I can make any more of manipulation on the phone.NO of recovery not of fastboot nothing... my phone is bricked ? MY PC NOT RECONGNIZED MY HTC MAGIC
nice tag
That was silly wasn't it lol
Bricked phone.
htc magic with rom radio for htc hero
TigerTael said:
Bricked phone.
Click to expand...
Click to collapse
is impossible of repair my htc magic ?
you cant flash a ROM wich is from other phones, you must always flash the POrted Version of that rom.
Does it recognize you SD card? Try insert the Sappimg.zip and enter in Boot mode to see if it installs. Use goldcard method if doesnt work.
Else you'll have to JTAG hack it. You can find that info here:
http://forum.xda-developers.com/showthread.php?t=591048
I did a mistake and now im asking for advice because i dont want to brick it for good.
This is all i can see on my device after i tried to run the RUU update to 2.1 with sense
If i try to run again the RUU it says ERROR [170]: USB CONNECTION ERROR
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jan 14 2010,00:14:58
RUU
What can i do to bring him back alive ?
Big thx , Gabi.
First you must flash custom recovery,and then enter it and flash ENG SPL like 1.33.2010, and then you must download eyegor's radio switcher and flash all new and then install new rom
thx for the fast answer
This is my first time , but i still don't know the steps , i am very confused.
I have read about similar situations where goldcard was needed or a RUU solved the problem
If a RUU can solve my problem too it will be great.
Do you have Windows 7 or vista? I think i had same problem i did it on WinXP,which phone do you have Rogers Magic or something else?
I have windows 7 , i found a thread with a similar problem
now i`m trying to do a goldcard but i`m not pretty shure what to do with this after i am done, i just fallow the steps there
I have found 6-7 diferent RUU but only one can actualy see the phone and that is the RUU that actualy did this to my magic , the RUU update stops at the signature ,so with different os i may have a chance?
Here is the thing you can download only 1 RUU from htc site, you must go to country you are from select the right HTC magic i think you are using Rogers magic and then you must enter you S/N there and then you can download it. And install it on winxp. I must ask you something which android do you have 1.5 or 1.6?
I have obtained my htc RUU from my country site but when i try to apply it can't find my device sadly, i think is like you said only works in xp i will try today.
Now i have a goldcard but i dont realy know what to do with him , how can i use it to restore my phone.
Android 2.2 froyo with CyanogenMod 6 was , i was trying to make it to oficial 2.1 with sense
First of all you cant do RUU when you have CM6 it will brick your phone totaly, you must downgrade you phone to original Rogers 1.5 you should batter install some custom made Android made of rogers i created my own,be carefull very carefull.
So in my case is total brick?
How can i downgrade? and witch custom android?
If you want Rogees 2.1 android you just need to change spl (which i can give you,can you enter recovery?and which do you have),second thing is to use eyegor's radio switcher and just press flash new button via fastboot,and the restar to recovery again adn install rogers stock rom with root(which is like original only with root).and i must ask eyegor something so be patient
I can only enter in Fastboot , that is the problem the phone don't allow me to enter in recovery mode.
In my case a goldcard is useful? because i did one following a guide but i don't know how to use it stupid me
I never did goldcard but i know this that you must follow those instructuions if you made a good goldcard you must flash the right eng spl which is 1.33.2010 and if you do that right it will unbrick,and you must then install Custom recovery it is RA's 1.7.0H. When you finish that download eyegore's radio switcher and enter fastboot again and flash new option if do that right then you can boot to recovery and install ROM
http://forum.xda-developers.com/showthread.php?t=778083
http://forum.xda-developers.com/showthread.php?t=677045
And in fastboot you must have same specs like mine
Gabelu23 said:
I did a mistake and now im asking for advice because i dont want to brick it for good.
This is all i can see on my device after i tried to run the RUU update to 2.1 with sense
If i try to run again the RUU it says ERROR [170]: USB CONNECTION ERROR
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jan 14 2010,00:14:58
RUU
What can i do to bring him back alive ?
Big thx , Gabi.
Click to expand...
Click to collapse
1) The reason you don't get connection to the RUUs is because you are in fastboot mode.
RUU needs adb connection mode
2) You have the wrong spl/radio combo. That's why you cannot boot your device to any system. To fix this you have to change the spl to 1.33.20xx version, where the xx can be 05, 09 or 10.
3) Following the logic from option 2 you have a problem!
The spl you have now is a perfected one, meaning you can't do anything with it. So changing only the spl is not possible (as fare as i know :0)
4) Following the logic from option 3 you have to use a goldcard and flash a sappimg.zip or sappimg.nbh.
Both will try to overwrite ALL data on the nand and restore the device to a state where you again have some control over it.
The solution)
You have to make a goldcard and use a combitable sappimg.zip/nbh.
Try this one:
http://rapidshare.com/files/421772202/SAPPIMG.nbh
Put the file on the root of the goldcard. Reboot into hboot or fastboot... let it work... when done restart and post the result here :0)
PS: Give thx to WoblyGoblin because he convinced me to help you out.
Looks like my card is not good for goldcard , i will try tomorrow again with a different card.
PS: BIG thx to both of you for you`r help!
I'm pretty sure your hosed. Once you run an RUU and it fails your stuck with RUU USB until a RUU is ran properly. Which wont happen in your case.
Sent using Tapatalk.
Why wont work in my case?
I think what mumilover told me can be a solution, i must try.
Any progress yet???
Gabelu23 said:
I can only enter in Fastboot , that is the problem the phone don't allow me to enter in recovery mode.
In my case a goldcard is useful? because i did one following a guide but i don't know how to use it stupid me
Click to expand...
Click to collapse
if you have a goldcard, put in your device and flash with RUU rom.
if you didn't have a goldcard, download your original rom from HTC website and flash it
if you have non branded device, choose unbranded rom.
but if you have branded device, choose your branded rom.
i was semi brick (stuck in RUU mode) my device twice, and this solution working well for me
Hello,
I tried to upgrade my magic With RUU. Sudenly the programme stop instaltion. Now my phone wont start. Ther is only RUU indicate on the screen.
Some informations :
32A
RADIO 6.35.0829
HBOOT 1.76.0008
It's a Proximus phone (an operator in belgium)
I'm on windows seven 64-bits
More info please...
Can you get to fastboot?
Can you get to recovery?
absolutly not ! there is only RUU when I sart my device.
My way to HTC ROM for the Swisscom 166 Trophy of my governance
I have tried something from posts in this forum and the only way to get
HTC Rom is this way
For the installation:
Turn of your device, hold the volume down button and turn on your device
Connect your device to PC via USB cable.
Download RUU_Spark_Vodafone_CH-DE_1.08.166.02_Radio_5.50.09.15_22.23.50.09U_by_an sar
from
http://forum.xda-developers.com/showthread.php?t=924333
Install RSPL from DFT Team
Install HSPL from DFT team
You will find RSPL and HSPL from DFT Team in this Thread
http://forum.xda-developers.com/showthread.php?t=1195647
Download RUU_Spark_HTC_Europe_1.10.401.04_Radio_5.52.09.16_ 22.33a.50.10U_by_ansar
from
http://forum.xda-developers.com/showthread.php?t=924333
After this installation's you can boot normaly and configure your device.
Connect your device to PC via USB cable and start Zune
With Zune you will get the newest versions (NOT MANGO).
German greetz
Schmerzspender said:
My way to HTC ROM for the Swisscom 166 Trophy of my governance
I have tried something from posts in this forum and the only way to get
HTC Rom is this way
For the installation:
Turn of your device, hold the volume down button and turn on your device
Connect your device to PC via USB cable.
Download RUU_Spark_Vodafone_CH-DE_1.08.166.02_Radio_5.50.09.15_22.23.50.09U_by_an sar
from
http://forum.xda-developers.com/showthread.php?t=924333
Install RSPL from DFT Team
Install HSPL from DFT team
You will find RSPL and HSPL from DFT Team in this Thread
http://forum.xda-developers.com/showthread.php?t=1195647
Download RUU_Spark_HTC_Europe_1.10.401.04_Radio_5.52.09.16_ 22.33a.50.10U_by_ansar
from
http://forum.xda-developers.com/showthread.php?t=924333
After this installation's you can boot normaly and configure your device.
Connect your device to PC via USB cable and start Zune
With Zune you will get the newest versions (NOT MANGO).
German greetz
Click to expand...
Click to collapse
Nice.. This method works with every HTC Device (first generation)!
Hi everyone! At first sorry because my english is not better than my french
My problem: I have an HTC hd2 with a white screen and the SPL 1.42.0000 (i can go to bootloader). I google it and can't find any solution, i tried to instal HSPL (with hspl2/3/4) without success (usb fail connection) i have the same error with an task29, and an hd2toolkit. I tried to instal from sdcard but i have the error "radio v2 fail".
I think this is a problem at height of XDA developers ^^
PS:I tried to change Computer or usb port and execute as administrator but nothing...
If you coul help me it will be realy nice.
is the phone recognized in device manager? If not its a driver problem.
also do the usual ( verify its not the usb cable, try different usb port,) if drivers are ok
thank you for your help
The computer recognize the device but without OS (white screen) i can't do anythings with Activesync, i tried other computers and other usb port/cable but nothing. I think isn't a driver's problem because the instalation with sd card don't work.
Anis92 said:
The computer recognize the device but without OS (white screen) i can't do anythings with Activesync, i tried other computers and other usb port/cable but nothing. I think isn't a driver's problem because the instalation with sd card don't work.
Click to expand...
Click to collapse
Don't understand what you mean by "white screen"?
Try installing a stock winmo for you device to make sure everything is ok...
i tried to instal an official htc rom from sd card but it doesn't work, by "white screen" i just wanted to say that when i turn on my phone the screen is white.
It sounds like you have done a Task 29 and you do not have a ROM on your HD2 right now. This is why you just boot to the white screen.
You do npot have to use Active Sync or Windows Mobile Device Center to flash via RUU. You just have to have them installed because the haqve the USB drivers for the HD2's WINCE Bootloader in the programs and they install the drivers when you install the program.
The drivers in Active Sync and WMDC allow you to have a HTC Sync connection in the bootloader. Just boot into the bootloader by holding down the volume down button while powering on yuour HD2. Next connect your HD2 to your computer via USB cable. Wait and watch for the Serial in the white bar of the bootloader to change to USB. When you see USB you can run a RUU.
Now to address your 1.42.0000 SPL, this is a older SPL version and you may have to keep trying different RUUs until you get one that will flash. Just make sure if you have a T-Mobile HD2 that you do not flash any radio version below 2.08.50.?? or any radio version that has a 51 in the radio where the 50 is in the first radio I mentioned, or you will brick your T-Mobile HD2. Look for the radio version in the RUU name it will be there.
Sometimes the HD2 develops what is referred to as a "stuck radio" when they have these early SPL versions like yours. This is why I say you may just have to keep trying different RUUs until you find one that will flash.