I know that when you touch the screen, it does not vibrate letting you know that a key was pressed. Is there an app so that when you do touch a key, that it would slightly vibrate?
Comptronic said:
I know that when you touch the screen, it does not vibrate letting you know that a key was pressed. Is there an app so that when you do touch a key, that it would slightly vibrate?
Click to expand...
Click to collapse
Yes, there is. I believe that you will find it in the Dev & Hacking section and it goes by the name "Haptic Feedback" or something like that. I don't have the cab or else I would upload it... sorry.
egzthunder1 said:
Yes, there is. I believe that you will find it in the Dev & Hacking section and it goes by the name "Haptic Feedback" or something like that. I don't have the cab or else I would upload it... sorry.
Click to expand...
Click to collapse
Thank you for pointing me in the correct direction. I found an app called Touch Back v1 Beta 4 from this thread but it didn't work properly. I found another app called Touch Response 0.3.2 from this thread and also doesn't work properly.
Any other help?
Comptronic said:
Thank you for pointing me in the correct direction. I found an app called Touch Back v1 Beta 4 from this thread but it didn't work properly. I found another app called Touch Response 0.3.2 from this thread and also doesn't work properly.
Any other help?
Click to expand...
Click to collapse
I was actually thinking about Touch Response. That should work though What exactly isn't working?
egzthunder1 said:
I was actually thinking about Touch Response. That should work though What exactly isn't working?
Click to expand...
Click to collapse
The length of the vibration. I set it to 1ms and it seems to vibrate for 1 second. I also went it to the Registry and changed the "strength" of the vibration and that didn't help.
Comptronic said:
The length of the vibration. I set it to 1ms and it seems to vibrate for 1 second. I also went it to the Registry and changed the "strength" of the vibration and that didn't help.
Click to expand...
Click to collapse
Maybe the units of time in the registry are not in ms. Try to play with the values and see what happens.
Were you using Touch Response on WinMo 6.1? Because I have noticed that haptic feedback does not work very well with WinMo 6.1 but it works fine on WinMo 6.5.
KralHiPolymer said:
Were you using Touch Response on WinMo 6.1? Because I have noticed that haptic feedback does not work very well with WinMo 6.1 but it works fine on WinMo 6.5.
Click to expand...
Click to collapse
Yes, on Windows Mobile 6.1.
Comptronic said:
Yes, on Windows Mobile 6.1.
Click to expand...
Click to collapse
Take it to 6.5 or later and see if you still have the same issue.
Try Touch Response. But I'm not sure it will work on WM 6.1. It was one of the preinstalled apps on NFSANS 6.5 ROM
mikurej95 said:
Try Touch Response. But I'm not sure it will work on WM 6.1. It was one of the preinstalled apps on NFSANS 6.5 ROM
Click to expand...
Click to collapse
Has already been suggested.
egzthunder1 said:
Take it to 6.5 or later and see if you still have the same issue.
Click to expand...
Click to collapse
This may be a stupid question but, how can I upgrade to Windows Mobile 6.5?
Comptronic said:
This may be a stupid question but, how can I upgrade to Windows Mobile 6.5?
Click to expand...
Click to collapse
Follow my guide...
egzthunder1 said:
Take it to 6.5 or later and see if you still have the same issue.
Click to expand...
Click to collapse
What guide are you talking about? Am I missing something?
Comptronic said:
What guide are you talking about? Am I missing something?
Click to expand...
Click to collapse
In my signature, there is a link that says "Vogue" click on it and it will take you straight to my guide.
Related
Touch Flo on wm side?
No one for fun had installed on it?
No news about the unlock of memory card in wm side?
pitt1983 said:
Touch Flo on wm side?
No one for fun had installed on it?
No news about the unlock of memory card in wm side?
Click to expand...
Click to collapse
na. might get ltxda or cmonex to try it once they have devices in hand.
touch flo
installed touch flo, the program take almost all the free space.
enabled it. but when i set the side to start thge touch cube thhe program said to me that "biotouch is not running".
any suggestion?
pitt1983 said:
installed touch flo, the program take almost all the free space.
enabled it. but when i set the side to start thge touch cube thhe program said to me that "biotouch is not running".
any suggestion?
Click to expand...
Click to collapse
i use SPB Mobile shell. Does use less resources and works perfect on the shift.
don't remember
sbueschi said:
i use SPB Mobile shell. Does use less resources and works perfect on the shift.
Click to expand...
Click to collapse
don't remember this program, i will see..
thnx
you can also probably get just the scrolling working. dont know if it wouldnt require a mod of the touch.dll though. its like other said. better use the alternatives.
sbueschi said:
i use SPB Mobile shell. Does use less resources and works perfect on the shift.
Click to expand...
Click to collapse
Hi, Can you help me understand please. SPB Mobile Shell, you say works on the Shift...has it been specially written for the Shift, or are you saying any PPC software, will work equally as well on the Shift? I thought the software had to address the different screen sizes of various devices..no?
Thanks in advance.
BTW...I onw a Shift, so i'm dying to know this.
lewboy said:
Hi, Can you help me understand please. SPB Mobile Shell, you say works on the Shift...has it been specially written for the Shift, or are you saying any PPC software, will work equally as well on the Shift? I thought the software had to address the different screen sizes of various devices..no?
Thanks in advance.
BTW...I onw a Shift, so i'm dying to know this.
Click to expand...
Click to collapse
you must try to install different programs, due to the poor memory of the wm side i did not try to install many programs.
opera works fine like on my kaiser, office too, some little game and sprite backup, spbackup, profimail also works well like on the kaiser. others i don't know.
try and try..
lewboy said:
Hi, Can you help me understand please. SPB Mobile Shell, you say works on the Shift...has it been specially written for the Shift, or are you saying any PPC software, will work equally as well on the Shift? I thought the software had to address the different screen sizes of various devices..no?
Thanks in advance.
BTW...I onw a Shift, so i'm dying to know this.
Click to expand...
Click to collapse
the shift has a larger screen but the software does not have to be rewritten for smaller or larger screens.
Pawel062 said:
the shift has a larger screen but the software does not have to be rewritten for smaller or larger screens.
Click to expand...
Click to collapse
Thanks guys for the feedback. I've tried installing a few titles, but they don't seem to work. I'll keep trying I guess!
Thanks again.
lewboy said:
Thanks guys for the feedback. I've tried installing a few titles, but they don't seem to work. I'll keep trying I guess!
Thanks again.
Click to expand...
Click to collapse
if you write us what are applications that you tried we can try on ours devices.
HTC Shift WM programs...
pitt1983 said:
if you write us what are applications that you tried we can try on ours devices.
Click to expand...
Click to collapse
Hi and thanks for the offer. I've tried to install Advanced Brain Trainer 2, but in refuses to run on my Shift. Is there somewhere online that shows compatible programs that will run OK on this device?
Thanks for any help or suggestions.
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
billu said:
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
Click to expand...
Click to collapse
looks like a nice tool, but after I installed on my Ameo I tried to use GSen Version 1.40.
But a window popup with following message :
cannot connect to GSensor (1)
mhh, doesn't run on Ameo ... and delete it ...
Ameo, t-mobile ROM version 6
btw: I've now asked the developer why GSen is not running on Ameo ... hope I get an answer..
Accelerometer
Hey,
I've installed it on my HTC Advantage X7510 with WM6.! Professional, and I can confirm that it works.
When I'm in the today screen and I turn the PDA it does turn in Landscape and Portrait mode with no problem great at last it works.
Thanks for the link if anybody what's me to try anything please let me known.
Thanks
Gigino
I am happy for you gigino, but I am in the same boat as palmchen (have a X7500 with t-mobile WM6 ROM).
Perhaps the interface to the sensor is slightly different between WM6 and 6.1
I am sure it can't be that difficult to access it from WM6. Hopefully the developer will be able to implement it or give some clue which will assist some brainbox from this community in hacking this version to get working with WM6. In my eyes this is one of those killer apps.
I tried this on wm6.1, and had the same error message.
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
sergiopi said:
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
Click to expand...
Click to collapse
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
cktlcmd said:
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
Click to expand...
Click to collapse
For some it is a must have. For others, it is an annoyance and irritation.
only because we can't get it working!
Sorry guys, we doesn´t have these devices for testing.
We just was surprised about the info, our tool is working on HTC Advantage X7510.
Also we not know the reason why it is not working on HTC Advantage X7500.
Possible reasons:
- missing/different software driver
- different ROM/ACU version
- missing needed hardware
As i said, we cannot test because of missing hardware.
billu said:
only because we can't get it working!
Click to expand...
Click to collapse
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
eaglesteve said:
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
Click to expand...
Click to collapse
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
AnnaW said:
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
Click to expand...
Click to collapse
Thanks for the info, but I still far prefer assigning rotate screen to a hardware button and just press that when I want to rotate.
Palmchen said:
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Click to expand...
Click to collapse
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
sergiopi said:
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
Click to expand...
Click to collapse
mhh, that makes me sadly ...
I would wish it will go faster and will run on my device (german tmobile WM6) ..
sergiopi said:
the rotation is too slow
Click to expand...
Click to collapse
Screen rotation is fast on mine. Might be ROM or today screen related in yours.
The speed you can change in settings: #timeout(value) - default value 1000 ms
Check http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
X7500 (Ameo) with AP4 or AP5
I have tried it, but still I get the message that the gsensor cannot be found.
Edit:
Oeps it just start working. I noticed the veuflo was disabled.
can anyone post those .dll files, so others can use them? thanks
Ok so i was using shadowline's rom and i noticed that in his rom if i was using my bluetooth headset the proximity sensor was still active. His rom was the only one that had this out of all the roms i tried. So i wrote a little app to enable this is every rom. I have only tested it on EnergyRom 6.5.1 but it should work on any rom. You will need .net3.5
**EDIT**
I have made a little fix so that dot fred task manager works with this app
What does this do exactly?
it keeps the proximity sensor active when using bluetooth so if you put it in your pocket the screen automatically turns off when you pull it out of your pocket it turns on
Thanks for sharing!
I´ll give it a shot
Is this for wm6.5 only? The proximity sensor works on my TP2 (wm6.1) without the patch.
Mesquire said:
Is this for wm6.5 only? The proximity sensor works on my TP2 (wm6.1) without the patch.
Click to expand...
Click to collapse
the proximity sensor does not work in some roms, when i wrote this app i was using a rom that it did not work. I have not used tp2 on wm6.1 so i did not know that.
does this cab change a registry key or does it act in another way?
thanks
airon11 said:
does this cab change a registry key or does it act in another way?
thanks
Click to expand...
Click to collapse
change registry
irus said:
change registry
Click to expand...
Click to collapse
which is the key changed?
thanks
Thanks IRUS.
I'll check it out and post back although I'm sure that it works now given that you fixed it.
airon11 said:
which is the key changed?
thanks
Click to expand...
Click to collapse
HKLM,System\state\phone\PSensorStatus
irus said:
HKLM,System\state\phone\PSensorStatus
Click to expand...
Click to collapse
thanks for the info..
so if i understood correctly, ther's an executable that runs on background and changes that key to 1 also when the bt handsfree is on.right?
airon11 said:
thanks for the info..
so if i understood correctly, ther's an executable that runs on background and changes that key to 1 also when the bt handsfree is on.right?
Click to expand...
Click to collapse
well you won't be able to tell cause the proximity sensor works with out my app if you don't have bt on
irus said:
well you won't be able to tell cause the proximity sensor works with out my app if you don't have bt on
Click to expand...
Click to collapse
i know that..i was just curious to understand what your cab is doing, and i saw the process running..i was asking for this reason
airon11 said:
i know that..i was just curious to understand what your cab is doing, and i saw the process running..i was asking for this reason
Click to expand...
Click to collapse
sorry i guess im not understanding what you are saying so let me frase it another way. the app checks to see if your on your phone, it does not matter if your using bt or not, then enables proximity sensor if your on the phone even if your not using bt. hope this helps
irus said:
sorry i guess im not understanding what you are saying so let me frase it another way. the app checks to see if your on your phone, it does not matter if your using bt or not, then enables proximity sensor if your on the phone even if your not using bt. hope this helps
Click to expand...
Click to collapse
ok, thank you for the explanation.i was trying to understand how it works and when..now it's all clear!
irus said:
Ok so i was using shadowline's rom and i noticed that in his rom if i was using my bluetooth headset the proximity sensor was still active. His rom was the only one that had this out of all the roms i tried. So i wrote a little app to enable this is every rom. I have only tested it on EnergyRom 6.5.1 but it should work on any rom. You will need .net3.5
**EDIT**
I have made a little fix so that dot fred task manager works with this app
Click to expand...
Click to collapse
hi
i have a htc tp2, proximity sensor is always on also when on bluetooth, can i disable this promixitysensor?
thanks
nolan
Hey everyone...
I've been looking everywhere for a navipanel cab for our phone. I had one for the fuze (touch pro) but as the Touch pro 2 is a wvga I dont think it will work.
I know there are some roms out here with it kicking around but I cant find any actual install cabs. If someone has it would they mind sharing it with the community?
Thanks!
201 views and NO one has a cab...... lovely! This at least says people want it and are interested if there was one. Someone out there must have it.
Just for the record The attached picture is what I am talking about.
Aaron McCarthy said:
201 views and NO one has a cab...... lovely! This at least says people want it and are interested if there was one. Someone out there must have it.
Click to expand...
Click to collapse
PM Ark666. He seems to be the only one who had it working on TP2
I have a package I got from ark666, but have yet to get it cabbed up as Im not the strongest in that dept. It may work cabbed up, but may need to be cooked in.
I´ve cabbed it up, and i had no success, it seems it has to be cooked in.
Cheers.
well.... crap!
Aaron McCarthy said:
well.... crap!
Click to expand...
Click to collapse
If it's any consolation, he said in his thread that he will cook it into a rom for us.
Here you go...just uploaded it...its a different Navipanel then the one in your picture but same basic functions
http://www.megaupload.com/?d=WPPICF0D
if you can reskin it be my guest
nemo0405 said:
Here you go...just uploaded it...its a different Navipanel then the one in your picture but same basic functions
http://www.megaupload.com/?d=WPPICF0D
if you can reskin it be my guest
Click to expand...
Click to collapse
Odds are this is the vga version from the fuze/touch pro... correct?
ark666 said:
I´ve cabbed it up, and i had no success, it seems it has to be cooked in.
Cheers.
Click to expand...
Click to collapse
Can you post your cab so we can try it on our roms... just for fun. Wouldnt hurt right?
Aaron McCarthy said:
Odds are this is the vga version from the fuze/touch pro... correct?
Click to expand...
Click to collapse
That is the Navi Panel from the HTC Iolite.
dwizzy130
ark666 sent me his cab file.. just waiting for permission to post it if anyone else wants to give it a try. I did have the navipanel files in my phone originally but when I would bring up the program it showed no icons at all. After installing his cab the icons are there however the only icon that I am able to select is the make a call one which brings me into the 3 options dialer, favoirtes and recent calls then sub menus from there.
This was all sort of to be expected but figured I would give it a shot anyway.
Ideally, if we can get this version of the navipanel to work with other GPS units like the one from Iolite (hacked to work on the fuze/touch pro) this this ap would be perfect.
I've attached some screen shots of the program running before the cab install and then after.
is this similar to the xpheria x1 panels app ive seen floating around?
I dont believe so... I think what you are talking about is an entirely different UI. This is just a program that sort of simplies the most common functions of the phone for in the car. Gives you shortcuts right into your GPS program and shortcuts for phone calls.
Here's ark666 cab I was refering to in post #13.
http://www.4shared.com/file/193735396/baa5af9a/ARK_NAVIPANEL.html
Aaron McCarthy said:
Here's ark666 cab I was refering to in post #13.
http://www.4shared.com/file/193735396/baa5af9a/ARK_NAVIPANEL.html
Click to expand...
Click to collapse
Thanks mate. Did you ever get this to open up your nav program? I remember I had to mess with it a bit to get it to open Garmin. Had to trick it into thinking it was Co Pilot.
pablo11 said:
Thanks mate. Did you ever get this to open up your nav program? I remember I had to mess with it a bit to get it to open Garmin. Had to trick it into thinking it was Co Pilot.
Click to expand...
Click to collapse
Nope... can you share your "trick"
Aaron McCarthy said:
Nope... can you share your "trick"
Click to expand...
Click to collapse
Nevermind. I tried it and it doesnt work. The details are over in Ark's thread back when navipanel was in his roms. Shame. I'd love to see this working correctly.
Dear Pals,
Using Biotouch of 6.1 on 6.5 causing msgs when scrolling down and press finger to stop it to move to another box.
Is there a setting that prevent this!!! using biotouch from mega causing audio manager & youtub player to not scroll down correctly.
thx
I'm not 100% sure what biotouch is (it's for finger scrolling, right?), but I'm pretty sure you don't want it with 6.5. I've never used it; 6.5 has native finger scrolling that's better than anything in 6.1. My recommendation is to just dump it.
Farmer Ted said:
I'm not 100% sure what biotouch is (it's for finger scrolling, right?), but I'm pretty sure you don't want it with 6.5. I've never used it; 6.5 has native finger scrolling that's better than anything in 6.1. My recommendation is to just dump it.
Click to expand...
Click to collapse
lol im also using it in my rom will try to remove it andsee if i get better scrolling
Bros,
Removing biotouch will cause to loose the ability to change the sip language from sip menu.
can somebody upload biotouch from iolite kitchen or compatable device for jade??
miniterror said:
lol im also using it in my rom will try to remove it andsee if i get better scrolling
Click to expand...
Click to collapse
yeah, i tested too, but if i removed, HW buttons not working on HD
Wajk said:
yeah, i tested too, but if i removed, HW buttons not working on HD
Click to expand...
Click to collapse
yep you are correct so i put it back in and the biotouch.exe replaced for a dummy .exe
miniterror said:
yep you are correct so i put it back in and the biotouch.exe replaced for a dummy .exe
Click to expand...
Click to collapse
kindly need the steps of how u did this!!
mua30 said:
kindly need the steps of how u did this!!
Click to expand...
Click to collapse
just overwrite the file in youre kitchen with the one attached
miniterror said:
just overwrite the file in youre kitchen with the one attached
Click to expand...
Click to collapse
well, sanks ferry match
really thnx
In my case the dummy doesn't work for the blackstone.
It is required by the biotouch.dll to work. It crashes when you slide pages in the RSS Hub or slide between emails.
Have anyone found a different solution?
ypsmav said:
In my case the dummy doesn't work for the blackstone.
It is required by the biotouch.dll to work. It crashes when you slide pages in the RSS Hub or slide between emails.
Have anyone found a different solution?
Click to expand...
Click to collapse
i know it works for me:-o
i dont have rss hub(i do have a rss program but i think you are reffering to the rss on the home page?) in my roms but i know i can slide left and right in emails to go to the next or previous one and i have it cooked in every rom
I've found the way to use the dummy. I've added the programs which were crashing to the exception list, and problem solved!