Related
Hi, I'm a developer wanting to write an app/today plugin. Do you have any request?
Yea I've wanted this for long time and hope you make it for me. Program that like the watch beep or vibrate 30 min or hour and not turn the screen on?? so I can tell time without pulling the phone out.
Thanks for the opportunity, I was thinking about asked here.
Today plug in for Last call and Running Program as in O2 Plus. Both are nice features of O2 Plus but sadly hacked version has lot of issues to run on wizard and it's big prog to install only for those plugins. Thanks.
check this out http://forum.xda-developers.com/showthread.php?t=328317
I'd love an app that would allow you to get notifications of email that goes into folders other than inbox. Currently, there's no way to do that, and there are no rules you can set like in desktop Outlook to inform you when a message goes into one of those folders.
Hi Kartam, I use claunch, you can see it in my avatar there, I would love to be able to finger scroll the launch icons to the left or the right to quickly get to all my apps, configurable icon size of course. Outside of the today screen a finger friendly file browser is definitely waiting for development, something that has the look and feel of pocketCM but shows your files instead of your contacts, complete with favourites and filters for stuff like music videos or documents. It should also allow users to set a default action on selecting any given item.
funger friendly alarm clock?
Hi,
how about an alarm clock with numbers like a telephone pad, so you can easily type in the wake up time (regular cell phones allow this). I tried all sorts of commercial products, they are not good (snowtime, spb time, etc...)
Or how about a modern version od "pPod"? :-D
Good luck with all your programs!!
finger friendly alarm clock?
Hi,
how about an alarm clock with numbers like a telephone pad, so you can easily type in the wake up time (regular cell phones allow this). I tried all sorts of commercial products, they are not good (snowtime, spb time, etc...)
Or how about a modern version od "pPod"? :-D
Good luck with all your programs!!
Mine's rather Simple!!!!
...or at least I think it it should be.
All I want is an app (preferably that sits on the today screen) that can toggle the network selection between automatic, roam only, and home only.
Sometimes I need to roam to hold a proper signal, and in those places I like switching my phone to "roam only". Then, when going home, I switch it back to automatic network selection. Problem is that this is buried in many menus and takes several clicks to switch. Its a pain to do this 2x a day.
what do you think?
I actually think you may be able to do that with MortScript, I could've sworn I saw a script that did something similar on HoFo or another forum with one that did almost exactly what you described, but it might've been the WiFi radio in conjunction with a GPS puck...or something
I have multiple application using GPRS. My problem is that all those application are not using tha same APN (not sure of the name, I mean different GPRS connections). Each time I need to use one application or another I need to go to the parameters, change my setting click multiple times on OK.
It would be great (at least for me) to have an application on the today screen which permit to select the correct APN.
Regards
Stephane
cybersush said:
Hi,
Or how about a modern version od "pPod"? :-D
Click to expand...
Click to collapse
What a great age we live in when a completely touch screen digital music player is not considered as modern!
Haha, you got a point there, touché :-D
What i meant was a more modern pPod skin (maybe more skins to choose from...?), a playlist manager of some sort (so you dont have to browse through all kins of folders until you find your mp3s), slightly bigger buttons, ....
I love the design and the simplicity of the pPod though, just a little tweaking would be cool. And yes, i did also try mortplayer and HTC audiomanager, both great programs, but both programs are too big for just playing music (in my opinion)
Actually a great program would just be a hack to have HTC Audio Manager use the ID3 Number tags to sort music instead of Alphabetical
Re the new ppod program - that'd be great - I've been refreshing the iphone media player thread like nothing on earth - cant wait to see what that turns out like... the HTC hack would be good tho.
ps you might want to check out Simple Tunes V1.61
Hi!
You can make a little program for me??
Here you can find a little CAB http://forum.xda-developers.com/attachment.php?attachmentid=49265&d=1188921933
They copy to the Windows folder a little executable, copy into StartUp folder a shortcut to it, and add few registry-entries....
Well, this program don't have any interface, simple start when device start...
The target is "improove" the quality of A2DP transmission (audio over bluetooth)
BUT, when this service running, the battery quickll drain!!
You can make a simple app (like a GUI) to enable/disable it??
To enable = write few registry-entries and copy a shortcut to the StartUp folder, then softreset the device
To disable = remove the same registry-entries and remove the shortcut from the StartUp folder, then softreset the device
Can you create an application that will let my Hermes roam the floor vacuuming!?
a2dp stereo auto enable
can you write (or is there out there) an app which enables the a2dp pairing with a bt headset so the stereo is enabled by default when the headset re-establishes a connection.
currently (for me) if i turn loose the pairing, ie if I charge the headset, then turn the headset back on for a2dp. I have to run the bt settings in control panel and click 'set as wireless stereo' on the headset.
note the phone headset is enabled straight away when it is powered up.
thanks
left/right scrolling today screen plugin
this would be a sweet today plugin....
Location based profile changer
btWatch is an application developed for Windows Mobile 5 and 6 based Smart Phones and Pocket PCs. It allows for communication with bluetooth enabled watches, such as those from Sony Ericsson (MBW-100 & MBW-150) and Abacus. Due to the fact that these watches were manufactured to work with specific phones only, they have previously been just out of reach for those of us partial to WM5/6 based technology.
While these watches were designed to support basic CallerID presentation and messaging alerts (some also control audio playback) I have taken it a step further by adding new features and improving upon the basic features.
Here's the latest version of btWatch. Currently at version 0.1.6
If you are having trouble getting your watch to work with btWatch, consider using smartWatchM which is being developed by MoneyToo.
This version currently supports the following:
Code:
1. Pairing of a new Watch directly through the app.
2. Establishing communication with an already paired Watch.
3. Creates a registry key (HKLM\SOFTWARE\btWatch) for device setup and options.
4. Options Menu to enable/disable features.
5. Current Options: CID, SMS, EMAIL, VIBRATION and Number of rings to Vibrate on.
6. Fully functional incoming call notification (2-line name/number + vib for n rings)
7. Notification of incoming Text Messages (displays name/num and full message).
8. Notification when new Email arrives (displays name/email and subject).
9. Digital Date and Time are synchronized with the phone.
10.Debugging mode to allow you to see behind the scenes for testing purposes
("Monitor Connection").
11.Added EKG annimation when connection is established.
12.Watch will now auto connect after going out of range and coming back within range.
13.Added 2-line text support.
14.Added basic support for MBW-150
15.Reject a call by pressing upper right button twice (much more responsive)
16.Display phone status info by pressing crown(play)
16.1. Number of unread email messages
16.2. Number of unread SMS messages
16.3. Number of missed calls
16.4. Voicemail Notification Icon
16.5. Current phone battery charge Icon
16.6. Headset Pairing Icon
16.6. Live "bars of service" from phone
17.Lists all appointments for the day by holding crown(FF)
18.Control WMP (press upper right button to activate/deactivate control) via crown
18.1. Pause, Play, Next Track
18.2. Displays current Artist/Track name on watch
19.Fonts are loaded dynamically from bmp files allowing users to modify fonts
20.Display task list with priority and due date by pressing upper right button when
viewing appointments menu.
21.New Menu System - Press and hold Crown(FF) to access, then press upper right to cycle.
Note about fonts: You can edit the bmp files with windows paint. Do not alter the height of the files (8 pixels), but you can alter the width and content. Must be saved as monochrome (1bit) bmp file. Do not change the individual file names in any way.
Installation: To simplify installation I have also compiled 2 separate cab installers. One for Smart Phones without the touch screen and one for PocketPC style phones. Should work on WM5 and above.
Disclaimer: While I make every effort to thouroughly test btWatch before each developmental release, I cannot guarantee compatibility with your phone/watch. As this is beta software, you use it at your own risk.
Price: btWatch is currently free for you to use as you please, but if you feel that the application is worth pursuing you may make donations to help further its development.
Anyway, I hope you all like the new version!
Download:
version 0.1.8
btWatch for PPC
btWatch for SPversion 0.1.7
btWatch for PPC
btWatch for SPversion 0.1.6 Buggy - Use newer version!
btWatch for PPC
btWatch for SPversion 0.1.5
btWatch for PPC
btWatch for SPversion 0.1.4
btWatch for PPC
btWatch for SPversion 0.1.3
btWatch for PPC
btWatch for SP
Hello,
I want to Test your Programm because (little) Problems with sWM INFO ("moneytoo" could not find the solution ).
But "Pairing" is not possible, btWatch find my MBW-150 but could not Connect. If I want to connect my PPC (Asus P750) with MBW-150 Ex. PPC "Freeze" / see only WM "hourglass".
Pernod99 said:
Hello,
"Pairing" is not possible, btWatch find my MBW-150 but could not Connect. If I want to connect my PPC (Asus P750) with MBW-150 Ex. PPC "Freeze" / see only WM "hourglass".
Click to expand...
Click to collapse
Try something for me so that I can get a better idea where the problem is. If there is a com port associated with your watch in start-settings-bluetooth-comports delete it, then delete the watch from the list of paired devices. Ensure that you do not have moneytoo's app set to startup with WM (or temporarily remove it) and soft reset. Then please pair the watch directly through btWatch and let me know what happens. I will take a look at the code in the mean time.
pcfixitman said:
Try something for me so that I can get a better idea where the problem is. If there is a com port associated with your watch in start-settings-bluetooth-comports delete it, then delete the watch from the list of paired devices. Ensure that you do not have moneytoo's app set to startup with WM (or temporarily remove it) and soft reset. Then please pair the watch directly through btWatch and let me know what happens. I will take a look at the code in the mean time.
Click to expand...
Click to collapse
At first i had the same problem, i couldn't get the watch connected to my Tytn II (Kaiser), after deleting COM6 and removing Moneytoo's program and reinstalling BTWatch it works great. I will test it in the field over the coming days.
Donation will follow....thanks for creating a second program for us PPC users.
Little Question ..... btWatch have a Appointment notify Feature ?
btWatch hangs
Tried it out and i like the overall functions of the program. It potentially can become a true opponent for smartwatchm. But what makes me change back to this program is that btWatch keep stalling as soon as the ppc is turned off for a while. When i turn it on (wake it up) and try to open btWarch is only see the turning circle, forever (it seems that way), apparantly this is the case when i've been out of reach from the ppc and come back to it. When that happens i cannot reconnect and i have to soft-rest the ppc to start thing up again....so good effort but alas....i'm switching back to smartwatchm and waiting for a stable version...keep up the good work...
Edit: while btWatch still hangs (turning circle) it seems to reconnect....+1 for btWatch...
If your program displayed incoming emails (like Sender Name and Subject) it would make it perfect!!
I'll have an eye on your program too. I like the little icon stuff going on there, headset, battery meter and signal level, oh boy I'm such a kid
But since I have a MBW-150 your app isnt fully up to moneytoos programs possibilities yet. But I'll definitely keep an eye on your work, I like how far we can take those watches already anyway, if I remember how proud I was using it with my SE P1 back in the days to skip tracks in the music player... Ridiculous
I wonder though what SonyEricsson can come up with. The MBW-150 is listed as a compatible accessory for SonyEricssons upcoming XPERIA X1 which runs WM6.1...
would btwatch work with the LG Style-i as well?
the program seems to find the style-i but hangs when trying to connect to it
Version 0.1.7 Released!
Hey guys, sorry I haven't posted in a while. Life got busy this week.
Anyway, here's the latest version of btWatch!
Version 0.1.6 seemed to be a bit buggy for most, so I re-worked a lot of the code. It should connect and reconnect more reliably now. I added email sender and subject to the email notification as requested. I added a minor update to the Appointments menu: now shows 1st all day event as well. Unfortunately, this version still does not show appointments that are setup using a recurring pattern (eg. every monday), but I will add these in an upcoming version as well as appointment notifications. BTW if you connect the watch and click "Test Menu" in the test menu you will get a glimpse of the new menu system for v0.1.8!
Link is on 1st post.
consy said:
would btwatch work with the LG Style-i as well?
the program seems to find the style-i but hangs when trying to connect to it
Click to expand...
Click to collapse
Currently this device is not supported, as it uses far more commands than the bluetooth watches. But, btWatch could be ported to a new application to support the Style-i in the future. I will look into supporting the Style-i, but do not expect an app until btWatch is at a very stable version.
Tested the latest version with my HTC S621 and my MBW-150. After I sent myself an email to see how it works, the program crashed... I repeated the test, it crashed again.
p.s. I dont know if you have a landscape device or not, but on my Excalibur the text area gets cutoff at the bottom. It really gives it an unrefined look... :/
NRGZ28 said:
Tested the latest version with my HTC S621 and my MBW-150. After I sent myself an email to see how it works, the program crashed... I repeated the test, it crashed again.
p.s. I dont know if you have a landscape device or not, but on my Excalibur the text area gets cutoff at the bottom. It really gives it an unrefined look... :/
Click to expand...
Click to collapse
Sorry to hear it crashed. Currently the app looks for an account named ActiveSync to pull email from. I will update it in a few minutes and post a version that defaults to the 1st account if this one is not found. The next version will include a place to select the account you want to check in the options menu. I will also look into having the app auto detect screen orientation, etc.
EDIT: If you downloaded v0.1.7 earlier and had trouble with appointments or email, try downloading it again. I altered the code to handle the error from the appointments menu properly and the email alerts now default to the 1st email account in the device. Please let me know if it is working better. Again, I will update the options menu of the next version to allow for account selection.
I spent the last few hours working on another update. I added a menu system accessible by holding the crown(FF). Once you enter the menu, you simply tap the upper right button to cycle through the different options. Once the menu you want is selected just wait and it will load after 3 seconds. I also added a new item in the setup menu to allow you to choose what email account to monitor (instead of just ActiveSync/Exchange).
For now I am not posting the newer version. I want to test it out tomorrow and make a few changes, but it should be posted in the next day or so.
Are these watches any good? I was thinking of buying one, but they are expensive to buy without seeing them in the flesh first.
Also other than styling are there any major differences between the mbw-100 and the mbw-150?
I'll wait for you to release the newer version, before I go though the ordeal of uninstalling smartwatch, deleting com ports, reboot, install your app... etc
Also last night the app would hang while it was drawing the EKG animation at startup. It would draw 2/3 of it and then stop. It did it a few times until I got pissed and uninstalled it. Hehe
Hey I got a question for you, pcfixitman... Do you know if it's possible to modify an app like yours to communicate with a device over the "handsfree profile" in the same manner ? Sending and receiving GSM AT commands ?
This is really cool, works like a charm on my Elfin
Thanks a bunch for this great software
Hi, this program can run whith car kit Sonyericsson whith screen for use contact ?
which watches support this protocol? How to search for them? How much does they costs?
It's not a protocol, it's an application. The model numbers are MBW-100 and MBW-150. Do your own research.... google.
Can someone make an application that will automatically switch profiles depending on time? for ex. at 12AM it will set to silent and at 2PM back to normal? I was searching really hard for some free application but no results. If there is some allready pls post a link. thx
There aren't many freeware solutions since there are so many good programs that aren't to expensive that handle the job quite well.
You might take a look at RunEveryday wich is freeware..
I'm looking for a program that does this as well. All the retail programs over complex and include unnecessary features, and RunEveryday generates errors with the static and non-static version. Anyone get RunEveryday to work? Or anyone find a simple profile switching freeware? I've used CellProfileSwitcher when I had a smart phone and it was excellent.
Last Update January 15, 2009
I have been working on a nice add-in for windows mobile,
this application will find your location (based on cell id) and change the profile based on these locations.
currently the software is capable of changing the WiFi status (on/off/unchanged) and also Bluetooth (on/off/unchanged).
changes to this document will be marked in blue
Added Spy Photos of the new Version, it will take a while but it worths the wait
Todo:
- Add Vibration Control.
- Add Ringing Volume Control.
- Make as invisible process.
- Unknown location Profile.
- Switch to Flight mode profile option.
- Display Personal Note profile option.
- smartWatchM Support, Displays location and vibrates when location changes
- Suggestion : Mortscript or application execution on certain location.
LPM V0.1.1:
- Hide Button.
- Display Cell ID Instead of unknown.
- Added Programs Shortcut.
LPM V0.1:
- Initial Release
Features:
- Cell ID Based
- Switch Profiles Automatically.
- Wireless (on/off/unchanged) support
- Bluetooth (on/off/unchanged) support.
- Leave Unchanged option.
- XML Configuration and profiles storage.
- Polling rate of 30000ms (30 Seconds).
Requirements:
- Windows Mobile OS (Tested on WM6.1 Xperia).
- dot Net framework 3.5.
i have published the source code on Codeplex on this link
http://www.codeplex.com/LPM
if you are interested in working with me to improve this application, let me know
How to use :
1 - Start the application.
2 - Click and hold on the Empty box then select add.
3 - Type the location name, select BT & WIFI settings (unchecking the box = Don't change status when reaching this place).
4 - Click menu, start recording. then move around the place to capture all cell IDs.
5 - Click save
6 - Repeat for your locations.
7 - Enjoy.
Please Post your mobile device after testing the software. state if the test is successfull or not and if you found any bugs.
Compatibility List :
- Sony Ericsson X1
Warning : Use at your own risk, neither me or XDA-Developers are responsible if anything goes wrong.
the file(s) attached here follows the License found on codeplex
http://www.codeplex.com/LPM/license
السلام عليكم ورحمة الله وبركاتهis it only for changing the profile or it can do more
thanks !! for your time to make it happen any how.
awesome, I was designing this kind of application myself..
But this looks nice, I will look at the source and see if my style matches yours. If so I think I'd like to help develop.
This could duplicate (and more) the functionality of Wifilocations (also on xda-developers), but more than just turning on/off the wifi and bluetooth!
johnchan78 said:
This could duplicate (and more) the functionality of Wifilocations (also on xda-developers), but more than just turning on/off the wifi and bluetooth!
Click to expand...
Click to collapse
i don't think so, anyway i'm planing to implement alot of new features.
let me know if you have any specific request.
I've been wondering when WM would get to have something like this. About 3yrs ago, I played with a similar program on my Nokia S60 phone. It worked pretty good. When I went to the conference room I could have the phone memorize that location and it would put my phone to silent. And so on. Thanks for your interest and work on this. I look forward to testing it out!
noellenchris said:
I've been wondering when WM would get to have something like this. About 3yrs ago, I played with a similar program on my Nokia S60 phone. It worked pretty good. When I went to the conference room I could have the phone memorize that location and it would put my phone to silent. And so on. Thanks for your interest and work on this. I look forward to testing it out!
Click to expand...
Click to collapse
thanks for your support, please let me know if you are facing any problems.
i will be including some more stuff in it soon
I use Wifilocations, but I find it somewhat unreliable with the cell-readout (but perhaps it's me). Anyway, I will give your application a try. I will mainly use it for turning on/off Wifi anyway.
I have a few questions though:
What is the polling frequency?
Is there a special -hide autostart option?
What is going to be different from Wifilocations?
Thx for your work!
Best, danckel
danckel said:
I use Wifilocations, but I find it somewhat unreliable with the cell-readout (but perhaps it's me). Anyway, I will give your application a try. I will mainly use it for turning on/off Wifi anyway.
I have a few questions though:
What is the polling frequency?
Is there a special -hide autostart option?
What is going to be different from Wifilocations?
Thx for your work!
Best, danckel
Click to expand...
Click to collapse
in the future, this application will have alot of features,
it will have a default profile (Unknown Location Profile) which will allow you to set your default setting when you are not in a known area.
also it will have options to prevent from stopping bluetooth and/or wifi if a call is on going (to prevent a BT Headset from disconnection or to prevent Wifi incase of VOIP call).
some more features will be there and whatever you have in mind can be implemented.
the polling time will soon be an option to set i think now it is set to 30 seconds (i'm not sure about the timer settings), the software automatically polls the cell id when a major event happens (add new location or edit one for example).
but i'm concerned about one thing, is it consuming battery?!
i didn't notice anychange in battery life or performance of the device. can you please confirm this?
thanks all for your support.
Didn't test it yet, but I'll suggest you add:
launch an app (sequence)
send predefined sms
connect to A2DP receiver
go to flight mode (cinema, hospital, plane)
turn off GSM part (bad or no coverage)
antitheft actions / lock the phone (when it leaves a specified location)
-> maybe this can be done with just running another app
How accurate is this ?
Cheers
Good Job ,, Well Done ,,
mmm ,, also I suggest to search for another products to collect more ideas to rich your software ,,
You can test this software I'm really using it ,,
http://www.handango.com/catalog/ProductDetails.jsp?storeId=2218&productId=246582
it has many ideas that you can include in your software ,,
also ,, this software not depending on net framework ,, and it has an independent wm service working in backgroud to monitor the cells and change the profile this thing make it too light and stable,,
it also has a today pluggin ,, so today pluggin it important ,,
so ,, give your self a time to try it to get more ideas for your software ,,
like,,, making it shareware
nono ,, please don't make it shareware ,, take all features from GSM Locator except this one ,,
lastnikita said:
Didn't test it yet, but I'll suggest you add:
launch an app (sequence)
send predefined sms
connect to A2DP receiver
go to flight mode (cinema, hospital, plane)
turn off GSM part (bad or no coverage)
antitheft actions / lock the phone (when it leaves a specified location)
-> maybe this can be done with just running another app
How accurate is this ?
Cheers
Click to expand...
Click to collapse
Sure, Sure, these are all nice features
i started immediately on some of what you said
regarding the accuracy, this cannot be measured in any unit!
the GSM mobile cell looks like a hexagon, when you are outside the city this hexagon is set to be larger (covers more land) while it is smaller inside the city, mostly, inside the city (or locations with high mobile traffic) will have more accuracy but not that much precised! for example it will not distinguish a room in your home, but it will be able to recognize your home (but maybe not your neighbour if both are covered with the same cell tower).
CodeMaster said:
Good Job ,, Well Done ,,
mmm ,, also I suggest to search for another products to collect more ideas to rich your software ,,
You can test this software I'm really using it ,,
http://www.handango.com/catalog/ProductDetails.jsp?storeId=2218&productId=246582
it has many ideas that you can include in your software ,,
also ,, this software not depending on net framework ,, and it has an independent wm service working in backgroud to monitor the cells and change the profile this thing make it too light and stable,,
it also has a today pluggin ,, so today pluggin it important ,,
so ,, give your self a time to try it to get more ideas for your software ,,
Click to expand...
Click to collapse
needing dot NET framework is not a minus! it's a framework, it makes my life (as a systems developer) easier.
developing a today plugin is tricky, it requres an unmanaged code (cannot be done via managed code at all), so if anyone is interesed in helping me in this part i would be pleased
lastnikita said:
like,,, making it shareware
Click to expand...
Click to collapse
No way, i'm not planing to establish a company and sell this product. i'm having fun developing it in my spare time
some people might have a performance concern, i did my best to avoid any practice that might affect performance. but even though, please report any performance issues if you face some
enjoy it
CodeMaster said:
Good Job ,, Well Done ,,
mmm ,, also I suggest to search for another products to collect more ideas to rich your software ,,
You can test this software I'm really using it ,,
http://www.handango.com/catalog/ProductDetails.jsp?storeId=2218&productId=246582
it has many ideas that you can include in your software ,,
also ,, this software not depending on net framework ,, and it has an independent wm service working in backgroud to monitor the cells and change the profile this thing make it too light and stable,,
it also has a today pluggin ,, so today pluggin it important ,,
so ,, give your self a time to try it to get more ideas for your software ,,
Click to expand...
Click to collapse
Guy, you were plugging your app (with handango link no less) three times on the other thread and now you are bumping it in here on the other app's thread, again? You must seriously work for them. Please, cut it off.
I tried your program, however, it could never get a fix on my location... it was always "unknown".
Im using a Xperia X1 GSM version...
johnchan78 said:
I tried your program, however, it could never get a fix on my location... it was always "unknown".
Im using a Xperia X1 GSM version...
Click to expand...
Click to collapse
please check the first post, i added how to use.
let me know if it didn't work and if you are facing any more problems.
anaadoul said:
the polling time will soon be an option to set i think now it is set to 30 seconds (i'm not sure about the timer settings), the software automatically polls the cell id when a major event happens (add new location or edit one for example).
Click to expand...
Click to collapse
Polling time of 30sec is fine, but I could not verify it. A very helpful trigger event is "turning on the device again". Could you include an active polling on this event?
It would also be nice if the application showed the actual cell id rather than reporting "Unknown" on the main screen. This enables me to check whether the polling actually works.
Wifilocations also has a trigger event when you leave rather than enter a cell. This could also be very handy.
Battery drain is of course a major concern, because the application has to run continuously. I haven't had time to check the battery drain yet.
Finally, is there a program switch that enables starting the program in the background?
PS: Thanks also for sharing the source code.
send predefined sms
-this option would be very useful for people who always travel because it can send an sms to a pre defined number especially if it will also send the cellid. it can be used as a tracking device.
this is what i did:
- launched LPM
- Options > Add New Location
- added location name: Office> ticked Ringing Volume > adjusted to lowest point > Start Recording > Saved
- quit the app
- relaunched the app, now the Current Location shows "Office", Ringer: 0%
- when someone calls, the ringer volume is still max
Not sure if this is the right place but I was curious about creating a Profile or something to turn off notifications (text msg, email, tasks...) except for the phone? For example on my Blackberry you have a profile to mute all sounds except a phone call, like a night profile. Does this make sense? I know I can manually do this but I would like to click something to change the profile.
There is no built-in sounds profiles support so you'll need to install an application to give you the functionality. I don't use one but see if PocketZenPhone gives you what you want.
http://www.pocketzenphone.net/
Thanks, I will take a look at it. If there are any other let me know.
Mesquire said:
There is no built-in sounds profiles support so you'll need to install an application to give you the functionality. I don't use one but see if PocketZenPhone gives you what you want.
http://www.pocketzenphone.net/
Click to expand...
Click to collapse
I tried this and it works fine.
Actually, I tried PZP years ago on my MDA (Wizard), but had forgotten about it. I was missing the ability to quickly/one-button configure ring-tone, volume, etc for different situations (e.g., in the car, at my office desk, at home) -- an ability which is standard on dumb-phones, so I'm glad someone brought this up.
This is an old program, but it seems to be compatible with my WM6.5.3 Manila 2.5 OS -- finger-friendly, even.
Thanks for the link.
You may also want to look at phoneAlarm. Probably the most complete - and complex - WinMob profile application around. But, it actually gives you total control over the phone - including the interface - if you desire. www.pocketmax.net
Here's a screen shot of my set-up...