01
Not sure what the radio is as included with the ROM
Please help. Ive tried all types of ROMS etc and im sure its just an issue of the wrong ROM & Radio.
Will install the ROM but will just loop on first install even if i reset throughout
Liuke I said before if I could send to someone to fix it I would be most grateful.
The stock rom would be fine but would prefer the unbranded if posssible
Many thanks
Jay Kay.
Click to expand...
Click to collapse
NRG ROMS don't contain radios. You need to visit the first page, where they recommend radios.
I would suggest downloading the official ROM for your HD2 serial number from the HTC website. Then flash that from the SD card. This will put everything, including the radio, back on the device. Then you can go from there.
Many thanks for all the answers but their not helping unfortunately. I installed ther following a Laurentius26 ROM with the following radio 2.12.5.02_2 amd finally the phone booted up after a few hours and I could slowly make my way round the phone. To press the window key would take atleast 30 seconds top bring a response. I dont know what Is causing this and it seems like the wrong ROM & Radio is on as the phone used to fly on tjhe stock ROM.
Ive tried to reinstall the Tmobile ROM but it's just the same either way and any other ROM I try does the same.4
Is there anyway of cleaning off everything from the phone and starting again from scratch as it seems definantly that there is a conflict somewhere with the software.
I opened sys info on the phone when it was working and copied down the following just inase it helps.
OS Version 5.2.23148(23418.5.11)
Manilla Version 2.5.20212114.0
ROM Version 2.05 WWE
ROM Date 06/06/11
RADIO 2.12.5.02_2
Protocol Version 15.40.50.07U_2.12.5
Please HELP! Someone out there as i'm just about stuck and i've been playing with Smartphones since the first launch of the Orange Smartphone 10 years ago.
Many thanks in advance
Jay Kau
flash task29 THEN flash another custom ROM, this will ensure any leftover **** gets erased, you might have something in NAND carrying over from ROM to ROM, none of the current radios will slow your ROM down like you're describing.
It's either this or hardware.
also try the above with your sd card and sim removed, its not unknown for a faulty card to play havoc with performance.
I tried task 28 and it never let me press the volume down at 99% so dont know if worked. Still running slow but it is running.
Wouldnt of thought was a HW issue as it was working fine last week. If I need to return to HTC where would I do that in the UK after installing standard T Mobile ROM?
Many thanks and any further help going on Flash 28 and how to do it successfully?
Regards
Jay
sorry task 29 LOL
I attempted Task 29 but after my device went straight into loading a ROM. I thought that Task 29 removed all ROMS. Info etc so you had to reinstall. What am I doing wrong as I followed the instructions to the letter from one of the posts on this excellent site.
Am getting really annoyed now. Is there someone who could do this for me if i send and pay for return postage and a drink please?
Any further info and will try again tonight one more time
Many thanks
Jay
jayknight71 said:
I attempted Task 29 but after my device went straight into loading a ROM. I thought that Task 29 removed all ROMS. Info etc so you had to reinstall. What am I doing wrong as I followed the instructions to the letter from one of the posts on this excellent site.
Am getting really annoyed now. Is there someone who could do this for me if i send and pay for return postage and a drink please?
Any further info and will try again tonight one more time
Many thanks
Jay
Click to expand...
Click to collapse
I know that this may sound strange, but try formatting your SD card. When my phone starts behaving badly, fully formatting the SD solved the problem. Checking it for system file errors usually gives the same results, but doing a full format using the SD card formatter at first gives better results.
you probably have a ROM loaded in your SD card.
if your SD card root has a file called LEOIMG.NBH then it will try to flash it immediately on booting the phone, it's part of the SPL instructions. Delete or rename that file or cancel the flash.
orangekid said:
you probably have a ROM loaded in your SD card.
if your SD card root has a file called LEOIMG.NBH then it will try to flash it immediately on booting the phone, it's part of the SPL instructions. Delete or rename that file or cancel the flash.
Click to expand...
Click to collapse
I you mean me, no I don't flash through SD. but that's a good advice as well.
when the SD has severe System file errors, I noticed that my phone ran extremely slow. correcting those errors made my phone return to it's snappy self.