Ok so i was using shadowline's rom and i noticed that in his rom if i was using my bluetooth headset the proximity sensor was still active. His rom was the only one that had this out of all the roms i tried. So i wrote a little app to enable this is every rom. I have only tested it on EnergyRom 6.5.1 but it should work on any rom. You will need .net3.5
**EDIT**
I have made a little fix so that dot fred task manager works with this app
What does this do exactly?
it keeps the proximity sensor active when using bluetooth so if you put it in your pocket the screen automatically turns off when you pull it out of your pocket it turns on
Thanks for sharing!
I´ll give it a shot
Is this for wm6.5 only? The proximity sensor works on my TP2 (wm6.1) without the patch.
Mesquire said:
Is this for wm6.5 only? The proximity sensor works on my TP2 (wm6.1) without the patch.
Click to expand...
Click to collapse
the proximity sensor does not work in some roms, when i wrote this app i was using a rom that it did not work. I have not used tp2 on wm6.1 so i did not know that.
does this cab change a registry key or does it act in another way?
thanks
airon11 said:
does this cab change a registry key or does it act in another way?
thanks
Click to expand...
Click to collapse
change registry
irus said:
change registry
Click to expand...
Click to collapse
which is the key changed?
thanks
Thanks IRUS.
I'll check it out and post back although I'm sure that it works now given that you fixed it.
airon11 said:
which is the key changed?
thanks
Click to expand...
Click to collapse
HKLM,System\state\phone\PSensorStatus
irus said:
HKLM,System\state\phone\PSensorStatus
Click to expand...
Click to collapse
thanks for the info..
so if i understood correctly, ther's an executable that runs on background and changes that key to 1 also when the bt handsfree is on.right?
airon11 said:
thanks for the info..
so if i understood correctly, ther's an executable that runs on background and changes that key to 1 also when the bt handsfree is on.right?
Click to expand...
Click to collapse
well you won't be able to tell cause the proximity sensor works with out my app if you don't have bt on
irus said:
well you won't be able to tell cause the proximity sensor works with out my app if you don't have bt on
Click to expand...
Click to collapse
i know that..i was just curious to understand what your cab is doing, and i saw the process running..i was asking for this reason
airon11 said:
i know that..i was just curious to understand what your cab is doing, and i saw the process running..i was asking for this reason
Click to expand...
Click to collapse
sorry i guess im not understanding what you are saying so let me frase it another way. the app checks to see if your on your phone, it does not matter if your using bt or not, then enables proximity sensor if your on the phone even if your not using bt. hope this helps
irus said:
sorry i guess im not understanding what you are saying so let me frase it another way. the app checks to see if your on your phone, it does not matter if your using bt or not, then enables proximity sensor if your on the phone even if your not using bt. hope this helps
Click to expand...
Click to collapse
ok, thank you for the explanation.i was trying to understand how it works and when..now it's all clear!
irus said:
Ok so i was using shadowline's rom and i noticed that in his rom if i was using my bluetooth headset the proximity sensor was still active. His rom was the only one that had this out of all the roms i tried. So i wrote a little app to enable this is every rom. I have only tested it on EnergyRom 6.5.1 but it should work on any rom. You will need .net3.5
**EDIT**
I have made a little fix so that dot fred task manager works with this app
Click to expand...
Click to collapse
hi
i have a htc tp2, proximity sensor is always on also when on bluetooth, can i disable this promixitysensor?
thanks
nolan
Related
where can I get Voice Command 1.6 cab?
Here's the place I found with a quick search...
He wants it free im sure. I have it but I cant attach it here for some reason
You mean this one ?
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
http://rapidshare.com/files/44070565/BT_fixed_MS_VC_1.60_WM6_8525.CAB
wpbear said:
http://rapidshare.com/files/44070565/BT_fixed_MS_VC_1.60_WM6_8525.CAB
Click to expand...
Click to collapse
does this fix the incoming announe issue?
silverzz28 said:
does this fix the incoming announe issue?
Click to expand...
Click to collapse
it is the MS VoiceCommand and with the BT Config 1.9f in one CAB.
http://forum.xda-developers.com/showpost.php?p=1161652&postcount=11
Install then set bt 5 to MS VC, then go to prog and run BT Voice Config and set as the thread above says..then SR.
Thanks but that still does not fix it on my end for wm6 version. my 8525 doesnt even have button 5. only goes to 4. I set it to the comm manger buttin which was 4. Also what setting are you putting the vc at in under phone and then options?
silverzz28 said:
Thanks but that still does not fix it on my end for wm6 version. my 8525 doesnt even have button 5. only goes to 4. I set it to the comm manger buttin which was 4. Also what setting are you putting the vc at in under phone and then options?
Click to expand...
Click to collapse
gett PTT Fix..depend on your ROM though. I think you have to have Bt 5 to make this work.
http://forum.xda-developers.com/showthread.php?t=317339
This is the rom I am using. Also I what is the ptt fix? I use my ptt everyday
silverzz28 said:
http://forum.xda-developers.com/showthread.php?t=317339
This is the rom I am using. Also I what is the ptt fix? I use my ptt everyday
Click to expand...
Click to collapse
I dont know if this will work if you actually use PTT button for PTT. I think you are out of luck.
You shouldn't have to use the PTT button to use VC1.6 - the only time I use the PTT button to trigger it is when I have it set to play audio files and I have the headset trigger disabled.
Instead of doing a soft reset, you have to Enable the BT Command and then POWER OFF and then back on. Otherwise the registry settings don't stick...
wpbear said:
it is the MS VoiceCommand and with the BT Config 1.9f in one CAB.
http://forum.xda-developers.com/showpost.php?p=1161652&postcount=11
Install then set bt 5 to MS VC, then go to prog and run BT Voice Config and set as the thread above says..then SR.
Click to expand...
Click to collapse
install unsuccessful.
How do I prepare my 8525 for the install?
Blk Satin
.9f cab
vc1.6
Thanx
zeddock
I installed this vc and it now works.
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
The vc button is number 3 on the 8525 att wm6 rom
silverzz28 said:
I installed this vc and it now works.
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
The vc button is number 3 on the 8525 att wm6 rom
Click to expand...
Click to collapse
So you had same problems and this fixed it?
Yes I had issues with it not saying the incoming call feature
silverzz28 said:
I installed this vc and it now works.
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
The vc button is number 3 on the 8525 att wm6 rom
Click to expand...
Click to collapse
I do not know why but THIS ONE WORKS!
Bluetooth (BT) no longer working twice!
Simple install too!
It is working on my flashed Satin. Hope same for the X version of Black.
zeddock
PS. Who is responsible for this great fix please?
zeddock said:
I do not know why but THIS ONE WORKS!
Bluetooth (BT) no longer working twice!
Simple install too!
It is working on my flashed Satin. Hope same for the X version of Black.
zeddock
PS. Who is responsible for this great fix please?
Click to expand...
Click to collapse
Hello there!
Is this an international version or just for english speaking? Does the WM6 mean it is for Windows Mobile 6? Is there a link to a german speaking version?
I know, many questions...
JueLue
Where can i find Voice Command for WM5.
VC1.6 will work on WM5 or 6. VC1.5 only works on WM5.
As for languages, do a google search - handandgo.com sells VC, but not sure of languages beyond English and UK English
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
billu said:
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
Click to expand...
Click to collapse
looks like a nice tool, but after I installed on my Ameo I tried to use GSen Version 1.40.
But a window popup with following message :
cannot connect to GSensor (1)
mhh, doesn't run on Ameo ... and delete it ...
Ameo, t-mobile ROM version 6
btw: I've now asked the developer why GSen is not running on Ameo ... hope I get an answer..
Accelerometer
Hey,
I've installed it on my HTC Advantage X7510 with WM6.! Professional, and I can confirm that it works.
When I'm in the today screen and I turn the PDA it does turn in Landscape and Portrait mode with no problem great at last it works.
Thanks for the link if anybody what's me to try anything please let me known.
Thanks
Gigino
I am happy for you gigino, but I am in the same boat as palmchen (have a X7500 with t-mobile WM6 ROM).
Perhaps the interface to the sensor is slightly different between WM6 and 6.1
I am sure it can't be that difficult to access it from WM6. Hopefully the developer will be able to implement it or give some clue which will assist some brainbox from this community in hacking this version to get working with WM6. In my eyes this is one of those killer apps.
I tried this on wm6.1, and had the same error message.
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
sergiopi said:
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
Click to expand...
Click to collapse
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
cktlcmd said:
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
Click to expand...
Click to collapse
For some it is a must have. For others, it is an annoyance and irritation.
only because we can't get it working!
Sorry guys, we doesn´t have these devices for testing.
We just was surprised about the info, our tool is working on HTC Advantage X7510.
Also we not know the reason why it is not working on HTC Advantage X7500.
Possible reasons:
- missing/different software driver
- different ROM/ACU version
- missing needed hardware
As i said, we cannot test because of missing hardware.
billu said:
only because we can't get it working!
Click to expand...
Click to collapse
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
eaglesteve said:
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
Click to expand...
Click to collapse
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
AnnaW said:
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
Click to expand...
Click to collapse
Thanks for the info, but I still far prefer assigning rotate screen to a hardware button and just press that when I want to rotate.
Palmchen said:
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Click to expand...
Click to collapse
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
sergiopi said:
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
Click to expand...
Click to collapse
mhh, that makes me sadly ...
I would wish it will go faster and will run on my device (german tmobile WM6) ..
sergiopi said:
the rotation is too slow
Click to expand...
Click to collapse
Screen rotation is fast on mine. Might be ROM or today screen related in yours.
The speed you can change in settings: #timeout(value) - default value 1000 ms
Check http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
X7500 (Ameo) with AP4 or AP5
I have tried it, but still I get the message that the gsensor cannot be found.
Edit:
Oeps it just start working. I noticed the veuflo was disabled.
can anyone post those .dll files, so others can use them? thanks
Here is HTC G-Sensor Calibrator extracted from HTC Raphael, works as well on Diamond.
[EDIT] G-Sensor can't be calibred on Diamond since original driver doesn't consider calibration data... We need to port Raphael driver.
Diamond users, I am preparing a big surprise for you...
Enjoy!
Wow, that's awesome !
Thank You
Doesn't seem to work for me. Installed it and ran the calibration.
However, it seemed that it didn't save the calibration for me?
Using bElite 0.95.
It doen't work for me, orginal duch rom.
Its say calibration completed but the bubbels are still not in the middle.
Unfortunately for me too. On Italian Original ROM 1.37 it returns 'Calibration Completed' but after that the left-right bubble turn back un-aligned.
...
What kind a big surprise Schaps, i'm getting so curious!!!
I had the impression it was working the first time I tried... Am I wrong?
Ok I will investigate to get it fully working, I think it should be possible.
I get the same thing. The Horizontal bubble is spot on but the vertical is a tiny bit out.
When you correct it, it says its calibrated then the Vertical bubble goes back to where it was?
Strange.
Nice find tho.
Im using a standard Stock HTC Rom 1.37.405.1 WWE. Not a cooked Rom.
GalliKO said:
What kind a big surprise Schaps, i'm getting so curious!!!
Click to expand...
Click to collapse
You will know more this week-end...
schaps said:
You will know more this week-end...
Click to expand...
Click to collapse
Great, i love suprises! Thanks schaps for all your hardwork and discoveries. I speak for all the Diamond users on here im sure!
guys..how can we really make sure the phone is flat? i tried with my diamond cover off, but if u touch the edge of the phone, you still can feel actually its not firmly flatten right?
BTW..i tried out the calibration tool as well...after re-enter the calibration tool with 1st calibration done, the reading is out again
For me, it does calibrate my G-Sensor, but if i soft reset the device, it come back to the same setting
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Very impressive
Dear,
I try it on my HTC original 1.37.406.1 French the soft is beautiful but can't calibrabe. Hope it did in a few time because it seems to be usefull.
Thank you.
Sorry but no calibation on my german o2 XDA Diamond with the orginal Rom! But i´m sure you guys will solve the problem!
sergiopi said:
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Click to expand...
Click to collapse
The Athena has a LIS302DL G-sensor whereas the Diamond (and Raphael?) has a Kionix KXSD9.
This utility runs on my Diamond, but does not calibrate the sensor. Maybe this utility is only intended for a specific chip?
Will try it! Thanks
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Ok,
the software works for sure because it changes some registry keys under :
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GSensor
It changes the "calibrateX-Y" keys that were all set at 0 before. I've spot it writes a very strange value for key Calibrate3-2, and I guess that's why the Gsensor driver does set them back to default values. I am trying to understand how it works right now.
EDIT: Noway!! The data in regsitry are always set to default on reset, the strange value could be a negative number in an unsigned rappresentation. The good news is that the calibration work 'til reset.
P.S.: Some of the masters could please be so gentle to advice me on what disassembler to use for ppc software ? I searched this forum but I got confused. Thanks a lot.
Calibration works but Diamond driver doesn't consider calibration data, so there is no way to calibrate Diamond G-sensor using original driver. We need Raphael driver since it will use calibration data stored in registry. I have tried to port this driver to Diamond since it has exactly the same accelerometer hardware, but it doesn't work... It may be because Diamond doesn't have keyboard (G-Sensor should be automatically stopped on Touch Pro when keyboard is out or when device is in low power mode).
uniqueboy said:
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Click to expand...
Click to collapse
VueFLO is part of my surprise
It works on few apps at the moment but I plan to support most of apps in the future (including IE and Opera of course).
HTCSensorSDK for the LG Expo here:
http://www.chainfire.eu/articles/70/LG_Expo_GSensor/
Thanks!
Awesome work there Chainfire! much appreciated
Thank you chainfire for the cab, and thanks juger for bugging him
has anyone tried this out...how's it work
branedge said:
has anyone tried this out...how's it work
Click to expand...
Click to collapse
excellent...tested and working here...best news of my morning!
teeter still knows im not n htc device
killerskincanoe said:
excellent...tested and working here...best news of my morning!
teeter still knows im not n htc device
Click to expand...
Click to collapse
there are a few versions of teeter out there that are patched, and i can conferm that teeter does work with this driver. BUT ive only been able to find a vga version .
EVERY app ive tried so fare works!
jug6ernaut said:
EVERY app ive tried so fare works!
Click to expand...
Click to collapse
can u post a list of working / non working
obviously boing works
ive tried a few water level apps without much success
killerskincanoe said:
can u post a list of working / non working
obviously boing works
ive tried a few water level apps without much success
Click to expand...
Click to collapse
woot? well i havent had any that havent worked :\ but ill start a new thread with working/not working.
G-sensor seems to turn off auto-rotate after running apps :/
phatride4ever said:
G-sensor seems to turn off auto-rotate after running apps :/
Click to expand...
Click to collapse
like while an app is running? or after the app has been run?
After running an app with the g-sensor, auto-rotate shuts off.
Hmm well, it does perform a clean up / turn off even when exiting. However, Ferrari (or whatever the game is called) does this as well... :/
I know that when you touch the screen, it does not vibrate letting you know that a key was pressed. Is there an app so that when you do touch a key, that it would slightly vibrate?
Comptronic said:
I know that when you touch the screen, it does not vibrate letting you know that a key was pressed. Is there an app so that when you do touch a key, that it would slightly vibrate?
Click to expand...
Click to collapse
Yes, there is. I believe that you will find it in the Dev & Hacking section and it goes by the name "Haptic Feedback" or something like that. I don't have the cab or else I would upload it... sorry.
egzthunder1 said:
Yes, there is. I believe that you will find it in the Dev & Hacking section and it goes by the name "Haptic Feedback" or something like that. I don't have the cab or else I would upload it... sorry.
Click to expand...
Click to collapse
Thank you for pointing me in the correct direction. I found an app called Touch Back v1 Beta 4 from this thread but it didn't work properly. I found another app called Touch Response 0.3.2 from this thread and also doesn't work properly.
Any other help?
Comptronic said:
Thank you for pointing me in the correct direction. I found an app called Touch Back v1 Beta 4 from this thread but it didn't work properly. I found another app called Touch Response 0.3.2 from this thread and also doesn't work properly.
Any other help?
Click to expand...
Click to collapse
I was actually thinking about Touch Response. That should work though What exactly isn't working?
egzthunder1 said:
I was actually thinking about Touch Response. That should work though What exactly isn't working?
Click to expand...
Click to collapse
The length of the vibration. I set it to 1ms and it seems to vibrate for 1 second. I also went it to the Registry and changed the "strength" of the vibration and that didn't help.
Comptronic said:
The length of the vibration. I set it to 1ms and it seems to vibrate for 1 second. I also went it to the Registry and changed the "strength" of the vibration and that didn't help.
Click to expand...
Click to collapse
Maybe the units of time in the registry are not in ms. Try to play with the values and see what happens.
Were you using Touch Response on WinMo 6.1? Because I have noticed that haptic feedback does not work very well with WinMo 6.1 but it works fine on WinMo 6.5.
KralHiPolymer said:
Were you using Touch Response on WinMo 6.1? Because I have noticed that haptic feedback does not work very well with WinMo 6.1 but it works fine on WinMo 6.5.
Click to expand...
Click to collapse
Yes, on Windows Mobile 6.1.
Comptronic said:
Yes, on Windows Mobile 6.1.
Click to expand...
Click to collapse
Take it to 6.5 or later and see if you still have the same issue.
Try Touch Response. But I'm not sure it will work on WM 6.1. It was one of the preinstalled apps on NFSANS 6.5 ROM
mikurej95 said:
Try Touch Response. But I'm not sure it will work on WM 6.1. It was one of the preinstalled apps on NFSANS 6.5 ROM
Click to expand...
Click to collapse
Has already been suggested.
egzthunder1 said:
Take it to 6.5 or later and see if you still have the same issue.
Click to expand...
Click to collapse
This may be a stupid question but, how can I upgrade to Windows Mobile 6.5?
Comptronic said:
This may be a stupid question but, how can I upgrade to Windows Mobile 6.5?
Click to expand...
Click to collapse
Follow my guide...
egzthunder1 said:
Take it to 6.5 or later and see if you still have the same issue.
Click to expand...
Click to collapse
What guide are you talking about? Am I missing something?
Comptronic said:
What guide are you talking about? Am I missing something?
Click to expand...
Click to collapse
In my signature, there is a link that says "Vogue" click on it and it will take you straight to my guide.