I have a 8525 and I tried to flash the rom with (Schaps_WM6Pro_Hermes_4.31_WWE_Full.exe) I did it before last year and worked fine, tried again today and I must of made a bad mistake because it gave me an error and or a message which I don't remember now it will not boot. when started the screen says HTC in the Middle and then in red on the bottom it says,
M05 R1.54.07.00
S04 G32.86U.7020.23H
B06 D3.62
I tried reading as many threads as possible to find a solution, differents types of start ups and flashing the rom with a sd card but nothing seems to work. not sure if I am even doing right.
Help would be really appreciated..
Thanks
Related
I tried upgrading to wm5 following a dodgy pair of instructions so i didnt put cert or put typhoon.dll on fone before flashing, flashed using mtty.exe and i was able to boot up with wm5 but problam was it booted until i tried pressing the left soft key (eg start menu) nothing happend it changed color and sat there, i tried countless times, neone else had that problem or is it cause i missed out first steps? so downloading someones back up of the same fone inc uk orange.bin tried flashing it, seemed to work, restarted and now just sits at first screen saying orange,thats it, now i cant even do that, i dont know what to do a step by step guide if ne one has time would be great!!!!
Just follow EXACTLY the procedure described in this thread, then it should work (it did for me, I am very happy with WM5 on the C500)
Cheers
http://forum.xda-developers.com/viewtopic.php?t=23368&start=75&sid=d3d0369417cbef1a6d29639940523a0a
Hi Guys,
Well yesterday the Battery on my 9100 went flat this has happened before and I just charge it back up and its fine.. But this time I incurred Data Loss
Went to turn it back on and it locks on the Boot screen where its states the GSM etc.. Have gone through the usual key press to format and I keep reciving format failed
Any help would be most appriciated
Get to the bootloader screen (multicolored) by turning device off - hold camera button and turn on. Sounds like you need to reflash you device with the same or updated rom - all the wizard roms are listed in the wiki - link is top left on your screen
ul, prehaps its cos your knees are too bendy?
Imp
Ive tryed changing the rom to a newer version, but still no avail... still saying format failed.. Any more ideas before I have to send it back to Qtek... which I would really rather not do
Droc said:
Ive tryed changing the rom to a newer version, but still no avail... still saying format failed.. Any more ideas before I have to send it back to Qtek... which I would really rather not do
Click to expand...
Click to collapse
Did you sort this out? I can get to the multicolored screen and flash my wizard but it never boots past the second splash screen. I think the extended rom is corrupted somehow and I need to clear it but hard reset just ends with format failed? Any ideas?
J
I have read and read and read. I have "bricked" my phone in the past and fixed it. I have used, tested, and flashed many roms from this site (Thanks to all cooks for their work!) but I still consider myself somewhat 'new' to troubleshooting.
I woke up this morning to make some important phone calls today and as luck would have it, my phone was stalled again. It's been doing that for a few weeks now. My last flash was Open Touch 5.0 UL I believe (either that or 5.2 biggy) and it has been working great except for the occasional freeze.
EDIT: Forgot to add, the actual problem is now it won't boot up after it froze this morning. Just sits at the boot screen
So I've tried my other methods of fixing it... /edit
Except this morning nothing is working. I have tried flashing with Orig. T-mobile ruu, tried SD flashing with the RUU_signed.nbh, tried restarting the computer, phone, removing battery and sim... NOTHING! When trying the sd flash (which I've never done before today, it reads and tells me to push the down button but then goes to bootloader screen and just sits there. With the RUU I'm getting err 300 but I'm using the SAME RUU (4.10...) that I've used in the past to reflash my phone AND tried the new one (4.26...)
Possible problem: Does it matter what kind of usb cable you use? I don't have the normal one I use as I am not home but I figured usb is usb...
I've read about it being a motherboard issue, how common is this?
I've read somethings about MTTY, would this apply to me??
Please help, anyone who has any suggestion, I'll try it!!
Stats:
IPL 4.10.0002
SPL 4.10.0000
NOT hard-spl'd
Wing w/ Open Touch Project 5.0 or 5.2
actualy the sd method needs hard spl thats all i can really provide
I appretiate it, that I did not know... I could barely find anything on how to do it even.
im having the same problem bt instead of freezing da screen jus goes different colors or jus goes gray and stays der
Thats basically what mine did. The colors would get messed up and no matter what button i pressed it would not do anything. My advice to you edrift, is BACK UP YOUR STUFF NOW and reflash it asap if you can still reboot. I can get into my phone at all now.
yea i tink i might jus throw my phone away.dis is jus gettin rediculous
hi there, it seems that im missing my image version SPL-1.28.0000 for the original rom for polaris.
is there any way to get the same image version? cz im stuck into the bootloader screen and tried to flash original rom 1.28.415.2 it flashed 100% but went back to bootload!!
am i missing something?
when flashing and the update tell that its gonna replace ur old image with the new one, for my devise it doesnt show any old image ... its just put the new one that will be upgraded to.
i know that it seems confusing thats why im asking !!! plz help ... its my second day stuck in the bootload screen with no help
i managed to catch what it is saying b4 bootload screen (only when SD card is in place) it says no image file was found!!! in a very fast way and go to bootloader. in case the sd is not in place nothing happens and it goes straight to the bootloader
Try this...
http://forum.xda-developers.com/showthread.php?t=425922
edit...:Sorry i see you know the thread
I have had a similar prob and and try mtty and problem are gone
and have you hard spl flashed before you flashed any other roms..??
Good Luck
thanx, yeah i did almost everything
the bootload stucking happened alone without me doing anything b4, i just left the phone as always and came back to find it stuck. so first i unplugged the battery and softreset and tried to hard reset but nothing happened.
second i searched the foum and i tried the solution in the thread u gave and no errors poped-up and i thought thats it but it wasnt and the devise restarted to bootload.
then i tried to load the original rom b4 unlocking (hard spl) cz i thought that its is the original so why do i need to unlock my device .... something went wrong cz active sync didnt work ... so i went to hard spl and couldnt make it anymore .... when hard spl process is launched it give error 262 i think.
but now the original rom that i spoke about earlier is processing to 100% but with no effect ...
hope im clear ... what do u think?
Hey guys!
I wanted to create a thread about Bricked dhd's. The point is to show people what they need to do to have they're phones back to life.
Since I don't understand much about this, i hope that if you know what to do, then post it here
I had bricked my phone today. I was flashing a new ROM and suddenly, BANG... i don't know what happened, maybe the usb cable got unplugged for a few seconds, or maybe the way i was doing it wasn't the best way to do it (hehehe) Actually i was flashing the device with ace hack, thephone rebooted a few times for the procedure, and on the last time was the show. The white bootscreen of htc, and really nothing more, nor even "a little bit brilliant" lol
After that I found a few threads about bricked phones but none of them helped I just can't the computer to recognize the phone while in htc bootscreen, nor on Hboot screen and nor even on Recovery screen. I tried to flash a few recovery roms, with no success, but then I had a light!!!
The proccess were saying that (when applying the sdcard update.zip) the file or directory didn't exist. So I thought in changing the name of the zip folder for "update"
Didn't work... (OHHHHHH...bagga) But the result were different.
After it veryfies the update package, the error message, saying :
"E:signature verification failed"
at least the result were different, so what i'm trying to do next is to download the RUU file, with my radio, since the boot is 0.80... weird. After that i'll rename it to update and then probably it will work. If it was a problem with the signature, maybe now it should work.
Well give me your opinion and share here your knowledge so we can help the whole lot of people who bricked they're phones (and me too )
OK guys! Thanks to aahk irc help, i have my phone back!!!