Does anyone know where can I get TouchFLO 3D 2.6 for Diamond 2?
I think the closest you can get is 2.5.
where can I get TouchFlo3D 2.5?
I am using Diamond 2 with WM6.1, does it able to install touchflo3D 2.5?
Kindly advise. Thanks!
try the sunx rom manila 2.5 (!!!!!!!!!!) .. available for 6.1 and 6.5 ....
testet both and atm i think 6.1 is a bit better in speed and less bugs.. but that's just my opinion and its just a quick check^^ ....
...test it by your own ... wont be emberrasing
This is the Diamond forum, you're better off in the Diamond2 forum if you own that device.
That said 2.6 will never work with any MSM72xx devices according to conflipper. It is made for the HTC Quillin which uses a different chipset and thus a different GFX chipset.
And don't follow the suggestions of these guys, you'll probably brick your Diamond2 if you install a Diamond ROM on it.
jep sry overreaded the "2"
I have a htc diamond 1 and I would like to put the touchflo 3d manila 2.6 does this version agree has my phone ?
bl996 said:
I have a htc diamond 1 and I would like to put the touchflo 3d manila 2.6 does this version agree has my phone ?
Click to expand...
Click to collapse
No.
MANILA 2.6 WILL NOT WORK WITH OUR DIAMONDS!
ok i got htc touch diamond updated to wm 6.5 but when i click on lanch htc sense it says unable where am i able to download it again?
Related
So just got my Xperia the other day and am looking to make the jump to Touch Flo 3d. Looking on the forum here there's at least 6 different versions and I'm kinda confused on what the differences between these even are.
Can someone please clarify the difference between:
Touch Flo 3d 1
Touch Flo 3d 2
Touch Flo 3d HTC Blackstone
Manila
Manila Touch HD
Manila V2
I noticed that there's also a lot of confrontation between installing touch flo as a ROM or just running it on a panel from a CAB file. What are the advantages of either. If possible I'd prefer to keep the Xperia panels and just run Touch Flo in a panel.
Also while I'm at it since I don't think it's worth another thread, can I run the Windows Mobile 6.5 beta in a panel or do I have to install it and wipe out windows mobile 6.1?
I am quite sure that WM 6.5 needs to be installed instead of WM 6.1.
About the Touch flo's im in the same boat... i just would like the "best" version as a panel. So thank you for bringing this up
Windows mobile is the platform on which all your programs run, including the panel manager and touchflo.
There's currently two* versions of TF3D, TF3D 1 and TF3D 2. Manila == TF3D.
The best and newest at the moment is TF3D2, as stickied, it has landscape support, but it also has a few bugs, as it's a beta build. All in all, it works more that good enough.
Best thing I can recommend is flashing one of itje's ROMS, preferably the new 4.0, which has TF3D2. This way, you'll have TF3D as your homescreen, but also the panels.
* Not including different beta's.
Alright thanks a lot, looks like I'll be installing that Touch Flo 3d2 ROM then.
Quick question though. Even if I flash this I'm going to assume I'm not resetting windows mobile since the xperia interface and touch flo 3d are just "skins" for windows mobile, so I wouldn't have to reinput all my settings?
When you flash your ROM, everything will be erased.
If you however just want to install TF3D and keep everything, you will have to wait for daran_clarke to finish his TF3d .cab, which you just install on your phone just like any application.
i recommend running TF3D2 from a rom, because the responsiveness and speed is increased alot. i recommend itje's touch it landscape ver 1.1 rom, as this is the most stable and normal version, as opposed to ver 4 which is lets say... a bit different. if you are intersested i will provide the rapidlinks to this no longer available rom
Already installed itje's V4 and am extremely pleased since it hasn't crashed yet. However I tried going on youtube and the video is really choppy and out of sync with the audio, which used to not be the case. Tested it both on wifi and edge and the data speed makes no difference. Any ideas?
NiklasK said:
Already installed itje's V4 and am extremely pleased since it hasn't crashed yet. However I tried going on youtube and the video is really choppy and out of sync with the audio, which used to not be the case. Tested it both on wifi and edge and the data speed makes no difference. Any ideas?
Click to expand...
Click to collapse
Itje's V4 is (although the filename doesn't tell you this) still in it's beta stages. Some problems will still occur, but Itje is working on it.
That's the reason flext recommended you 1.1.
Am I supposed to have to reinstall the radio, because my EDGE has stopped working altogether since installing Touch Flo 3d?
NiklasK said:
Am I supposed to have to reinstall the radio, because my EDGE has stopped working altogether since installing Touch Flo 3d?
Click to expand...
Click to collapse
Nope, that seems to be an unrelated problem. I've never seen reports of EDGE failing after TF3D installation. If the problem persists, you might want to try a hard-reset (also removing TF3D again).
flashing to tf3d 2 rom
iam kinda new at this and iam trying to flash to tf3d 2 rom because the theme that iam trying to get does not work with my stock rom..
NiklasK said:
So just got my Xperia the other day and am looking to make the jump to Touch Flo 3d. Looking on the forum here there's at least 6 different versions and I'm kinda confused on what the differences between these even are.
Can someone please clarify the difference between:
Touch Flo 3d 1
Touch Flo 3d 2
Touch Flo 3d HTC Blackstone
Manila
Manila Touch HD
Manila V2
I noticed that there's also a lot of confrontation between installing touch flo as a ROM or just running it on a panel from a CAB file. What are the advantages of either. If possible I'd prefer to keep the Xperia panels and just run Touch Flo in a panel.
Also while I'm at it since I don't think it's worth another thread, can I run the Windows Mobile 6.5 beta in a panel or do I have to install it and wipe out windows mobile 6.1?
Click to expand...
Click to collapse
TouchFlo 3D 2 works in portrait and landscape mode [latest version]
TouchFlo 3D 1 has touch flo tabs but only in portrait mode
Manilla is the TouchFlo cube [it isnt touch flo 3d at all]
Manilla HD is the same as Touch Flo 1
Manilla V2, I think is Touch Flo 3D.....
Forgive me for the guessing...I don't use touch flo
Hi guys !
Looking at new manila 2.6 videos on topaz and HD, from duttys new rom, can anyone port this so it would be available for HTC TOUCH DIAMOND ?
i would very like to use it, but i dont want to buy new phone at this point
thank you so much
2 nice reviews on the diamond 2 here from pocketnow,, looking forwards
http://www.youtube.com/watch?v=igRAl0swRsI
http://www.youtube.com/watch?v=ZZhI9myqjdo&feature=SeriesPlayList&p=52A0239A0BAF7295
Gregorius said:
Hi guys !
Looking at new manila 2.6 videos on topaz and HD, from duttys new rom, can anyone port this so it would be available for HTC TOUCH DIAMOND ?
i would very like to use it, but i dont want to buy new phone at this point
thank you so much
Click to expand...
Click to collapse
be patient, devs are working on it porting it. Nothing available yet.
this looks fantastic, they did great job on finger friendly thing buttons seems bigger and easy to press, i hope it'll soon release on our diamonds too...
but what about manilla 2.5?
I can't find any rom with manilla 2.5 for gsm diamond
csjneek said:
but what about manilla 2.5?
I can't find any rom with manilla 2.5 for gsm diamond
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=541026
just check this thread...
good luck
Manila 2.6 for HTC diamond 1
Hi,
is there a way to install the last version of manila (2.6) on my HTD Touch Diamond 1 (WM 6.1) ?
Thanks
ellaia said:
Hi,
is there a way to install the last version of manila (2.6) on my HTD Touch Diamond 1 (WM 6.1) ?
Thanks
Click to expand...
Click to collapse
Only by flashing this rom at the moment.
http://forum.xda-developers.com/showthread.php?t=565078
with the Touchflo 2.1. I hate the calendar (month and day only) and want to know if there is a 2.5 download for the Tilt 2? I have seen others but they are for non-Tilt phones (Leo and Topaz). Also, I have Pocket Informant from a previous Tilt (TyTn II) and would prefer to use that for my calendar and contacts. Can I make these the default or am I stuck with the Touchflo versions?
I contacted HTC this morning...
and 2.5 is not compatible with the Tilt 2. Also they cannot/will not assist on changing the default calendar/contacts to a 3rd party application such as Pocket Informant.
Does anyone here have any advice and another course of action?
Have a look around the Rhodium ROM development forum. You CAN upgrade to Manila 2.5 (though the landscape version is still a bit buggy) and it will invalidate your warranty...
I have looked but not sure
what I'm looking for. I have searched Manilla 2.5 and Touchflo 2.5 but cannot get any hits on these queries.
StoneyBK said:
what I'm looking for. I have searched Manilla 2.5 and Touchflo 2.5 but cannot get any hits on these queries.
Click to expand...
Click to collapse
TouchFlo 2.5
Ok, but this is for the Diamond
Will is work on the Tilt 2? There was another Touchflo 2.5 developed by someone called "udk" but it was designed for the Leo and Topaz stating it will not work on the Tilt 2.
I realize I'm asking a lot of questions but I'm a relative noob and don't want to screw up my phone.
I see all these different versions (blackstone, leo, topaz) and have no idea if they are phones or operating systems, however I DO the difference between a Fuze, Pure Tilt 2 and Touch Pro 2.
http://forum.xda-developers.com/showthread.php?t=588476
this is the main thread for manila 2.5, some people have tried to use it on the tilt 2, and there are a few glitches, but nothing show stopping
Thanks, I'll give it a look
when I get home as I'm on my work pc and cannot sync with it.
just to make sure that it is clear,
Manila 2.5 = touchFlo 2.5 (it is better known as Sense 2.5)
Manila 2.1 = touchFlo 2.1 (it is better known as Sense 2.1)
so if you saw Sense 2.1 know its Manila 2.1 & touchFlo 2.1 .. just different faces for the same coin ...
dazultra2000 said:
Have a look around the Rhodium ROM development forum. You CAN upgrade to Manila 2.5 (though the landscape version is still a bit buggy) and it will invalidate your warranty...
Click to expand...
Click to collapse
It will not invalidate your warranty! As long as you flash back and remove hardspl, you will still be able to get the unit fixed under warranty. It is the same with computers with upgrades and OS changes. Bring it back to factory and there will not be any issue.
StoneyBK said:
Will is work on the Tilt 2? There was another Touchflo 2.5 developed by someone called "udk" but it was designed for the Leo and Topaz stating it will not work on the Tilt 2.
I realize I'm asking a lot of questions but I'm a relative noob and don't want to screw up my phone.
I see all these different versions (blackstone, leo, topaz) and have no idea if they are phones or operating systems, however I DO the difference between a Fuze, Pure Tilt 2 and Touch Pro 2.
Click to expand...
Click to collapse
The info on Blackstone, Leo, Topaz etc. is all here on this very site. Look in the Wiki, or Device database and you will see that the names refer to the different phones. The only ROMs you should be using are for Rhodium (HTC's internal development name), AT&T Tilt2 and Touch Pro2. Also be aware that there are CDMA versions of the Touch Pro2. Flash a non GSM version to your phone and you may brick it. If you have a Telus, Sprint or other CDMA version of the TP2, you can flash a GSM ROM to it, but you have to have a sim card to use it. You cannot flash a GSM phone to a CDMA as there is no built in hardware.
KPoon said:
http://forum.xda-developers.com/showthread.php?t=588476
this is the main thread for manila 2.5, some people have tried to use it on the tilt 2, and there are a few glitches, but nothing show stopping
Click to expand...
Click to collapse
The recent T-Mobile ROM that had been leaked has landscape built in by HTC. The link you gave is no longer needed as most cooks are using the T-Mobile leaked 2.5 sense version.
hi, i just got a htc diamond and hava a few questions...
it came with wm 6.5 and i want to put the touchflow 3d on it. is there any way i canm do it?
what is the manila thing? i saw many topics but no explanation about whats it
thanks
Pesonally I wouldn't recommend it for diamond since wm 6.5 and touchflo 3d = lot of memory usage.
But if you still want to:
Try this for TouchFlo 3d 2.1( the defult type diamond comes with but newer version of it.) : http://forum.xda-developers.com/showthread.php?t=542113
And for the Sense 2.1 ( the one with homescreen weather) :
http://forum.xda-developers.com/showthread.php?t=605252
Hi all forum members,
I found this s/w XEND Touch Flo which actually changes the touch flo theme to a red color is exiting to see as am bored with the regular pre installed blue color.
I have HTC Touch P3452 (Elf 100) and am not able to install this.
Can anyone give me a link to download the correct file and the steps to be followed to install it in my elf.
Looking forward to hear from all of you.
I hope the developers can answer this to the best.
Also is there any other way or s/w which can be used in my elf to change the look and feel of my touch flow - I guess my touch flo is a 2D version and my elf has WM 6.1 with Qvga........
Joyjeet, our devices are 3 years old (dinosaurs in terms of smartphones) and touchflo has been removed from all cooked roms because of inefficiency and appetite for ram. All this to tell you there are very few ppl who actually know about touchflo
tito12 said:
Joyjeet, our devices are 3 years old (dinosaurs in terms of smartphones) and touchflo has been removed from all cooked roms because of inefficiency and appetite for ram. All this to tell you there are very few ppl who actually know about touchflo
Click to expand...
Click to collapse
Tito - your information is nice but am not getting the answer to my question.
I want to know few things
First is how to use this xend red touch flo theme in my elf 100.
I want to know of how to upgrade my WM 6.1 to WM 6.5
I want to use the 3D version of touch flo or atleast a way to change the boring looking blue theme of touch flo present in my elf 100
I need changes
Hi
I can only answer to your 2nd question that is http://forum.xda-developers.com/showthread.php?t=426540, imho these are the best ones. Read the faq and post your device info 1st.