HELP! GPS not working..can not detect satellites - Touch Pro2, Tilt 2 Themes and Apps

my GPS isn't working after hard reset, it cant detect any satellites..i ran quick gps, but nothing...hard reset again..and nothing...any idea?? running tomtom 7.916.9189.1..

judicious said:
my GPS isn't working after hard reset, it cant detect any satellites..i ran quick gps, but nothing...hard reset again..and nothing...any idea?? running tomtom 7.916.9189.1..
Click to expand...
Click to collapse
Wait a long time before hard reset... Because it's new positioning for the GPS. Be sure that the place where you search the GPS is optimal for the first reception.
What is your SW version (Radio, rom,...)?

ROM: Fusion V5.2 Sense 2.1
Radio: 4.49.25.17'
it's weird because sometime it works when after hard reset and sometimes it doesn't

Having just started a new job where I am reliant on Sat Nav I must say I think the Sat Nav is absolutey ****ing terrible on this device. So much so that I'm forced to use my old Kaiser to find my way to clients.
If I'd known that I probably wouldn't have bothered buying this.
I know that doesn't help you, but when I saw this thread I just felt like a rant.
Hope you get it working again, as well as it can.

i run quick GPS before i run my gps app... and the new or latest radio helps as well..

Just put it by the window and wait upto 15 minutes. Both my Rhodium and my previous Kaiser always take ~10 minutes to get a lock the first time after a hard reset (even with QuickGPS). I don't know why, but it would seem it's quite normal so don't worry about it. If you're still not getting a signal after 15 minutes then head outside with no tall buildings and try again.

My touch pro 2 GPS sensor seems really sensitive to open sky. It can't pick up any satellite at all indoors.

i'm having the same problem! its weird and sorta annoying.
i have the latest Energy ROM Standard 21864 with the radio 4.49.25.17
can someone help with this problem?

Visual GPSce still works on the TP2, Tilt, WM 6.5.
http://www.visualgps.net/VisualGPSce/
It won't fix your problem, per se. But you can see if you are at least picking up satellites, and how well.
Connection settings in Visual GPSce are COM4, 4800 baud.

The most common problem for the GPS not working after a hard rest is "location on" settings. You must have your device set to LOCATION ON and not E911 ONLY.
go to START
click on SETTINGS
at the bottom click on ALL SETTINGS
at the bottom select tab PERSONAL
click PHONE
at the bottom select tab CDMA SERVICES
highlight LOCATION SETTINGS
click on GET SETTINGS
change to LOCATION ON
upper right select OK
Hope this was your problem and helps. Thanks

have you tried Advance Config Tool to make sure agps is enabled?
I enabled mine and get fast GPS locks, especially outdoors.
Just did a reset and got a GPS lock in 19 sec. while sitting in my room. It one if the thing a love about the Tilt 2 over my original Tilt.

DJ_SirG said:
The most common problem for the GPS not working after a hard rest is "location on" settings. You must have your device set to LOCATION ON and not E911 ONLY.
go to START
click on SETTINGS
at the bottom click on ALL SETTINGS
at the bottom select tab PERSONAL
click PHONE
at the bottom select tab CDMA SERVICES
highlight LOCATION SETTINGS
click on GET SETTINGS
change to LOCATION ON
upper right select OK
Hope this was your problem and helps. Thanks
Click to expand...
Click to collapse
i have tilt 2, and do not see any tab for cdma services or locatioin settings...not sure how to get to there..

judicious said:
i have tilt 2, and do not see any tab for cdma services or locatioin settings...not sure how to get to there..
Click to expand...
Click to collapse
same my phone is not cdma but my quick GPS says my location must be ON ?!?!?!?!?!?! how is that?

These threads helped me a lot. Turned my Tilt 2 from a crummy GPS to an acceptable alternative to a dedicated GPS device.
http://forum.xda-developers.com/showthread.php?t=524655
http://forum.xda-developers.com/showthread.php?t=523676

thanks..will post if anything crazy happen..
HKLM\System\CurrentControlSet\GPS Intermediate Driver\
Deleted Data for current and old log files
HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers\
InputBufferSize dropped to 1024 (DEC)
OutputBufferSize dropped to 1024 (DEC)
HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers\GPSOneDevice\
PollInterval dropped to 100 (DEC) this is MilliSeconds
Click to expand...
Click to collapse
I saw that in thte post...i wasn't able to do the first one...didn't quite get it..but tweaked with the other two..

This worked for me... can't believe I didn't think to check this. LOL. Thanks for the help!
DJ_SirG said:
The most common problem for the GPS not working after a hard rest is "location on" settings. You must have your device set to LOCATION ON and not E911 ONLY.
go to START
click on SETTINGS
at the bottom click on ALL SETTINGS
at the bottom select tab PERSONAL
click PHONE
at the bottom select tab CDMA SERVICES
highlight LOCATION SETTINGS
click on GET SETTINGS
change to LOCATION ON
upper right select OK
Hope this was your problem and helps. Thanks
Click to expand...
Click to collapse

Check this Out
judicious said:
thanks..will post if anything crazy happen..
I saw that in thte post...i wasn't able to do the first one...didn't quite get it..but tweaked with the other two..
Click to expand...
Click to collapse
I have another thread similar to yours, and I just solved my satellite problem.
there is a setting in your advanced network settings under the GPRS tab, one can choose from two options, either PAP or CHAP for connections settings. Mine was set to CHAP, I then changed it to PAP and biggity bam, the motherf***er worked. I also, tried different radios, but am fairly sure this was what fixed the problem. Give it a shot, maybe it will work for you too.

my gps also don't work since i have installed new rom on the phone. when i open camera and choose gps photo all i see s initializing gps but the process never ends.

Any luck yet
Haven't heard whether or not there has been luck trying my suggestion. I'm curious to see if anything came of it.

outerdepth said:
I have another thread similar to yours, and I just solved my satellite problem.
there is a setting in your advanced network settings under the GPRS tab, one can choose from two options, either PAP or CHAP for connections settings. Mine was set to CHAP, I then changed it to PAP and biggity bam, the motherf***er worked. I also, tried different radios, but am fairly sure this was what fixed the problem. Give it a shot, maybe it will work for you too.
Click to expand...
Click to collapse
GPS has zero to do with your GPRS settings.

Related

GPS cant be found by TT7

I have tried it several ways but I cant get TT7 to find my internal GPS antenna.
I cant find alot about this problem on google either.
The google maps installed on it finds the GPS and uses it, but TT7 and other nav software cant find it.
Anyone has any suggestions?
Perhaps you will need a 3rd party program to re-route the GPS information from the chip to TT7. GPS Gate does this. I haven't used TT7 on the HD just yet, so I can't give you any other information, sorry.
ballistykx said:
Perhaps you will need a 3rd party program to re-route the GPS information from the chip to TT7. GPS Gate does this. I haven't used TT7 on the HD just yet, so I can't give you any other information, sorry.
Click to expand...
Click to collapse
I think you are right. I had this problem too. The fix was to load NoniGPS and go to the advanced setup page, choose Com4 and your preferred data rate, save it. Switch to the home screen without closing the app then load TT7, it should lock on the satellites now. That worked for me and I haven't had the issue since. If you change TomTom versions again, the problem can come back.
Matterhorn said:
I think you are right. I had this problem too. The fix was to load NoniGPS and go to the advanced setup page, choose Com4 and your preferred data rate, save it. Switch to the home screen without closing the app then load TT7, it should lock on the satellites now. That worked for me and I haven't had the issue since. If you change TomTom versions again, the problem can come back.
Click to expand...
Click to collapse
TTN7 shouldnt need this. Have you gone in an checked the configuration within tomtom. Using the setting "internal gps" works fine, however you could also manually configure to com4 and 9600 baud.
have you at any point played around with "external gps" settings on the device?
to be honest yes I have been playing around with "external GPS", and later on I saw a warning on this forum that could mess up your GPS settings.
I will try the other advises and if not a hard reset and start over and see how it turns out.
But I thank you all for the info, I keep you posted on the progress
Gogem said:
to be honest yes I have been playing around with "external GPS", and later on I saw a warning on this forum that could mess up your GPS settings.
I will try the other advises and if not a hard reset and start over and see how it turns out.
But I thank you all for the info, I keep you posted on the progress
Click to expand...
Click to collapse
Did you try doing a reset with the red button behind the cover instead of long press on button? Too easy I know, just checking.
Oke I fixed it, and yes I did it with a Hard Reset. It seems that "External GPS" screws up all your settings, havent touched it since the reset installed TT7 again and it works perfect.
So to all new users of Touch HD, DO NOT USE "EXTERNAL GPS"!!!
If you did and TT7 cant find your GPS device, use the "Hard Reset" to regain control over your GPS device.

gps on HTC Ozone

How do I get the gps to work on the htc ozone (on vzw)? I have location set to on in the phone settings, but google maps will only get me within 1500m (using tower info or sthing), and Garmin XT Mobile wont work at all.
Any help is appreciated
did u update ur quick gps?
ive been able to get a steady lock within 50m three in the last 2 min. ( fastest ever ive seen on a htc device before BTW )
I just redownloaded it to see if anything would change. Nothing.
are u sure u have an active data connection?
and did u go thru ur googlemaps options to be sure that it can auto update/lock?
nevermind... I just read the whole thread..
jtraveler said:
nevermind... I just read the whole thread..
Click to expand...
Click to collapse
ive tried just about everything i kno to do ..
i even tried to duplicate the issue and i was unable too.
o.p.
my bad that i couldnt help..maybe someone else can guide u here?
My own idiocy.. I got it working...
I was configuring it while it was hooked to my computer (for troubleshooting purposes)... in my basement. It was just out of range of a satellite. as soon as i went upstairs and outside it was working fine.
Thanks
Edit: Nevermind!
justlevine said:
How do I get the gps to work on the htc ozone (on vzw)? I have location set to on in the phone settings, but google maps will only get me within 1500m (using tower info or sthing), and Garmin XT Mobile wont work at all.
Any help is appreciated
Click to expand...
Click to collapse
In Google Maps, make sure that in Menu>Options>(2)GPS Settings you have the "Managed by Windows" radio button selected. Then in regular maps hit Menu>0 (or just "0" on a clear map.) It might take a few seconds to spool up some satellite connections.
Without the "Managed by Windows" selection mine has no clue where I am. Also try to use "Quick GPS" within the start menu to help with satellite location information.
I can't remember if I had to change that setting when I first installed or not. I just remember that it's there. On my Ozone GPS seems to work excellently in all programs. Bing and GCZII(geocaching) are the others that access my GPS.
Hope that helps!

Navigator demands data connection at start

Hi all,
firstly the software situation:
I have an HTC Touch Diamond2 wit a german Vodafone branding. Last week i installed the new official upgrade for german Vodafone devices - ROM version 2.16.162.1 HTC Touch Diamond2 (Voda_ DE).
With the old ROM and WM Version i didn't have this problem. Now - with every start of my TomTom Navigator after about 10 seconds a data connection is started. If there's wifi around - wifi, if not - mobile service. When i switch off the connection it stops and for some minutes - until i turn off the navigator it remains switched off. I haven't tested if during some time of the navigation it is turned on again.
In other discussions other users (with other navigation software) have also affirmed, that they also get an unwanted data connection.
Since then i have tried everything that i could think of. I looked over every setting in the TomTom software. Tried over TomTom Home. Tried reinstalling TomTom. Tried resetting to factory settings of TomTom. Nothing helped.
I then made a couple of hardresets of the device and i formatted the memory card also a couple of times. I then installed everything fresh - still demands data connection.
I then tracked the connections with a trafficmonitor software - one time wifi connection, one time mobile service ceonnection.
Looks like this:
WiFi:
system : 3.5 K
WZCSVC.dll : 1.2 K
mobile connection:
system: 1.2 K
WZCSVC.dll is Wireless Zero Configuration Service and i can at least understand why it is making traffic, since wifi is in use.
What is "system"?
Also - why more traffic for "system" with wifi than with mobile connection?
Yesterday i also tracked the connection and there was another .dll service which name i unluckily didn't mark. But it was gps*something*.dll.??
Could AGPS or Quick-GPS have something to do with this behaviour? Or the My Location service? I disabled and declined every setting that i could discover for those services, but i may have overlooked something?
Any ideas?
Please HELP!
Any suggestion would be appreciated!
Thanks in advance!
Problem solved (looks like it at least).
After installing HD Tweak and disabling A-GPS no data connection starts with starting the navigator.
Glad you solved your issue, but let me witness that in my case (i have A-GPS ON) when i use tomtom (7.916.9189) no data connection is going on. Anyway,just to be sure to keep your problem under control, i advice you to check also the weather update settings.
san.medius said:
After installing HD Tweak and disabling A-GPS no data connection starts with starting the navigator.
Click to expand...
Click to collapse
A little worrying. I am off to Amsterdam tomorrow and want to use TTN7 without getting stung for a data connection.
sualc said:
Glad you solved your issue, but let me witness that in my case (i have A-GPS ON) when i use tomtom (7.916.9189) no data connection is going on. Anyway,just to be sure to keep your problem under control, i advice you to check also the weather update settings.
Click to expand...
Click to collapse
If you mean the two options which appear directly when the HTC Sence Weather Tab is opened - "update weather automatically" and "update with roaming" - i've checked them many times - they are off. If there is another setting where they can be adjusted i would appreciate it if you told me where and how. But i don't think this is it. Unless TomTom Weather is doing this.
But as i mentiones - there was a gps*something*.dll file, that caused the data transfer - that's why i thought it is something GPS related.
But I wouldn't mind to use another solution because now i think my gps signal is not that strong (at least in buildings).
Do you have 6.5 also? I don't think it could be a ROM thing?
A little worrying. I am off to Amsterdam tomorrow and want to use TTN7 without getting stung for a data connection.
Click to expand...
Click to collapse
As far as i could test it it makes the connection just once after starting the navigation. It doesn't keep pulling data the whole time. If it does it the whole time during a navigation - i don't know, haven't tested it.
But you can at least test it quickly before travelling - navigation on - status check. If something's moving - you have a problem.
There is one simple solution - you can either disable all automatic connection types - then you would't be able to surf the internet. In my case i didn't want to have to disable everything and/or to enable it by hand every time i use the navigator.
Or you can install HD Tweak and disable A-GPS. It's really very easy.
http://montecristoff.webs.com/hdtweak.htm
san.medius said:
Or you can install HD Tweak and disable A-GPS. It's really very easy.
http://montecristoff.webs.com/hdtweak.htm
Click to expand...
Click to collapse
Thanks. I installed that and it seems that A-GPS is disabled by default. And it doesn't seem to get switched on by TTN7. Now I can wander the streets of Amsterdam without a worry
Mike Austin said:
Thanks. I installed that and it seems that A-GPS is disabled by default. And it doesn't seem to get switched on by TTN7. Now I can wander the streets of Amsterdam without a worry
Click to expand...
Click to collapse
Without A-GPS enabled make sure you don't enter the wrong coffeeshop!!
By the way..Also TD2 Tools and Tom's Topaz Setting Tool can enable/disable A-GPS and are more specific for our devices...your choice...and have a nice trip
sualc said:
Without A-GPS enabled make sure you don't enter the wrong coffeeshop!!
By the way..Also TD2 Tools and Tom's Topaz Setting Tool can enable/disable A-GPS and are more specific for our devices...your choice...and have a nice trip
Click to expand...
Click to collapse
Hi,
have you tested HD Tweak? I'm just asking for comparison reasons. I used it just because someone said it worked.
If the other two are more suitable for the Topaz i would of course prefer them. Is there "a better one" comparing the two?
P.S. Following question just entered my mind. If i uninstall the other tweak software what happens with the changes i made with it. I mean i guess it changes values in the registry so that the settings are changed? I suppose everything will stay as the software "left" it before being uninstalled?
I use HDTweak to increase overall sound volume only. I had it installed for months in a previous config and I was quite happy with it, but the specific tweak apps look more friendly to me. I guess that if you uninstall hdtweak without restoring the default settings you will keep the tweaks applied..at your own risk

No GPS sat lock

I've had the imagio for about 2 weeks not. and can't get the GPS to work. I've tried every reg edit I can't find. Tried useing GPSID.dll rather then GPSID_HTC.dll. I tried installing the GPSModDrivers. Ran QuickGPS. Done Hard resets and half a dozen flashes. Nothing. The only program that works in Verizon's VZ Nav. TomTom, Google maps, Bing never get any sat lock. I'd say it was my phone but my dad's and the floor model at our Verizon store all have the same problems. The guy at Verizon said it was an issue with a lot of them and HTC was working on an updated rom for it. But that could be crap. Any ideas?
You probably have a faulty unit - my GPS always locks pretty quickly.
Agreed. My GPS works flawlessly. I use it all the time with TrackMe.
Never had the first problem with the GPS , works great with Google and Bing maps. Yours Dad's phone must be defective , swap it out for a new one.
Just wondering...
Start/Settings/System/External GPS on Access tab, did you marked
"Manage GPS atomatically (recommended)
If you don't do this, have you tried setting the Com Port Manually? I have a felling that if VZ works that is just a configuration issue.
As a last resource, you could use a terminal program like Token2Shell Mobile (free 30 Trial) to read the Com port "Usually Com4" and 4800 Baud and check the NMEA string coming in, here is a example from mine.
$GPGGA,204838.8,2949.9400,N,09532.6595,W,1,08,1.20,19.00,M,-2.00,M,,*56
$GPRMC,204838.8,A,2949.9400,N,09532.6595,W,21.60,268.00,021109,,*27
$GPGLL,2949.9400,N,09532.6595,W,204838.8,A*22
$GPGSA,A,3,02,04,05,09,10,12,17,27,,,,,2.60,1.20,2.40*08
$GPGSV,3,1,10,12,45,313,30,04,55,028,25,10,31,174,24,02,69,293,21*72
$GPGSV,3,2,10,09,21,243,21,05,24,182,21,17,27,080,20,28,03,143,16*7F
$GPGSV,3,3,10,27,19,237,14,30,11,319,14*7B
The bold is the amount of Satellites, in this case 8
Hope this gave you some ideas, let us know if it works for you...
Sorry for the double post working from device.
Keep in mind that some of the things you may have installed to correct the issue may have negatively affect registry settings, sync your contacts and do a hard reset on the device. And do not set up VZ nav when you bring it up.
Then do this:
Install Google maps
Make Sure your Location Setting is "on" in the phone settings. If it is on then toggle it to "911" hit okay on upper right corner then go back into it and toggle it back on and hit okay.
Soft Reset and let boat up completely
Open Google Maps And make sure USE GPS is not checked.
Click "X" in top corner to let it run in the background
Run Quick GPS and select "Download"
Open Google Maps again and select "USE GPS" make sure you have a clear view of the sky and it should take less than one minute to lock
Sometimes a soft reset is required to get a gps lock.
Actually, It is a known issue with the particular gpsone chipset. It's an issue with location caching with agps, but this phone comes stock with agps disabled. However, I have not heard that many complaints on this forum, of course not everybody uses gps. If you soft reset before you try and use you shouldn't have issues. Trust me this is my third HTC touch series phone with this issue (diamond, touch pro, imagio). With my imagio it suddenly stopped having this issue, wierd. I used to use a program called HTC gps tool on my touch pro that would clear the cache for you without having to soft reset each time you might want to do some searching, not sure if it works with wvga screens.
bastukee said:
Just wondering...
Start/Settings/System/External GPS on Access tab, did you marked
"Manage GPS atomatically (recommended)
If you don't do this, have you tried setting the Com Port Manually? I have a felling that if VZ works that is just a configuration issue.
As a last resource, you could use a terminal program like Token2Shell Mobile (free 30 Trial) to read the Com port "Usually Com4" and 4800 Baud and check the NMEA string coming in, here is a example from mine.
$GPGGA,204838.8,2949.9400,N,09532.6595,W,1,08,1.20,19.00,M,-2.00,M,,*56
$GPRMC,204838.8,A,2949.9400,N,09532.6595,W,21.60,268.00,021109,,*27
$GPGLL,2949.9400,N,09532.6595,W,204838.8,A*22
$GPGSA,A,3,02,04,05,09,10,12,17,27,,,,,2.60,1.20,2.40*08
$GPGSV,3,1,10,12,45,313,30,04,55,028,25,10,31,174,24,02,69,293,21*72
$GPGSV,3,2,10,09,21,243,21,05,24,182,21,17,27,080,20,28,03,143,16*7F
$GPGSV,3,3,10,27,19,237,14,30,11,319,14*7B
The bold is the amount of Satellites, in this case 8
Hope this gave you some ideas, let us know if it works for you...
Click to expand...
Click to collapse
I concur if it was a hardware issue VZ nav wouldn't work.
Sweeny Russ:
I being looking for a program to manage the GPS chipset, I use many kinds of GPS devices for work and it would be the first time I see a GPS device I can't program/manage. Gpsone chipset is the GPS on board device? Do you have a link for this HTC GPS program? I wonder if I can actually program with it...worth asking
One of my friends had the same problem as you mentioned. I asked him to do a hard reset and after a HR, the GPS has been working smoothly. Please try a HR!
I have no complain about my Imagio's GPS because it works much more than I expected. I can get 7-8 sattelites fixed in house, near the window where my old phone Touch HD could not fix any sattlelite.
I'm about to try bastukee suggestion. Giakhoa are you saying do a hard reset after a hard reset?
bastukee This is what I got, any ideas?
$GPGGA,,,,,,0,,,,,,,,*66
$GPRMC,,V,,,,,,,,,*31
$GPGLL,,,,,,A*11
$GPGSA,A,1,,,,,,,,,,,,,50.00,50.00,50.00*35
bastukee said:
Sweeny Russ:
I being looking for a program to manage the GPS chipset, I use many kinds of GPS devices for work and it would be the first time I see a GPS device I can't program/manage. Gpsone chipset is the GPS on board device? Do you have a link for this HTC GPS program? I wonder if I can actually program with it...worth asking
Click to expand...
Click to collapse
Let me know how this pans out. I haven't used this new version but it will allow you to play around with some setting my gps locks instantly so I'm not going to mess with it I just now it works on vga, you might need a screen rotate app to read all settings.
Original Post where I found it is here
Sweeny, Program works nice. it's an easier way to see the data then the program bastukee gave me. But sadly I don't know what half the options do and it still gives me the same date I posted in #12. Thoughts anyone?
That's exactly what you would get when satelites are not being seen, in fact you can't even see a Clock. Once I finish this 3 day trip to India and settle I will try that program and see how my settings look like and post screenies. "I'm a zombie atm"
Thanks for the help. I'm going crazy trying to get this to work.
While bastukee is on his trip, anyone else have any ideas?
hackthis02 said:
While bastukee is on his trip, anyone else have any ideas?
Click to expand...
Click to collapse
be sure ur using com port 4
There's where I got the data that matched the data bastukee showed me. And the one in the settings.
I might be pointing out the obvious but, did you try this outside? After like a minute?

GPS/location issues?

Hi folks,
I encountered problems with the location service of the Omnia7.
At first, A-GPS is working very rarely -most of the time I don't get a location until the real GPS finds a signal (that means I get no location indoors).
Second, the GPS doesn't find the right location. In 9 out of 10 tries, the GPS thinks I am somewhere in the Czech Republic (which is about 600km away). This bug occurs in Bing Maps as well as in WeatherBug.
Very rarely I get the right location but most of the times it's completely off -but it's always the same "off", so I think there must be something wrong with the GPS module or the software.
So I can't use the phone to navigate or as a sports tracker.
I wrote the Samsung Support today, hope they have an answer.
I hope for you guys to confirm or deny this issues.
skycamefalling said:
Hi folks,
I encountered problems with the location service of the Omnia7.
At first, A-GPS is working very rarely -most of the time I don't get a location until the real GPS finds a signal (that means I get no location indoors).
Second, the GPS doesn't find the right location. In 9 out of 10 tries, the GPS thinks I am somewhere in the Czech Republic (which is about 600km away). This bug occurs in Bing Maps as well as in WeatherBug.
Very rarely I get the right location but most of the times it's completely off -but it's always the same "off", so I think there must be something wrong with the GPS module or the software.
So I can't use the phone to navigate or as a sports tracker.
I wrote the Samsung Support today, hope they have an answer.
I hope for you guys to confirm or deny this issues.
Click to expand...
Click to collapse
Used bing maps few times already and never got a problem with them.
My wifes omnia is getting fix in about 2minutes still or even 10 when I am on the move.
Omnia on the other hand is getting my location very quickly (I have location turned on). Last time on halloween noght we were lost at some suburban area and my phone get us from there very accurately. I could see us moving like on proper sat nav application. I know we have to wait a little bit for nice TomTom or iGo.
Second hard situation, I got my location today at work (under roof) where HTC HD was getting signal only standing close to window. It is ok for now if u ask me.
No Problems Here...
Hi there,
I am getting "room level" accuracy all the time. If I am at home in the bedroom, Bing maps on maximum zoom in shows me in the bedroom. If I am on the other side of the house in the living room, it shows me in the living room.
Seems perfect to me.
Cheers,
Pete
Thanks for your replies...
...the strange thing is, it seems to be working now (for 1 day it's fine). I have played around with the Diagnostics menu (GPS-settings) and since that it's okay as expected. Maybe it's just a coincidence, but I hope it's staying like this.
I also have problems with my Omnia 7 : the map is very imprecise (the gps apps indicate a 3000m precision) so I think it doesn't manage to get a fix and use 3G triangulation instead. I tried waiting for about 30 minutes outside, but nothing changed. The weird part is that it started working at same point, for a few days, and then broke again. I have no clue about what's happening.
I'm pretty sure I had those problems before discovering the diagnosis menu, but in case I tweaked something I shouldn't have, can someone (with a working gps) give me his settings ?
The "Test Mode" menu can be called by dialing *#1575# in the diagnosis app. Then there's three options in the "Change state" menu.
Thanks in advance.
MOLR CP/UP: CP MOLR state
3G MOLR request type: LocEstimate type
TLS Option: Unknown TLS Session
Thanks, my settings were completely off. I hope it will work now
KooKiz said:
Thanks, my settings were completely off. I hope it will work now
Click to expand...
Click to collapse
Did it actually work?
Yes it did. It works perfectly now
Sent from my OMNIA7 using XDA Windows Phone 7 App
hello, MAPS app onmy omnoa dont really fınd ny locatıon ıt just analys and so on,, so shld ı set sum dıffrences ın dıagnosıs menu.. may u help pls..
KooKiz said:
Thanks, my settings were completely off. I hope it will work now
Click to expand...
Click to collapse
I was having the same issue. My settings were off as well. My device was set to UP MOLR state vice CP MOLR state. How does that happen? When I was on NoDo, the GPS was working great.
skycamefalling said:
MOLR CP/UP: CP MOLR state
3G MOLR request type: LocEstimate type
TLS Option: Unknown TLS Session
Click to expand...
Click to collapse
This helped me too. Thanks o/
edit:
Again the same problem, but this time after flashing custom rom. And this time TLS option ''Unknown TLS Session'' is missing... Any help?

Resources