where can I get Voice Command 1.6 cab?
Here's the place I found with a quick search...
He wants it free im sure. I have it but I cant attach it here for some reason
You mean this one ?
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
http://rapidshare.com/files/44070565/BT_fixed_MS_VC_1.60_WM6_8525.CAB
wpbear said:
http://rapidshare.com/files/44070565/BT_fixed_MS_VC_1.60_WM6_8525.CAB
Click to expand...
Click to collapse
does this fix the incoming announe issue?
silverzz28 said:
does this fix the incoming announe issue?
Click to expand...
Click to collapse
it is the MS VoiceCommand and with the BT Config 1.9f in one CAB.
http://forum.xda-developers.com/showpost.php?p=1161652&postcount=11
Install then set bt 5 to MS VC, then go to prog and run BT Voice Config and set as the thread above says..then SR.
Thanks but that still does not fix it on my end for wm6 version. my 8525 doesnt even have button 5. only goes to 4. I set it to the comm manger buttin which was 4. Also what setting are you putting the vc at in under phone and then options?
silverzz28 said:
Thanks but that still does not fix it on my end for wm6 version. my 8525 doesnt even have button 5. only goes to 4. I set it to the comm manger buttin which was 4. Also what setting are you putting the vc at in under phone and then options?
Click to expand...
Click to collapse
gett PTT Fix..depend on your ROM though. I think you have to have Bt 5 to make this work.
http://forum.xda-developers.com/showthread.php?t=317339
This is the rom I am using. Also I what is the ptt fix? I use my ptt everyday
silverzz28 said:
http://forum.xda-developers.com/showthread.php?t=317339
This is the rom I am using. Also I what is the ptt fix? I use my ptt everyday
Click to expand...
Click to collapse
I dont know if this will work if you actually use PTT button for PTT. I think you are out of luck.
You shouldn't have to use the PTT button to use VC1.6 - the only time I use the PTT button to trigger it is when I have it set to play audio files and I have the headset trigger disabled.
Instead of doing a soft reset, you have to Enable the BT Command and then POWER OFF and then back on. Otherwise the registry settings don't stick...
wpbear said:
it is the MS VoiceCommand and with the BT Config 1.9f in one CAB.
http://forum.xda-developers.com/showpost.php?p=1161652&postcount=11
Install then set bt 5 to MS VC, then go to prog and run BT Voice Config and set as the thread above says..then SR.
Click to expand...
Click to collapse
install unsuccessful.
How do I prepare my 8525 for the install?
Blk Satin
.9f cab
vc1.6
Thanx
zeddock
I installed this vc and it now works.
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
The vc button is number 3 on the 8525 att wm6 rom
silverzz28 said:
I installed this vc and it now works.
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
The vc button is number 3 on the 8525 att wm6 rom
Click to expand...
Click to collapse
So you had same problems and this fixed it?
Yes I had issues with it not saying the incoming call feature
silverzz28 said:
I installed this vc and it now works.
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
The vc button is number 3 on the 8525 att wm6 rom
Click to expand...
Click to collapse
I do not know why but THIS ONE WORKS!
Bluetooth (BT) no longer working twice!
Simple install too!
It is working on my flashed Satin. Hope same for the X version of Black.
zeddock
PS. Who is responsible for this great fix please?
zeddock said:
I do not know why but THIS ONE WORKS!
Bluetooth (BT) no longer working twice!
Simple install too!
It is working on my flashed Satin. Hope same for the X version of Black.
zeddock
PS. Who is responsible for this great fix please?
Click to expand...
Click to collapse
Hello there!
Is this an international version or just for english speaking? Does the WM6 mean it is for Windows Mobile 6? Is there a link to a german speaking version?
I know, many questions...
JueLue
Where can i find Voice Command for WM5.
VC1.6 will work on WM5 or 6. VC1.5 only works on WM5.
As for languages, do a google search - handandgo.com sells VC, but not sure of languages beyond English and UK English
Related
Super excelent voice dialling and Program Luncher for Magician, Jam and QTEK S100 also
Read this: http://forum.xda-developers.com/viewtopic.php?p=172877#172877
gazela00 said:
Super excelent voice dialling and Program Luncher for Magician, Jam and QTEK S100 also
Read this: http://forum.xda-developers.com/viewtopic.php?p=172877#172877
Click to expand...
Click to collapse
There are three programs mentioned and everything was tested om WM5 so which bersion works for Windows mobile 2003 I Jam ?
Hindoe said:
gazela00 said:
Super excelent voice dialling and Program Luncher for Magician, Jam and QTEK S100 also
Read this: http://forum.xda-developers.com/viewtopic.php?p=172877#172877
Click to expand...
Click to collapse
There are three programs mentioned and everything was tested om WM5 so which bersion works for Windows mobile 2003 I Jam ?
Click to expand...
Click to collapse
This one:
Simply Excelent. 99,99% accurate recognition for contacts and programs installed in a QTEK S100
Does this program require to record a voice tag per contact, or could you just call the name (like MS Voice Command)?
gazela00 said:
Hindoe said:
gazela00 said:
Super excelent voice dialling and Program Luncher for Magician, Jam and QTEK S100 also
Read this: http://forum.xda-developers.com/viewtopic.php?p=172877#172877
Click to expand...
Click to collapse
There are three programs mentioned and everything was tested om WM5 so which bersion works for Windows mobile 2003 I Jam ?
Click to expand...
Click to collapse
This one:
Simply Excelent. 99,99% accurate recognition for contacts and programs installed in a QTEK S100
Click to expand...
Click to collapse
But i read in your other thread it doesnt work with Tomtom so its either tomtom or this voice program r8?
kta said:
Does this program require to record a voice tag per contact, or could you just call the name (like MS Voice Command)?
Click to expand...
Click to collapse
It requires tag for every calling number.
Hello, ok, i installed Cyberon BA_WM5_Voice_Dialer_2.cab, i activated a voice tag through my contacts
How do i make a voice dial? :? Not through a BT headset
meres said:
Hello, ok, i installed Cyberon BA_WM5_Voice_Dialer_2.cab, i activated a voice tag through my contacts
How do i make a voice dial? :? Not through a BT headset
Click to expand...
Click to collapse
Just a little Press in Record buttom...it opens a window and you speak...or via Bluetooth headset...
Oops...doublepost.
Many thanks for the link. Finally a voicedialer that does the job like it is supposed to do !
Edit : also this program let's you activate the voicedialing function by pushing a button on your bluetooth headset. Untill now no other voicedialing-program was able to get this to work !!! Good stuff
daffie said:
Untill now no other voicedialing-program was able to get this to work !!! Good stuff
Click to expand...
Click to collapse
Wrong. We have this working long time ago under the Project VCABT http://forum.xda-developers.com/viewtopic.php?t=23558. We are free to use any program (MS VC,Cyberon VC, Cyberon VD, Fonix ...etc) and activate them by pressing the bluetooth headset button.
jackleung said:
daffie said:
Untill now no other voicedialing-program was able to get this to work !!! Good stuff
Click to expand...
Click to collapse
Wrong. We have this working long time ago under the Project VCABT http://forum.xda-developers.com/viewtopic.php?t=23558. We are free to use any program (MS VC,Cyberon VC, Cyberon VD, Fonix ...etc) and activate them by pressing the bluetooth headset button.
Click to expand...
Click to collapse
Hmm but if I remember correctly the VCABT-project meant some sort of workaround and/or changing settings/registry. With the Cyberon voicedialing-program, voicedialing-activation from bluetooth headset just works without any workaround, and works perfectly as well
xda mini + jabra bt250 headset. Works like a charm. Just press the button on the headset say the name and you are ready to go. And for the first time it actually picks up the voice through bluetooth headset. That's exactly what we were waiting for so long. Thanks so much :lol:
It also works with tomtom navigator simultaneously without any problems. Thanks again.
yes many thanks, work like a charm
Is it possible to unassign the record button to this program. With the button assingment on the settings page I can select whatever program I want, but it won't work because of this tool (which is really great.., only one disadvantage).
Is there a registry trick or something to have the record button reassigned to the program selected on the settings page?
Works like a charm
are there any plans for all sound to bletooth? (if the answer is yes can someone please post a link to it)
thanx
hi, it is a great program, but how can i stop a call? when i'm speaking if i press the button of the bluetooth it start a voice recognition again and it doesn't close the call.
daffie said:
jackleung said:
daffie said:
Untill now no other voicedialing-program was able to get this to work !!! Good stuff
Click to expand...
Click to collapse
Wrong. We have this working long time ago under the Project VCABT http://forum.xda-developers.com/viewtopic.php?t=23558. We are free to use any program (MS VC,Cyberon VC, Cyberon VD, Fonix ...etc) and activate them by pressing the bluetooth headset button.
Click to expand...
Click to collapse
Hmm but if I remember correctly the VCABT-project meant some sort of workaround and/or changing settings/registry. With the Cyberon voicedialing-program, voicedialing-activation from bluetooth headset just works without any workaround, and works perfectly as well
Click to expand...
Click to collapse
Can someone confirm this? Just downloaded Project VCABT last week and was about to install it onto my mini.
Cheers marto.
indigo said:
xda mini + jabra bt250 headset. Works like a charm. Just press the button on the headset say the name and you are ready to go. And for the first time it actually picks up the voice through bluetooth headset. That's exactly what we were waiting for so long. Thanks so much :lol:
Click to expand...
Click to collapse
How did you get this to work with the BT headset? I have the Sony HBH-662. Is it compatible with all BT headsets? It should be, right?
I upgraded to the new rom, and after doing so I lost my voice speed dial. I am using the rom with GPS enabled.
Is there something im missing.. I first noticed it when I hit the button.
DOH.
supperman2k said:
I upgraded to the new rom, and after doing so I lost my voice speed dial. I am using the rom with GPS enabled.
Is there something im missing.. I first noticed it when I hit the button.
DOH.
Click to expand...
Click to collapse
Which new ROM? There are quite a few around now! If it's the dopod ROM then the Voice Speed Dial is not included and there is Voice Commander instead.
The latest cooked ROM (see thread in the other forum) should have all the HTC customisations so Voice Speed Dial should be there.
Hi all,
I have the same problem.
I upgraded with:
RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.35.00.11_Shi p (LVSW Edition 2007-02-23)
But... no voice dial...
Where i can download that? Or Cyberon Voice Commander?
Thanks in advance
Here are!
Here are cyberon....
lapix said:
Here are cyberon....
Click to expand...
Click to collapse
Thanks man!
Ur the man!
anonimo said:
Which new ROM? There are quite a few around now! If it's the dopod ROM then the Voice Speed Dial is not included and there is Voice Commander instead.
The latest cooked ROM (see thread in the other forum) should have all the HTC customisations so Voice Speed Dial should be there.
Click to expand...
Click to collapse
Which rom do you recommend? Cooked or Dopod?
btw, thanks for the info guys.
Has anyone gotten the Voice Commnad 1.6 to initiate commands from the bluetooth headset with the x7501?
using the shipped wm6.
you need to edit the registry
hklm\software\oem\voicecommand\
change the path
I can use VoiceCommand 1.6 with my Jawbone and my LG Style-I without any registry changes. I just press the Send button as indicated in the manual for the BT device, here the VoiceCommand prompt, issue the command, and it executes. The process is the same as with no headset, except that I am pressing a button on the headset rather than on the x7500. I have an x7500 with WM6 and the x7501 ROM after using Olipro's SuperCID utility. You might want to take a look at Jetware extensions, which I learned about in this forum, though I don't believe that is necessary for VoiceCommand to work through a BT headset. Hope this helps.
irus said:
you need to edit the registry
hklm\software\oem\voicecommand\
change the path
Click to expand...
Click to collapse
Change the path??
are u guys using the U.S 1.6 version?
seems UK version only reach ver 1.5. The U.S version doesn't recognize my English properly.
is UK 1.6 version released?
I'm talking about the US version
royalmail said:
are u guys using the U.S 1.6 version?
seems UK version only reach ver 1.5. The U.S version doesn't recognize my English properly.
is UK 1.6 version released?
Click to expand...
Click to collapse
Yes, there's a version 1.6 for the UK on Handango. It's been out for a while now and I've been using it.
Looks like all I had to do was to soft reset.
It started working after I did a softreset.
I hard reset and reinstalled it just to be certain. And sure enough it worked without having to modify the registry.
i have a little problem.....msvc 1.6 i dunno wat build but it works fine except theres no voice confirmation.anyone know how 2 fix this?thanx
edit:found the fix...i needed the latest cab found in the kaiser forum.
killershot20 said:
Looks like all I had to do was to soft reset.
It started working after I did a softreset.
I hard reset and reinstalled it just to be certain. And sure enough it worked without having to modify the registry.
Click to expand...
Click to collapse
Did it turn on your Athena when you press the command button on your BT headset also? With the registry modification, the BT headset can turn on your Athena and listen to the voice command (Jabra BT8010)
Hi,
I have 2 Trinity's (from an auction) both with the same OS (WM 6.1).
On both I have installed Cybveron Voice Speed Dial 1.2. On one device it is working as aspected with a Bluetooth-Headset (voice dialing via headset). On the other device it's not working. Instead of starting the voice recognition the dialpad is shown.
I have found that there is no btagext.dll on the device that failed.
Unfortunately this file can't be copied (acces denied, I think because it's in ROM).
I have found some entries in this forum and others, but no download of btagext.dll.
For testing I have installed MS Voice Commander, but it's the same behaviour (dialpad is shown).
Now my questions:
- Can btagext.dll be the problem ? If yes, where can I download it ?
- Can anyone explain which 'modules' are involved in processing the voice dial via headset ?
Thanks
I had the same problem. Uninstall the Cyberon version you have, and try to install Cyberon Voice Speed Dialer v1.2_build_61226. After that you must repair the settings for hardware buttons, because this version mess them up. Worked for me.
vali_p33 said:
I had the same problem. Uninstall the Cyberon version you have, and try to install Cyberon Voice Speed Dialer v1.2_build_61226. After that you must repair the settings for hardware buttons, because this version mess them up. Worked for me.
Click to expand...
Click to collapse
This is the version I have installed. Settings for hardware buttons are ok.
Because it's the same with MS Voice Commander, I think it's not the Voice Speed Dialer.
Thanks
vali_p33 said:
I had the same problem. Uninstall the Cyberon version you have, and try to install Cyberon Voice Speed Dialer v1.2_build_61226. After that you must repair the settings for hardware buttons, because this version mess them up. Worked for me.
Click to expand...
Click to collapse
yes, after the buttons fix it works fine to me as well.
where can I download this from?
Try:
http://forum.xda-developers.com/showthread.php?t=295238&page=2
Ok so i was using shadowline's rom and i noticed that in his rom if i was using my bluetooth headset the proximity sensor was still active. His rom was the only one that had this out of all the roms i tried. So i wrote a little app to enable this is every rom. I have only tested it on EnergyRom 6.5.1 but it should work on any rom. You will need .net3.5
**EDIT**
I have made a little fix so that dot fred task manager works with this app
What does this do exactly?
it keeps the proximity sensor active when using bluetooth so if you put it in your pocket the screen automatically turns off when you pull it out of your pocket it turns on
Thanks for sharing!
I´ll give it a shot
Is this for wm6.5 only? The proximity sensor works on my TP2 (wm6.1) without the patch.
Mesquire said:
Is this for wm6.5 only? The proximity sensor works on my TP2 (wm6.1) without the patch.
Click to expand...
Click to collapse
the proximity sensor does not work in some roms, when i wrote this app i was using a rom that it did not work. I have not used tp2 on wm6.1 so i did not know that.
does this cab change a registry key or does it act in another way?
thanks
airon11 said:
does this cab change a registry key or does it act in another way?
thanks
Click to expand...
Click to collapse
change registry
irus said:
change registry
Click to expand...
Click to collapse
which is the key changed?
thanks
Thanks IRUS.
I'll check it out and post back although I'm sure that it works now given that you fixed it.
airon11 said:
which is the key changed?
thanks
Click to expand...
Click to collapse
HKLM,System\state\phone\PSensorStatus
irus said:
HKLM,System\state\phone\PSensorStatus
Click to expand...
Click to collapse
thanks for the info..
so if i understood correctly, ther's an executable that runs on background and changes that key to 1 also when the bt handsfree is on.right?
airon11 said:
thanks for the info..
so if i understood correctly, ther's an executable that runs on background and changes that key to 1 also when the bt handsfree is on.right?
Click to expand...
Click to collapse
well you won't be able to tell cause the proximity sensor works with out my app if you don't have bt on
irus said:
well you won't be able to tell cause the proximity sensor works with out my app if you don't have bt on
Click to expand...
Click to collapse
i know that..i was just curious to understand what your cab is doing, and i saw the process running..i was asking for this reason
airon11 said:
i know that..i was just curious to understand what your cab is doing, and i saw the process running..i was asking for this reason
Click to expand...
Click to collapse
sorry i guess im not understanding what you are saying so let me frase it another way. the app checks to see if your on your phone, it does not matter if your using bt or not, then enables proximity sensor if your on the phone even if your not using bt. hope this helps
irus said:
sorry i guess im not understanding what you are saying so let me frase it another way. the app checks to see if your on your phone, it does not matter if your using bt or not, then enables proximity sensor if your on the phone even if your not using bt. hope this helps
Click to expand...
Click to collapse
ok, thank you for the explanation.i was trying to understand how it works and when..now it's all clear!
irus said:
Ok so i was using shadowline's rom and i noticed that in his rom if i was using my bluetooth headset the proximity sensor was still active. His rom was the only one that had this out of all the roms i tried. So i wrote a little app to enable this is every rom. I have only tested it on EnergyRom 6.5.1 but it should work on any rom. You will need .net3.5
**EDIT**
I have made a little fix so that dot fred task manager works with this app
Click to expand...
Click to collapse
hi
i have a htc tp2, proximity sensor is always on also when on bluetooth, can i disable this promixitysensor?
thanks
nolan