I upgraded to the new rom, and after doing so I lost my voice speed dial. I am using the rom with GPS enabled.
Is there something im missing.. I first noticed it when I hit the button.
DOH.
supperman2k said:
I upgraded to the new rom, and after doing so I lost my voice speed dial. I am using the rom with GPS enabled.
Is there something im missing.. I first noticed it when I hit the button.
DOH.
Click to expand...
Click to collapse
Which new ROM? There are quite a few around now! If it's the dopod ROM then the Voice Speed Dial is not included and there is Voice Commander instead.
The latest cooked ROM (see thread in the other forum) should have all the HTC customisations so Voice Speed Dial should be there.
Hi all,
I have the same problem.
I upgraded with:
RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.35.00.11_Shi p (LVSW Edition 2007-02-23)
But... no voice dial...
Where i can download that? Or Cyberon Voice Commander?
Thanks in advance
Here are!
Here are cyberon....
lapix said:
Here are cyberon....
Click to expand...
Click to collapse
Thanks man!
Ur the man!
anonimo said:
Which new ROM? There are quite a few around now! If it's the dopod ROM then the Voice Speed Dial is not included and there is Voice Commander instead.
The latest cooked ROM (see thread in the other forum) should have all the HTC customisations so Voice Speed Dial should be there.
Click to expand...
Click to collapse
Which rom do you recommend? Cooked or Dopod?
btw, thanks for the info guys.
Related
Can anyone tell me what is the Cyberon Voice Dialer in the extended rom? The Cyberlink is not built into the rom which this build.
Mike
what is the cyberlink dialler, explain and post screenshots
thanks
Heh I meant the Cyberon Voice Speed Dial program that was previously built into the rom.
Anyone have Cyberon Voice Commander/speed dial after the trinity rom upgrade?
I already searched the Cyberon home page but i cant see any download section to the main program...
Any help?
Thanks in advance
Try this, latest UK release
This file seems to be the best version of Voice Commander
Thanks!
Downloading now!
Anybody has the original Cyberon Speed Dial? I have updated to dopod rom and Cyberon Voice Commander works very poorly for me, especially when I am outside
Try This one (thanks to Asukal).
10x
A big thanks for both of you!
thanks for sharing
Spanish Language Pack
Anyone have Cyberon Voice Commander Spanish Language Pack?
Thank you!
Looking for the german language pack. Anybody?
Thanks in advance.
Hi, i need voice commander cyberon ita, i may use in to my p3600, where I can find a cab to install and the tips for unistall cyberon voice dial preinstall in to my device. excused for my english
new version
shayd said:
Try This one (thanks to Asukal).
Click to expand...
Click to collapse
hi do you have new version?
Cyberon Voice Speed Dialer v1.2_build_61226
Install cab then import the registry settings
This should be a sticky with the number of times these programs get requested and then posted.
Or maybe a sticky of links to all the useful cabs. HTC_realplayer.... Smart-dialler....etc.
RebelShadow said:
Cyberon Voice Speed Dialer v1.2_build_61226
Install cab then import the registry settings
Click to expand...
Click to collapse
what is the need of importing the registry settings??
diezoo said:
Anyone have Cyberon Voice Commander Spanish Language Pack?
Thank you!
Click to expand...
Click to collapse
+1
Thanks
Mee too!anyone have it in spanish?
Thanks
Nicolas
Cyberon voice commander spanish
Any one have cyberon voice commander in spanish? Can't find it anywhere (i heve search in cyberon pages too).
Thanks in advance
Need help with Cyberon Voice Commander!
Camstech said:
This file seems to be the best version of Voice Commander
Click to expand...
Click to collapse
Hi there. Im new to this forum. I accidentally uninstalled voice commander...and reinstalled it thanks to ur cab file. Works perfectly except for one thing..previously in my HTC s710, the voice button on the left hand corner and my headset were configured by default to access voice commander. This is not happening now. Moreover, with this new cab application I'm not able to access either settings or the help file. It says one of the components is missing.
Thanx a lot for providing the Voice commander file, but can u help me solve this problem? I find VC very useful while driving...and its annoying to access it in any way other than the headset.
Thanx in advance!
In Spanish Pliz
Has anyone VC in spanish or do u know if there is a language pack available???
I'm using Vito voice 2 Go which offer more flexibility
where can I get Voice Command 1.6 cab?
Here's the place I found with a quick search...
He wants it free im sure. I have it but I cant attach it here for some reason
You mean this one ?
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
http://rapidshare.com/files/44070565/BT_fixed_MS_VC_1.60_WM6_8525.CAB
wpbear said:
http://rapidshare.com/files/44070565/BT_fixed_MS_VC_1.60_WM6_8525.CAB
Click to expand...
Click to collapse
does this fix the incoming announe issue?
silverzz28 said:
does this fix the incoming announe issue?
Click to expand...
Click to collapse
it is the MS VoiceCommand and with the BT Config 1.9f in one CAB.
http://forum.xda-developers.com/showpost.php?p=1161652&postcount=11
Install then set bt 5 to MS VC, then go to prog and run BT Voice Config and set as the thread above says..then SR.
Thanks but that still does not fix it on my end for wm6 version. my 8525 doesnt even have button 5. only goes to 4. I set it to the comm manger buttin which was 4. Also what setting are you putting the vc at in under phone and then options?
silverzz28 said:
Thanks but that still does not fix it on my end for wm6 version. my 8525 doesnt even have button 5. only goes to 4. I set it to the comm manger buttin which was 4. Also what setting are you putting the vc at in under phone and then options?
Click to expand...
Click to collapse
gett PTT Fix..depend on your ROM though. I think you have to have Bt 5 to make this work.
http://forum.xda-developers.com/showthread.php?t=317339
This is the rom I am using. Also I what is the ptt fix? I use my ptt everyday
silverzz28 said:
http://forum.xda-developers.com/showthread.php?t=317339
This is the rom I am using. Also I what is the ptt fix? I use my ptt everyday
Click to expand...
Click to collapse
I dont know if this will work if you actually use PTT button for PTT. I think you are out of luck.
You shouldn't have to use the PTT button to use VC1.6 - the only time I use the PTT button to trigger it is when I have it set to play audio files and I have the headset trigger disabled.
Instead of doing a soft reset, you have to Enable the BT Command and then POWER OFF and then back on. Otherwise the registry settings don't stick...
wpbear said:
it is the MS VoiceCommand and with the BT Config 1.9f in one CAB.
http://forum.xda-developers.com/showpost.php?p=1161652&postcount=11
Install then set bt 5 to MS VC, then go to prog and run BT Voice Config and set as the thread above says..then SR.
Click to expand...
Click to collapse
install unsuccessful.
How do I prepare my 8525 for the install?
Blk Satin
.9f cab
vc1.6
Thanx
zeddock
I installed this vc and it now works.
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
The vc button is number 3 on the 8525 att wm6 rom
silverzz28 said:
I installed this vc and it now works.
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
The vc button is number 3 on the 8525 att wm6 rom
Click to expand...
Click to collapse
So you had same problems and this fixed it?
Yes I had issues with it not saying the incoming call feature
silverzz28 said:
I installed this vc and it now works.
http://rapidshare.com/files/44098658/MSVC_1.60_WM6_8525.CAB
The vc button is number 3 on the 8525 att wm6 rom
Click to expand...
Click to collapse
I do not know why but THIS ONE WORKS!
Bluetooth (BT) no longer working twice!
Simple install too!
It is working on my flashed Satin. Hope same for the X version of Black.
zeddock
PS. Who is responsible for this great fix please?
zeddock said:
I do not know why but THIS ONE WORKS!
Bluetooth (BT) no longer working twice!
Simple install too!
It is working on my flashed Satin. Hope same for the X version of Black.
zeddock
PS. Who is responsible for this great fix please?
Click to expand...
Click to collapse
Hello there!
Is this an international version or just for english speaking? Does the WM6 mean it is for Windows Mobile 6? Is there a link to a german speaking version?
I know, many questions...
JueLue
Where can i find Voice Command for WM5.
VC1.6 will work on WM5 or 6. VC1.5 only works on WM5.
As for languages, do a google search - handandgo.com sells VC, but not sure of languages beyond English and UK English
Hello, i have a Tytn with Schaps rom 4.01.
I search a voice dialer because i'm not found in the rom!!!
Thanks
what the....
JUNK!!
blackout128 said:
what the....
Click to expand...
Click to collapse
ditto!! .
piouky said:
Hello, i have a Tytn with Schaps rom 4.01.
I search a voice dialer because i'm not found in the rom!!!
Thanks
Click to expand...
Click to collapse
Take a look for example here. Use a search function or Google next time.
Hi,
I have 2 Trinity's (from an auction) both with the same OS (WM 6.1).
On both I have installed Cybveron Voice Speed Dial 1.2. On one device it is working as aspected with a Bluetooth-Headset (voice dialing via headset). On the other device it's not working. Instead of starting the voice recognition the dialpad is shown.
I have found that there is no btagext.dll on the device that failed.
Unfortunately this file can't be copied (acces denied, I think because it's in ROM).
I have found some entries in this forum and others, but no download of btagext.dll.
For testing I have installed MS Voice Commander, but it's the same behaviour (dialpad is shown).
Now my questions:
- Can btagext.dll be the problem ? If yes, where can I download it ?
- Can anyone explain which 'modules' are involved in processing the voice dial via headset ?
Thanks
I had the same problem. Uninstall the Cyberon version you have, and try to install Cyberon Voice Speed Dialer v1.2_build_61226. After that you must repair the settings for hardware buttons, because this version mess them up. Worked for me.
vali_p33 said:
I had the same problem. Uninstall the Cyberon version you have, and try to install Cyberon Voice Speed Dialer v1.2_build_61226. After that you must repair the settings for hardware buttons, because this version mess them up. Worked for me.
Click to expand...
Click to collapse
This is the version I have installed. Settings for hardware buttons are ok.
Because it's the same with MS Voice Commander, I think it's not the Voice Speed Dialer.
Thanks
vali_p33 said:
I had the same problem. Uninstall the Cyberon version you have, and try to install Cyberon Voice Speed Dialer v1.2_build_61226. After that you must repair the settings for hardware buttons, because this version mess them up. Worked for me.
Click to expand...
Click to collapse
yes, after the buttons fix it works fine to me as well.
where can I download this from?
Try:
http://forum.xda-developers.com/showthread.php?t=295238&page=2