Related
GPS problems
Ok so I have a North American GSM x9501...
Never used the GPS (Telenav isn't available to Canadian residense). This device is unlocked and NOT purchased from Rogers...
Downloaded Google maps, tried to use GPS and it wouldn't work. Set the settings manually Com4 57600 baud... It says searching for satalites, and has some HUGE number (54357734578) in brackets... GPS doesn't work.
Installed the HTC GPS tool, looks like GPS data is coming in, but can't get a fix. Then tried to use GPSgate, and it says GPS data is coming in but cannot get fix. Both of these two apps can't find any satalites.
Does anyone know what is up?
Zhariak said:
GPS problems
Ok so I have a North American GSM x9501...
Never used the GPS (Telenav isn't available to Canadian residense). This device is unlocked and NOT purchased from Rogers...
Downloaded Google maps, tried to use GPS and it wouldn't work. Set the settings manually Com4 57600 baud... It says searching for satalites, and has some HUGE number (54357734578) in brackets... GPS doesn't work.
Installed the HTC GPS tool, looks like GPS data is coming in, but can't get a fix. Then tried to use GPSgate, and it says GPS data is coming in but cannot get fix. Both of these two apps can't find any satalites.
Does anyone know what is up?
Click to expand...
Click to collapse
yep, go out in middle of a field or open Terrace or any place where you can see the sky above you head directly and then start google maps with GPS or HTC GPS tool or GPS gate etc , wait 3-5 min and then it should have fix...
cheers
I've given is some time... Probably over 5 minutes...
It's just odd, I have lots of experiencing using GPS software and devices. It looks like it should be working, the only odd behaviour is:
1) It finds no satalites
and
2) Google Maps says "Seeking Satalites (3874732644)" which is odd, because theres not that many GPS satalites, lol.
Change the Baud Rate to 9600 and see whether it will work.
Tried different baud rates.
Yesterday I let it sit for 15 minutes on google maps until finally it said there was no reception...
And I know I have reception because I was outside. Both my TytN II and HP iPaq have no trouble aquiring fix's...
download free VISUALGPS CE and install. Then connect it to COM4 and press start.
See the NMEA log monitor section. You should see lot's of data, if not, your GPS might be bad.
I'm unsure if your 9501 will work with the ROM's we use in Europe to make calls, and have GPS enabled.. If it's OK, I would flash Thai Hugo's Age of Reason and check again your GPS.
I'm using the factory ROM for the X9501 (Which does support GPS off the bat).
I used the HTC tool, and it looked like NMEA data was going through...
Zhariak said:
I'm using the factory ROM for the X9501 (Which does support GPS off the bat).
I used the HTC tool, and it looked like NMEA data was going through...
Click to expand...
Click to collapse
On the HTC tool there is option to see the satellites , check if its has any satellites on red color, if so keep the shift out in terrace or garden until 3 satellite color changes to green , have patience....
if it does not show any satellite on the HTC tool then probably you need to flash the rom with some new rom from the forum ..
Before you do that make a copy of your Stock/original rom ..see forum for instruction
PS: Since you have the stock / orginal rom X9501....would you do me a favour and check if you connect to head set and on Windows mobile side WM6, can you record a message and then play back and you can hear your self back .... I wanted to know if the mic works with head set on WM6 side...for the Stock 9501 ROM.
Cheers.
shawankit said:
On the HTC tool there is option to see the satellites , check if its has any satellites on red color, if so keep the shift out in terrace or garden until 3 satellite color changes to green , have patience....
if it does not show any satellite on the HTC tool then probably you need to flash the rom with some new rom from the forum ..
Before you do that make a copy of your Stock/original rom ..see forum for instruction
PS: Since you have the stock / orginal rom X9501....would you do me a favour and check if you connect to head set and on Windows mobile side WM6, can you record a message and then play back and you can hear your self back .... I wanted to know if the mic works with head set on WM6 side...for the Stock 9501 ROM.
Cheers.
Click to expand...
Click to collapse
Yes the Mic works, I helped Comonex with some testing to find out which radio firmwares supported the Mic.
Yes I can record/playback on the Windows Mobile side, and Yes skype works, etc....
Zhariak said:
Yes the Mic works, I helped Comonex with some testing to find out which radio firmwares supported the Mic.
Yes I can record/playback on the Windows Mobile side, and Yes skype works, etc....
Click to expand...
Click to collapse
Did you find satellites on your GPS Tool ? either red or green in color ?
Thanks for letting us know that the head set works on wm6 side ....
shawankit said:
Did you find satellites on your GPS Tool ? either red or green in color ?
Thanks for letting us know that the head set works on wm6 side ....
Click to expand...
Click to collapse
No problem.
Like I said, zero satelites...
Zhariak said:
No problem.
Like I said, zero satelites...
Click to expand...
Click to collapse
Can I ask another favour , do you have any registry editor installed on you shift.
if so , can try to dump/export the registry settings for HKLocalMachine (HKLM) to a xml ot reg file and then copy / upload the xml/reg file here .
we want to use head set with X9500 shift and are trying to find a solution , may be its a reg setting that can fix the problem.
Appreciate your kind help
shawankit said:
Can I ask another favour , do you have any registry editor installed on you shift.
if so , can try to dump/export the registry settings for HKLocalMachine (HKLM) to a xml ot reg file and then copy / upload the xml/reg file here .
we want to use head set with X9500 shift and are trying to find a solution , may be its a reg setting that can fix the problem.
Appreciate your kind help
Click to expand...
Click to collapse
I thought all the issues were fixed with the Shift's and headset usage?
Zhariak said:
I thought all the issues were fixed with the Shift's and headset usage?
Click to expand...
Click to collapse
Nope , the issue is we cannot use the head set in WM6 as the mic on Head set does not work....so we have to use the speaker phone and its not good for phone calls private or business.
I would appreciate if you can help us to resolve the issue , if you can dump the reg keys for HKLM / Drivers/inbuilt ... it might give us some direction.
Appreciate your support.
hi everyone ! can anyone tell me how i can use Google Maps with Gps technology ?? when i select "Use GPS" it says "Network Unavailable"
You're connected to the Internet?
An activated GPRS, EDGE or UMTS is necessary.
sharax said:
You're connected to the Internet?
Click to expand...
Click to collapse
no i'm not !
Dnst said:
An activated GPRS, EDGE or UMTS is necessary.
Click to expand...
Click to collapse
you mean if i want to browse maps with gps, i have to connect to the internet ??
Oh yes the maps are not on your device they are downloaded!!
Google Maps gets your location from the GPS sensor, but then has to go online to download the actual map data for that area.
so if the map of the area we are in, was downloaded befor then i think there wont be any problem ! i think it would be just like the quick gps software in diamond ! am i right ?
I think that should be a way of download the map and use it offline. Some cracker should make it easy
diogoperas said:
I think that should be a way of download the map and use it offline. Some cracker should make it easy
Click to expand...
Click to collapse
hehe, i tried 5 different apps and currently use gpsVP /w cached Gmaps imgs
pretty good for a free app, altho not totally easy to set up as there is no info...
since there is no maps for japan that i know of, never tried a commercial product, then again i prefer gmaps and my brain for navigation
diogoperas said:
I think that should be a way of download the map and use it offline. Some cracker should make it easy
Click to expand...
Click to collapse
in the last few versions of gmaps just install it onto the storage card and then you can just save whats in the applicationdata\googlemaps folder and use that offline
Dnst said:
An activated GPRS, EDGE or UMTS is necessary.
Click to expand...
Click to collapse
Can also be Wifi.
hey everybody, first post here....
i read that i should not start new posts if theres one going already.
I got my diamond about a month ago, its an alltel cdma diamond with original ROM, no registry tweaks, pretty much stock.
the GPS is being finicky. ive tried atleast 10-15 different GPS applications (all freeware or trials) and they are alway hit or miss. sometimes i get a 6-12 sat lock in seconds, even indoors... but sometimes i cant lock on outside even after 15min or more (even if i had a lock on less then 8hrs earlier). Ive been trying to find a pattern to why it sometimes works (certain settings, maybe after a resets, quick gps, etc)
side note, i used the G-Watch app while in poland where i have no phone coverage. it worked perfectly everytime i turned it on with almost instant lockon. but back in florida every program i try sometimes works and sometimes doesnt, even if i turned the phone to airplane mode.
question 1- is this considered normal for the alltel diamond
question 2- does the software that costs money (ie tomtom) work any better/more consistently
question 3 - could there be something wrong with my phone
question 4 - any ideas how to make it more stable
thanx for the help
also, on some of the gps programs, it will say i have found up to 8 or so sats, but wont lock onto any of them...
thanx again
Dear forum users,
I'm a happy user WM6.5 with TF3D 2.1. The weather at my location is updated nicely, however there's 1 issue I don't understand:
When I look at my home screen it still says 'My Location' instead of the city name where I live in (Ho Chi Minh city)...this is different from many screenshot I've seen on this forum where weather forecast city names are displayed nicely on home screen.
does anyone have an idea how I could fix this?
Thanks in advance for any ideas/support.
Best regards,
Nghia
Hi there,
I'm having exactly the same problem. The weather tab just stays at 'My location', as does the home tab. I've manually added the city I live in to display the weather, but I'd like to know how to get the phone to automatically detect it. Any help?
I had this problem too and tried lots of fixes I read about here and none of them worked. Then I tried going into my phone settings and changing my phone from "auto" in the Network field to "manual" and then selecting T-Mobile. I'm thinking it was finding AT&T and not being able to determine my location.
Settings>Personal>Phone>Network>Network Selection
After doing this and restarting the phone (airplane mode on/off) it detected "My Location" on the weather tab and then on the clock. I'm in SW Florida and am new to T-mo so i don't know if this will have any undesirable effects.
Not sure if this will affect my roaming, but I don't really roam much so I should be ok. See if it works for you guys.
Hi cocytan,
Could you tell me how to add city manually? My city is not listed in weather list of my phone. I have att, touch2 came from tmo unlock. When I try to update, it said something about not able to connect to dns and web2go.
Thanks.
Same problem here with Blackstone ROM
RUU_Dutty's_HD_WM6.5_5.2.23016.5.0.3_Leo_R5.zip
Update Radio to
HD_Blackstone_Radio_1.14.25.24
Can't get My Location to work...
Did you guys try my tip of manually selecting your mobile carrier in settings>phone>network and set it to manual and then select your carrier? I tried everything before this, and it's worked on every ROM I tried it on.
You can always set it back to automatic if it doesn't work or impacts your roaming.
I'm just curious if others see this fix working, then maybe we can collectively figure out why it's happening to us (is it location, carriers, ROM versions, etc.)
-Joel
Hi a042349,
manually selecting the carrier didn't work for me.
But I read somewhere else that it could work when you enable Wifi.
Doesn't need to be connected, just enabling should do the trick.
And it worked for me!
I tried the wifi trick and it didn't work for me. All my testing was done at my house with only my wifi in range (I live in the country) and it didn't matter if I was using it or not - no MyLocation data until I manually selected T-Mobile.
I'm on T-Mobile in Cape Coral FL - are you on Tmo too? Did you try driving around to pick up different cell towers? As I said all my testing has been at hoime, so not a lot of "variety" in what it could pick up over the air.
-Joel
Hi Joel,
I am on T-Mobile, but it's over here in Germany...
I didn't try different cell towers.
Looks like you have to try both, when encoutering the problem.
Is anyone here who tried both and it still didn't work?
If u change system lang on registry, it´ll work.
Mui lang=0XXX
Cheers.
i tried all of your suggestions but nothing helped it worked one time but since then ...
Gotta say i've only ever had it working once, and even then it was very inaccurate (brought up somewhere about 20 miles away).
I've tried every radio, manual network selection, turning 3g off, i also had to add my own town into the database and nothing works.
Using google maps with wifi, 3g, grps it finds my location to with in 500 metres, with gps it's spot on, so i know that aspect of it works.
However using the weather my location, it rotates between 3 different locations (One is about 1 mile away and the other 2 are about 5 miles away). It'll bring up the name, but always gives me the "There was a connection error while attempting to download weather data. Retry?" message.
so i'm at a loss as to how to get this working.
My location is working for me, i'm using the tmob radio(not the one in my sig but it worked with that one too) its showing a village about a mile from me, and the same on my wifes Hero-Stock ROM. all ive done is load latest Google maps and wait for it to find my location then exit, go to weather tab and select download weather automatically then back, a screen appears to accept google data download, accept then it works,
it seems my location is only as accurate as google maps as it uses the tower positions around you to triangulate you approximate position, when i'm in a town or city it shows that place. i dunno what else to suggest changing my radio helped. i'm not using 3g, maybe that helps?
ark666 said:
If u change system lang on registry, it´ll work.
Mui lang=0XXX
Cheers.
Click to expand...
Click to collapse
Interesting
Which setting for syslang would I have to use?
I am in Germany, but my Windows Mobile is English.
osrix25 said:
My location is working for me, i'm using the tmob radio(not the one in my sig but it worked with that one too) its showing a village about a mile from me, and the same on my wifes Hero-Stock ROM. all ive done is load latest Google maps and wait for it to find my location then exit, go to weather tab and select download weather automatically then back, a screen appears to accept google data download, accept then it works,
it seems my location is only as accurate as google maps as it uses the tower positions around you to triangulate you approximate position, when i'm in a town or city it shows that place. i dunno what else to suggest changing my radio helped. i'm not using 3g, maybe that helps?
Click to expand...
Click to collapse
I've tried doing everything the same as above and no dice.
Like i said google maps my location feature is pretty accurate for me.
Using google maps with wifi, 3g, grps it finds my location to with in 500 metres, with gps it's spot on.
Sorry i can't help any further..its weird, i'm running At0ms 3.7 but i'm sure it also worked for me on previous builds,
i think on earlier builds i had to also switch data connection on in comms so it stays on - Actually i think this might be be key as i think My Location has trouble calling the data connection which is where your error message is coming from. i hope it works for you.
As you're on Vodafone you could try this reg setting for Agps i don't think it will make any difference but it may do..if nothing else there good settings!
osrix25 said:
Sorry i can't help any further..its weird, i'm running At0ms 3.7 but i'm sure it also worked for me on previous builds,
i think on earlier builds i had to also switch data connection on in comms so it stays on - Actually i think this might be be key as i think My Location has trouble calling the data connection which is where your error message is coming from. i hope it works for you.
As you're on Vodafone you could try this reg setting for Agps i don't think it will make any difference but it may do..if nothing else there good settings!
Click to expand...
Click to collapse
yeah it worked on fusion 3.5 but hasn't worked for me on any other rom.
TVM for the reg settings, i'll give them a whirl.
I've tried everything listed here and am unsuccessful on TF2D 2.5.
Does anyone have the original 2330fc3c_manila file they can upload from 2.5?
Thanks.
Bruce Inman said:
I've tried everything listed here and am unsuccessful on TF2D 2.5.
Does anyone have the original 2330fc3c_manila file they can upload from 2.5?
Thanks.
Click to expand...
Click to collapse
I a running shadowline's 23064 build with 2.5.19133431. I was unable to get the location stuff working as well. I turned on all the location settings through SenseUI, but no go. I enabled Assisted GPS through Advanced Config (not sure if that is relevant). Still no go. I allowed my phone to connect up to my home WiFi, and instantly, it recognized my location as Seattle.
Not sure if it will work for others, but it worked for me.
DotNetDev said:
I a running shadowline's 23064 build with 2.5.19133431. I was unable to get the location stuff working as well. I turned on all the location settings through SenseUI, but no go. I enabled Assisted GPS through Advanced Config (not sure if that is relevant). Still no go. I allowed my phone to connect up to my home WiFi, and instantly, it recognized my location as Seattle.
Not sure if it will work for others, but it worked for me.
Click to expand...
Click to collapse
That worked for me at my home in Germany.
Now I am in Italy on holidays.
Same infrastructure here. Working WiFi, too.
But it doesn't do the trick here.
My phone still thinks my location is Germany and any updates just fail.
Think, I am giving up with this build.
I've had the imagio for about 2 weeks not. and can't get the GPS to work. I've tried every reg edit I can't find. Tried useing GPSID.dll rather then GPSID_HTC.dll. I tried installing the GPSModDrivers. Ran QuickGPS. Done Hard resets and half a dozen flashes. Nothing. The only program that works in Verizon's VZ Nav. TomTom, Google maps, Bing never get any sat lock. I'd say it was my phone but my dad's and the floor model at our Verizon store all have the same problems. The guy at Verizon said it was an issue with a lot of them and HTC was working on an updated rom for it. But that could be crap. Any ideas?
You probably have a faulty unit - my GPS always locks pretty quickly.
Agreed. My GPS works flawlessly. I use it all the time with TrackMe.
Never had the first problem with the GPS , works great with Google and Bing maps. Yours Dad's phone must be defective , swap it out for a new one.
Just wondering...
Start/Settings/System/External GPS on Access tab, did you marked
"Manage GPS atomatically (recommended)
If you don't do this, have you tried setting the Com Port Manually? I have a felling that if VZ works that is just a configuration issue.
As a last resource, you could use a terminal program like Token2Shell Mobile (free 30 Trial) to read the Com port "Usually Com4" and 4800 Baud and check the NMEA string coming in, here is a example from mine.
$GPGGA,204838.8,2949.9400,N,09532.6595,W,1,08,1.20,19.00,M,-2.00,M,,*56
$GPRMC,204838.8,A,2949.9400,N,09532.6595,W,21.60,268.00,021109,,*27
$GPGLL,2949.9400,N,09532.6595,W,204838.8,A*22
$GPGSA,A,3,02,04,05,09,10,12,17,27,,,,,2.60,1.20,2.40*08
$GPGSV,3,1,10,12,45,313,30,04,55,028,25,10,31,174,24,02,69,293,21*72
$GPGSV,3,2,10,09,21,243,21,05,24,182,21,17,27,080,20,28,03,143,16*7F
$GPGSV,3,3,10,27,19,237,14,30,11,319,14*7B
The bold is the amount of Satellites, in this case 8
Hope this gave you some ideas, let us know if it works for you...
Sorry for the double post working from device.
Keep in mind that some of the things you may have installed to correct the issue may have negatively affect registry settings, sync your contacts and do a hard reset on the device. And do not set up VZ nav when you bring it up.
Then do this:
Install Google maps
Make Sure your Location Setting is "on" in the phone settings. If it is on then toggle it to "911" hit okay on upper right corner then go back into it and toggle it back on and hit okay.
Soft Reset and let boat up completely
Open Google Maps And make sure USE GPS is not checked.
Click "X" in top corner to let it run in the background
Run Quick GPS and select "Download"
Open Google Maps again and select "USE GPS" make sure you have a clear view of the sky and it should take less than one minute to lock
Sometimes a soft reset is required to get a gps lock.
Actually, It is a known issue with the particular gpsone chipset. It's an issue with location caching with agps, but this phone comes stock with agps disabled. However, I have not heard that many complaints on this forum, of course not everybody uses gps. If you soft reset before you try and use you shouldn't have issues. Trust me this is my third HTC touch series phone with this issue (diamond, touch pro, imagio). With my imagio it suddenly stopped having this issue, wierd. I used to use a program called HTC gps tool on my touch pro that would clear the cache for you without having to soft reset each time you might want to do some searching, not sure if it works with wvga screens.
bastukee said:
Just wondering...
Start/Settings/System/External GPS on Access tab, did you marked
"Manage GPS atomatically (recommended)
If you don't do this, have you tried setting the Com Port Manually? I have a felling that if VZ works that is just a configuration issue.
As a last resource, you could use a terminal program like Token2Shell Mobile (free 30 Trial) to read the Com port "Usually Com4" and 4800 Baud and check the NMEA string coming in, here is a example from mine.
$GPGGA,204838.8,2949.9400,N,09532.6595,W,1,08,1.20,19.00,M,-2.00,M,,*56
$GPRMC,204838.8,A,2949.9400,N,09532.6595,W,21.60,268.00,021109,,*27
$GPGLL,2949.9400,N,09532.6595,W,204838.8,A*22
$GPGSA,A,3,02,04,05,09,10,12,17,27,,,,,2.60,1.20,2.40*08
$GPGSV,3,1,10,12,45,313,30,04,55,028,25,10,31,174,24,02,69,293,21*72
$GPGSV,3,2,10,09,21,243,21,05,24,182,21,17,27,080,20,28,03,143,16*7F
$GPGSV,3,3,10,27,19,237,14,30,11,319,14*7B
The bold is the amount of Satellites, in this case 8
Hope this gave you some ideas, let us know if it works for you...
Click to expand...
Click to collapse
I concur if it was a hardware issue VZ nav wouldn't work.
Sweeny Russ:
I being looking for a program to manage the GPS chipset, I use many kinds of GPS devices for work and it would be the first time I see a GPS device I can't program/manage. Gpsone chipset is the GPS on board device? Do you have a link for this HTC GPS program? I wonder if I can actually program with it...worth asking
One of my friends had the same problem as you mentioned. I asked him to do a hard reset and after a HR, the GPS has been working smoothly. Please try a HR!
I have no complain about my Imagio's GPS because it works much more than I expected. I can get 7-8 sattelites fixed in house, near the window where my old phone Touch HD could not fix any sattlelite.
I'm about to try bastukee suggestion. Giakhoa are you saying do a hard reset after a hard reset?
bastukee This is what I got, any ideas?
$GPGGA,,,,,,0,,,,,,,,*66
$GPRMC,,V,,,,,,,,,*31
$GPGLL,,,,,,A*11
$GPGSA,A,1,,,,,,,,,,,,,50.00,50.00,50.00*35
bastukee said:
Sweeny Russ:
I being looking for a program to manage the GPS chipset, I use many kinds of GPS devices for work and it would be the first time I see a GPS device I can't program/manage. Gpsone chipset is the GPS on board device? Do you have a link for this HTC GPS program? I wonder if I can actually program with it...worth asking
Click to expand...
Click to collapse
Let me know how this pans out. I haven't used this new version but it will allow you to play around with some setting my gps locks instantly so I'm not going to mess with it I just now it works on vga, you might need a screen rotate app to read all settings.
Original Post where I found it is here
Sweeny, Program works nice. it's an easier way to see the data then the program bastukee gave me. But sadly I don't know what half the options do and it still gives me the same date I posted in #12. Thoughts anyone?
That's exactly what you would get when satelites are not being seen, in fact you can't even see a Clock. Once I finish this 3 day trip to India and settle I will try that program and see how my settings look like and post screenies. "I'm a zombie atm"
Thanks for the help. I'm going crazy trying to get this to work.
While bastukee is on his trip, anyone else have any ideas?
hackthis02 said:
While bastukee is on his trip, anyone else have any ideas?
Click to expand...
Click to collapse
be sure ur using com port 4
There's where I got the data that matched the data bastukee showed me. And the one in the settings.
I might be pointing out the obvious but, did you try this outside? After like a minute?
Anyone else having Problems with my location not showing weather and saying Unable to download weather... The clock will work but i have to manually put a location in to get weather on my phone.
nardone24 said:
Anyone else having Problems with my location not showing weather and saying Unable to download weather... The clock will work but i have to manually put a location in to get weather on my phone.
Click to expand...
Click to collapse
are you sure you have location services turned on in settings?
same problem
im also having that problem... i made sure all the location services are activated and still nothing
No other issues with data or cell reception/connection at that time?
V1R3Z said:
im also having that problem... i made sure all the location services are activated and still nothing
Click to expand...
Click to collapse
if ur on the rom that came with the device ur the problem but if u moded the rom sayin u downloaded a rom from xda or members then u need to go back to the rom thread u downloaded ur rom from and let them in that rom help u and always remember to do a search before startin a new thread
Did my research, im on stock rom location services enabled. No reception problems
But thanx anyway...
Are you connected to a PC? If so try this
On the Windows Mobile Device Center window under Settings click Connection Settings. Then uncheck Allow data connections on device when connected to PC and select The Internet for This computer is connected to. I don't recall much about activesync, but I think it has something similar.
I ran into a similar issue and this solved it.
nardone24 said:
Did my research, im on stock rom location services enabled. No reception problems
But thanx anyway...
Click to expand...
Click to collapse
It doesn’t work for me either. Actually, doesn’t work in Orlando area, but if I go to other cities here in Florida it does (on 3g or not)
The only way that I can make it to work here is turning on the wifi without connecting to any wifi, then turn it off and tap “ Uptade Now” or tap "update now" while the wifi is searching for connection.
ya i called t-mobile about this yesterday there sending me a replacement phone mybe its a hardware problem
capsnikerz said:
ya i called t-mobile about this yesterday there sending me a replacement phone mybe its a hardware problem
Click to expand...
Click to collapse
Mmmm, I don't think it's a hardware problem, at least for me. It does work in other areas.
@ nardone, etc....are you all able to open google maps and get any localization there (either with or without satellites)?
On the few occassions I've had problems getting "my location" to update, it was cleared up as soon as I opened gmaps and got a full lock...so you can try that, at least make sure that it's not a hardware issue.
Hey, a fellow Orlando-an! I have the exact same problem with the My Location service here. I have Orlando put in as a manual location, and it updates every couple of hours as its supposed to. But for the My Location, it hasn't updated in 3 days.
Nothing more annoying than going outside in the blinding heat and sun to look down on your phone that says you are in the middle of a thunderstorm.
It doesn't seem to be a problem with the GPS or location system, as it updates my location fine(currently in Maitland, not Orlando, which is correct). But it doesn't download the weather for this location properly. Very troubling...
Vengeance000 said:
Hey, a fellow Orlando-an! I have the exact same problem with the My Location service here. I have Orlando put in as a manual location, and it updates every couple of hours as its supposed to. But for the My Location, it hasn't updated in 3 days.
Nothing more annoying than going outside in the blinding heat and sun to look down on your phone that says you are in the middle of a thunderstorm.
It doesn't seem to be a problem with the GPS or location system, as it updates my location fine(currently in Maitland, not Orlando, which is correct). But it doesn't download the weather for this location properly. Very troubling...
Click to expand...
Click to collapse
Go Magic!...
I'm not sure what's the problem. As I said it works on wifi and even when wifi is on and not connected to any network. It does work fine on Edge here in Orlando and also worked in 3G in Miami and Las Vegas.
I've been playing with it all afternoon at work(aren't they happy about that), and can't get it to update for the life of me. Tried turning on wifi, off and on HTC location service, disabling 3G, whatever I do it won't pull current weather data.
Maybe there just isn't anything to pull for Maitland, which is where I am at the moment, because the manual Orlando entry downloads fine. I wish there were a way to choose the location for my Cookie's hometab so it didn't show an incorrect thunderstorm.
Vengeance000 said:
I've been playing with it all afternoon at work(aren't they happy about that), and can't get it to update for the life of me. Tried turning on wifi, off and on HTC location service, disabling 3G, whatever I do it won't pull current weather data.
Maybe there just isn't anything to pull for Maitland, which is where I am at the moment, because the manual Orlando entry downloads fine. I wish there were a way to choose the location for my Cookie's hometab so it didn't show an incorrect thunderstorm.
Click to expand...
Click to collapse
Try Oviedo! lol j/k
There's actually an app around xda somewhere that lets you add cities that aren't in manila's database by default. I don't remember the exact location or name, but it works on multiple devices so it might just be in the general section. I'll try to look for it more when I get home later but you might find someone who remembers the name before I do, or just find it through searching.
It works!
For same reason that I don't know, my location is working fine today in Orlando, on 3G, H, and wifi...
Have you tried QuickGPS?? Works beautifully!!!!!
Make sure you have a data connection turned on... If you don't, it will not update automatically to your city or weather...